Cubic zirconia is a synthetic semi-precious mineral that imitates diamonds. Despite the fact that the stone is not natural and grown in a laboratory, it is very popular among women.
And this is not surprising, because its brilliance and depth are amazing. Cubic zirconias are combined with gold and silver; the metal emphasizes the shine of “artificial diamonds.”
But over time, the jewelry becomes dull, the stones lose their transparency and shine. To restore their attractiveness, you need to carry out high-quality cleaning. There are 2 options - take the jewelry to a workshop or clean it at home.
How to clean cubic zirconia to make it shine
Cubic zirconia is a synthetic semi-precious mineral that imitates diamonds. Despite the fact that the stone is not natural and grown in a laboratory, it is very popular among women.
And this is not surprising, because its brilliance and depth are amazing. Cubic zirconias are combined with gold and silver; the metal emphasizes the shine of “artificial diamonds.”
But over time, the jewelry becomes dull, the stones lose their transparency and shine. To restore their attractiveness, you need to carry out high-quality cleaning. There are 2 options - take the jewelry to a workshop or clean it at home.
Gold cleaning
When worn frequently, gold jewelry becomes dull and becomes covered with dust and greasy stains. Then it is necessary to clean the products; for this, the following available means are used:
- To remove minimal contamination, use a soap solution. To do this, warm water is mixed with soap shavings or shampoo. The decoration is placed in the liquid for 2 hours. Then the dirt should be cleaned with a soft bristle brush and polished with velvet.
- To remove stubborn stains, ammonia is used. A clean rag is dipped in ammonia and the metal is wiped, and then the product is rinsed with soapy water and polished.
- Mix crushed chalk, Vaseline, soap shavings in a 1:1 ratio to obtain a homogeneous mass. Apply the product to dirty areas with a napkin and wipe. Rinse the product with water and dry.
- Add 2 tbsp to 100 ml of boiled cooled water. spoons of salt, stir. Immerse gold items in a salt bath for 12 hours, then rinse under the tap and wipe.
- Mix 25 g of white clothes powder and 200 ml of water. Place the jewelry in the liquid, after 60 minutes, rinse and wipe with a flannel napkin.
- To clean white gold, use a solution consisting of ammonia and water (1:1 ratio). It is recommended to add 2-3 drops of shampoo to the liquid. The jewelry is dipped into the liquid, after half an hour, rinsed with water, and wiped.
To ensure that gold does not lose its shine for as long as possible, it is important to properly care for it. To do this, do not forget to take off your bracelet, ring or other item while cleaning or cooking. Protect your jewelry from chemicals that discolor the metal.
To store gold jewelry, prepare a separate box; separate each piece of jewelry with soft napkins to prevent scratches from appearing on their surface. When cleaning, it is strictly forbidden to use hard brushes and aggressive chemicals.
Methods for cleaning silver items
Silver items tarnish from time to time and become covered with dark spots. To clean silver, use the following methods:
- Place the decorations in a bowl with a foil-lined bottom. Sprinkle the rings with soda until it covers them. Then cover them with a second piece of foil, fill them with hot water, and rinse after 10 minutes.
- Cover the bottom of the bowl with a sheet of foil, place the silver on it, cover the jewelry with baking soda, salt, and add 5 drops of dishwashing liquid. Then pour boiling water into a bowl, and after 15 minutes, rinse and dry the products.
- A regular eraser removes dirt and blackness from the surface of silver. This method is only suitable for smooth products without indentations.
- Mix crushed chalk with ammonia until a creamy consistency is formed. Apply the mixture to a soft-bristled brush, wipe off the dirt, and rinse the jewelry.
- Chop the potatoes, add 100 ml of water and put silver in there. After 5 minutes, the jewelry is taken out and polished with velvet.
- Mix toothpaste with baking soda and ammonia in equal quantities. Apply the mixture to the jewelry, rub, and then rinse thoroughly. This is an aggressive method that allows you to remove stubborn stains.
If you are going to clean blackened silver, be careful not to scratch its surface. It is recommended to rinse silver with a matte surface with soapy water; hard brushes and abrasives are prohibited.
Cleaning silver and gold jewelry with cubic zirconia
To keep the stones shiny, the products need to be cleaned once a month.
