How to clean a mink fur hat at home: cleaning a mink beret

Cleaning a white mink hat

Dust particles and dirt that fall on the headdress are clearly visible on the snow-white fur. In order to cope with dirt and yellowness on the white cap, you should use effective home methods.

Starch, talc and semolina

The products cope not only with dust and small marks, but also with greasy stains. Procedure:

sprinkle semolina, starch or talc on the fur and rub the product, simulating hand washing;
put the item aside for 2–3 hours, during this period the substances used will absorb dirt and dust;
remove any remaining product with a soft brush or a low-power vacuum cleaner;
comb the hat with a special fur comb.

Bran

You can clean a fur hat at home using both wheat and other types of bran. You should preheat the product in a saucepan or frying pan, stirring constantly.

It is necessary to pour heated bran onto the fur and lightly rub it into the fur. At the end of all manipulations, you need to comb the hat with a comb (preferably made of natural wood).

Hydrogen peroxide

The substance will help get rid of slight yellowness on the pile. Should be dissolved 1 tbsp. l. product in 1 tbsp. water, pour the resulting liquid into a spray bottle and treat the fur over the entire area. Then you need to dry the product naturally, without using a hair dryer or other devices. The product will be most effective when dried under the sun.

Can I use cologne?

Under no circumstances should a mink hat be cleaned with cologne, lotion or other alcohol-containing compounds, since after such cleaning, stains remain on the products, which are very difficult to remove. To remove stubborn stains, you can use alcohol - soak a cotton pad in it and lightly rub the stain, then dry it naturally.

Professional cleaning products

You can purchase special cleaning products for both a mink hat and a fur coat. The most effective are:

Ins. The composition fights dirt, protects against insects and moths. After processing, a thin invisible film is formed on the surface of the pile, repelling dust and small dirt. It has an antistatic effect, which prevents fur loss. Ultra-fine milk. A composition that will return silkiness, softness, and renew the mink hat. Professional fresh fur from SALAMANDER. Available in the form of a spray to restore the shade of the color of the headdress.

You may be interested in: How to get rid of yellow stains on clothes? Practical advice

You can wash your knitted hat using suitable household cleaners designed for wool or silk. But the work must be done carefully so that the material does not get wet to the ground - because of this, the product may shrink in size. When choosing professional products, you should carefully read the instructions and strictly follow them when applying so as not to damage the material.

Wet cleaning

You can remove dirt from a fur hat not only using the dry method, but also using wet cleaning. By following the rules of the procedure, you can return the product to its attractive appearance without harming the lint.

Do I need to soak?

The headdress should not be completely soaked or machine washed. There is no need to wet the fur (the base of the fur made from genuine leather). The product may become deformed and shrink in size. It will be impossible to restore the item to its original form.

Effective cleansers

Shampoo is the most common means for cleaning mink hats from dirt. Sequencing:

mix about 50 ml of shampoo without conditioners and other additives or detergent composition for wool and delicate fabrics with 2 liters of water until a large foam forms;
apply it with a cloth or foam sponge to the pile, carefully process it from the base to the side elements of the product (the foam should cover the fur part completely);
after the foam absorbs dirt, it is necessary to remove its remains with a clean, dry cloth;
The product should be dried away from heating appliances and other heat sources.

You can also get rid of contaminants using ordinary table salt. Should be dissolved 1 tbsp. l. product in 1 tbsp. water, pour in a few tablespoons of alcohol. Then you need to moisten a soft brush or sponge in the composition and treat the contaminated areas. Drying should be done naturally.

You can remove stains from fur with table vinegar. After moistening a cotton pad in it, you need to go over the entire product and remove the dirt. At the end of the procedure, it is recommended to cover the pile with a glycerin solution to add softness and shine.

We recommend:

How to remove a sticker from clothes

If greasy stains have formed on the cap, you should use aviation gasoline and starch. Both components should be mixed until a paste is formed, then rub it into the greasy areas of the pile. After waiting some time until the gasoline evaporates, you need to carefully knock out the cap to remove starch particles.

Important! To carry out the procedure, you need to use only purified gasoline. Otherwise, the fur will become covered with streaks.

Removing stains from mink fur

The worst thing is when various household stains appear on a white fur product. The fur can be dirty due to carelessness with fatty foods or cosmetics. However, don’t get too upset and run to the dry cleaner. You can remove stains at home using cheap improvised means.

You can deal with many stains on light furs by wiping them with a washcloth and a solution prepared from 400 ml of warm water, a couple of tablespoons of salt and 1 teaspoon of 3% ammonia. After finishing cleaning, the products are additionally wiped with a clean, damp cotton cloth. This is necessary to completely remove any remaining ammonia solution.
Fresh greasy stains should be generously sprinkled with any available absorbent: starch, talcum powder or baby powder. After some time, the powder is shaken off, and the pile is additionally wiped with a sponge dipped in a foamy soap solution. If it is not possible to completely remove the greasy trace, then it is treated with purified gasoline.
Highly purified gasoline is mixed with starch to a thick consistency. This composition is used to treat greasy stains. When the mixture is completely dry, it is brushed off.
You can clean a mink from stains by wiping them with cotton pads and a product made from 200 ml of water, 50 ml of alcohol and 30 g of salt. Having finished cleaning, pass over the pile with a damp rag or napkins and additionally treat it with glycerin (a couple of drops are needed) for shine.

