How to completely clean the surface of frosted glass from greasy stains

Modern stylish home furnishings, especially kitchens, are often decorated with glass with a matte finish, which is often contaminated not only by drops of vegetable oil and other fatty liquids, but also by the sweat and grease traces of human hands. It is not so easy to remove such contaminants from matte surfaces without damaging the surface protective layer. Therefore, in this article we will take a closer look at how to wash frosted glass from greasy stains at home and preserve the beauty and aesthetics of its appearance.

Main causes of pollution

Before you start cleaning up contaminants, you need to familiarize yourself with the main reasons for their occurrence.

Most often, dirt on the glass door surface appears due to high dust levels in the room. If you do not clean your apartment for a long time, dust particles will begin to settle on the glass and gradually accumulate. Therefore, it is recommended to regularly do wet cleaning to keep the room dust-free. Each room must be cleaned at least once a week.

Handprints

Some people touch the door glass with dirty hands, and because of this, hand marks remain on it. Regular glass coatings are easy to clean from such prints, but matte surfaces are much more difficult to wipe off. Difficulties arise due to the following reasons:

• unevenness and roughness that complicate the cleaning process;
• matte coating that absorbs dirty stains.

Dried splashes and drips of water

Doors with opaque glass inserts are often installed in bathrooms. After using the doors for a long time, dried splashes or even water stains appear on them. Such stains are considered the most harmless, since they are the easiest to wipe off. To do this, just wipe them with a cloth soaked in soapy water.

Stains from grease, soot and food

Such stains appear on structures that are installed in the kitchen. The main feature of these contaminants is that they are absorbed into the surface of the doors and into the frosted coating of the glass. Therefore, it is very difficult to clean products from traces of soot or grease. You will have to use special detergents that contain substances to combat greasy stains.

Street dirt

Residents of private houses often encounter street dirt on their door coverings. Most often it appears on products that are installed in the loggia or veranda. It is easy to get rid of ordinary dirt, as it can be easily washed off with water.

Homemade Cleansers

You can wash cloudy elements in interior doors using improvised means, which are found in every home. A good cleaner is ammonia; it removes fingerprints, tea and grease stains. Two tablespoons of ammonia are dissolved in a liter of water. Moisten a soft cloth with the resulting product and wipe the glass inserts. Next, dry it using microfiber or suede cloth. After completing the cleaning procedure, be sure to ventilate the room.

Potato starch is a wonderful preventative. It will clean the door glass from minor dirt. You need to dissolve 18 grams of starch in a liter of water, wipe the glass elements of the door with the resulting mixture, and then dry them with microfiber.

To get rid of light stains, you can use a honey solution: dissolve 2 tablespoons of honey in water. Spray the resulting liquid onto the glass from a spray bottle, wait until it dries completely and remove with a paper napkin.

A vinegar solution removes stale grease and coffee stains well. To do this, you need to mix vinegar with warm water, wash the glass elements with this mixture, and finally wipe the glass surface with a well-absorbing cloth.

Folk recipes

There are several folk remedies that will help clean the matte surface on glass.

Ammonia

The most popular cleaning agent for coated glass is ammonia. It is used to prepare a detergent that effectively fights almost any stain. To prepare the solution, add 10 milliliters of ammonia to a liter of water. The mixture is sprayed with a spray bottle and rubbed with a cloth. After this, the wiped coating is washed with cold water.

Vinegar 9%

Experts advise using vinegar liquid to clean glass. It will help get rid of ordinary dust and wipe away stubborn greasy stains. To prepare the solution, add a tablespoon of apple cider vinegar to a glass of water. Then soak a rag in the solution and wipe the door with it. To prevent the coating from smelling like vinegar, it is washed again with soapy water.

Baking and soda ash

Sometimes vinegar and ammonia do not help clean the surface of the glass from dirt and you have to use soda ash and baking soda. It is added to water in a ratio of one to five, after which the matte product is treated with the soda mixture. You can also not dissolve the soda, but simply rub it into the surface, rinse with water and wipe with a dry towel.

Powdered chalk or starch

If there is a lot of dirt on the glass surface, you can use starch or chalk powder from which a cleaning solution is prepared. To do this, add 45 grams of the substance to 500 milliliters of water, after which the liquid is thoroughly mixed. Then soak a cloth in a container with the mixture and wipe the glass with it. Remains of chalk are wiped off with a regular dry sponge or rag.

Denatured alcohol, vodka and cologne

An effective means for cleaning dirt can be prepared from cologne, regular vodka and denatured alcohol. All components are mixed in equal quantities. Then the liquid is evenly applied to the dirty surface and left for 10-15 minutes to soak in the dirt. After this, use a rag soaked in water to wipe off the remaining dirty marks.