Cubic zirconia is a durable and hard stone that can be cleaned in any way you like:
- Special products for jewelry in the form of liquid or paste. Caring for cubic zirconia involves using soft brushes, which can be purchased at a jewelry store.
- Toothpaste. The product is treated with the product, cleaned with a brush, then rinsed and wiped until it shines.
- Ammonia. Ammonia is diluted with water in a ratio of 1:6. Decoration with cubic zirconia is placed there for 3 hours if cloudy or for 12 if there is intense dirt. Then the product is rinsed and dried with a cloth.
- Soap solution. You can clean silver with cubic zirconia using a light soap solution. If necessary, wipe the product with a brush and then polish it with velvet.
Cubic zirconia is a picky stone with amazing properties: high strength, density, resistance to chemical compounds. In terms of aesthetic parameters, “artificial diamonds” are not inferior to real ones.
Gold and silver jewelry with cubic zirconia look amazing and are durable. The main thing is to periodically clean your jewelry and remove it before doing housework.
vsepodomu.ru
Basic rules for caring for jewelry
- Avoid unnecessary contact with household chemicals and sharp objects. Be sure to remove your rings and earrings before any cosmetic procedures.
- Protect accessories from contamination. Experts advise that after wearing, put them first in a special container with compressed air, and then in the box - this will help get rid of dust, which invariably leads to damage to your favorite jewelry. You should also wipe them regularly with a soft cloth.
- Monitor the temperature. Jewelry products supplemented with cubic zirconia feel best in a cool and dry place. Sudden changes in temperature can have devastating effects. In particular, the glue that holds the minerals in place may deteriorate. The result is deplorable: the stones come off and are lost. Therefore, try to store new clothes away from heating appliances, direct rays, and windows.
- Each ring has its own place! The ideal option would be to provide each model with its own box, special bag or box. But keep in mind that some types of wood with their fumes are dangerous for jewelry and can cause irreparable harm to them. If you put all the jewelry together, they can intertwine, scratch each other, and ruin the metal and gems. Or even darken by entering into a chemical reaction with each other.
Ways to clean gold with cubic zirconia without damaging the jewelry
How to clean gold with cubic zirconia? Oh, how often this question turns out to be a little late. It is human nature to quickly get used to everything. We start wearing a new beautiful piece of jewelry and quickly get used to it. There is no longer that enthusiastic looking at small details. The mysterious play of light on the edges of such a beautiful stone, albeit artificial, has already become familiar! While we take care of our expensive jewelry, sometimes we simply forget that it needs our constant care and special care.
The photo shows the decoration before and after cleaning
Three ways to “delight” your gold
You can resort to one of three methods for cleaning bracelets, rings, earrings, necklaces and pendants:
- gold with cubic zirconia can be cleaned yourself using special devices or industrial means;
- clean it yourself, using proven means at hand;
- take it to a jewelry salon for professional cleaning.
Of course, the smartest thing to do would be to go to a salon. True, this will require certain financial costs and time. But everything will pay off with interest. After all, a specialist will not only remove dirt, but also polish the gold, eliminating scratches invisible to the eye, which cause the loss of shine and brightness of the precious metal. There is no need to talk about the stone - after professional cleaning, all its facets will find a second life and sparkle like diamonds. It’s not for nothing that even experienced jewelers admit that it can be difficult for them to distinguish good cubic zirconia from a real diamond!
If time is tight, and you don’t want to spend money on a trip to the jeweler, all you have to do is take everything into your own hands. Moreover, there are effective ways to clean jewelry at home:
- if you have a special ultrasonic device, it is enough to place the jewelry in it for 5-7 minutes, after which all that remains is to go through it with a special brush to remove deposits, and then wipe it with a polishing cloth;
- use special care products for gold jewelry with stones, which can be purchased at specialized jewelry stores.
In the photo: 1. Ultrasonic device for cleaning jewelry.
2. A solution, the recipe for which is described below. And, finally, the most cost-effective way is to use improvised means. Fortunately, in reality there are not so many safe and effective remedies!
- Pour ½ teaspoon of shampoo (or liquid soap) into a glass of warm water, add 10-15 drops of ammonia, mix well, place the gold jewelry for 2-5 hours. After taking it out, rinse well under running cold water, wipe dry, then polish with a special cloth. If there are deposits in hard-to-reach places, clean with a brush (you can use a toothbrush with soft bristles) and again put in the solution for 5 hours.
