How to straighten faux fur after washing or storing


A frequently asked question is how to fluff up fur that has already lost much of its original appearance - the topic of our article today.

Fur on the hood has always made outerwear (jacket, down jacket, coat) more elegant, beautiful, and respectable. Among other things, such finishing always provides additional warmth in the winter cold: an impressive edge with long pile even allows you not to wear a hat, reliably protecting your ears and head from the wind and sub-zero temperatures. However, some people prefer to buy clothes without trim, thinking that keeping the fur on it in its original form from season to season will be too difficult.


The fur on the hood of a jacket often cakes after winter.

In fact, this is just a myth: fur - both natural and artificial - can be put in order, and without even going to the dry cleaner, but at home. It’s just that in some situations you will need to put in a little more effort and spend a little more time.

So how can you fluff up fur that has found itself in various unpleasant situations, save it from dirt, creases, tangles, bruises, and return it to its original spectacular appearance? Of course, there are many ways.

Important! However, many situations can be prevented if clothing is stored and handled correctly. We'll talk about this too.


It is very important to store clothes correctly and handle them correctly

How to clean fur from dust?

How to clean a natural fur coat from dust? To do this, spread a damp sheet on the floor and place a fur coat on it. Knock out the dust from both sides, hang the product on hangers, and comb it. Spray tangled and matted fur with warm water from a spray bottle, let it dry, and then comb it.

Interesting materials:

How to choose the power of a chandelier? How to choose the power of the hood for the kitchen? How to choose flooring for an apartment? How to choose flooring? How to choose floor tiles for the hallway? How to select multiple photos on Mac? How to choose a night light for a child? How to choose night curtains? How to choose wallpaper for a small living room? How to choose wallpaper for a small kitchen?

Smoothing fur after long-term storage

If the item was stored neatly - hanging, in free space, it will not have to be ironed. When it has been crumpled and folded, creases form and the pile looks untidy.

To smooth out heavily wrinkled fur, follow the instructions:

  1. Straighten the item in your hands and hang it on a hanger.
  2. When there are no creases, after combing the item will again look neat.
  3. If severe creases form, place the item in the bathroom, turn on the hot water and close the door. It is necessary to achieve steam accumulation. Leave the item for 10 minutes, then dry and comb.

You can perform the same procedure by hanging the fur over a pan of boiling water. If you have a steamer, you need to steam the back surface of the product, and comb the pile and fluff it up.

How to properly store fur items after ironing

To make a faux fur item last longer, you need to store it according to the following rules:

  • Do not roll it up or put it crumpled in a cramped closet. Such material does not tolerate constraint and is easily deformed;
  • Carefully hang on hangers in the closet, leaving free space around;
  • Place moth repellent in a closet where it is permanently stored. This pest can easily ruin any item. The cabinet must be regularly ventilated and moths must not be allowed to breed;
  • Store items in clothing cases, do not use bags or plastic.

As an insect repellent, put dry citrus slices, scented soap in the cupboard, or buy repellents in tablets and plates.

If you store eco-fur carefully, it does not need ironing. Otherwise, you will have to spend time bringing it back to its original form. Often it is enough to lightly brush the surface and it will return to its original state. In advanced cases, you will need to steam and clean it. If this item is not properly cared for, it is not always possible to return it to its original condition. When severe contamination appears, it is better to contact a dry cleaner.

Dry

If we are talking about how to wash a fur collar or a similar item at home, then first of all we will make a reservation: the best way is to wash it dry. Fur - artificial or rabbit, sheepskin, arctic fox - is a very specific material. The consequences of washing in water and at home can be very different and sometimes unpredictable. The material can not only shrink, fade, become discolored, but also come out completely, and the glued areas can spread. Therefore, we advise you to read this article and adopt the rules that will be discussed here.

The principles of washing at home for different types of fur are almost the same. Both artificial and natural fur from a rabbit or arctic fox, first you need to shake it well, and then knock out all the dust and small dirt from it. The product can then be vacuumed. Sometimes for a jacket or down jacket, a hood is quite enough to refresh their appearance.

Cleaning with a vacuum cleaner will refresh the appearance of a fur product.

Can faux fur be washed?

In fact, if you wash faux fur incorrectly, it can damage the material. That is why it is so important to follow some recommendations:

  • Faux fur does not really like high temperatures - after heating, the fabric base can soften and become deformed. Even if everything is in order with the fabric, the pile will lose its smoothness and original shine.
  • You can use the dry cleaning method, which is done only in dry cleaning. The only thing worth remembering is that not every dry cleaner has special equipment suitable for cleaning fur on artificial leather.
  • Artificial pile does not have a “pile growth” direction, so after washing it can wrinkle and begin to become shaggy. To prevent this from happening, smooth the cleaned clothing with your palms, and after the product has dried, comb it.
  • Dry items carefully. You should not use an electric dryer for drying, as this may negatively affect the quality of the fur. It is best to hang hangers so that direct sunlight does not fall on the fur coat.
  • Be very careful when washing light-colored fur, as the pile may darken as a result of improper care - if this happens, it will be very difficult to return the fur coat to its original color.