Sometimes people don't want to use cleaning fluids, so they steam the frosted glass instead. For this, a special steam generator is used, which not only removes dirt, but also degreases the door. Steaming should last for five minutes. Then wipe the cleaned surface with a dry cloth to remove any remaining moisture.

Chalk mixture and bleach solution

When cleaning matte surfaces, it is recommended to use a solution made from bleach. It is able to clean it of dirt and absorbed fat. To create the mixture, add 20 grams of lime and 25 grams of grated chalk to 800 milliliters of water.

The glass is sprayed with the prepared solution. After 15-20 minutes, wipe it dry with a towel or napkins.

Potassium permangantsovka

To combat old stains, you can use a manganese solution. When preparing such an effective manganese mixture, 55 grams of manganese are added to a liter of boiled water. The solution is stirred until it turns a dark reddish color. Moisten a sponge in the prepared liquid and wipe the surface of the door glass with it.

Required tools and materials

You need to choose the right tools for cleaning frosted glass. Allowed to use in work:

• Means and compositions for cleaning windows and glass surfaces;
• soft rags;
• microfiber cloths;
• plastic or rubber spatula;
• soap-water solution;
• acetone, ammonia, vinegar, chalk and alcohol;
• alcohol-based solvents.

Homemade chemicals and solutions will help you get rid of grease stains and more, without much effort. Before using them in your work, you should carefully read the instructions and the list of surfaces to be treated. Strictly follow the dosage and application rules. It must be remembered that frosted glass has a coating layer and is very easy to damage.

You can try to remove old stubborn stains with a steam cleaner, setting it to the “Continuous suction” mode. Dishwashing detergents do not contain abrasive components; they can also be used at work.

Except for those that contain acid, for example “San Klin” or “Shumanit”.

Cleaning frosted glass on a door - choosing a product and instructions for use

No matter how impressive and original paneled doors with frosted glass may look, they have a significant drawback; slightly rough inserts quickly get dirty, stains, stains, and fingerprints are clearly visible. Consequently, these models require more frequent maintenance. And it's not that complicated. You just need to figure out how to quickly and easily clean glass stains on doors.

Step-by-step instruction

To clean frosted glass, just follow a few steps:

1. Soak a sponge or soft cloth in warm, clean water.
2. Apply cleanser to stained areas and scrub lightly.
3. The final step is to remove the residue and polish with a dry cloth.

Important: Be sure to use a soft cloth material for cleaning and polishing - it will better clean out the micro-depressions that form matte moiré and will not damage the structure.

Wash the frosted glass on the doors as carefully as possible: do not allow strong drips, do not press on the edge, trying to clean a thin strip along the strip. Otherwise, it is easy to damage the door, squeeze out or break the glass.

A fresh stain is easier to remove. Therefore, it is recommended to treat the matte surface immediately.

Store formulations

"Mister Muscle"

Just the name of a detergent often brings a smile, so tired of annoying advertising. But if you look through thematic forums and analyze the reviews of housewives, then most people prefer this cleaning product. This is one of the best options for removing dirt from frosted glass.

But "Mr. Muscle" is effective if the panel is only slightly dirty. It is powerless against a layer of dirt and oil stains. And the expense of funds turns out to be large; Taking into account the cost, use in such cases is hardly advisable.

"PRIL", "Ajax"

These products are great for cleaning glass stained with grease. It is enough to moisten the base with water, “walk” several times with a soft cloth (napkin), and it will quickly acquire its original appearance.

Detergents

There are enough “chemicals” to clean dishes: sprays, gels. They can be used to remove dirt from glass. Effective for combating adhering dust, drips and stains. These compounds will also easily rid the surface of “greasy” fingerprints.

Alcohol-containing products

They are considered one of the best for cleaning frosted glass. Literally everything is removed - drops of fat, traces of coffee (juice, tea), glue, mastic, putty and so on. But drugs in this group should be used with caution.

• Paneled doors from different manufacturers differ in the way the inserts are attached and the materials used to seal the gaps. Alcohol corrodes silicone seals (gaskets), and if they are the ones that are installed, you should choose a different detergent.
• It is important what exactly is diluted in alcohol. Some preparations leave streaks and stains on the base after drying. And while this is not critical for most surfaces, it matters for frosted glass. Before use, you should drop the product somewhere in the corner of the panel and see what remains on it after the alcohol evaporates. If the test result is positive, you can safely wash it.