- Add ½ teaspoon of shampoo and ammonia to a glass of warm water. Leave for half an hour, then rinse and wipe thoroughly.
- If the product does not need cleaning, but you want to return it to its original brightness and shine, dip a cotton swab in a solution of equal parts ammonia and water and carefully walk over it.
- You can quickly clean gold and cubic zirconia by dipping them in regular vodka or half-diluted pharmaceutical alcohol for a few minutes.
Ring with cubic zirconia in a cleaning solution
Trust but check
Cubic zirconia is a synthetic diamond that has “inherited” not all, but very many of the properties and characteristics of its noble “prototype”. It is enough to mention only the two most important ones - incredible shine and very high strength.
Professionals note that gold with cubic zirconias is best cleaned using the same technology as jewelry with diamonds. This means that when removing contaminants, you should avoid using household cleaning products used for washing dishes, cleaning tiles and earthenware. The alkali and coarse abrasive particles they contain can cause dullness to the product.
Even with the rare use of such aggressive agents as bleach, vinegar and hydrogen peroxide, gold will gradually lose its natural shade, and the stone will lose its bright shine.
mamamoet.ru
Preliminary acquaintance
Careful handling and care significantly increase the service life of accessories. However, it is important to understand the characteristics of the stone, its history and properties.
The whole world learned about cubic zirconia in the middle of the last century. Moreover, the massive supply of incredibly cheap diamonds from an unknown deposit instilled panic in businessmen. But it soon became clear that these were not diamonds, but their artificially grown analogues in the laboratory. Due to their similarity to royal jewels and low price, they immediately found thousands of fans. After all, they represented a real chance to get an original piece of incredible beauty for a modest sum - even the simplest pendant or bracelet with such a gem looks luxurious and respectable.
Cubic zirconia is a synthetic twin of diamond, but is significantly inferior to it in hardness. Therefore, it requires special processing, which is how experts distinguish an artificial diamond from a real one.
How to clean gold jewelry with stones at home
Among the multitude of precious jewelry, gold items will always occupy a separate position. Their enchanting brilliance, exquisite style and inherent magnetism cannot leave any person indifferent. Therefore, in case of any contamination, we tried to clean the gold and stones at home as quickly as possible. In ancient times, solar metal personified the power and strength of the heavenly body. Gold has been credited with many beneficial properties. It was used to heal the soul and body. Aurum is still used in luxury cosmetics and high-precision devices. And gold fixations, before the invention of metal-ceramic implants, were considered a kind of chic and fashionable trend.
Modern high-strength materials have replaced gold in many industries. And only in the jewelry business, yellow metal continues, for a century now, to hold the palm. This is greatly facilitated by the filigree of the jewelry, the popularity of the products at social events and, of course, the considerable cost of the aurum itself. Precious stones serve as an organic complement to the solar metal.
An elegant ruby drop in a pendant emphasizes sophistication, the sparkle of cubic zirconia in earrings attracts fans, a mysterious amethyst on your finger suggests that you have a dreamy and vulnerable nature, and rich green emerald cufflinks or a brooch reveal a strong and purposeful person.
Owners of gold jewelry love their chains and rings so much that they wear them on their bodies almost without taking them off. For some it is a symbol of unity with a loved one, for others it is an indicator of status, for others it is a habit. But no matter what purpose the owners wear their jewelry, sooner or later they notice how the gold becomes covered with patina and the gems lose their shine. Then a logical question arises: “How to clean gold with stones?” After all, careless mechanical action, overly aggressive reagents, or simply non-compliance with the rules of use can lead to the fact that exquisite earrings completely lose their appearance and even a jewelry workshop will not undertake their restoration.
Why do gold jewelry with stones lose their appeal?
First of all, you should understand that any jewelry changes its original appearance over time. Even if you only wear them on holidays and store them in a separate case.
Oxidation in the air, interaction with various surfaces and human sweat contribute to the formation of a cloudy film on jewelry, darkening and accumulation of dirt in secluded places.
Unfortunately, even frequent hygiene procedures will not save your products from plaque. Sometimes the body’s natural reaction to impurities in metal is so strong that after a couple of hours of wearing it can leave its mark on the links of a chain or bracelet.
