Is it possible to wash holofiber pillows in a washing machine: care rules

Sleep is an important part of human life. And the right pillow is a fundamental part of a night's rest. In the modern world, products with synthetic fillers are in great demand. The most popular is holofiber - a non-woven material with air fibers.

The pillows are distinguished by their lightness and low weight, softness and elasticity. Over time, any product gets dirty after daily use, and housewives think about caring for such an item, because if washed incorrectly, a pillow with holofiber loses its properties.

Features of the filler

Holofiber material is obtained synthetically and is similar to cotton wool. It has a loose structure, warmth and comfort for sleeping. To prevent it from losing its structure, you need to monitor the fibers, they should not fall off.

Note! The fibers are created from polyester, which are spun. Thanks to this, they quickly return to their previous shape, the material is safe for health, environmentally friendly and hypoallergenic. It does not absorb moisture and odors, and fungi and bacteria do not form in it.

Washing frequency

Manufacturers recommend washing products once every six months, but washing once a year is sufficient. Frequent washing may reduce the life of the pillow.

The need for ventilation

In order not to expose pillows to frequent washing, it is better to ventilate the products; this method may well replace one wash.

Important! Leave it in the open air in a horizontal position, without hanging it on a rope, then the shape will remain unchanged.

The effect of frequent washing on wear resistance

Washing fibertek pillows can affect the structure of the pillow, because the fibers can become deformed, especially if washed incorrectly. Therefore, you should not go through this process frequently; airing a couple of times a year and washing it once will be quite enough to keep the holofiber clean.

Wash or dry clean

There is no point in sending holofiber products to the dry cleaner; knowing the washing rules, you can easily cope with the process yourself. The price of the products is acceptable, it is not advisable to pay for dry cleaning services to preserve it, it would be an unjustified waste of money. It's easier to wash the pillow yourself.

How to restore a pillow when something goes wrong?

If the pillow was washed and dried incorrectly, the filling will be uneven, and the appearance and shape of the pillow will be changed. To correct the situation, you need to put the packing in order.

To do this, you need to remove the holofiber balls into a deep basin. If the pillow cover has a zipper, this will make the task easier. If there is no zipper, you will have to rip the product along the seam to remove the contents.

Then you need to disassemble the filler. This can be done by hand or using a slicker brush, which is used for combing animals.

This will take a lot of time and require care, and the pillow will not be the same as it was before washing. The maximum that can be achieved is to give the pillow the proper appearance and properties that will allow it to be used for some time.

Machine washable

How to wash a holofiber pillow in a washing machine so as not to spoil the filling; the intricacies of this issue will be discussed further.

Soak

There is no need to pre-soak when using an automatic washing machine. Leaving fibers in water for too long can lead to a deterioration in their properties and shape.

Important! Therefore, there is no need to choose modes that take a long time to erase.

Delicate mode

When choosing to wash in a washing machine, the best option would be to set it to a delicate cycle. You can also set the manual mode for 10-30 minutes.

Temperature

Exposure to high temperatures will also negatively affect the product. Therefore, the water temperature is set to 30-40 degrees, no more.

Detergent

The choice of detergent should be given special attention. It is better not to choose products with strong aromas, as they can interfere with good sleep. For the same reason, there is no need to use air conditioners.

The best option would be to use special washing gels; they have the ability to wash out quickly, which is good in this case, because then there is no need to use an additional rinse, which is also not advisable. In addition, powders leave streaks on pillows.

Note! Bleach with chlorine cannot be used for holofiber products.

Machine spin and dry

Items cannot be spun, so when manually setting the mode in the washing machine, you need to select the option of washing without spinning. Dry the pillows only horizontally; you can lay a towel or cloth under it.

Important! To ensure that machine washing has the least impact on the product, you can put it in the wash. towel machine

Common mistakes when cleaning and washing pillows

Popular mistakes housewives make when caring for holofiber:

The main mistake is incorrect position when drying. Holofiber should dry lying down.
High washing and drying temperatures. Holofiber cannot be ironed.
Negligence in caring for the filler, i.e. intensive spinning in the drum, twisting during hand washing.
Using a steamer - do not expose the holofiber to heat.
Attempts to bleach the napkin using aggressive means. If you have a stain, it would be wiser to rip up the seam and remove the filler than to wash everything together and ruin the product.

Handwash

The option of washing pillows by hand is the best in terms of preserving their structure and properties. This will not take much time, because contact with water should be short.

The product is pre-soaked, for a maximum of half an hour, the water is warm, the detergent is dissolved in it - washing gel, or you can use unscented shampoo.

After soaking, the pillow is wrung out, do not twist it, and then rinsed in cool water until the detergent is completely removed.

If the bedside table is very dirty

If the pillowcase is heavily soiled, it is better to remove it, leaving the filler separately. If this is not possible, then first rub the product with ordinary laundry soap, and only then soak it for further cleaning.

Filler recovery

After the pillow has dried, fluff up the filling. To do this, if possible, remove the napkin, beat the holofiber with your hands and straighten it out. It is also necessary to comb it to fluff it up to its original state as much as possible. Convenient to use brushes for pets.

How to fluff

If the filler has lost its lightness and softness as a result of improper care, it can be saved by the following actions:

remove the stray holofiber from the pillow cover;
place it in a large container;
fluff all the fibers in small portions using a hair massage comb or an animal hair brush;
return the padding to the case.

Such manipulations will make the pillow voluminous again, prolong its life and allow you to postpone the purchase of a new one.

