How to wash things with jewelry?
It is better to use liquid detergents as washing powder. The item must be soaked for a few minutes (no more than 5 minutes) and then rinsed in cold water. It is not advisable to use fabric softener, as the jewelry may change color and fade.
Interesting materials:
Why didn't Hitler attack Spain? Why clay with one H? Why does MSG enhance flavor? Why is Gol so cunning when it comes to inventions? Why do pigeons stay for the winter? Why do pigeons leave their chicks? Why are cooked mushrooms bitter? Why is Zucchini Caviar bitter? Why is zucchini bitter? Why do LED floodlights light up?
Sequins are falling off the dress: what to do? 4 secrets for caring for shiny dresses
If you are the kind of woman who likes to dress brightly and festively, then you should have at least one dress with glitter in your wardrobe. Most likely, you have encountered the problem of them falling off. If you ignore this problem, you can completely get rid of the outfit, as it will no longer look attractive. What to do?
Washing shiny dresses
It is not advisable to squeeze out the water; it is easier to let it drain on its own. The less you touch clothes with glitter, the better their appearance will be preserved.
For home use when cleaning clothes with glitter, it is recommended to take a weak solution of water with laundry soap, liquid detergents and shampoos.
Sequins, sparkles, and artificial feathers are integral elements of many children's works. Children love colorful glitter because of the sparkle and sparkle.
Use glitter in holiday makeup. Children's carnival costumes are decorated with sequins. Decorate holiday packaging.
But the main problem with these decorative and makeup elements is that they are difficult to get rid of.
However, cleaning glitter from clothes, hair, and floors is not a problem if you know how to clean any surface.
How to get rid of rhinestones on clothes?
A mixture of vinegar, alcohol and boric acid allows the glue to become softer. After an hour of “soaking,” the crystals will give in easily and you can easily unhook them from the item. A solvent will also help remove rhinestones from fabric without leaving a trace. The most effective is “White alcohol”.
Interesting materials:
How to return an item to eBay? How to return a product of poor quality? How to return goods received by cash on delivery? How to return ozone goods? How to return a book to the store? How to return everything as it was on the computer? How to return everything to its place in Sony Vegas? How to return all computer settings to a few hours ago? How to return keyboard input? How can I get my mortgage interest deduction back?
How to clean floors and other surfaces
Glitter is a thankless thing to clean up. Moreover, you can instantly spread it around the house. Even the big ones are so small that they can get into the smallest nooks and crannies that are difficult to get out of.
It often seems that everything has already been removed, but every now and then another shiny element appears on the floor. While multi-colored glitter can be seen and removed, transparent glitter is much more difficult to clean.
A vacuum cleaner will be the first to come to the rescue. Can be swept into a pile before vacuuming.
Wet wipes will help remove floors and furniture upholstery.
Play dough
If you have children, you most likely know how to make play dough. It's sticky and great for picking up small debris, including glitter.
You need to make a ball and roll it over the surface with glitter. Plasticine will do.
Balloon
Not only will it remove glitter, but it will also be a good lesson in how static electricity works. Inflate the balloon. Rub on carpet, upholstery, hair. Then, at some distance, move over the scattered sparkles.
Cleaning roller
Rollers with a sticky side do a good job of cleaning. Masking tape works the same way.
Flat mop
Must be used dry. Excellent for collecting glitter from floors and other flat surfaces. However, it will be difficult to remove glitter from it. It's better to take a rag and then throw it away.
What are glitter? (with picture)
Sequins are tiny sparkles that are used as decoration, usually on clothing or other fabrics. They are often round in shape, but other shapes may be available and can be found in many different colors. Glitter can be made from a variety of materials, from metals and crystals to gemstones, but today they are often made from plastic.
In competitions, skaters usually wear sequined costumes.
The origins of glitter are believed to date back to the ancient Mediterranean. The type of coin known as sikka was later translated into the modern term "spangles". Legend has it that these coins were sewn onto clothing, especially women's clothing, as a sign of wealth. Various types of scarves and other clothing were decorated with sequins, which was probably done not only to display wealth, but also to preserve coins as they were worn on the individual. The appearance was clearly attractive to other cultures and eventually became more of a fashion statement.
Sequins sparkle and sparkle, and when used to decorate clothing and accessories, they create a festive, elegant look. A sequin dress is often considered formal and may be accompanied by a sequin bag. These items are most often worn as evening wear. Other items such as capes, scarves, belts, hair accessories, etc. can be decorated with sequins and can be worn at any time.
Decorating fabric with sequins can be done in a variety of ways. An entire item of clothing or accessory, such as a wallet, can be completely covered in sequins, or they can be arranged to form designs, images, or patterns. Sequins are also often used as trim. They can be sewn to meet the edge of the fabric, or they can hang down. They can also be sewn close to the fabric. When sewn flush, they are less likely to fall off or come off easily.
Sequins are also used in a wide variety of costumes. They can be used to decorate professional costumes for performers such as dancers or figure skaters, or for amateur dances and gymnastics concerts. Other sequined ensembles may be less formal, such as a Halloween or other holiday costume.