Overview of cleaning methods

You can clean frosted doors or tables using household chemicals or traditional methods.

The use of aggressive substances will make the procedure quick, but unsafe for the owner. Home remedies will increase the duration of cleaning, but will not affect the health of the household.

Traditional methods

Glass and furniture cleaning products can be found in any home or in a hardware store or pharmacy. Use fresh solutions; during storage, the active substances may evaporate or precipitate.

Proven recipes:

• chalk gruel is a soft abrasive and adsorbent that removes fat from the surface. 1 glass of water, 3 tbsp. spoons of crushed calcium carbonate. Apply the product to the spot. Leave until the chalk paste dries completely. Then remove hardened particles. Rinse off any remaining product with plenty of clean water. Potato starch gruel has a similar effect;
• Ammonia solution perfectly degreases and cleans. For 1 liter of water you will need 1 tbsp. l. ammonia. Moisten the stain and rinse with plenty of water;

• vinegar - proportions similar to ammonia. Dampen old stains and leave for 5 minutes. Rinse with water. Rinse the remaining areas with vinegar solution;
• potassium permanganate – degreases surfaces. The color of the solution should be pale pink. Potassium permanganate is non-toxic; crystals should not be allowed to get into the eyes or mucous membranes;
• acetone - copes with tea or coffee stains. Use a solvent to clean oily areas. Other surfaces are not treated. After removing dirt, rinse with a large volume of water.

After removing dirt, wipe the glass with a microfiber cloth. It leaves no fibers and absorbs water.

Household chemicals

Specialized products are the best way to clean glass interior items. Allows you to clean surfaces in the shortest possible time.

To clean a frosted door, use liquid or gel preparations. Products from the “Mr. Muscle” or “PROFOAM 3000” brand and other manufacturers are perfect.

Surface treatment technique:

1. Apply cleaning agent and foam.
2. Leave for 10 minutes.
3. Remove the product with a rag or rubber spatula.
4. Rinse with water.
5. Wipe with a microfiber cloth.

If detergents do not help, the best way to wash glass surfaces is with a vacuum cleaner, steam generator, or steam mop. The steam temperature is more than 100 degrees, follow safety precautions.

Folk recipes

Not everyone trusts industrial “chemistry”, and sometimes it is simply not at hand. How else can you clean frosted glass?

• Vinegar solution. Prepared in warm water; concentration is weak. It is enough to remove minor contaminants, and it will completely replace the same “Mr. Muscle”. But it is used only after cooling.
• Chalk solution. The effect is similar to the use of store-bought drugs such as “PRIL”. Removes drops of glue and grease well. The recipe is simple - 2 tbsp per liter of water. spoons. After thorough mixing, the mixture is strained and the solution is applied to the surface by spraying. A simple household spray bottle will do. After drying, a napkin, soft cloth, or even a sheet of paper removes the chalk, and with it the dirt.
• Ammonia solution. Diluted in the proportion of a tablespoon/glass. It perfectly removes small stains and stains on frosted glass.

Traditional methods for removing streaks and stains from a matte surface

1. The vinegar solution removes all kinds of stains and simple stains well from the rough surface of frosted glass. Preparing such a solution is quite simple. Add 2-3 tablespoons of regular table vinegar to 1 liter of water at room temperature. You can easily remove all stains with a sponge or rag soaked in vinegar solution.
2. Many experienced housewives recommend dealing with dirty stains using a soap solution. Preparing such a homemade product is quite simple: grate a little laundry soap (1-2 tablespoons of shavings) and dilute it with warm water. You can wash the matte surface with this product quite quickly, but then you should wipe it several times with a clean damp cloth so that no whitish residue from the soap remains.

1. Homemade ammonia spray also copes very well with various stains on a matte surface. Immediately before cleaning, you should pour half a liter of cold water into a spray bottle and add 2 tablespoons of ammonia. Spray the resulting solution onto the surface requiring cleaning and wipe with a dry cloth - the glass will become perfectly clean. This product will also protect the surface from dust.
2. To ensure that the semi-transparent door inserts always remain clean, you should wipe them with a velvet cloth almost daily. This will prevent dust from settling and further contamination.
3. In order for the matte inserts to acquire their characteristic pleasant shine, they should be wiped with starch dissolved in water. For 1 liter of cold water, add 1 heaping tablespoon of potato starch and stir. When excess starch settles to the bottom, soak a napkin in the solution and wipe the glass surface.

