Cleaning the toilet: rules for cleaning the bathroom in the house, what equipment is needed, how to wash, how to remove rusty stains in the toilet, clean black deposits at home?

A toilet room and toilet, shining with cleanliness, is the dream of every housewife.

This result can be achieved if you strictly follow the cleaning schedule and select the right equipment and means for washing and disinfection.

The advice of experienced housewives and professional cleaners will help with this. You will find all the most important things about cleaning the toilet in this article.

Rules for cleaning the bathroom in the house

Before you begin the fight against pathogenic microbes, plaque and unpleasant odors in the toilet, you need to audit your cleaning equipment and become familiar with the sequence of cleaning surfaces for an impeccable result.

Necessary equipment

To clean the problem area you will need:

rags, napkins, sponges, brushes for various surfaces;
toilet brush;
mop for cleaning the floor;
containers for cleaning solutions and clean water (basins, buckets);
detergents and disinfectants;
spray;
rubber gloves, respirator or mask.

clean the toilet in clothes specially designated for this.

After manipulation, equipment must be disinfected to prevent the spread of microorganisms: rinse thoroughly, treat with a special agent, and dry.

How to wash?

When cleaning the bathroom, you should follow a certain order so as not to do the same job twice.

Step by step steps:

Wear work clothes and protective equipment.
Take out the trash, remove rugs and anything unnecessary.
Clean and disinfect walls, doors, cabinets, mirrors, shelves, windows.
Remove water from the toilet.
Wash and treat its bowl, outer walls and components with a chlorine-containing solution.
Wash the floor and wipe it dry.

Housewives often use a protective apron made of oilcloth to clean the toilet to avoid getting germs and aggressive cleaning agents on their clothes.

Method 2 – When there is no time

The first thing you need to do is prepare and collect everything you need so that you have all the equipment at your fingertips. Take a bucket, brush, gloves, disinfectant, toilet cleaner, wipes, sponges and you may need an old toothbrush.
We wear disposable gloves.
The further sequence of actions is arbitrary. You can wash the outside of the toilet first and then the inside, or vice versa. But we will advise you to start with the inner bowl, because if water suddenly splashes out and gets on the already washed outer part, you will not have to wash it. Pour a little product into the bowl and use a brush to thoroughly wipe the area under the rim. Make special efforts to places where there is rust and plaque.
Now use disinfectant and paper towels to clean the toilet lid. Wipe it thoroughly from all sides. And in the places where the lid is attached, a toothbrush will help.
Fill a bucket with warm water and add cleaning product. Now let's start cleaning the outside of the toilet. Dip a sponge or cloth into the cleaning solution and thoroughly scrub the toilet, including the tank. When the water becomes dirty, change it and repeat the process until the toilet starts to shine.
OK it's all over Now. Congratulations, your toilet looks much better in just a short time. Blend it a couple of times so that all the dirt from the product is washed away. However, if the stains are too old, then it is best to carry out a perfect cleaning. Don't forget to wash your hands after cleaning the toilet.

Adviсe

The cleaning service is always happy to help you.

It is best to use paper towels to clean the outside of the toilet. Firstly, it is more hygienic than a reusable rag, and secondly, they do a better job of cleaning and are easy to flush down the same toilet.

Precautions

It is best to use a brush to clean only hard-to-reach areas.

Typically, the chemicals used to clean bathrooms are very aggressive. Therefore, keep it away from children and animals. And use rubber gloves yourself.

Selecting a Cleaning Product

Manufacturers of household chemicals for home cleaning offer a variety of concentrates, gels and liquids for toilet bowls.

To make the right choice, it is necessary to identify the main problem of contamination and pay attention to the composition of the product:

Surfactant – removes common stains;
acids - dissolve uric and limescale deposits;
alkali – fights rust and organic contaminants;
chlorine – bleaches, eliminates odors and fights microorganisms.

Fragrances in cleaning solutions are an optional component; they deodorize the problematic surface and mask the pungent odor of household chemicals.

Popular toilet cleaning products:

Bref Power Gel 6 in 1 . A universal concentrated product that fights rust, limescale and organic dirt, and disinfects surfaces.
Comet 7 days of cleanliness . Multifunctional spray effectively removes all types of plaque in the toilet and protects against microorganisms.
Dressing Duckling Super power visible effect . The gel in a container with a convenient spout penetrates into hard-to-reach places, copes with all known types of contaminants, and destroys pathogenic microbes.

Housewives note that universal products reduce cleaning time and allow you to save money. An overview of effective toilet cleaners is presented in this material.

How to clean a toilet with Coca-Cola?