For those who like to wear rings every day and want their gold jewelry to shine, you should adhere to the following fairly simple recommendations:
- Try to protect jewelry from exposure to direct sunlight and excess moisture. Before going to the beach or swimming pool, it is better to remove gold chains and earrings.
- Protect your jewelry from harsh chemicals. Cleaning, washing and washing dishes is best done with your hands without rings on them.
- If you wear it constantly, do not forget to inspect the products monthly and disinfect them. The best way to clean gold will be described below.
- Store each item separately. Especially if various gems are inserted into them. Ideally, a special box should be allocated for jewelry.
These rules are simple, but following them will greatly simplify your jewelry care and preserve its attractive appearance for a long time.
Classification of jewelry with stones
There are many methods for cleaning gold with stones. Some of them add a special shine to sapphires and emeralds, others clean pearls and amber well, and others return the former transparency to rock crystal and garnet. However, there is no universal method that would be suitable for all minerals.
Different structure, origin, cut and other characteristics determine the susceptibility of jewelry to cleaning agents.
The classification presented in the table will clearly show the main differences between jewelry and will help determine what type your jewelry belongs to. Using the information received, you can learn how to clean a gold ring with a stone without ruining it.
Type of decorationFeaturesStones and minerals
With glued stone | Delicate attachment of the gem to the metal. Does not tolerate excess moisture. Only dry cleaning is recommended, since there is a high risk of the mineral falling out of its bed. | — |
With organic gems | In jewelry they stand out in a separate group. They got their name due to the peculiarities of their occurrence. Long before they became fossilized, these minerals were part of living nature. Jewelry with them is very susceptible to the action of alkalis, acids and ammonia. Even a small drop of these substances can permanently ruin an expensive item. | Corals, pearls, amber, jet |
With turquoise | Jewelry with this unique stone is placed in a separate group, since it does not tolerate many cleaning substances and does not even like to interact with water. | Turquoise |
With soft stones | The density of the stone is determined relative to ordinary glass (factor 5), rock crystal (7) and the absolute leader in density - diamond (10). Soft stones have a density coefficient below 5. This means that glass is capable of creating unsightly nicks on them. Therefore, if you are unsure of the hardness of your mineral, it is better to ask a jeweler about it rather than try to determine its density yourself. Otherwise, you run the risk of ruining the appearance of your jewelry. When cleaning such products, avoid abrasives and hard brushes. | A significant part of ornamental and jewelry stones: lapis lazuli, anthracite, mother-of-pearl, falcon and tiger eye, aventurine, onyx, malachite, etc. |
With medium density stones | The density coefficient of these minerals lies in the range of 5–7 units. The stones can leave a scratch on the glass, but deteriorate when they come into contact with rock crystal. | A small part of ornamental and jewelry-ornamental stones, most jewelry stones: Tourmaline, opal, citrine, moonstone, jade, jadeite, rock crystal, amethyst, garnet, aquamarine, obsidian, alexandrite, jasper, amethyst, etc. |
With hard stones | The density of hard stones is above 7 and they are capable of leaving a mark on both glass and rock crystal. | The most precious jewelry and jewelry stones: Ruby, diamond, emerald, sapphire, etc. |
With rhodium plated gold | Rhodium plating is often applied to gold jewelry with stones. It gives products an attractive appearance and is popularly called white gold. The coating is very delicate and does not tolerate abrasive or aggressive chemicals. Therefore, you should read about how to clean white gold with stones at home in the section on soft minerals. | — |
Jewelry with glued stones or turquoise
This group of jewelry does not accept wet cleaning in any form. Therefore, try to avoid immersing rings or pendants with glued stones or turquoise in soap solutions. You should also not swim or take a bath in them. These products are cleaned using cotton wool wrapped around a toothpick. This device is immersed in a 50% solution of medical alcohol and carefully gets rid of dirt on tiaras, earrings, and cufflinks. After all manipulations are completed, the jewelry is wiped with flannel.
Sometimes, when the metal is heavily soiled, it is necessary to use other detergents. In such cases, you should be extremely careful and avoid getting liquids on the surface of the stone and the place where it joins the gold.
Jewelry with organic gemstones
Jewelry made from jet, amber or pearls is always in demand. Some even consider them “living”, unlike other stones. Therefore, the attitude towards them should be as delicate as possible. They become dull in soap solutions, and ammonia is harmful to them.
