Sets of felt-tip pens have been extremely popular with both children and adults literally from the moment of their invention, namely since the 60s of the twentieth century. Unlike pencils, they do not require constant sharpening, and their color is far superior in brightness and saturation to a pencil “trace.”
Felt pens are one of the most popular products for children's creativity.
Today, there are several types of stationery products on the market, such as:
- The usual sets of felt-tip pens;
- Whiteboard markers;
- Markers for writing on disks, glass, fabrics;
- With washable ink, etc.
All of the above markers have one common and, unfortunately, negative property: they dry out quite quickly, their color becomes pale and inexpressive. Even if you purchase the most expensive products, this will not guarantee that markers or felt-tip pens will not lose their writing properties. The deterioration in writing quality is due to their design: the dye that flows from the reservoir to the felt tip dries out over time as a result of complete consumption of the paint solvent. Thus, a marker that still contains a lot of coloring pigment stops writing and has to be thrown away.
But it turns out that it is not at all necessary to throw away old markers; you can try to “reanimate” them at home, and in a very simple way. So, what can you do to refill them and restore them to their former brightness?
For small children, it is better to buy washable markers
How to clean marker from Flipchart?
If White Board markers were used, you can wash the flipchart with a regular dry cloth or magnetic sponge. If exposure to writing materials has been extremely intense and messy, a magnetic whiteboard cleaner is ideal.
Interesting materials:
Who is a stock trader? Who is a Store Manager? Who is this treacherous man? Who is the raven in Brawl Stars? Who is a dentist-surgeon? Who is the customer and the performer? Who is the collateral? Who are Zeus and Poseidon? Who are the lark and the owl? Who took part in the great migration of peoples?
It's better not to refill markers
Many of us remember the popular Soviet-era method of refilling felt-tip pens using any alcohol-containing solution. Mom's French perfume, dad's triple cologne, medical alcohol from the medicine cabinet - everything was used. Today, this method is no longer relevant (to be honest, even in those days, filling with an alcohol solvent “revitalized” felt-tip pens for a very short time) for a simple reason: the sets of felt-tip pens produced in our time have water as a solvent, they are called “water-based felt-tip pens.” basis."
Of course, you can fill water-based ink with an alcohol-containing substance, which will also soak the dye, but, alas, not for long. Don’t forget about such an important aspect as the specific smell that your markers will acquire after filling with alcohol or even perfume.
On thematic forums you can find a recipe for a dressing that will make the marker eternal. According to it, you need to mix 0.5-1.0 ml of alcohol (preferably isoamyl or isobutyl) with an alcohol-soluble dye of the required color (sudan black, brilliant green, auramine, etc.) and use a syringe to inject the solution into the end of the marker. Perhaps this method is indeed effective, but not everyone will be able to find all the ingredients necessary for it.
Restoring permanent markers
How to refill permanent marker? It all depends on what solvent was used in its manufacture. Modern manufacturers add isopropyl alcohol or acetone inside the rod. Therefore, you can use alcohol or nail polish remover as a dressing. Water is not suitable for restoring permanent markers. You only need 1 ml of the substance, which is injected into the marker using a syringe through the tip.
To find out which liquid solvent is used for the ink of your art accessories, you need to study the information on the packaging.
Production technology
Let's try to figure out how markers are made. Manufacturing involves making all the components and assembling them into a single whole, but first things first.
The basis for the production of felt-tip pens is plastic housings. They and the caps are made in the following way: a scattering of white plastic granules and dye are mixed and poured into a cauldron, in which they turn into a hot viscous mixture. It is poured into a mold and plastic tubes are made by pressing, which will serve as the body. You can read more about how plastics are made and the method of pressing them.
The ink reservoir is a bundle of hundreds of thousands of very fine nylon fibers, which are twisted very tightly on a special machine. After which they are wrapped in cellophane wrapper, resulting in a long sausage, which is cut into containers to the size of a felt-tip pen.
For felt-tip pen ink, concentrated dye is diluted in water with a hygroscopic substance that prevents drying.
The rod, as a rule, is made of nylon or felt, because only these materials are able, on the one hand, to prevent the felt-tip pen ink from leaking out, and, on the other hand, to allow a sufficient amount of it to pass through.
What if the marker is dry?
What to do. First, understand the composition of the writing medium. For example, I stopped writing with a water-based felt-tip pen.
Most often this happens because the water that allows the dye to drain has run out or dried out. In this case, there are several ways to restore the felt-tip pen and give it a second life:
- If the design of the felt-tip pen is such that it can be easily disassembled, then it is necessary to completely remove the rod and place it in a bowl of warm or even hot water. This is necessary so that the rod is completely saturated and the remaining dye is evenly distributed inside.
- If a non-separable felt-tip pen has dried up, you can try to revive it by dipping only the tip into hot water and leaving it there for a while. In addition, you can simultaneously try to introduce water into the rod and on the other side of the felt-tip pen. This can be done using a syringe. When pouring water into the syringe, do not overdo it, as you can completely wash the dye out of the felt-tip pen.