Elimination of unpleasant odors

Over time, after wearing the item regularly, the lining of the hat may acquire an unpleasant odor. In this case, it is enough to wash it, first remove it from the product, or completely replace it.

Important! The lining should be washed only in warm water, never in hot water. Otherwise, it will shrink, and it will be possible to restore the product only after completely replacing this part.

You can use the following tool:

dissolve 1 tsp. ammonia or salt in 0.5 liters of water;
moisten a soft cloth or sponge in the liquid and lightly rub the dirty areas;
At the end of the procedure, blot the fur with a clean, dry cloth and dry the hat in a well-ventilated area or in the fresh air.

Removing dirt and yellowness from white fur items

Cleaning a white mink hat at home can be more difficult due to limited approved ingredients. In addition, long-term storage can lead to yellowing of the fur, and the wrong choice of cleaning products can change the color and leave permanent stains. There are several effective and safe cleaning methods for light-colored hats:

Using peroxide. Water and the main component are added to the container in equal proportions, then the headdress is treated with the composition and dried in the sun. This method will not only get rid of dirt, but also make the fur shiny.
Chalk, talc and starch. These substances will return the products to their whiteness and softness. Simply sprinkle the cap with the chosen product, leave for an hour, then shake to remove grains of the substance.
Combined option for cleansing old dirt. To do this, first sprinkle the fur hat with chalk (you can replace it with talcum powder), then clean the product with shampoo foam, massaging the pile. After 1-2 hours you need to remove the residue with a brush.
Vinegar. Moisten a clean cloth with the composition, treat the dirt, comb out the residue with a brush, and apply a little glycerin to the pile.
Semolina. Take 2 kg of cereal, pour it into a bowl, place the hat in the container and “wash” it with careful movements. After cleansing, simply shake off the semolina and brush it off.
Solutions using peroxide and ammonia. The solution is poured into a bottle with a spray, the hat is treated, evenly distributing the composition over the fur. The hat is left in the sun, after which the material is treated with vinegar to restore shine and softness.

When choosing absorbent products for cleaning (semolina, starch), you should remove them as thoroughly as possible after processing. When wet or exposed to moisture, they will become “bait” for moths.

Storage rules

Improper storage is one of the main reasons for the appearance of dirt on the cap. Helpful Tips:

store the item wrapped in cotton cloth along with moth repellent;
periodically check the condition of the headgear during storage;
do not allow a damp environment in the closet or chest of drawers where the hat is located, ventilate the furniture frequently;
Avoid exposing the stored product to the sun.

You can clean a mink hat at home using either dry or wet cleaning. Getting rid of local contaminants and unpleasant odors is also not difficult if you follow all the cleaning recommendations and properly prepare for the procedure.

4/5 — (4 votes)

How to clean a mink hat yourself at home

Many fashionistas believe that if a mink hat gets dirty, it is better to take it to the dry cleaner. They are partly right, since dry cleaning specialists have certainly done this more than once and know all the subtleties and nuances. But there are also disadvantages to such cleaning, since chemicals are used . Their frequent use can completely ruin an expensive item. It will lose its appearance or completely deteriorate.

The other half of the owners of mink hats argue that it is not worth spending your money and treating the hats with chemicals. You can clean a mink hat yourself at home, using products that are definitely available in every home, or you can buy them at the nearest store for pennies. Find out how to do it correctly from this video:

How to effectively clean and bleach a fur coat using pharmaceutical products

If the fur coat has turned yellow, use a salt solution. To prepare it, you need to dissolve 10 g of salt and a teaspoon of ammonia in 250 ml of water. After processing the fur product, leave it to dry at room temperature.

Bleaching yellowed mink fur is easy and cheap using regular pharmacy hydrogen peroxide. The product is combined with water in a one to one ratio. The solution is distributed with a spray bottle over the entire surface of the product and remains until completely dry under normal room conditions. Then you need to carefully comb the snow-white fur with a special soft brush.

Try not to wet the flesh, otherwise after drying it will become hard, rough and cracked, and the clothes will become deformed. In case of pronounced yellowness, the same solution will save the fur coat, but with the addition of 3-5 drops of ammonia. The perfect way is to soak a large piece of cotton wool in this liquid and put it on a plastic comb with a wide comb and non-sharp teeth. The product is cleaned by combing the pile in the direction of hair growth.

