It's time to wash the mosquito net on the plastic windows. For some reason, most people remember her at the beginning or end of the season. In fact, this should be done every month. A lot of dust collects in small cells, it creates plugs - it closes the openings and prevents air from entering the room. Let's add to this the accumulation of allergens and quickly run to restore order. How to properly wash the mesh?
How to remove it from the frame?
To wash the mosquito net, you need to remove it from the fastenings. It's easy to do:
It is necessary to remove pots and other objects that may interfere with the windowsill.- With your fingers you need to grab the ears that are on all mosquitoes.
- Holding them, the structure is lifted up so that it comes out of the lower grooves.
- The bottom of the canvas is directed towards the street, but you should not lean out of the window too much.
- Then you need to lower the mesh down so that it comes out of the upper brackets.
- All that remains is to turn the net upside down and bring it into the apartment.
If the grid is attached to flags, then to gain access to them you need to open a second window and turn them to the side. When fixing the product on plungers or hooks, you will need to loosen their fastening.
The video will show you how to remove a mosquito net:
Recommendations for removing mesh
Regardless of what type of product you have installed, if you decide to remove the mesh, you should choose dry, calm weather. The mesh has a large area, so a gust of wind can tear it off when you unscrew it, or tear it out of your hands. If it falls to the ground, the frame is likely to break. The rain will drip into your face, which is not very pleasant.
If the structure has shutters, then you won’t have to think about how to remove the mesh from the window . You just need to open one leaf and unscrew the external fasteners.
Folk remedies
To get rid of accumulated dirt, it is not necessary to purchase expensive compounds. You can wash the mesh using folk remedies.
Ammonia
If the product is very dirty, it is recommended to use ammonia.
Procedure:
- pour warm water into a basin;
- add ammonia to it in a ratio of 1:3 and mix;
- rinse the mesh under running water;
- dip the brush into the prepared solution, clean the mosquito on both sides, pay special attention to stubborn dirt;
- Rinse the product in clean water, let it drain, and wipe with a dry cloth.
Lemon juice
Lemon juice works well for stubborn stains. Moreover, it is absolutely harmless to the material from which the mesh is made. To prepare the solution you will need 1 liter of water and the juice of one lemon.
The procedure is as follows:
- Rinse the mesh under the shower.
- Pour the solution into a spray bottle.
- Moisten the surface to be treated.
- Leave to act for 10 minutes.
- Rub the mesh with a brush, rinse with clean water, and dry.
Baking soda solution
You can use a baking soda solution to remove dust and dirt. To prepare it, dissolve 1-2 tablespoons of soda in 1 liter of water.
Instructions for use:
- moisten a brush with soft bristles in a soda solution;
- with its help, apply the product to the surface that needs cleaning;
- leave for 5-10 minutes;
- wash off the composition with clean water, especially contaminated areas are additionally cleaned.
When brushing the surface, do not press too hard on it. Applying excessive force will cause the material to stretch and bumps will appear on it. They look unsightly and have a negative impact on air circulation.
How to clean a plastic window sill from stains and yellowness?
Yellow spots on a plastic window sill can appear for various reasons, and simply wiping will not be enough. You will have to use a detergent, or even more than one. One of the reasons for yellowness on plastic is indoor plants, when water spilled from the pan is not removed in time. Grease stains can also turn yellow if pots, plates of food, and bottles of vegetable oil are often placed on the windowsill.
It happens that the spots appear not yellow, but black. This is dust and dirt that over time penetrates the pores of the window sill. It is difficult to wash, and the use of brushes and abrasives is extremely undesirable.
A melamine sponge removes stains from plastic well. It works like an eraser and sweeps away dirt from porous surfaces.
Grease stains can be easily removed by a solution of water and ordinary laundry soap, which contains a large amount of alkali. The soap should be grated directly into a bucket of water and applied to the stains with a sponge.
A solution of vinegar and water in equal proportions will also help against stains on plastic. Pour it into a spray bottle and direct it onto the stain. After 10-15 minutes, remove the liquid with a sponge and wipe the area with a cloth soaked in water.
Household chemicals
You can get rid of dirt on the mesh using household chemicals. Top 3 inexpensive and effective remedies:
Dishwashing liquid . It needs to be diluted in warm water and whipped until foam forms. The mesh is placed vertically in the bath at a slight angle. The solution is applied to it with a brush, left for 15 minutes, after which they pass over the surface of the product again. Wash off dirt and foam with a shower.- Liquid soap . It is used in a similar way to dishwashing detergent.
- Washing powder . Before use, it must be thoroughly dissolved so that no visible granules remain in the basin. It is best to use hand washing powder that does not contain bleach.
If the mesh has not been washed for several seasons and is very dirty, it needs to be soaked. To do this, take a full bath of water and immerse the product in it. To prevent it from floating, place a small weight on top, for example, a towel. After 15 minutes, wash the frame using the selected product.
When starting cleaning, you need to be prepared for the fact that after getting wet, the product will emit an unpleasant odor . Therefore, it is better for people suffering from allergies to ask their household for help.
