How to remove glue from tape on a metal surface

In everyday household activities, people often use adhesive tape. It is simply irreplaceable when carrying out repair work, when it is necessary to connect parts or reliably protect the base from external influences. In addition, using the popular tape is extremely convenient and easy. But at the same time, it is worth remembering a small feature of using such material: sticky marks subsequently remain at the place where it is glued. Getting rid of them is not always easy. Therefore, users often have a question: how to remove glue from tape? This problem is solved in different ways, it all depends on the nature of the base that requires cleaning, as well as other factors.

Adhesive tape (scotch tape) is a narrow film coated with glue, which is produced in the form of narrow rolls of various thicknesses Source optitraderus.ru

Types of adhesive tapes

Depending on the adhesive base, as well as the method of application, all adhesive tapes are divided into several types:

Painting (paper). Rubber glue is thinly applied to the base.
Packaging. A transparent adhesive composition is used in its production.
Building. It can be two-sided or one-sided. The adhesive contains acrylic substances.
On a foam base (double-sided mounting). Produced in various colors, gluing is performed with compounds containing rubber or acrylic.

Advice! When using a specific type of tape, you should take into account: it is always easier to remove adhesive residues of rubber-based products from any surface.

Why does any tape leave marks?

After removing the adhesive tape, there is always glue left on the surface, but the amount may vary. It all depends on compliance with the technology for removing adhesive material. Before using such a product, you need to find out how you can remove the adhesive from tape from different types of bases. Additionally, you should consider:

what cleanser is available and how effective it is;
the structure of the contaminated surface (porous materials are more difficult to clean);
duration of contact.

It is worth starting the cleansing procedure early. If the sticky residues have time to dry, then later they will first have to be brought to a sticky state, and then dissolved.

How to remove marks from masking tape

Fresh glue from paper tape can be easily removed from any base using the following means:

Alkaline compounds. Ordinary laundry soap also contains alkali, but in small quantities. Therefore, it is considered less effective than highly alkaline agents (for example, caustic soda). The soap composition is generously applied to the contaminated base, left for about ten minutes, then removed with a dry cloth.
Alcohol. Both methyl and ethyl, as well as any alcohol-containing solutions, are perfect. You just need to soak a cotton pad in the liquid, then thoroughly treat the surface.

Important! Some materials do not tolerate contact with alcohol mixtures. For example, plastic subsequently comes into contact with the latter and loses its attractive gloss.

With repeated application, laundry soap can completely remove traces of tape from the surface Source soap-teco.com

How to remove masking tape correctly

If the paper tape has not had time to dry, then removing it is not difficult at all. To do this, you need to pry it up by one of the edges and gently pull it in the opposite direction. Moreover, all movements must be smooth. Remains of the adhesive composition can be easily removed with oily vegetable oil.

When the tape has been on the base for a long period of time, it will have to be soaked with water in advance. It is recommended to use a sponge and thoroughly wipe the surface. After a while, the glue will absorb moisture, and the paper will get wet, so it will be easier to remove it. The resulting residues are quickly removed with any degreaser.

Advice! If after removing the masking tape there are very few marks left, it is recommended to use a soft eraser to remove them.

If the masking tape was applied to the base recently and has not yet had time to dry, then removing it will not cause any difficulties Source kraski-net.ru

How to remove glue after removing tape

There are many different methods, a huge number of preparations that allow you to efficiently remove traces of adhesive tape from all types of surfaces. It is permissible to use both special formulations sold in stores and folk remedies. Moreover, they should be selected depending on the type of base.

From linoleum

If you need to remove adhesive traces from linoleum, you can use household cleaners. These could be: “Sanox”, “Pemolux”, “Pemosol”, etc. The same means can be used if adhesive stains from adhesive tape have formed on other types of flooring (parquet, solid boards, cork, etc.).

If you have laminate flooring in your house, then you need to be as careful as possible with it, because the surface of this flooring is laminated, presented in the form of hardened resin. It is sensitive to mechanical stress, so you should not use cleaning products containing abrasive substances when cleaning laminate flooring.

The best option in the case of laminate is to use alcohol solvents and soap solution. It is also not recommended to over-wet the surface of the laminate, as... the material does not withstand moisture well. If the laminate has been heavily wetted, then you need to remove all moisture from it as quickly as possible.

Important! If cleaning products containing abrasive substances are chosen for cleaning linoleum, then the work must be carried out as carefully as possible so that abrasions do not form on the floor covering.

Video description

How to clean windows from tape - how to remove sticky glue from plastic windows

Removing adhesive from glass

You can clean the glass surface from glue using the following proven methods:

Place a new one on the old tape. Then heat the iron slightly and run it over the stripes. As a result, you need to pick up the edge of the tape with a sharp object and remove the two strips together.
White spirit, gasoline, and other petroleum products are excellent solvents.

Typically, rubber glue (even if it is dried) is intensively affected by the solvent. Removing the acrylic composition is much more difficult, since a separate preparation must be selected for each adhesive tape.

The easiest way to wipe off the adhesive from tape from glass is with household solvents: they remove both fresh and old traces Source kraski-net.ru

Cleaning glass surfaces

Glass

- This is a fairly stable material that allows it to be processed using chemicals and any other cleaning agents. Scotch tape can be easily removed from glass surfaces with vegetable oil, vinegar, alcohol, acetone or white spirit.

Cleaning glass using white spirit

You can also easily clean the glass from double-sided tape, which has been “tightly” drying to the surface for a long time. To do this, you need to soak the adhesive layer by applying rag or cotton swabs, previously moistened with acetone or alcohol. After you hold the sponge for a few minutes, the glue is simply removed by simply wiping it with a napkin. You can also use the same hair dryer to soften the glue.

Video description

Easily remove the tape from the glass.

How to remove adhesive from tape from metal

To effectively remove dirt from a metal surface, it is advisable to use:

Freezing method. Place some ice in a plastic bag, which is then applied to the contaminated base. After 20 minutes, all dirt can be easily removed with a hard plastic brush or wiped off with a rough cloth.
Special chemicals.
Windscreen wipers. After applying them, the base is immediately wiped with a dry cloth.
Any alcohol-containing liquids. A rag is soaked in one of these solutions, then the surface is thoroughly wiped until unwanted marks are completely removed. The resulting divorces are disposed of in the same way.

To remove adhesive from adhesive tape from metal coatings, it is unacceptable to use abrasive special tools or mechanical methods. After contact with an abrasive, microcracks often form on the metal and it loses its shine.

Which is better - dry or wet method?

The dry cleaning method helps to get rid of fresh stickers, and the wet cleaning method helps to get rid of already ingrained ones.

The first option involves simply peeling the sticker off the surface. After the sticker, there may be an adhesive stain left on the refrigerator. To get rid of the mark, try using the “wedge by wedge” principle:

Take some tape and stick it to the dirty area.
Then tear it off sharply.
If the glue is not completely removed the first time, repeat the procedure again until the stain is completely removed.

The wet method involves the use of available liquid products or chemical cleaning compounds, for example, if it is not possible to remove the sticker after using the dry method.

Industrial tape adhesive removers

Today, the most popular and effective preparations intended for removing adhesive tape include:

Taygeta S. The high efficiency of the composition allows you to wash off the stain within 15 seconds after application.
Meridia Impet. Gets rid of even stubborn stains, including adhesive stains.
Kiehl Tablefi. Produced in a can with a built-in dispenser.
Sticker Remover. Available in the form of an aerosol, pencil, liquid. This product allows you to wash the adhesive from any sticky tape.

HG Sticker Remover is designed to completely remove stickers, adhesive residues, tape marks, oil and tar stains from all types of surfaces Source brewers.co.uk

How to restore shine to your refrigerator

After you have washed the refrigerator from possible glue residues and stains, you need to restore the appearance of the surface. Ordinary tooth powder will help restore the enamel to its former shine.

Instructions for use:

Add ammonia to the powder in a ratio of 2:1.
Apply a little solution to a piece of newspaper and wipe the cleaned area.
If the refrigerator is covered with stainless enamel, you can use paper towels or napkins.

To give a glossy shine to a stainless steel coating, the following are also suitable:

Sunflower oil. After cleaning, dry the surface thoroughly to prevent dust from sticking to the refrigerator.
A solution based on white vinegar in a ratio of 1:3. Apply a little product to the desired area and rub with a paper towel. After the procedure, it is recommended to ventilate the kitchen.

Stainless steel surfaces should be washed and polished strictly in the direction of the grain.

Video description

How to remove traces of tape.

Caustic soda

Before you start cleaning the surface, you need to prepare a saturated caustic solution. Then, using a sponge, apply it to the contaminated areas, and after a minute, remove it with a dry cloth.

In order to clean the surface from traces of adhesive tape using caustic soda, you need to prepare a concentrated solution of it Source hoznauka.ru

Toothpaste

Suitable for all types of wooden furniture, except polished. The paste-like composition must be diluted in a small amount of water, then applied to the surface with a cotton pad. After 5 minutes, the treated area should be rinsed with warm water and wiped dry with a cloth.

What products are not advisable to use?

When removing tape marks, you need to remember that not all chemicals are suitable for certain substrates. It is important to consider:

Abrasive materials and powders leave scratches on the treated surface.
Solvent 646 and acetone, on the contrary, help increase the stain area.
You cannot use any abrasives on plastic: they can damage the smooth base.
Turpentine leaves stains on plastic surfaces that cannot be removed.
Mirror metal bases should not be cleaned with abrasives to prevent scratches.

Attention! Incorrect selection of agents will not eliminate pollution, but will only damage property.

General tips and tricks

To avoid damaging the skin of your hands with aggressive substances, you need to wear gloves.
When interacting with liquids that have a strong chemical odor, it is recommended to protect your respiratory system with a respirator.
If you don’t have a hairdryer at hand to heat the surface, you can expose it to the sun’s rays. They will melt the glue, making it easier to remove.
You should not start treating a large surface with aggressive agents if you are not sure of the success of the event. In order not to spoil the thing, you need to try to test the selected product on an inconspicuous area. Only after this can you begin further cleaning.