What to pay attention to

Caring for frosted glass has its own specifics, and before choosing a product to wash the insert, you need to make sure that it is not its plastic counterpart. In appearance they are almost identical, but in properties they are not. And what is good for one material may well harm another. The simplest testing is done like this; if you lightly hit the panel with a metal object, and the sound will be clear - silicate glass, only frosted; more deaf - a polymer-based substitute (plexiglass, plexiglass).

Not all preparations are suitable for washing matte inserts. Products that contain:

• organic solvents;
• alkalis or acids;
• gasoline, even aviation gasoline;
• abrasive components. As an example, detergents and tooth powders. And even more so various brushes and scrapers.

So that after washing the frosted glass there are no streaks on it, it must be wiped dry immediately. If moisture remains on the surface, then after it evaporates, characteristic “patterns” will certainly appear.

In most cases, even the best preparation does not help to clean glass from dried drops of grease. A good solution is to soften this layer; then it can be easily removed with a damp cloth. At home, you can use a steam cleaner (suction mode) or a modern iron with this function.

Ordinary starch gives the characteristic shine to frosted glass; it is diluted at the rate of a tablespoon/liter and used to wipe the insert. After this treatment, dust and dirt will not stick to it, and your fingers will not be imprinted. It is advisable to practice weekly.

It turns out that choosing a product for cleaning frosted glass is not so difficult. It remains to add that if you regularly monitor the condition of the doors, you won’t have to waste time looking for medications and cleaning the panels. In this regard, the advice is simple - you need to wipe the inserts daily with a soft cloth, preferably velvet or suede. And then frosted glass will always look perfect.

Advice from professionals

Knowledge of the subtleties of caring for matte surfaces, and most importantly, their daily use, greatly facilitates the task of washing and prevents the formation of stains that are sometimes difficult to deal with. Care instructions:

1. The matte surface of the glass should be washed with cold water, and after washing, wipe immediately with a microfiber cloth.
2. If you want to add shine to a matte surface, then treat it with a water-starch solution (for 1 liter of water you need a tablespoon of potato or corn starch). Wash the glass with this mixture and wipe it dry.
3. Daily wiping of matte inserts or products made from it with suede or velvet will keep them clean and attractive.
4. It is better to wash frosted glass in the evening. This way, the likelihood of exposure to ultraviolet radiation is minimized. Its impact may cause the surface to become dull.

Following these simple rules for care and cleaning will help you quickly and efficiently remove unwanted dirt without harming surfaces. When deciding to install them (this applies to interior doors) or buy (furniture sets and household items made from it), you should know that caring for them is somewhat more difficult than for glossy surfaces. And if they already exist, then they should be looked after, washed and cared for correctly. You already know how to do this, strictly follow the technology, and your matte surfaces will always be clean and undamaged.

Removing greasy stains

Sandblasted glass quickly becomes dirty due to its roughness. This surface is tricky to clean. It clearly shows greasy fingerprints, which cannot be removed without special solutions.

How to clean frosted glass:

1. Dissolve 1 tbsp in 1 liter of water. l. ammonia. Take a rag, soak it in the mixture, and wipe off any oily stains. The remedy works, but slowly. Rub harder. Wipe the doors with a dry cloth.
2. Use 1 tbsp as a detergent. l. vinegar, 0.5 tbsp. l. salt and 0.5 liters of water. Stir the solution until the salt crystals dissolve. Strain. Treat the frosted glass on the door with the mixture and dry with a napkin.
3. Laundry soap cleans perfectly. Grind, dissolve in warm water, whip up foam. Apply to dirty glass, rub with microfiber, rinse with water.
4. Starch will save you from glue and fresh grease stains. How to wash frosted glass: dissolve 1 tbsp in a liter of water. l. starch. Treat the glass surface with the product. Wipe dry.
5. Cleaning with potassium permanganate will help with coffee and greasy marks on expensive glass. Make a saturated solution. Using a sponge, treat the frosted glass on the door, rinse with running water, and dry.
6. Baking soda is an abrasive and cannot be cleaned with dry powder. You can make a paste. Mix baking soda with water until you get a creamy consistency. Apply the paste to dirty surfaces. Wait 10–15 minutes. Rinse the treated area with water, then the entire door.
7. Acetone or alcohol works great on tea and coffee stains. This technology is also suitable for cleaning frosted glass from office glue and coloring liquids. You will need 2 Freken Bock napkins. Soak one napkin in alcohol and clean contaminated areas. The second is to wipe dry. Clean the glass on the door carefully, without touching the seals and silicone gaskets.

How to remove difficult stains

To remove old grease stains, use alcohol or acetone. To do this, soak a soft cloth or cotton pad in the solution, then wipe the contaminated area. Make sure that the product does not get on the seal, trims or moving parts of furniture or doors. If this happens, immediately rinse the solution with warm water and wipe dry.

