“Silit Beng” for plaque and rust... Today you can hear a wide variety of reviews about this product. Most often - positive. Of course, this product perfectly removes stubborn dirt, soap stains, and hard salts.
“Silit Beng” against plaque and rust collects positive reviews for a reason. The product has many advantages. It is suitable for a wide variety of materials and surfaces - for bathtubs, showers, tiles, window sills, etc. The most important thing is not to use the product on wooden, damaged or hot surfaces. The required amount is applied to contaminated areas, previously moistened with water. “Silit” remains on the surface for about five minutes, after which it is wiped with a sponge and rinsed with water. If necessary, the procedure is repeated. The product contains linalool, fragrance, and anionic surfactants. Before use, try it on a not too noticeable area.
Rating of anti-limescale products
Manufacturers of household products offer a variety of gels and powders that prevent the appearance of crusts. But not all of them are safe for coating and human health. The editors of the publication VyborExpert.ru talked with manufacturers of bathroom and kitchen accessories, plumbers and housewives to compile a review of useful products. The following selection criteria were taken:
- Application area;
- Compound;
- Exposure time;
- Consistency;
- Price.
How are stains removed?
How does Silit Beng work against plaque and rust? Reviews say that the product removes lime very effectively, eating into its structure from the inside. At the same time, it is converted into a soluble form. Buyers note the fact that Silit Beng has one small drawback - it does not contain abrasives. However, this problem can be easily eliminated by using a stiff bristled sponge or adding baking soda to the stain.
As mentioned above, the product can perfectly break down soft carbon deposits. The detergent components included in Silit Beng help loosen the structure of the stain and make cleaning easier. That is, the longer the product is in contact with the dirt, the easier it will be to wipe it off. The absence of abrasives requires high-quality mechanical cleaning, which depends on the choice of sponge. It's best to stick with a hard-coated sponge, unless you're afraid of scratches, of course.
For hard carbon deposits, the product does not pose any danger. The drug is not introduced into its structure during the cleaning process, even if you soak the stain for a long time.
Silit Beng also removes rust. True, “fresh” is best. Old rust will have to be soaked and rubbed harder when cleaning. The most important thing is that the product does not scratch the surface when applied. And this distinguishes it favorably from all kinds of liquid and powder abrasive cleaning products.
What to look for when purchasing
Most Russian residents use hard water. It not only leaves a hard crust on the coating, but can also reduce the service life of the plumbing fixtures. Housewives are thinking about how to clean the bathtub from limescale without harming the coating. When choosing a product, you should rely on certain criteria.
Surface type
It is written on the label. Most of the products are universal. Suitable for all common coatings. However, household products cannot solve all problems. For example, they do not get rid of rust. And more aggressive products can disturb the glossy layer of the bathroom or faience. Consultants at plumbing stores advise choosing a cleaning product directly to match the type of surface. And here are the active substances you should look for in a gel or spray to best deal with the hard crust that has formed:
- For enamel coatings, products based on citric or oxalic acid are considered harmless. They break down the keratinized crust of stone and salt and will not spoil the appearance of the item. To work, you will need a soft sponge or rag. Hard brushes are prohibited. They will leave scratches;
- Acrylic interior items need to be cleaned using liquids based on natural acids, such as malic acid. The concentrate does not spare contamination, but delicately protects the material itself. Chlorine is contraindicated;
- Stainless steel elements require maintenance. Stains easily remain on them and a stone crust forms. Sprays and gels with alkali can defeat it. They instantly dissolve stone deposits and add shine to the metal;
- Chrome taps and interior elements are extremely sensitive to impacts. Wet cleaning should be as gentle as possible. Cleaning products may contain a small percentage of alkaline. The foam is washed off with a delicate cloth;
- Ceramics and porcelain can be washed with acidic solutions. They protect the shiny layer from damage and eliminate old stains.
Compound
It is diverse. Some manufacturers specialize only in natural ingredients. They carefully clean the surface without damaging it. They do not cause allergic reactions and do not have a strong odor. The packaging can be biodegradable. Such sprays and gels, as a rule, belong to the premium segment and are more expensive.