If you wish, you can purchase holofiber at a sewing and crafts store and fill the pillow cover with it yourself. Such an update will not cost much.

Proper drying

The drying stage is also important; you should not use any heating agents or spin the pillows in the washing machine. It is pressed with your hands, the water is carefully removed, there is no need to twist it. Afterwards, the product is placed on a dryer or other place where it can dry in a horizontal position. You can place a terry towel under it; you should turn it over every few hours to speed up the process.

Important! The room must be ventilated or dried outside.

Restoring shape

The pillow is beaten by hand; if possible, the filler is removed and combed for good fluffing. These actions begin after all elements have completely dried.

How to return a pillow to its original shape when drying

All manufacturers say that this filler does not retain liquid, and drying it is not difficult. After washing, the pillow should be placed on a flat surface without squeezing, the water will drain off on its own. When it stops dripping, place it in the air or a towel so that the excess moisture is completely absorbed.

Various aggressive squeezing manipulations (in a machine or manually) can damage the filler. Such products can only be dried in a ventilated area, as well as on the balcony or in the yard. The holofiber is whipped several times, this is necessary so that it takes the desired shape and there are no lumps left.

Wrong wash

There is no need to wash pillows often. It is also prohibited to wring out or dry in a non-horizontal position.

It is necessary to use detergents that have minimal odor. After all, pillows are used for sleeping, and inhaling strong aromas is not beneficial.

Prolonged exposure of the filling to water can ruin it, so before washing holofiber pillows in the washing machine, you do not need to soak them. And choose the delicate mode or the shortest option.

How to wash a holofiber pillow in a washing machine

You can wash the pillow in a machine only in the delicate wash mode without strong spin.
High-quality washing of any products with synthetic filler requires compliance with the following rules:

Pillows should not be soaked. If you want to wash it in the machine, add a dry item.
Select the delicate wash mode (or manual). There is no such mode - we slow down.
Regular powder is not suitable for washing pillows. It leaves streaks and is difficult to wash out of porous padding. It is better to use liquid laundry detergents.
Drying is done only by hand. Before washing, turn off this function on the machine.

The pillow dries out very quickly, it is better if it is left in the air. You need to periodically turn the product over until there are no wet spots left.

The exception is heavily soiled pillows. In this case, before sending it to the machine, you need to soak the product with detergent, wait a little, and start washing.

Holofiber care

Holofiber does not absorb moisture, does not retain unpleasant odors, and does not create conditions for the appearance of bacteria and harmful microorganisms. The stuffing breathes well, even in high humidity it is not afraid of mold and mildew.

Caring for holofiber pillows is simple. Frequent washing is not required; the products can be aired several times a year if desired. It is better to ventilate the pillow on the balcony or on the street, where fresh air will be provided. It is better not to leave the pillow in direct sunlight.

If stains appear on the cover, they can be washed locally with a soap solution.

Washing too frequently will cause the pillow to become unusable. You also need to know that products made from holofiber cannot tolerate ironing - high temperatures will cause the filler to stick together and flatten.

Advice! It is best to wash in the summer; at this time you can dry the pillows without problems and with high quality. In winter, it will be more difficult to organize thorough drying.

Holofiber pillows are very easy to use and easy to care for. Correctly following all recommendations regarding washing the product will significantly extend the life of the pillow, maintain its original shape, and will also prevent the filling from curling and clumping.

This article will tell you about washing pillows made from bamboo, and this article from synthetic padding.

What can replace balls for washing down jackets?

What can replace balls for washing down jackets? The most popular and sought-after alternative are tennis balls, but not small white ones, but large green ones. It is enough to put 3-4 of these tennis balls in the washing machine drum to achieve an effect similar to that of special balls.

Interesting materials:

How to make the zoom smaller on the desktop? How to zoom to full screen? How to make a Moorish lawn? How to make the fur on the hood fluffy? How to make the Start menu in Windows 10 like in Windows 7? How to make the taskbar smaller in Windows 7? How to make Mercy Mk 11? How to make burlap softer? How to make bed linen softer? How to make a knitted product softer?

What is bamboo filling in a pillow?

Bamboo fiber filling is a modern and high-tech material. One of its main advantages is resistance to pollution. With proper care it can last a very long time. Caring for bamboo filling is quite simple. Pillows and blankets made with these natural fibers do not require frequent washing.

Popular methods that don't work

There are many websites on the Internet that recommend using a vacuum cleaner or hair dryer to get rid of lumps. We tested both of these options and can say with confidence that they are ineffective in the case of padding polyester. Previously, we conducted a similar experiment with a down jacket and there these methods worked a little better.

Using a vacuum cleaner

The method is to use a bag and a vacuum cleaner with reverse mode. The jacket is placed in a bag and the air is pumped out of it. Then switch the vacuum cleaner to reverse mode and fill the bag with air again. This is repeated several times.

This method works for clothes made from natural down, but not padding polyester. Artificial filler has a different structure and crumples into denser fragments.

Using a hair dryer

Another ineffective way is to use a hair dryer. This procedure is done with a slightly damp jacket. You need to turn on the hair dryer at medium power and supply cold air. While blowing through the filler, you must simultaneously level and smooth it with your hands. In this way, the clothes should be processed on both sides.

It is difficult to call this method effective. For the most part, you will still have to work with your hands; the air stream will only dry the jacket and that's it.

Beating with a hanger

Surprisingly, with the help of hangers you can not only store things, but also beat up the padding polyester if it has rolled into lumps after washing.

What do we have to do: