Customer service, Packaging and used device
Page 32
- Image
- Text
Customer Service
E number and EO number
If your device needs repair, our Customer Service is always at your service.
Address and telephone number of the nearest workshop
You will find it in the telephone directory. IN
service centers specified in this
Management will also give you the address
the nearest workshop.
When calling Customer Service, always indicate the product number (E-number) and
serial number (EO number) of the device. The nameplate with numbers is located on the right, on the side of the oven door. So as not to search for a long time
numbers in case of malfunction, enter the device data right now.
Number E
EO number
Customer service ®
Packaging and used device
During transport of your new device
protected by packaging. All packaging elements are environmentally friendly and can be reused.
Help protect the environment by throwing away packaging.
In turn, used devices are not at all
are useless waste. If properly disposed of, they can serve as valuable raw materials.
for processing.
Before disposing of a used device,
make it so that it can no longer be
use or mark it with a sticker “Attention, scrap metal!”
You can get information about the opportunity
recycling at your dealer or local
administration.
32
HOW TO REPLACE A LIGHT IN AN OVEN OVEN
HOW TO REPLACE A LIGHT IN AN OVEN OVEN
Replacing an oven light bulb is not without difficulty.
In the process, the most important thing is not to touch the fragile cap. The instructions for replacing the lamp must be followed carefully. This approach will ensure long-term operation of the device. Lamp replacement process
Lamps in gas and electric stoves are changed in a similar way to each other. However, the replacement process in different models may be carried out differently. First you need to turn off the oven itself. Allow it to cool, especially after cooking. The warmer the oven itself, the more difficult it is to unscrew the lamp and cap. The last element must be unscrewed before the lamp itself. The faulty lighting device also needs to be removed. Check the owner's manual for your oven to determine which appliance is compatible with your oven. Only after familiarization can you buy a new lighting lamp. Then install it together with the cap. Check the lamp's functionality. There are times when a suitable lamp is not available for certain ovens. In this case, try to avoid damaging the lighting fixture and be more careful with the equipment.
Electrolux
Ovens of the brand in question interact differently with lighting lamps. Electrolux stoves have removable glass. And it is attached with a latch. To remove it, light pressure with a screwdriver is necessary. The disconnection will occur and the part can be pulled out. Then unscrew the old lamp and connect the new one.
Bosch
You can replace the lamp in two ways: 1. Replacement method, as in Electrolux ovens; 2. By partially disassembling the oven; In case of disassembling the oven, you must contact the service center.
Hansa
Replacing the lamp in ovens of this brand occurs according to the standard process: 1. Unscrewing the cap; 2. Removing the cap; 3. Unscrewing the lamp; The cap in Hansa ovens has ridges. By holding them you need to unscrew the device. If you lack strength, press the rag against the cap. After turning, the cap is removed in a forward motion.
The most suitable lamp for most ovens
Most often, devices with an E14 base are used. This type of base is available for halogen and incandescent lamps. The manual for the oven of a particular model must specify which base is most suitable. There are cases when the slab interacts only with a smooth base. Lamps with powers of 25W and 40W are usually used. The main differences between them are power consumption and backlight power. They also differ from each other in service life: 1. 40W - 2-5 years; 2. 25W - eternity; Typically, for simple cooking in the kitchen, 25W lamps are chosen. For baking or other similar processes that require long-term baking, you need to buy 40W lighting. Backlight lamps must withstand heating up to 300°C and above. The packaging of the lighting product indicates the set temperature. This also applies to halogen lamps.
You need to be careful with halogen lamps because of the mercury inside. If a light fixture breaks, immediately pick up the pieces. Otherwise, mercury may end up on the food being prepared. It is more convenient to collect fragments using a brush. After you have collected the fragments, you need to throw away the brush. Treat the surface with potassium permanganate from a spray bottle. This will make the halogen lamp burn brighter than before.
Conclusion
When replacing a light bulb, you need to be very careful. There is a risk that the glass will break or deteriorate to such an extent that the device may no longer be suitable for further operation. To find out whether the lamp is suitable for your device, carefully read the operating instructions. Each manual tells you what type of lamp base the correct lamp has and how to install it correctly.