How to clean a mosquito net, video instructions:
Is it worth removing mosquito nets for the autumn-winter period?
For the manufacture of mosquito nets, materials are used that have a high degree of resistance to adverse weather conditions, however, it is better to remove these elements of window structures for the winter. If this is not done, the following may happen:
- the synthetic fabric will stretch greatly, which will cause the cell size to increase in some areas - this phenomenon is usually provoked by ice that regularly forms on the mesh;
- icicles or icy lumps of snow falling from the roof will sooner or later tear the mesh;
- the paint will peel off from the frame much faster, and the window structures will lose their aesthetic appeal.
Mosquito nets are compact products that do not require much storage space. In an apartment, you can place them on a glazed balcony or find a place for them between the closet and the wall. These products must be washed first.
Do not forget to also remove dirt from fasteners located on the street side.
How often should you wash?
The mesh must be washed as it becomes dirty. If a person suffers from allergies, then rinse it at least once a week.
You should take care of the product with the same frequency if you live near highways or objects under construction. There is no need to use chemicals every time. It is enough to rinse the frame with running water .
If the windows overlook a park or other dust-free landscape, then you can wash the mesh once every 2-3 months.
However, if it comes into contact with visible contamination, such as bird excrement or insect excrement, cleaning should be carried out immediately. Such substances are very caustic, and therefore can lead to the destruction of fibers and their burnout.
How to remove tape from a plastic window?
After installing a window, you often have to remove the adhesive tape from the plastic. Unfortunately, this does not go unnoticed. The tape leaves sticky stains to which dust quickly sticks.
It is better to remove traces of tape immediately before the glue hardens. You need to glue a new tape to it, press it and quickly remove it from the plastic surface. The procedure may need to be repeated several times to completely remove the marks. If the glue has not completely come off, you can use an eraser.
A product for removing tape marks from plastic can be prepared from baking soda and water. The soda must be diluted with water so that it resembles the consistency of sour cream. Apply the paste to the tape stains and leave for 2-3 hours. Afterwards, wash everything off with a wet cloth. If the marks do not wash off the first time, you can repeat the procedure.
Possible mistakes
If you wash the mesh incorrectly, it will quickly become unusable, but with the right approach, the product will last at least 8 years.
Mistakes to avoid:
Aggressive compounds should not be used. They negatively affect the strength of the fibers, which will quickly collapse under the influence of the scorching sun and rain.- It is not recommended to use vinegar. It is especially dangerous to use the essence.
- There is no need to wash the mesh with sponges or lint rags. Small particles will settle in the cells and prevent air flow from entering the room (more dust and allergens always settle on the fabric).
- When choosing a brush for cleaning mosquitoes, preference should be given to products with soft bristles. Metal brushes should not be used.
- The stream of water from the shower should be directed at an angle of 30-45 degrees. If you pour water directly, the mesh will stretch.
When using detergents, you need to take care of the safety of the skin of your hands by protecting them with rubber gloves.
Why wash the mesh?
Timely washing of the mosquito net helps to avoid most problems and unnecessary expenses for repairs.
By rinsing the mesh in time with warm water, you:
- You clean its canvas from dust, fluff, and pollen that has settled in the cells. If you leave it on the mesh, dirt will get inside the house when it is ventilated.
- Remove insects stuck in the mesh and small debris that may have been blown by the wind. All this makes the net attractive to birds, which can damage the canvas with their beaks or claws - it is better to get rid of the debris in time.
- You return the grid to its additional functions. Only a clean mosquito net can be a filter that prevents dust and allergens from entering the house.
Another plus is that regular washing makes the mosquito net more aesthetically pleasing and neat in appearance.
Helpful information
Tips for caring for a mosquito net:
- You need to remove the mesh in dry, windless weather, because... gusts of wind can tear it out of your hands and cause it to fall;
- when removing the mesh, you should not lean on it - the structure will not be able to support the weight of a person;
- You cannot put too much pressure on the mesh so as not to tear it.
If the product is not heavily soiled, you can clean it using the dry method. A vacuum cleaner is used for this, but only equipment whose power can be adjusted manually is suitable.
The choice is made in favor of a nozzle with a textile spout. The power should be set to minimum.
The frame is placed on a towel or other material of a suitable size and carefully passed over its surface with a vacuum cleaner. This cleaning will get rid of loose dirt :
- from dust,
- cobwebs,
- plant pollen.
It is recommended to vacuum the mesh on both sides.
You will find a lot of important and useful information about fast and effective window cleaning in this section.
Weekly care rules
To prevent seasonal cleaning of the mosquito net from turning into a real epic, we recommend carrying out simple procedures once a month:
- wipe the top layer of dust with a damp cloth or a special broom;
- To remove dirt, it is convenient to use a regular vacuum cleaner - turn on medium power mode, install a soft brush attachment and walk over the entire surface of the mesh.
Such simple cleaning options are ideal for washing swing mosquito nets, which are most often installed on balcony doors.
We recommend reading how to wash your hands of Moment glue.
Read: is dichlorvos effective against cockroaches, moths and bedbugs?
Find out how to use Laska gel for washing.