A chalk solution will provide effective and safe removal of grease and plaque, stains from food and drinks, traces of glue, tape and paint. To obtain the product, mix two to three tablespoons of crushed chalk or chalk powder with a glass of cold water. Spray the resulting mixture from a spray bottle onto the surface and leave until it dries. Then carefully remove the stains with paper or a napkin.

Instead of chalk solution, bleach or ammonia is also used. In the first case, add 50 grams of lime to a liter of water and mix. The cleaning method is the same as with chalk. To prepare an ammonia solution, add a spoonful of ammonia per liter; for a vinegar mixture, add a spoonful of vinegar per glass of water.

You need to moisten a soft cloth in ammonia or vinegar solution and begin to wash the affected areas of dirt. To make the work more efficient, take a special chamois for glass surfaces or a rubber spatula. After treatment, wipe the surface with a damp cloth and wipe the glass dry.

In addition, difficult stains can be removed using steam. To do this, use a steam generator or steam mop. Water vapor effectively removes greasy and old stains, food and finger marks, and helps fight mold and mildew. The steam generator is suitable for almost every material, including frosted glass.

We learned what to use and how to clean the frosted glass on the door. By the way, the methods listed are suitable for washing or cleaning shelves, tables and other furniture made of this material. Now let's learn about regular care of frosted glass, which will allow you to maintain the products in proper shape.

Removing other stains

The problem of removing stains is difficult to solve due to the rough surface. Not all cleaning products for mirror coatings and glass are suitable.

How to clean frosted glass on doors:

1. Use a chalk-based solution. Pour 200 ml of water into a container, add 3 tbsp. l. crushed chalk. Take a suede cloth and sandblast it on both sides. Pay special attention to stains. Treat dried contaminants more strongly and leave to acidify. Remove any remaining composition with warm water and wipe the surfaces dry.
2. For severe stains, bleach will help. Dilute 50 g in 1 liter of water. Treat only dirty areas. Wait 5 minutes, rinse with water.

For interior doors with frosted glass, a steam mop, steam cleaner or steam generator is suitable. The kit includes a special nozzle. It looks like a point nozzle with a rubber scraper.

How to wash glass on a door: you need to start spraying steam from a distance of 30 cm (so as not to damage the sandblast), gradually heat the surface, bringing the nozzle closer.

The cleaning method does not require the use of household chemicals, copes with any stains, kills fungi, bacteria and mold. You cannot use a steam cleaner to wash glass when the temperature outside is below freezing (even interior doors). A sudden change in temperature will cause cracks to appear. Instead of a steam cleaner, use an iron with a steam function.

Choosing the best product in the store

Clean dirt from such surfaces with a soft cloth. Preferably made of suede or microfiber. An easy way to remove greasy stains is to use a special detergent for matte surfaces. Currently, it is not difficult to find such a product in stores selling household chemicals. As a rule, you will be offered several options. They will vary in price, quality and manufacturer.

Among expensive detergents, Amway products are considered very effective. Users leave positive feedback about them. “Mr. Muscle”, “PRIL” and “Ajax” are also extremely popular. These detergents are gentle and effective, and also have a pleasant smell. As a result, the kitchen will be fragrant and clean. So there are many options on how to remove grease stains from frosted glass on a door.

Household chemicals to help

Cleaning frosted glass from difficult stains is carried out with compounds from a professional line. Use industrial products and gloves. First, work on the dirt, after which the glass is washed completely.

1. Ajax Super Effect perfectly cleans matte surfaces without leaving streaks. Allows you to achieve shine, a convenient applicator makes application easy. Apply the composition from a distance of 20 cm. There is no need to rinse with water. Wipe with a clean and soft cloth.
2. Mr. Muscle is one of the best options for sandblasting stain removal. The product helps if the surface is slightly dirty. Mr. Muscle does not help with thick layers of dirt, greasy and oily stains.
3. Ecover is an ecological super-cleaning spray. Cleaning frosted glass is not a problem for him. Ecover is biodegradable and does not harm the environment. Does not contain synthetic fragrances, suitable for heavily soiled surfaces. How to clean frosted glass on doors: apply to a dirty area, wait a minute, wipe with a sponge, rinse with water. This cleaner will keep your sandblaster sparkling like new.

When choosing cleaning products, you need to make sure that it is not its plastic counterpart. In appearance they are almost identical, in properties they are not.

It is recommended to wash glass with household chemicals once every 2 weeks. The rest of the time, clean with soapy water.

