How to iron a pleated skirt and pleated skirt: made of polyester, silk, chiffon, iron and steamer

0 /5

15.11.2021

280

Often girls have a question about how to iron a pleated skirt in order not only to preserve its original appearance, but also to get rid of unwanted dents and folds. Let's look at the features and methods of ironing pleated skirts in more detail in the article.

Preparing for ironing

Before ironing a pleated skirt, you need to pay attention to washing it properly, since if you make some mistakes, it can be almost impossible to iron the product completely.

When washing and drying your skirt, consider the following recommendations:

It is recommended to wash the product by hand or in a machine using a delicate cycle.

When washing a skirt in a machine, first place it in a special fabric bag so that it does not wrinkle too much. The drum should not be filled completely.

Instead of regular powders, use gentle liquid washing gels. Additionally, use conditioner to soften the material.

Squeezing and twisting of the product is unacceptable.

The water temperature should not exceed 30°C.

Dry the item naturally, horizontally and straightened, to avoid the formation of unwanted creases.

If the pleated skirt was made of dense materials, after proper washing and drying, it may not need to be ironed.

Iron

Ironing can cause a lot of trouble and damage the product. After purchasing such a skirt, you need to familiarize yourself with the rules on how to use this electrical appliance in order to bring the item into proper shape.

The risk of ruining clothes is very high, so it is recommended to strictly adhere to the correct algorithm of actions.

How to iron a leather skirt:

First you need to turn the item inside out and straighten it on the ironing board.
Thick material is placed under clothing. You can use parchment or wrapping paper, but the former is better. Gauze is not recommended.
Iron steam and high temperature should not be used to smooth the skirt. The minimum temperature must be set.
Ironing should be done carefully. The skin is very sensitive, the iron should not be kept on one area for a long time. You can’t stop, he must always be in motion. Also, do not put pressure on it when ironing.
Areas not covered with fabric or paper cannot be treated.

After ironing, the skirt is laid out to cool so that there are no creases or folds.

You can carry out the procedure from the front side, but very carefully. Just use a very thick fabric and remember that you cannot touch the surface of the leather with an iron without material, this will lead to damage to the product.

How to iron a pleated skirt?

If, after washing in compliance with all the recommendations, bruises, creases, and unwanted folds still appear on the corrugated fabric, you can resort to ironing it. This can be done in two ways - with an iron or a steamer.

Let's take a closer look at each method.

Iron

More often than not, when asked how to iron a pleated skirt, girls choose an iron, despite the fact that its careless use can completely ruin the product.
When using the iron, observe the following rules:

If this is not the first time you have washed your skirt and you know that after it is completely dry you will still have to iron it, leave it in a slightly damp state. This will make it easier to iron out bruises.
Ironing is done from the reverse side, the lining and the inner parts of the pockets are ironed separately and first.
To avoid damage to the material, you can place a thin cotton cloth or gauze on it before ironing it.
The heating temperature of the iron should not exceed 120-130°C (1-2 points). Choose the temperature regime based on the composition and origin of the fabric being processed.
To remove severe creases from dried fabric, use damp gauze. If desired, use the steam function on the iron.

Before you start ironing your skirt, simply straighten all its folds the way they should lie in a relaxed state. This way you can simply remove all the bruises and maintain the appearance of the item.

Steamer

You can iron a pleated skirt after washing more efficiently and quickly using a steamer.
In addition, this way you will not have a chance to spoil the original appearance of the item. You just need to hang the skirt on hangers and start steaming after the device has fully heated up. It is recommended to first process the lining and pockets from the inside, and then the front. Do not bring the device close to the fabric and keep it at a distance of 15-20 cm from its surface.

If you wish, you can steam the front part from the back to immediately control the quality of the work performed and avoid the occurrence of unwanted marks.

With a steamer you will get rid of even severe creases and dents on a dry skirt and preserve its appearance.

What is not recommended to do when ironing pleated chiffon items?

To make a pleated item look beautiful, you need to remember which methods are unacceptable when ironing a chiffon product:

When rinsing pleated clothes, do not use strong efforts;
do not use the spin cycle;
You can use steam only in certain cases, taking into account the composition and quality of the fabric;
Before you start ironing the pleated fabric, carefully read the tag on the clothing;
moisten a dry item with a damp cloth;
a pleated outfit can be gently ironed, but do not rub it with an iron;
Do not dry chiffon material on radiators or under the rays of the hot sun.

Wearing a pleated design with perfectly ironed folds, you will always look stylish, fashionable and simply at your best. By taking proper care of your belongings, they can last much longer!

Tips and prohibitions

To iron a pleated skirt and quickly return it to its original condition after washing, it is recommended to follow a number of tips:

When machine washing, turn on the minimum speed. Avoid squeezing or twisting the product.
Pleated clothes should be dried naturally on hangers.
Before ironing the skirt, prepare the surface for it - it should be smooth and clean. Also make sure that the surface of the iron is clean - there should be no soot or scale on it.
First, the lining layer of the skirt is ironed, then its belt, and only then can you begin to process the folds.
Wash your skirt in a special fabric laundry bag. This way it will wrinkle less, due to which you will quickly return it to its original state.
It is recommended to store pleated items on hangers (possibly with clothespins). When folded, they will wrinkle more, which is why it will be possible to return them to their previous appearance only after repeated washing.