Process Features

The next question that will puzzle the owner of synthetic outerwear is how to wash a faux fur coat. Fur outfits are tidied up both manually and in an automatic machine. The main thing to remember is some features of the products:

  1. Washing in hot water will distort the fabric. The pile will become disheveled and lose its original shine.
  2. Drying should be done away from heating appliances; warm air makes the pile brittle.
  3. There is no need to repeatedly wash outerwear; it is better to partially clean it.
  4. Washing powders are harmful to fluffy beauty - unnatural skins deteriorate from frequent exposure to foam detergents.
  5. You cannot rub the material when washing - bald spots will appear.

If you are going to put your clothes in order yourself, remember that washing fur in regular powder is not permissible. Products for woolen materials will be more suitable. Suitable powders for delicate fabrics. It happens that you don’t have washing powder on hand, but you need to wash your fur coat urgently. How to wash artificial pile without special products? Instead of special liquid gel, use shampoo. Liquid soap is a good substitute for washing powder.

Manually

How to wash fur?
Most manufacturers recommend performing this procedure manually. This method is more gentle and suitable for synthetic products. If you are looking for the answer to the question of how to wash a fur hat, then you should also know - by hand. It is better not to trust such products to automation. If the pompom is not attached well, it may come off. Therefore, it is recommended to handle it by hand.

It is also not recommended to put a fur coat with long pile in the machine.

How to wash faux fur by hand:

  1. Fill the bathtub with warm water. The temperature of the liquid should not exceed 35 degrees, maximum 40.
  2. Add detergent and dilute it in water.
  3. Place the synthetic fur in a container. Press down with your hands or place a weight on top. Make sure the item is completely saturated with water.
  4. Leave the product to soak for 30 minutes. For faux fur, this time will be enough.
  5. After soaking, turn the product over to the other side and straighten the pressed pile.
  6. Then remember the thing with your hands, squeezing the pile into a fist and unclenching it. Do not rub the product, the lint will come out faster.
  7. Use home remedies or appropriate chemicals to remove stains. The synthetic fiber manufacturer prohibits the use of stain removers, chlorine bleaches, or other chemicals not intended for use on faux fur. They act aggressively on the fiber and quickly damage it.
  8. Rinse off soap suds in a bathtub with water. Don't use the shower. Strong pressure can cause the pile to come off the base, which has been softened by moisture.
  9. To completely remove soap, first rinse the product with warm water, then with cold water. This will add shine to the fibers.
  10. Add a little vinegar in the final rinse. Synthetic fur will smooth out and shine even better.

After finishing washing, all that remains is to dry the product.

How to do this without damaging the synthetic fiber?

Basic rules for drying artificial pile:

  1. Cannot be placed on the battery.
  2. Do not hang to dry near a boiler, fireplace or other heating device. The pile may become deformed.
  3. It is prohibited to use a hair dryer or other means to speed up drying.
  4. Do not hang in direct sunlight. White fur may turn yellow.
  5. To dry faster, blot the lint with a clean towel.
  6. Do not twist or squeeze the product. The pile will begin to come out and, accordingly, thin out.

Follow these rules and enjoy the results. Due to improper handling of faux fur, it may turn yellow, the pile will become shorter (it will break when twisted) and as a result, the fur coat will no longer be as attractive as before.

Technology to help

When asked whether faux fur can be washed in a washing machine, most manufacturers answer positively. The process should start with getting to know each other. Let's get acquainted with the manufacturer's wishes and test the fleecy fabric itself for possible flaws. The rule is - the shorter the comb, the better it tolerates machine washing.

When choosing a program for synthetic beauty, we opt for delicate washing. Liquid products must be used. Undissolved lumps of powder will ruin the paint. Before you see a fur coat in the washing machine, you should beat it well and clean it from adhering dirt. Next, turn the coat inside out. It's good if you have a calico bag. It is better to place outerwear in it and send it to the drum in a bag. This way the long pile will receive less damage.

You cannot wring out knitwear - the material will deform. To wash a fur coat in a washing machine without spoiling it, follow the following algorithm:

  • clean the fur coat from adhering dirt and knock it out,
  • turn it wrong side out,
  • if possible, put it in a cotton bag,
  • put it in the car,
  • pour in liquid detergent or detergent for delicate fabrics,
  • run the machine in soak mode for a quarter of an hour,
  • switch the machine to gentle rinse mode,
  • drain the water from the machine,
  • without squeezing, take out the fur coat,
  • place on hangers over a basin or bathtub and let flow around,
  • place in a dark but well-ventilated room.