The main difficulty is that sandblasting is difficult to wipe dry. They don't use newspapers. Only frequent changes of microfiber or suede cloth will help.

Soap solution

Use a soapy solution to knock out fresh dirt:

1. Apply to a sponge. Rub dirty areas thoroughly.
2. Wash with lukewarm water.
3. Dry with a soft cloth.

The soap solution is also suitable for prevention. Clean frosted glass with it at least a couple of times a month.

You may also be interested in: How to get rid of the smell of diesel fuel on clothes

What not to clean

Sandblasting should be cleaned carefully. Not all products can be used to remove contaminants.

What you should not use to wash frosted glass on doors, cabinets and other interior elements:

• cleansers based on fluorine, silicone, acids;
• alkaline compounds;
• hard brushes and scrapers;
• abrasives (mustard, tooth powder);
• gasoline.

The use of these products will damage the sandblaster. Scratches form.

What products should not be used?

Certain products should absolutely not be used to clean frosted glass surfaces. This. First of all, it is due to their rudeness and toxicity. You can ruin the coating on the glass or cause permanent scratches.

Under no circumstances should the glass surface be rubbed with a wire brush or metal scraper. Do not use detergent powders with abrasive particles. It is strictly forbidden to use alkaline and acidic solutions in everyday life, which can lead to poisoning. You should not try to clean glass with gasoline or diesel fuel.

Rules of care

Cleaning glass is a tedious and time-consuming process. Maintenance of frosted glass must be correct. Some recommendations must be followed to avoid surface damage.

How to care for glass:

1. A solution of glycerin and alcohol made in a ratio of 20:1 will help prevent fogging.
2. Remove dust frequently with a microfiber, suede or wool cloth. To keep it from sitting down longer, add a few drops of essential oil.
3. Do not press on the surface.
4. Wipe with light circular movements on both sides.
5. To prevent streaks from remaining on the surface after using detergent, it is necessary to rinse the glass with cold water and immediately remove excess moisture.
6. To keep the surface clean longer, treat it with car polish.
7. Do not allow sunlight to come into contact with wet sandblasting. When exposed to ultraviolet rays, the surface becomes dull.
8. Do not touch frosted glass with your hands. There will certainly be greasy fingerprints on them.
9. Do not allow surfaces to dry out on their own. There will be divorces.
10. After cleaning, rinse with vinegar solution. It disinfects surfaces. After such cleaning, the treated inserts will remain clean longer.

Caring for sandblasting will not cause much difficulty, but will help maintain its original appearance for many years.

Remove stains on frosted glass as soon as they appear. Sandblasting care has its own specifics. Choosing the right detergent is easy. The main thing is to clean the sandblaster regularly; you won’t have to waste time looking for preparations and cleaning the panels.

Preventive measures

To keep the glass always clean:

1. do not touch it with your hands, face, or body;
2. try to convince children that glass is not a toy, they should not touch it or play with it;
3. You should regularly wipe the glass with a dry cloth; it is better to give preference to suede;
4. there is no need to wash or regularly wipe the glazing with a rag or sponge with plain water - this will only leave stains.

It is impossible to completely eliminate greasy stains on frosted glass, especially when it comes to inserts in kitchen units. However, if you clean the surface regularly, at least once a week or two, the marks will easily come off and cleaning will not take longer. Neat glass and mirrors are an important touch in the reputation of the owner of the house.

Why do glasses get dirty?

The choice of cleaning agent for a matte surface depends on the type and degree of contamination. What most often spoils the appearance of opaque glass?

• Dust is their main enemy. The rough texture literally attracts this type of pollution in any room.
• Handprints. Like dust, they remain on the glass of interior doors, wherever they are.
• Dried splashes and water drips are a “disease” of glass installed in the shower.
• Stains from grease, soot and food appear on the matte parts of doors, tables and cabinets in the kitchen.
• Street dirt stains the glass of the veranda and loggia.

A regular damp cloth can handle light, fresh stains. To remove old stains, you will need special cleaning products.

Trying to wash away old greasy stains

As already mentioned, old greasy marks are much more difficult to remove than fresh ones. Therefore, we will consider possible options on how to remove a greasy stain that has already dried out and become old.

Laundry soap with ground black pepper

When old stains are found on a matte finish, it is unlikely that anyone will be able to get by using a detergent, since this requires a special approach. In order to effectively clean stubborn stains that appeared a week or a month ago, the following method will help:

1. You should take a foam sponge, 72% laundry soap and a little powdered black pepper.
2. It is recommended to thoroughly lather the sponge with soap and sprinkle 2-3 grams of black pepper on it (this is about half a small spoon), apply it all to the affected area and rub until the fat disappears completely.
3. At the end of the treatment, all soap stains should be removed with clean water.