However, there are several prohibitions regarding the care and ironing of pleated items:

When ironing a product with an iron, do not splash water on the fabric, otherwise marks and stains will remain on it.
Don't let the skirt dry out. A slightly damp pleated skirt is much easier and more efficient to iron.
Handle the skirt carefully when ironing it. Do not press it too hard on the surface of the item or pull it out. The surface of the iron should barely touch the fabric.

Method for restoring folds

Some manufacturers treat pleated skirts with a special solution to prevent folds from straightening out.

Sometimes, for a number of reasons, a thing loses its shape and the folds straighten out. At home, you can independently prepare a product that will return the product to its original appearance and restore folds.

Procedure:

— Make a saturated soap solution using a liter of water and grated laundry soap;
— Add the white of one egg, a teaspoon of starch, and one tablespoon of vinegar to the prepared solution;
- Stir everything thoroughly, take gauze and soak it in the solution;
— Apply gauze to the fabric through a sheet of paper.

The skirt can be worn again after ironing.

Important: you can create folds of any size, the main thing is to perform the procedure carefully and maintain proportions.

If difficulties arise during the washing and ironing process, it is better to use the services of professional dry cleaning.

With the right approach, ironing a pleated skirt is not difficult, and the process will not take much time. Using competent recommendations, advice and patience, you can maintain the original appearance of your favorite skirt for a long time.

Answers to frequently asked questions

How to wash a pleated skirt if there is no special bag for machine washing?

Use a regular nylon stocking. Just place the product and send it to the wash in this condition. The item will wrinkle less, and it will be easier for you to smooth it out.

Is it possible to wash a pleated skirt by hand?

Of course, for pleated items, gentle hand washing with the addition of conditioner is more suitable. When choosing to machine wash, be sure to turn on the delicate cycle.

How to iron a skirt if it is dry and has strong folds and creases?

Try using a steamer or ironing the material through a layer of damp gauze. If this treatment does not help, wash the item again and begin ironing it while still wet.

Do I need to stitch the pleating with a thin thread before ironing?

No, despite the fact that many often resort to this method, it is not at all necessary. Just before ironing the product, carefully fold the folds so as not to form unnecessary wrinkles and creases.

Care

Leather items need to be looked after to keep them in good condition for a long time. New and well-maintained clothes look very beautiful.

Basic Rules:

After purchasing, sprinkle the product with ground coffee to remove the specific smell.
Wipe the leather skirt with a damp cloth or run a vacuum cleaner over it to remove dust. Only after this can the item be treated with impregnation.
Do not clean your skin frequently. It has a thin protective layer.
Before using any leather or leatherette care products, you should first test them on the underside of the garment.
If greasy stains appear that do not disappear on their own, take chalk and sprinkle it on the stain overnight. In the morning, shake off any remaining product and treat the item with impregnation. Wear it with confidence.
If the skirt is light in color, and a stain appears on it and the special product has run out, treat the contaminated area with a cotton swab dipped in cow's milk. It is also recommended to use an onion.
Leather items should be dried away from heating appliances. If you dry near an electric heater or radiator, the clothes may become deformed.
Lemon juice will help remove ink and pen marks on a light leather skirt.
If the leather has become stale and white spots or mold have appeared on it, furniture cleaner and table vinegar will help.
Do not use acetone or other solvents for cleaning.
Tarnished areas are wiped with fresh orange peel.

Leather is a natural product and requires appropriate care. Skirts made of such material should be protected from heavy contamination and mechanical damage.

If you can sew up an ordinary fabric skirt yourself, then you will have to either throw it away or give it to specialists who know how to hide defects.

Homemade methods will help you easily cope with the task. If you are afraid to act on your own, use dry cleaning services. Experienced specialists will quickly return the skirt to its original appearance.

What to remember

Treat with steam. Thin and delicate items (chiffon, nylon, crepe de Chine and silk) are smoothed well by the steam generator.
Secure folds with wide stitches. Before washing or ironing, to make it easier to care for a pleated item, sweep the folds with wide stitches and iron them.
Take it to the dry cleaner. Items made from natural fabrics must be dry cleaned for processing.
Iron from the inside out. Iron leather, faux leather, knitwear and wool from the reverse side so that no shiny iron marks remain.

Ironing sequence

Before ironing, the skirt is turned inside out and placed on the narrow end of the ironing board or carefully laid out on another work surface. The most convenient ironing sequence would be:

Iron the lining and the inside of the pockets (if any).
Smooth out the back of the waistband and the hem of the hem. If the belt is assembled with an elastic band, it is stretched and then ironed without applying much effort.
Turn the skirt right side out (if it will be ironed right side out). If necessary, first treat shiny areas - without touching the fabric with an iron, apply a strong stream of steam from a steamer or a wet napkin to it, then brush it over the damp fabric to restore the pile.
After this, the main ironing stage begins. First, iron the waistband and top part, aligning the fastener, then the bottom line (preferably through a napkin), then the side seams, back and front.

The ironed skirt should be allowed to hang on its hangers. It is stored in the same form in the closet.