To the question of whether it is possible to wash faux fur in a machine, it remains to add that at the time of washing, the joy of fur is alone in the machine. Other things cannot be placed together with the fluffy fabric. Well-dried fur should be combed with a brush.

How to wear fur items without them losing their shape

There are no secrets to wearing fake fur. The main thing is to handle the item carefully and carefully and store it correctly. Be careful not to let rain or wet snow get on your item.

When you happen to get caught in heavy rain while wearing them, proceed as follows:

  1. Upon returning home, remove the item and shake it well so that drops of water fall from the pile.
  2. Hang the item on a hanger, the back of a chair or a clothes dryer.
  3. Comb with light movements.
  4. Dry naturally.

You cannot place the item on radiators, heaters, or use a hair dryer.

Take into account body parameters and lifestyle when choosing and wearing fur comfortably:

  • Items are purchased strictly by size. When it presses, it tightens around the buttons, it will become deformed and lose its appearance;
  • Do not carry bags and backpacks on your shoulder, this will protect the lint from abrasion and falling out;
  • In a fur coat made of artificial fur, attention is paid to the sleeves. Constant friction against the car's steering wheel and armrests provokes premature wear and tear. The sleeves become ugly.

Otherwise, proper care of the item outside of use guarantees a long service life.

Preparing for washing in water

If at home we are dealing with a fur collar from a down jacket or hood that has become very dirty during wear, then water will help us. A collar made of natural or faux fur can be easily stained by cosmetics, food, drinks, etc. And such dirt cannot be washed off using a dry method. As already mentioned, washing fur in water is a risk, because... This is done at home and without special equipment. In other words, you can wash it, just be careful.

First, let's see what kind of fur we are dealing with - sheepskin, rabbit, arctic fox and do a little test. Take some water, shampoo and a couple of drops of ammonia, mix it all. Apply the solution to an inconspicuous area of ​​the material and pull it.

The product can be washed at home only if the piece of fur being tested remains without deformation - it has not spread or torn. If we are only washing the hood of a down jacket, then it is better to remove it and deal with it separately.


Before washing, you need to rub the fur with water and ammonia and look at its reaction.

Wet cleaning

If the fur of arctic fox, rabbit or sheepskin requires more thorough cleaning, you can try using wet cleaning at home. For natural or artificial material, we need warm water and a brush designed for suede. The brush needs to be moistened in water and passed in the direction of the pile of the down jacket or hood - where the fur parts are located. After the cleaning procedure, you can use a comb. After this, our down jacket or separate hood should dry, and then it can be combed again. This method is good for cases where the product has been worn for a long time, but does not have any specific contamination.

What to do to keep your fur always fluffy

You can achieve beautiful looking fur using the following techniques:

  • Comb the pile periodically. You can’t pull it too hard, crush it, or tear it. This is done with smooth movements with a metal comb or brush along the pile;
  • Proper storage. After wearing, the item should be immediately hung on hangers or laid out without creases.

You can fluff up heavy pile by treating it with the following composition:

  • 1 tsp. glycerin;
  • 0.3 l. water;
  • 0.3 l. ethyl alcohol.

Treat the lint with a cotton pad or gauze soaked in the composition. Dry and comb well. As a result of using the product, fluffiness and lightness will remain for a long time if stored carefully.

We tidy up natural fur

Wrinkled natural (as well as, in fact, artificial) fur with creases is a fairly common problem. It can get into this state for several reasons:

  • long-term off-season storage;
  • postal forwarding;
  • wash;
  • rain or snowfall.


Wrinkled natural (as well as, in fact, artificial) fur with creases is a fairly common problem.
To answer the question of how to fluff up the fur on a hood, approaching the problem in general, you can do this: let it hang or dry in natural conditions, and then carefully (! ) comb without effort. And this should be done with a slicker comb, which can be purchased at pet stores. Some craftsmen who work with this material use a special tool made from long... sewing needles. The effect of its use is truly impressive, but, unfortunately, it is impossible to find something similar on sale.

How to return a fur coat to its original appearance?

Remove yellowness Water with peroxide (1 spoon per liter) will help protect white fur products from yellowing and loss of silkiness. A solution of water and alcohol or water and vinegar, mixed in equal parts, will return the pile to its former appearance.

Interesting materials:

Is it possible to change the years for calculating maternity benefits? Is it possible to take chondroprotectors for prevention? Is it possible to take metformin for prevention? Is it possible to dilute hair dye with water? Is it possible to return the state fee if the claim is left without consideration? Is it possible to call a doctor at home if the child does not have a temperature? Is it possible to put dishwashing gel in the dishwasher? Is it possible to freeze cabbage for borscht? Is it possible to freeze apples for the winter for compote? Is it possible to exercise when you are sick?

Rating
( 2 ratings, average 5 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]