Vinegar

But you can also get rid of dirt on a matte surface by using a vinegar solution, which is prepared by mixing a glass of water with one tablespoon of 9% table vinegar. All affected areas are treated with the resulting mixture. At the end of the procedure, it is recommended to remove all stains with clean water.

Folk recipes (checked by the editors)

The matte surface gets dirty regularly, so it makes sense to use inexpensive home remedies to care for it. Great for cleaning frosted glass:

• Ammonia. To wash a matte surface, 1 tsp. alcohol is diluted in 5 liters of water. It cannot be used in its pure form, as ammonia will damage the coating.
• Vinegar 9%. Mixed with water (1 tbsp per 200 ml) removes stains of various origins. To enhance the effect, add 3-4 drops of dishwashing liquid to the composition.
• Soda. It removes grease well, but for opaque glass it is only suitable in dissolved form (1 tbsp per glass of water). The fact is that soda is a crystalline powder, and in its pure form it will scratch the canvas on the door or the matte surface of the table.
• Crushed chalk or starch. Mixed with water (1-2 tbsp per 200 ml), both powders are used for routine cleaning. They also cope well with fresh greasy stains. To wash away more serious stains, the solution is supplemented with vinegar and alcohol.
• Denatured alcohol, vodka, cologne. Liquids containing alcohol give good results, both in pure form and in combination with other detergents.

Traces of flies or cockroaches can be cleaned with onion juice. The head is cut in half and the dirty cloth is wiped.

Verified by the editors:

The task ahead was to clean the frosted glass on the door from old greasy stains. To begin with, the surface was washed with a solution of ammonia (1 teaspoon per 5 liters of water). Shine and cleanliness, but those same stains remain.

We continue the test and try the starch (1 tbsp per glass of water), pour it into a spray bottle (you can do without it). Apply to glass.

We evaluate the result: not to say that the matte surface has become shiny, but the stains have been washed away.

Conclusion: the products work, just don’t forget to shake the starch solution before use.

Baking and soda ash

Baking soda and soda ash are another warrior for fighting fresh stains. It is also quite good in combating traces of coffee and glue.

1. Wet a paper towel. You pour baking soda on it.
2. You clean the dirt.
3. Wash with water and wipe thoroughly with a soft cloth.

Industrial detergents

No less effective at removing stains on frosted glass:

• Laundry soap. A piece of the bar is grated on a coarse grater. The resulting shavings are mixed with warm water. The solution is suitable for routine wet cleaning. Works well on dirt and fresh greasy stains.
• Dishwashing liquid. Like soap, it is used to clean simple stains and pre-wash frosted glass. It is applied to a damp cloth or the soft side of a sponge, and then to the surface.
• Glass products. Compositions containing ammonia or isopropyl alcohol will also clean matte surfaces. For routine cleaning and removal of recently appeared stains, for example, “Mr. Muscle”, “Clin”, “Help” are suitable. A more serious problem will be solved by “Fratty Cleaner”, “IKeep!”.

Dishwashing detergents

Just be aware: dishwashing detergents contain a lot of foam. Clean it with a sponge or microfiber. The most powerful remedies include:

1. "Mister Muscle". With its help, you can easily remove dust and small greasy dirt on the frosted glass of the door.
2. Pril and Ajax. Will overcome old greasy stains, remove traces of glue and grease

The sun's rays harm wet matte surfaces no less than all those annoying vampires. Therefore, clean in the evenings.

Remove stains and add shine

Any cleaning product will show good results only if it is used correctly. Frosted glass should be washed in the following order:

1. Moisten the glass sheet with a soft cloth or sponge soaked in warm water.
2. Using top-down movements, clean the dirt with a solution of laundry soap or dishwashing gel. Then remove the remaining product with warm water. If an industrial glass cleaning liquid is used, wipe the surface with crumpled paper or a dry cloth.
3. Using the selected solution, old stains are removed if previous formulations have not dealt with them.
4. Using a spray bottle, spray the glass with a solution of chalk or starch and leave it until dry.
5. Use a dry cloth or crumpled newspaper to clean off the powder and rub the surface until it shines.

If the glass requires cosmetic care, a solution of chalk or starch is sufficient to clean it. Then the treated surface is polished.