The familiar Coca-Cola has unexpected properties to solve this problem.
To do this, purchase a 2-liter can of the drink and pour it into the toilet for four to six hours. After the time is up, close the lid tightly and drain the water several times, obtaining a clean, snow-white toilet, free of rust and limescale.

Professionals and housewives shared the most effective products they use to clean toilets:

Chemical products that contain special components that can destroy the dirtiest plaques - “Cillit Ban”, “Toilet duckling”, “Domestos”, “Comet”, “Sanita”, “Sanfor”, “Faberlic”
Cleaning and disinfecting products that are safe for the external environment - vinegar, baking soda powder, salt crystals, mustard powder, borax, liquid castile soap, diluted alcohol.

Surface cleaning

Cleaning the bathroom must be done in a certain sequence ; detergents should be selected depending on the material.

Walls

The side surfaces of the toilet are usually tiled. For effective cleaning at home, you can use folk recipes using budget components.

Step-by-step instruction:

Prepare a solution of water (1 liter) and table vinegar (200 ml).
Treat the tiles with the prepared liquid from a spray bottle.
Dilute crushed chalk in warm water to a paste consistency.
Apply to surface with a sponge.
Rinse off with a cloth dampened in clean water.
Wipe dry.

If you add 100 g of baking soda to the chalk slurry, you can restore the whiteness of the seams between the tiles.

Toilet and its components

You should not limit yourself to cleaning the plumbing bowl. It is necessary to wash the interior, exterior and components.

For perfect cleanliness, the toilet lid requires daily cleaning with a sponge using a soap solution. It is necessary to wash the tank and drain handle . A universal washing liquid is suitable for this; you can prepare a soda solution.

All parts must be thoroughly cleaned with a sponge, then wiped with a cloth soaked in water and dried. Lastly, disinfection is carried out.

To quickly clean the bowl, experienced housewives use a solution of hydrogen peroxide and ammonia in a ratio of 9:1.

Rugs

Before cleaning, they must be collected and shaken well to remove dust and debris.

The label with the manufacturer's recommendations will tell you whether to wash or clean the product . The final stage should be drying in the fresh air.

If the rugs are not dried well, mold may appear on them under the influence of moisture, which will be more difficult to get rid of than everyday dirt and microorganisms.

Floor

The last stage of general cleaning in the toilet room. The goal is to clean the surface of contaminants and disinfect it.

The first time it is necessary to treat it with a detergent, the second time you need to add a small amount of an industrial solution based on bleach (sodium hypochlorite) to the water or prepare a homemade mixture with bleach.

It is often advised to add ethyl alcohol to water, but the component is ineffective in this situation. A 9% vinegar solution will bring much more benefit .

Cleaning the floor should start from the baseboards, continue from the walls to the center and then to the exit.

How to clean plaque from plumbing fixtures at home?

To effectively rid the surface of the toilet bowl of contamination, it is necessary to find out its nature and, if possible, eliminate the causes.

How to remove rusty stains?

The reasons for the appearance are varied:

old pipes,
faulty tank,
water with a high concentration of iron impurities.

Regular detergent will not remove brown stains; a mild problem can be eliminated with baking soda and vinegar.

Algorithm of actions:

Apply a thick layer of baking soda to the bowl;
pour a 9% vinegar solution into a spray bottle;
spray onto the treated surface;
wait for the chemical reaction;
Rub the toilet bowl with a brush, paying special attention to damaged areas.

If the problem is old, you can use battery acid. It must be carefully applied to the surface with a sponge, and after 20 minutes, rinse thoroughly. When working with acids, safety precautions must be observed.

Lime deposits

A permanent resident of toilets, even among scrupulous housewives. Microscopic particles of minerals and hard water salts settle on the toilet bowl every day; if the surface is not treated daily, the problem becomes obvious and requires the use of household chemicals.

Domestos and Santry gels effectively eliminate the problem. Instructions:

Wear rubber gloves.
Remove moisture from the toilet bowl and side walls.
Apply the concentrate to the bowl.
Leave for a while for the active ingredients to do their job.
Clean the toilet with a brush.
Use the drain button several times.

Household chemicals can only be used for their intended purpose, strictly following the manufacturer’s recommendations.

To combat a slight layer of limescale, folk remedies are suitable:

baking soda,
lemon acid,
table vinegar.

This publication will tell you how to remove limescale deposits in the toilet.

How to eliminate blackness?

A type of fungus with a characteristic color settles on old plumbing surfaces , which over time become covered with microcracks and scratches.

If the surface is severely damaged, acid-based solutions and frequent treatment are necessary.