- Another interesting and effective way to restore a water-based marker is to wet the tip with vinegar. To do this, you can apply a few drops using a pipette or the same syringe.
Unfortunately, all of the above methods will not help if the dye runs out in the rod. By the way, with intensive refueling or a large amount of water poured, you may accidentally wash it yourself.
We prepare a special dressing from simple ingredients
There are two ways to prepare a special dressing. So, what to refill the marker with?
For the first option, you will need: water, gouache, ink, powder, PVA glue, two tablespoons of sugar and a half-liter container.
First you need to fill the vessel one third with water. Next, gouache and powder are added to the water. Beat thoroughly and slowly add mascara. To prevent the dressing from turning out too black, it is important not to overdo it. After this, you need to add 20 drops of glue to the mixture and mix the mass thoroughly again. Sugar is added to achieve homogeneity. The mixture is whipped again - the dressing is ready!
For the second method you will need: two containers, a ballpoint and gel pen, a touch-corrector, nail polish, acetone, hairspray, brilliant green.
First you need to pour the bar corrector into one container and then let it dry. Grind the dried mass into powder and pour into another container. Ink from a ballpoint pen and ink of the desired color from a gel pen are also added there.
Add brilliant green and nail polish of a suitable color to the resulting mass. All this is fixed with hairspray and mixed thoroughly. Next you need to add nail polish remover or acetone. That's all. The gas station is ready!
The important thing is that these refills are moisture resistant.
Determining the required ink volume:
If you are still faced with the need to refill a marker, then first of all find out how much ink the marker can hold. This value may vary for each brand of art markers. Also pay attention to ink bottles; most of them have special measuring divisions that you should use when filling markers.
Copic Marker Capacity:
Copic Ciao - 1-1.5 cc. cm
Copic Sketch - 2 cu. cm
Copic Classic - 2-3 cu. cm
Copic Wide - 3-4 cu. cm
What to do?
- First way. Pour alcohol into a marker cap or another small container and place the marker there. Leave it there for a while until it collects the required amount of liquid.
- Second way. Carefully drill or pierce a hole with a hot nail, through which pour a few drops of alcohol with a syringe. Then solder it or install a removable plug.
Attention! When using this method, do not use hot objects, as highly flammable alcohol vapors may collect under the lid. Simply heat a nail or any other sharp object slightly.
We restore water-based markers
How to refill water-based markers? To restore them, you must perform the following steps:
- You need to pour 250 ml of warm or hot water into a bowl. Cold water will also work, but the recovery process will not be as fast.
- Next, the markers are placed in the water with the tips down. You must first remove the caps. The tips should be completely submerged in water and remain there for 5 minutes.
- After this, the accessories are laid out on a piece of cloth for 24 hours to dry. In this case, the ends must be wiped to remove excess water. Do not allow it to dry out, otherwise the marker will stop writing.
- Once the process is complete, the caps are put back on.
You can also moisten the writing part of the marker with a few drops of clear white vinegar. Follow all the steps described above and apply a couple of drops of the substance to the tip.
You can also inject water into the writing instrument shaft using a syringe. In this case, the needle is inserted through the tip and enters the body. You will need a small amount of water (1 ml), which must be administered slowly. Next, the felt-tip pen is dried on a piece of cloth.
How to refill a marker or Two simple ways to restore an old, dried out marker
How to refill a marker or Two simple ways to restore an old, dried out marker.
Any craftsman uses a felt-tip pen, but not everyone knows that the name of this tool comes from the name of the company of the same name, Flo-Master, which first launched such a product on the market. Since that time, people have had a new problem: “How to refill a marker, how to restore a dry one?”
As far as I remember from my childhood, previously almost any felt-tip pen (marker) could be opened, refilled and used without much effort. It even seems to me that the first “eternal brushes” were made for reusable use.
But now manufacturers are apparently overcome by greed and they tightly seal the body of the felt-tip pen and force us to become more sophisticated and invent different ways of restoration and refueling.
I will describe the two methods that I use, and you choose which one suits you best in your case.
So, method One (urgent and reliable).
If this cannot be done, then we drill a hole in the rear plug of the marker that we are going to restore. I do not recommend burning, as there may be flammable vapors of alcohol (solvent) there.
- Then, using a regular syringe with a needle, we take a little alcohol (cologne, perfume or any liquid containing alcohol), insert the needle in through the hole and release it little by little.
How to open a marker cap?
Wear clothes that you don't mind getting ruined, place a newspaper on the table so as not to stain it with dye, then carefully, so as not to hurt your fingers, pry the cap with a sharp knife to move it slightly. Once the cap gives way, pull it out using pliers.