Article
How to change the light bulb in a Neff oven?
closet
- To avoid damage, place a kitchen towel in the cold cooking compartment.
- Unscrew the glass shade by rotating it to the left and remove.
- Insert a new bulb
of the same type. - Replace the glass shade.
- Remove the kitchen towel from the oven
Interesting materials:
Is it possible to study externally by correspondence? Is it possible to step on your foot if you have a broken ankle? Is it possible to learn to program from scratch? Is it possible not to take a middle name in Russia? Is it possible not to appear in court as a witness? Is it possible not to carry insurance with you? Is it possible to wear a shirt and tie without a jacket? Is it possible to wear flip flops in the city? Is it possible to overtake in the oncoming lane? Is it possible to pour cold water on your feet?
How to replace an oven light bulb
Today I will talk about how to replace the lamp in the oven. The most important thing is to choose the right lamp and follow safety precautions.
First of all, you need to turn off the power to the oven. To do this, you need to turn off the automatic switch leading to the oven on the distribution panel inside the apartment. If the oven does not have its own automatic switch, unplug the oven from the socket. If this is not possible (for example, the plug is behind the oven), then you will have to turn off the power to the apartment by turning off the input circuit breaker for the entire apartment. The process of unscrewing the light bulb will not take much time.
After turning off the power to the oven, turn the glass shade behind which there is a lamp. If you have been using the oven for a long time, problems may arise with unscrewing the lampshade. You can try wearing rubber or rubberized household gloves to prevent your hands from slipping.
If that doesn't work, you can use food grade lubricant. I use SMS-5, if there is no food grade, you can use non-food grade WD-40 (it has a characteristic smell, so after replacing the lamp, do not forget to ventilate the oven, warm it up and ventilate it again).
It takes a couple of short presses to add just a little grease, wait until it flows along the entire perimeter of the connection between the lampshade and the wall of the oven. Use a paper towel to remove any grease that drips down or accidentally gets onto other areas of the oven. Leave for 10 minutes.
Try turning it again, everything should come out easily.
If even now it doesn’t work out, then take insulated pliers with rubberized handles (so they don’t slip) or regular ones, but then you will need to wrap the lampshade with a strip of thin rubber (for example, you can cut a piece of a Russian-made sports rubber expander for punch training, it is brown and flat ) or a rubber glove.
Take the pliers by the jaws and grasp the lampshade with the handles. Slowly, little by little, increase the pressure and turn the lampshade. Do not overdo it by squeezing the handles of the pliers - you want to secure it tightly and not crack the lampshade. If you are not confident in your abilities, it is better not to use this method, but ask a friend who has more strength than you to help you.
Remember that you cannot use the oven with a broken lampshade!
As soon as you remove the lampshade, carefully, preferably with gloves, unscrew the lamp.
The lamp may have cracked and could easily break, injuring your hand!
Pay attention to whether there are any inscriptions on the lampshade. On mine there was an inscription indicating that the maximum power of the light bulb is 15 watts.
Put the lamp in place. And turn on the general circuit breaker if you have cut off power to the entire apartment.
Place the light bulb in a bag or box (so it doesn’t break on the road) and take it with you to the Svet specialty store or hardware supermarket. You need to buy not just a small light bulb like for a lamp or refrigerator, but a special one that is resistant to high temperatures. The packaging should state that the lamp can withstand temperatures of 300 degrees Celsius and indicate an oven.
Be sure to compare the dimensions with your oven light bulb, because if it is even a little longer or wider, it may not fit inside the lampshade and it will not fit into its place in the oven. Ideally, take the lampshade with you, in case the same lamp as yours is not available in the store.
After you purchase a new lamp, turn off the power to the oven again, screw the lamp into the socket in place of the burnt-out lamp, and then screw in the lampshade until it stops.
I also recommend that you pay attention to our other articles about ovens:
- How to clean an old dirty oven from grease and carbon deposits.
Thank you for your attention and see you on the Good Recipes website!