Many crafts are also made from sequins. Animals and other creatures created as part of crafts may have sparkles as eyes. Dolls' clothing can also be decorated with them, and they can be used to add sparkle to crafts, often imitating the look of snow, light, water or jewelry.
.
Four secrets of care
Hair fixation spray
If glitter falls off your dress, use an aerosol. Hairspray can create a protective layer that prevents the sequins from peeling off.
To do everything correctly, you need to place the dress on an ironing board, floor or other flat surface. It is better to place a towel or sheet underneath to prevent the sticky product from settling on the furniture.
You need to start spraying the varnish at a distance of 25 centimeters from the surface. To consolidate the result, it is better to repeat the procedure.
Textile glue
You need to dilute the glue in water to make it more liquid. Take a brush and use it to apply the composition to the surface of the glitter. Everything must be done extremely carefully. To dry your dress, do everything in a warm room. Before leaving the item to dry, make sure it lies flat and without wrinkles. As soon as the dress dries, you can safely put it on.
Soap solution
If you wear shoes with glitter, you need to be extremely careful. Obviously, you can't walk on air, so dust, moisture or dirt will fall on it. To easily clean your shoes of all this, use a toothbrush. Wipe your shoes with a soft cloth, mix water and soap, and then dip the brush into the solution. Wipe off the glitter, which will become bright again.
Plastic bag
It is needed for storage. To prevent glitter from falling on the floor, table and other interior items, it is better to wrap clothes or shoes in bags.
How to remove a stain from pine glue?
Traditional methods
- Apply vegetable oil to the pine resin;
- Rub with moderate enthusiasm - this will soften the resin;
- Apply dishwashing liquid to the dirt - it will degrease the surface after treatment with vegetable oil;
- Wait 30 minutes and wash your clothes.
16 Dec
2022 Interesting materials:
How to disable application updates in Android? How to disable the Fn button in the BIOS? How to disable digital signature verification in BIOS? How to disable SATA in BIOS? How to disable USB ports in BIOS? How to disable hibernation in a domain? How to disable history in Google Chrome? How to disable the camera and microphone in Skype? How to disable application updates on your smartphone? How to disable offline mode on Steam?
Hand overlock seams
It is easy to process the cut parts if the needlewoman has an overlocker in her arsenal. This machine was invented not so long ago, so dressmakers knew how to do without it, performing many finishing and connecting seams by hand.
This is not difficult to do; all you need is a regular needle and thread. Please be patient, as the process will take a long time if all sections of the product need to be processed.
The following seams are used for hemming:
1. Oblique. Stitches are made at an angle, moving from left to right, capturing 3 mm of fabric; there is no need to form loops. Use it on fabrics that are not very frayed.
2. Looped. Formed by pulling the needle under the stitch when it is not yet tightened. The distance between the punctures is adjusted depending on the degree of fiber separation. To hold them together, the seams are laid as tightly as possible.
3. “Twist” is best suited for highly stretchable, slippery and low-density pile fabrics. The needle is inserted in such a way that the cut is neatly twisted, forming a roller; the stitches are laid quite tightly to each other without forming loops.
If you need to hem the bottom of the product and at the same time overcast the edge of the cut, use a goat seam. Its shape is cross-shaped due to the fact that the upper and lower folded edges are alternately captured. In this case, the stitch is laid diagonally, then in the opposite direction, intersecting. Used on thick fabrics.
Basic methods
Rhinestones come off when heated and when cooled to sub-zero temperatures. Remove glitter from clothes using solvents.
Special soldering iron
The decor is usually fixed to women's wardrobe items using thermoplastic glue, which is applied to rhinestones and stones with a gun. The following is used as a basis for the composition:
- epoxy resin;
- PVA on water;
- silicone;
- acrylates;
Without heating, apply “Second” and “Moment” to the fabric, which contain cyanoacrylate. Rhinestones are fixed to the material with PVA glue, but the sparkles quickly fall off when worn. Decorative elements are first lubricated with an epoxy compound and heated to secure it to clothing.
Glitter glued using heat treatment is removed with a soldering iron.
The device, which can be bought at a kiosk or store that sells things used in sewing, is plugged into an outlet. When the soldering iron is hot, apply it to the decor. The base will melt and the glitter can be easily peeled off by lifting it with tweezers. Remaining substances are wiped off with a solvent. To avoid burning your hands, the device must be handled with care.
Working with organza and satin: making decorative elements
Clothes for special occasions, for example, wedding and ball gowns, are trimmed with fabric flowers. Organza and satin are best suited for these purposes. They hold their shape, the petals are at the same time tender, but not deformed. Working with these fabrics is not easy - craftswomen know how much they fray. Processing with a needle and thread is not a suitable option for making flower buds.
There are special tools and devices for this. Cut out parts from organza using hot scissors (electrical device), and from satin using a needlework needle. The petals are shaped using special attachments - bulbs. In this way, even small parts are obtained whose edges do not crumble.
Sewing is a fascinating type of needlework; it requires patience and perseverance from the craftswoman. But if you set yourself the goal of getting a beautiful, exclusive product, be it an element of your wardrobe or decor, you should not regret the time and effort spent. The result will exceed expectations if the work is done carefully.