If during cleaning and bleaching procedures the mink loses its shine, it can be restored by wiping the surface with a glycerin solution. 2-3 drops are enough, which are rubbed between the palms and carefully passed over the surface with your hands. Or combine one part of water and glycerin and apply it to the item with a sponge.

What causes yellowness in a light fur coat?

If storage conditions are not met, worn carelessly or under the influence of unfavorable external factors, the product may lose its whiteness, shine and radiance, and acquire a dusty yellow tint. Unfortunately, you can't always cope with it, but it's worth a try. First you need to determine why the fur coat turned yellow.

Common causes of yellowness:

low-quality or fake fur;
long frequent trips in the car, heated seats;
using a seat belt, wearing accessories;
exposure to direct sunlight and ultraviolet rays;
improper storage;
excess humidity;
stains and dirt;
traces of hands and sweat;
contact with cosmetic and perfumery products;
product service life is too long.

Whitening fur coats with special store-bought products

Fur clothing can be cleaned no more than once a season so that it does not lose its original appearance. There are drugs that can quickly restore the whiteness of your favorite item. Remember that you can use them only after cleaning your outer clothing from dirt.

Magic Snow liquid, manufactured in Germany, is designed to remove yellowness from white mink fur. The product is diluted with warm water in a ratio of 1:4, poured into a spray bottle and shaken. Then spray on the yellowed areas of the pile. The fur coat is hung out to dry, periodically smoothing and combing. An alternative to dry cleaning is Biofur thick soap. It eliminates yellowness and restores shine, allowing you to restore the whiteness of fur within half an hour.

If all else fails, try tinting your fur coat. Spray aerosol Furasol will serve to return the snow-white color. It is easy to apply and dries within a day. Excess paint is removed from the pile with a dry cloth. When using chemicals, test them first on a small, inconspicuous area of clothing.

Don't be upset if you can't return your favorite item to its snowy whiteness. Contact a specialist bio-dry cleaner or fur atelier. They have in their arsenal many modern non-aggressive products for cleaning and bleaching natural furs. At your request, they will tint or dye the fur in a different shade - and your wardrobe will sparkle with new colors.

How to clean a hat without washing?

Hats made from other types of fur should be cleaned with slightly different mixtures. Dark-colored furs can be cleaned well with a slightly damp mustard powder. Products made from white furs are best treated with a mixture of starch and ammonia.

The following solution is suitable for cleaning any types of furs:

1 liter of cold water;
50 ml of pure alcohol;
20-30 ml lemon juice;
measuring cup of wool conditioner.

The ingredients are added to the water and mixed well. Next, take a slightly damp brush or cotton swab. To clean fur, wipe the pile in different directions. It is advisable that at the end of cleaning the fur is combed with a brush in the direction of natural growth.

For drying, you can use the already familiar method - paper or a towel according to the shape of the product. Can be put on a large jar. Drying with electrical appliances is not permitted.

Washing and drying methods

The washing method directly depends on the type of material of the product. Quality items have special labels that tell you in detail how to wash and dry this item of clothing:

gentle washing (water temperature at the required degrees, without strong mechanical treatment, slow centrifuge speed during spinning);
delicate (lots of water, quick rinse, minimum mechanical processing);
hand wash only (no spin);
washing with water of a certain temperature (30, 40, 50 degrees or more).

You also need to dry things according to certain rules, which are indicated on the same labels. There are several types of drying things.

wringing and drying in a washing machine;
dry at the specified temperature (low, medium or high);
gentle spinning and drying;
delicate squeezing and drying;
vertical drying;
on a horizontal surface;
no spin;
drying the product in the shade.

How to clean the lining

You can clean it in one of the following ways:

If the dirt is barely noticeable, you can wipe the pile with a damp cloth.
Stubborn stains are removed with a cotton pad soaked in alcohol.

If the lining can be cleaned, the hat is turned inside out, put on the jar and dried. If these products fail to remove the stains, the lining is peeled off and washed separately. The dried lining is sewn into place.

Washing a fur hat at home is quite simple. By following the recommendations given, you can clean your headdress from dust and other contaminants without damaging the structure of its base.

Headdress with fur pompom

Popular knitted hats with fur pom-poms also require care, but since you cannot wash a hat with a fur pom-pom, you need to detach the pom-pom and clean it separately. In high-quality copies, a function for removing the pompom from the product is provided for this purpose. Fastening with special ribbons will help solve the issue of washing; if the pompom is firmly sewn, you can cut it and make the fastening yourself by sewing a ribbon to it and securing it.

We suggest you familiarize yourself with: The spin cycle in the Atlant washing machine does not work.

A pompom made from arctic fox fur is cleaned using a solution: 500 ml of water, 1 tsp. ammonia and 3 tsp. salt. The fur is thoroughly blotted and combed during the drying process.

The rabbit pom-pom is sprayed with hydrogen peroxide or moistened with vinegar (this will remove yellowness) and combed out thoroughly.