Interesting materials:
What is the highest temperature ever recorded in Africa? What kind of folding do the Sayans have? What kind of folding does the Eastern Sayan have? What speed should be on the bridge? What is the speed of a soccer ball? What internet speed is needed for Microsoft Teams? What Internet speed is needed for a smart set-top box? What speed is needed for video communication? What is the speed of the lioness? Which dog stars in the TV series Dog 4?
marker paint writes, for example, white on any surface, concrete, polyethylene, what to refill with
How to refill the marker? We prepare the dressing at home. Is your marker running out of gas? Let's start with the fact that you cannot refill the marker. The first is paint mixed with all kinds of solvents. Since the body of the markers is plastic, solvent can corrode it. Second, the marker cannot be filled with very thick paint, as it may not pass through the marker rod. And don't try to freshen the paint with alcohol. But this does not mean that you need to buy a new marker. Let's prepare a marker dressing with our own hands. And believe me, the quality will be no worse than the factory one. We present several ways to prepare dressing at home.
First method We will need:
◦PVA glue; ◦gouache; ◦water; ◦ mascara; ◦powder; ◦capacity 0.5 l ◦sugar 2 tbsp. l. 1.Pour 1/3 of water into the container. Take gouache of any color and pour it into water. Next add powder. Beat the resulting mixture thoroughly. 2. We begin to slowly add mascara and the main thing here is not to overdo it, otherwise our dressing may turn out very black. 3.Next, add 20 drops of glue to the mixture and mix thoroughly again until foam appears. In order for the dressing to be homogeneous, you need to add sugar. 4.Beat the mixture. The gas station is ready. Second method We will need:
◦2 containers; ◦stroke corrector; ◦ballpoint pen; ◦colored gel pen; ◦ brilliant green or caller (sold in hardware stores); ◦ nail polish; ◦hairspray; ◦acetone or nail polish remover. 1.Pour the barcode corrector into the container. Let it dry. 2. Take the dried corrector out of the jar and grind it into powder. And pour it into the second container. Squeeze ink from a ballpoint pen into the same container, and squeeze ink from a gel pen into the same container of the desired color. 3. Pour brilliant green and nail polish of the corresponding color into the resulting mixture. We fix all this with hairspray. 4.Mixing the mixture thoroughly, add acetone or nail polish remover. The gas station is ready. Let us note an important fact. These refills are moisture resistant.
Source
Ready solution
If you do not dare to experiment, but at the same time do not want to buy new art supplies and are still wondering what to refill the marker with, we suggest you use a ready-made solution. The fact is that many manufacturers sell ready-made refills for markers. They are special inks of different shades and are supplied in convenient jars with a spout, and are also additionally equipped with a dispenser for more accurate measurement of the substance. This is a great solution for refillable markers.
how to restore (charge) a dry felt-tip pen
Or you can pour alcohol into some kind of cap or cork and place a marker in it with the tip down. Then the alcohol will be absorbed into the marker itself and you won’t have to drill it. You will need to wear gloves and protect your work area with an old rag while using this method. You need to dry the markers so that the ink on the tips is no longer watered down, but not so much that you stop writing. This may take up to 24 hours. To check the writing ability of a marker, it is best to test them on a piece of paper every few hours.
As a last resort, try buying ink. While the above methods are effective, they will only work if there is some ink left inside the marker. For erasable markers that are completely dry, meaning both the tip and the inside of the marker are dry, you may need to purchase ink.
Source: callbollonez.ru
Varieties
Felt pens are made from water or alcohol. There are not only felt-tip pens for drawing on paper, but also on metal, concrete, leather, glass, rubber and other various surfaces. In addition, they are collapsible and non-dismountable. Also, on some felt-tip pens and markers, the manufacturer indicates that they are strictly prohibited from being disassembled or refilled. Let's take a closer look at all these nuances.
How to refill a set of water-based markers: a miracle product at hand!
Answer to the question: “What to refill water-based markers with?” lies in the question itself. Since water acts as a solvent, it means that dried paint can be “reanimated” with ordinary water. This is done in several ways.
Using water, you can return the ink to its original brightness.
- You can fill the felt rod, which is the dye reservoir, using a regular syringe filled with water. Having removed the cap from the end of the body, you should carefully introduce water into the center of the rod, preferably gradually, 10-15 drops at a time.
Drip method for refilling markers
This is the most common way to refill most brands of drawing markers. Use the thin spout of the ink bottle to extract drops.
It is most convenient to start filling using the drip method from the side of the wide tip. When refilling the marker, make sure that all drops of ink fall on the marker pen itself. With this refilling method, you can also lean the narrow “nose” of the ink bottle close to the marker nib and carefully fill it. On average, about 20-30 drops are needed to refill one marker.
Attention! Wait until the drop is completely absorbed into the marker pen before applying another one.
The drip method of refilling markers for drawing takes quite a lot of time, but on the other hand, the risk of ink leaking or damaging the marker pen is minimal.