Even the soda and vinegar we are used to can irreversibly ruin an elegant stone.
The best cleaning agent is the same solution of medical alcohol, diluted 1-to-1 with water. Immerse your jewelry in it for a few minutes. This way you will return your rings and pendants to their original appearance. For particularly heavy stains, use a toothpick and a cotton swab wrapped around it. If you are doing preventive monthly cleaning and have little time, simply wipe the jewelry with a flannel cloth or a piece of suede.
Jewelry with soft stones or rhodium-plated gold
Avoid any abrasives: powders, toothpaste and other similar substances. You should also not use a toothbrush or other devices with bristles. Otherwise, you risk leaving permanent scratches on your stone. To clean such products from contamination, various aqueous solutions are used:
- Sugar. 2 tbsp. l. sugar is diluted with a glass of warm water.
- Solyanoy. Add 2 tbsp to 250 ml of water. table salt.
- Soapy. For 200 ml of warm water, take 2 doses of liquid soap.
Immerse your jewelry in one of these solutions for 10-15 minutes. This time is enough to wash away the deposits on your stone.
There is another common way to clean soft gems - using lipstick. Apply it to the mineral and gently wipe with flannel. The amino acids contained in the cosmetic product will remove dirt and restore the former shine to jewelry.
Jewelry with hard and medium-density stones
There are many recipes on how to clean gold and diamonds. Almost all known methods are suitable for stones with a hard structure. And although they are resistant to various chemicals, you should not experiment too much. Use a long-proven method: mix ammonia with water in a 1:1 ratio and gently wipe the jewelry. You can add a few drops of liquid soap to this solution to improve its properties.
Sometimes owners of artificially grown stones are afraid to clean their products at home. Therefore, people often ask how to clean gold with cubic zirconia. The answer is simple: the same as other jewelry with hard minerals.
prodragmetally.ru
Durable, shiny jewelry
This type of jewelry is made from medical alloy. If jewelry made from a medical alloy has faded, then prepare a solution of 5 g of ammonia (10%), 15 g of borax and 0.5 liters of water.
How to clean gold jewelry? Soak a cotton swab in the solution, wipe the jewelry, then rinse with water. Borax should not be used to clean cutlery due to its toxicity.
How to clean gold and diamonds at home
How to clean gold with diamonds - this question worries many owners of expensive jewelry.
Unfortunately, over time, gold loses its luster and becomes dull and unattractive, and diamonds develop a white coating. How to bring precious metal back to life? And is it necessary to contact a professional, or can cleaning be done at home? Of course, you can clean the metal yourself, and to do this you need to follow a few rules and take into account some features.
Gold and Diamond Cleaning Tools
If you start cleaning gold and diamond jewelry, then first of all you need to remember that this metal is very sensitive to the fat that is on our fingers, and therefore all manipulations must be carried out with gloves.
You will also need a dry velvet cloth and a soft cloth to wipe the product with warm water. If you decide to clean, for example, a gold ring with a diamond, then to clean such jewelry you will need to make a soap solution from low-alkaline and non-abrasive soap (or shampoo).
What other products are suitable for cleaning jewelry at home?
- Soda - diluted with water, then the product is dipped into it and boiled for several minutes. Afterwards, the jewelry must be cleaned with a brush and dried.
- Tooth Powder – Apply tooth powder to your ring, bracelet or necklace using an old toothbrush and thoroughly scrub away any dirt.
- Gasoline, vodka, alcohol, vinegar, ammonia - do an excellent job with dark or greasy stains. After using any of these products, the product must be washed with water and detergent.
- Lipstick - applied to a small cotton swab, which should be used to wipe the jewelry. Removes old stains.
- Onion juice – rub the surface with a piece of onion, leave for a couple of hours without wiping. Afterwards, rinse with running water.
- Coca-Cola - this legendary drink will perfectly clean your ring if you dip it in this carbonated liquid for half an hour.
How to clean products with stones?
If you want to clean jewelry with a stone, then you should know that there is also a correct cleaning algorithm.
- The best way to clean a diamond ring is with an ear stick. Carefully clean the stone from dirt.
- Alcohol will help get rid of greasy stains.
- The grease film on the stone will be removed by gasoline applied to a toothbrush. Do not use tooth powder or toothpaste for this, otherwise you will scratch your gemstone.