To prevent the formation of black deposits, you can use industrial tablets and cubes for the toilet tank.

Urine stone

Appears in the toilet if the owners neglect the flush button or it does not cover the entire surface. On the walls of old plumbing fixtures, yellow plaque appears faster due to the abundance of microdamages.

The most effective and inexpensive remedy to combat the problem is “Whiteness”. Mode of application:

Remove water from the toilet.
Pour a bottle (1 liter) of chlorine onto the walls.
Leave overnight.
Clean the bowl with a brush.
Rinse several times with clean water.

An alternative option is the use of industrial concentrates, for example, “Toilet duckling”.

Containers of household chemicals for cleaning toilets are equipped with a spout that can easily apply the product even under the rim; this is almost impossible to do without a special device.

This article will tell you how to remove urinary stones from the toilet.

Acid solutions of different concentrations

Folk remedies are suitable if the dirt has not accumulated for years. To remove thick plaque, the old technique uses strong acids.

Oxalic acid

Oxalic acid is considered a technical agent that is used in preparing surfaces before applying enamel. The powder is used dry or diluted with water. The prepared mixture cleans the toilet from both urinary stone and rust. The product is toxic, so you cannot work with it without a respirator and hand protection.

Phosphoric acid

A component of Coca-Cola, orthophosphoric acid, can be used in apartments with plastic pipes: its action will not disrupt the operation of the sewer system. But it will cope with rust removal successfully. Exposure time is 15-20 minutes. Operating procedure:

100g of the substance is placed in a tank;
100g is poured into the toilet;
After 15 minutes, treat the inner walls with a brush;
Wash off the solution;
Refill the reservoir and rinse.

Hydrochloric acid

Unlike the previous option, hydrochloric acid is not suitable for plastic pipes; the solution will damage the system.

200 g of the substance is placed in a container and the mixture is smeared inside with a brush. The toilet lid is closed after the procedure. The exposure period of the base is about 10-15 minutes. You need to rinse off the component well and ventilate the room.

Getting rid of condensation on pipes

The reason for its appearance is the difference between the temperature in the room and the water that enters the tank. The problem can also be caused by excessive humidity in the room, a faulty drain, or too frequent use.

Ways to fix the problem:

carry out repairs, insulate walls or replace the tank;
eliminate excess moisture in the room (checking and adjusting ventilation, installing a dehumidifier);
change the temperature of the water entering the drain (provide warm water, insulate pipes, install a boiler, adjust partial flush).

You can find out how to remove condensation from a toilet tank here, and from cold water pipes in the toilet - here.

Restroom cleaning schedule

In order for the problem area to shine clean and smell fragrant, as in advertising, it is necessary daily:

disinfect the toilet bowl and lid;
empty and clean the container for collecting used paper;
remove fresh contamination from surfaces;
carry out wet cleaning of the floor.

If you follow the recommendations, general cleaning of the room will be needed once a month and will take no more than an hour.

More information about the restroom cleaning schedule can be found here.

Mounted cleaners

Wall-mounted toilet bowl cleaners include special gels and tablets that are suspended in a special device at the point where water enters the drain part of the toilet. Mounted cleaners do an excellent job of removing limescale, disinfecting and adding a pleasant aroma to your toilet.

Do not forget to change plastic containers for gels at least once every two to three months. If you don’t want to wash them periodically, buy containers that are disposed of after the cleaning filler runs out.

Advice from professionals

Cleaning and disinfecting the toilet requires contact with aggressive components such as chlorine and acid. These substances cope well with the problem, but can harm the health of the owner.

You can avoid this if you follow simple rules:

Before cleaning, ensure the room is ventilated: turn on the hood, open doors and windows, if any. After the procedure, the toilet room also needs to be ventilated.
Empty the shelves, take out the excess: air fresheners, hygiene items, towels, soaps and gels.
Clean only wearing protective equipment, protect your hands with rubber gloves, and protect your upper respiratory tract with a mask or respirator.
Do not bend low over the toilet when cleaning, do not sniff detergents and disinfectants to avoid contact of aggressive substances with the skin, mucous membranes, eyes, and harmful vapors in the respiratory system.
Before use, carefully study the instructions on the product label, do not mix incompatible components, and do not exceed the recommended dose.

Rags, sponges, brushes that were used to clean the toilet should not be used under any circumstances to clean other rooms in order to avoid the spread of pathogenic bacteria.

Tools for work

To clean the toilet, you need the simplest tools:

brush;
wooden spatula or rubber spatula;
measuring cup with a thin spout;
hard, but not metal sponges, soft rags.

You will also need rubber gloves and sometimes a respirator.