Potassium permangantsovka

Potassium permanganate will remove old coffee and greasy marks, and will also cope with fresh glue stains:

1. Put a little potassium permanganate in warm water.
2. You stir. Do this until the liquid turns a rich dark red color.
3. Apply to a sponge and wipe the glass.
4. Wash with running water and dry with a soft cloth.

It will also be useful: How long do fresh champignons last in the refrigerator?

Care tips and warnings

The matte surface must be brought into proper shape with great care so as not to spoil its texture. In this case, several rules should be followed:

• Wash and clean any dirt only with soft material. A spatula, metal sponge or scraper will leave scratches.
• Use strictly permitted substances for washing in permissible concentrations. Gasoline, acetone (and solvents based on it), as well as compounds containing chlorine, will at best make the glass transparent.
• Choose liquid cleaners. Powder crystals will damage the spray.
• Do not leave the glass wet after cleaning. There will be streaks on it.

Thus, the matte surface will remain in good condition for a long time only with careful handling and proper care.

Products that are prohibited from use

Do not use gasoline to clean matte surfaces. Acetone should be used with caution: it works well for cleaning the acrylic version, but can ruin the silicate version. Cleaning with alcohol is not suitable for plexiglass covers.

It is prohibited to use chemicals with acidic components used to clear clogged sewer pipes. They will ruin the surface. In addition, silicone compounds can worsen the condition of a frosted window.

Întrebarea dvs.: Cum să curățați masa de sticlă mată?

o lingurita de produs la 3 linguri alb

oţet.
Turnați amestecul într-o sticlă cu pulverizator și adăugați 2 căni de apă caldă. 2) Scapă de divorțuri sticlă
suprafețele pot fi folosite cu alcool - îndepărtează eficient murdăria și face ca sticla să strălucească.

Cum să curățați sticla mată de la uși?

Va ajuta să se spele

murdărie pe mat
sticlă
cretă măcinată fin.
Luați aproximativ două până la trei linguri de pudră de cretă și faceți o pastă apoasă. Adăugați creta într-un pahar cu apă și agitați bine. Înmuiați o cârpă moale de bumbac în soluție și aplicați pe sticlă
.

Cum să curățați corect o masă de sticlă?

Dacă este necesar masă

Se poate
spălare
apă plată sau o soluție pentru spălarea sticlei și gresie și ștergeți cu o cârpă din microfibră. O dată la șase luni, puteți lustrui suprafața de sticlă cu o pastă moale, neabrazivă, folosind o bucată mică de cârpă de lână.

Cum să îngrijești o masă din sticlă mată?

Pe masă de sticlă

Nu trebuie plasate obiecte ascuțite.
Mesele cu mat
sticla trebuie curatata numai cu agenti speciali care sa nu creeze spuma. Blaturile mate sunt deosebit de sensibile la amprentele digitale. Pentru a elimina petele grase, trebuie să utilizați o soluție de amoniac și apă, amestecate în proporții egale.

Cum îmi curăț biroul?

Dacă bucătăria masă

lumina, poti
clean
pastă de dinți, sare sau gel lichid pentru vase.
Detergenții întunecați nu vor funcționa, deoarece pot lăsa urme. Alegeți produsul potrivit și începeți curățarea. Lasă-ți bucătăria masă
strălucește mereu cu puritate.

Cum se spală geamul sablat?

Cel mai bine este să folosiți un detergent special pentru sticlă (cum ar fi „Mister Muscle”). Dacă acestea lipsesc, puteți lua orice lichid de spălat care nu conține substanțe abrazive. De aceea, este mai bine să nu folosiți praf de spălat, deoarece este puțin probabil să o dizolvați complet în apă.

Cum să scapi de grăsimea de pe sticlă?

On afară de agenții de curățare disponibili în comerț, cei mai dificil de curățat grăsime

Poate fi îndepărtat cu un amestec de apă și bicarbonat de sodiu.
Sterge sticlă
cu un servetel inmuiat in apa fierbinte pentru a fi mai usor de indepartat
grăsime
, și aplicați amestecul pe acesta (300 g de bicarbonat de sodiu la 100 ml de apă).
Lăsați amestecul să acționeze sticlă
timp de cincisprezece minute.

Cum să curățați o masă mată?

Cum să curățați mătuit sticlă din grăsime — etape de lucru

1. amestec de cretă: se amestecă 200 ml apă și 3 linguri de cretă;
2. soluție de amoniac: se dizolvă o lingură de amoniac în 1 liter de apă;
3. amestec de otet: dilueaza o lingura de otet intr-un pahar cu apa;
4. un produs obișnuit de îngrijire a ferestrelor din pvc (deși este potrivit doar pentru îndepărtarea petelor proaspete).