A velvet cloth will help you rub the diamond until it shines.
After soaking, you need to clean the ring with a brush to remove dirt from hard-to-reach places
Recipes for caring for jewelry
- If you want to add shine to the surface of your jewelry, then dissolve 3 teaspoons of white sugar in water and soak your jewelry in this mixture overnight. Attention: this solution does not remove dirt;
- Mix a spoonful of washing powder (important: it should not contain chlorine) in a glass of water and leave your treasure in the resulting mixture for half an hour.
- Mix one ampoule of ammonia, hydrogen peroxide and half a teaspoon of washing powder. Pour in a glass of water. Shake the mixture in a glass jar and place gold objects there for literally 5 minutes. After this, rinse them with water and leave to dry. This mixture will help get rid of old dark spots.
What about cleaning white gold with diamonds? Does this kind of cleaning have its own peculiarities?
- A 25% ammonia solution will remove dirt and grease from white gold;
- White gold products can be effectively cleaned by a solution consisting of water (50%) and ammonia (50%). If desired, you can add a soap solution from a low-alkaline shampoo. Simply dip your necklace or ring in this solution for 30 minutes and then rinse with water.
- A hyposulfite solution will help get rid of iodine stains. You can buy it in a special store for amateur photographers.
- You can polish the surface using lipstick and cotton wool, or an ear stick.
What should you avoid cleaning your jewelry?
- Soda - gives gold a matte appearance, removes shine, and therefore this product is best used for silver (for example, for silver spoons);
- Iodine is a metal that can change color under its influence;
- Bleaching – discolors gold;
- Potassium permanganate – promotes metal oxidation.
m
mamamoet.ru
Ancient recipes that will bring back the shine
Folk methods will help you quickly restore a beautiful shine.
- Extract the juice from onions or potatoes, soak a napkin in it, and wipe the decoration.
- Lubricate the item with lipstick, hold for 1 minute, then polish with a dry cloth.
- An aqueous solution of borax will help remove severe contamination, but it will not cope with stains.
- You can clean it effectively and quickly with toothpaste. Apply the paste to a soft cloth and polish the product.
- A hyposulfite solution (can be purchased at amateur photography stores) will help get rid of iodine on gold.
- To make gold jewelry shine, there is an old, but still very effective way: mix egg white with 2 tbsp. l. beer, apply to fabric, polish, rinse under tap, let dry.
Ways to prevent contamination on gold items
Gold should be stored in a box, separating things with soft and hard stones.
Gold with inserts is very fancy and requires special conditions of maintenance. There are a number of rules that will help keep a piece of furniture or decoration in its original form:
- Avoid contact of jewelry with acids, perfumes, and varnishes.
- Take off before going to the sauna, bathhouse, or swimming pool.
- Remove during cooking, cleaning - if these are rings and bracelets.
- Do not leave in direct sunlight.
- Store in a dark, dry and cool place, such as a box.
- Keep stones of different hardness separate from each other. Harder ones can damage soft ones.
- Remove dirt every month, using only those products that you are confident in.
It is recommended to remove jewelry with stones in the evening. You can accidentally damage them while you sleep.
Gold items interspersed with precious stones are a sign of luxury. To ensure that their beauty does not fade over time, it is necessary to provide proper care and follow preventive measures.
You need to carefully use traditional methods and available chemicals. If the jewelry is very expensive to you, it is better to take it to a jeweler or purchase professional products.
Tooth powder or paste
The beauty of the method is in its simplicity: you only need them and an old toothbrush - nothing more. Keep in mind that powder cleans better, but it is rougher, and with paste you will have to tinker longer - but it is more delicate. Another method is to apply bleaching paste to the gold and leave it until it dries - this will bring back the lost shine.
Photo: dkvitin.ru
Jeweler's tips for cleaning silver
You can properly clean tarnished silver at home without difficulty if the jewelry is not inlaid with stones or other inserts. An incorrectly selected cleaning agent can destroy the structure of the stone and damage the fastenings. You can rub the silver so that it shines like new with a velvet cloth or special napkins, usually sold in jewelry workshops. There, the master will help restore the appearance of silver jewelry, if this cannot be done on your own. With the help of special equipment and clean products, this will take no more than an hour. Polishing silver items is not difficult, but it will be pointless if you do not take care of the jewelry in the future.