Artificial ingredients cope with a large number of stains and dirt, but they are also more aggressive. Not suitable for all surfaces. Kills bacteria and harmful microorganisms.
And here are the components most often used to clean plaque.
Substance | Properties |
Natural acids | They break down hard plaque and form a crust that prevents the formation of plaque. |
Artificial acids | Dissolves plaque and gets rid of rust |
Alkali | Delicately copes with long-term deposits and adds shine to products |
Chlorine | Whitens the surface. Kills bacteria |
Efficiency
It will completely depend on the content of active components. Some buyers try to prevent the aging of plumbing fixtures and use special products in advance that prevent the formation of stone build-ups. Such products contain mild active ingredients. They envelop the glossy layer and protect it from damage. Such liquids will not be able to cope with long-standing problems.
If the spots have been around for more than one month, they need a more concentrated composition that penetrates deep into the cells and breaks them down without leaving a trace. Such gels are more aggressive, but also work more efficiently.
Safety
Dermatologists advise working with thick gloves with any cleaning product. The ingredients can break down the protective layer of the epidermis, exposing sensitive tissue to bacteria. Some substances cause redness and even burns. With prolonged use, an allergy may develop.
Pulmonologists also recommend protecting the respiratory tract with masks and respirators. Some chemical elements, in particular chlorine, emit vapors that, if inhaled, can damage the mucous layers of the dermis. If the product gets into your eyes, doctors advise immediately rinsing them with plenty of cool water, and if the condition worsens, seek medical help.
Description and recommendations for use
Each product from the Cillit Bang line has its own purpose and requires compliance with certain instructions.
How to clean polyurethane foam from clothes and various hard surfaces? We have the answer!
Read about what you can use to clean silver at home and how to do it at this address.
Cillit Bang against plaque and rust
Eliminates limescale and rusty marks without leaving streaks behind. Apply the composition directly to the stained area or with a sponge. Wipe the surface and rinse with clean water after 2-5 minutes.
READ ALSO: Current and objective news from Ukraine
Anti-plaque + Shine
Helps cope with soap stains, rust, and plaque within a few seconds. Used for ceramics, stainless steel, chrome surfaces. Do not apply to marble, brass, copper, aluminum, rubber, wood. The bottle has a trigger sprayer, which allows you to save product consumption during application.
Instructions for use:
- turn the sprayer to the “on” position;
- try the product on an inconspicuous area;
- apply to dirty surfaces;
- do not use for more than 5 minutes;
- rinse with water.
A bottle will cost an average of 300 rubles.
Active bath foam
Innovation for quick cleaning of surfaces. Thanks to the sprayer, you can perfectly cover contaminated areas with just one application. The foam penetrates and dissolves dirt, leaving behind a radiant shine. Ideally cleans shower stalls, ceramic tiles, acrylic bathtubs, chrome and steel surfaces.
READ ALSO: Properties and uses of oxalic acid in everyday life to remove rust and soften water
Before and during use, the bottle of active foam should be shaken well. Hold vertically and spray the product at a distance of 30-40 cm from the surface. Let the foam work for 2 minutes. If the dirt is deeply ingrained, it may take up to 10 minutes. Rinse off the foam with clean water and wipe the surface with a clean cloth.
New Silit Beng for the bathroom antibacterial active foam is an innovative product that not only cleans the surface of dirt, but also destroys up to 99% of bacteria and fungi (Staphylococcus aureus, E. coli, Salmonella, Candida, Pseudomonas aeruginosa). To achieve a fungicidal effect, the foam must be applied for 15 minutes, and a bactericidal effect - for 5 minutes. The cost of active foam is 290-330 rubles.
How and with what to clean the window sill of a plastic window from stubborn stains and dirt? We have the answer!
The rules and features of caring for flowering hanging indoor plants are described in this article.
On the page, read about how to choose a vertical clothes steamer and how to use it.
Black mold remedy
The Cillit Bang formula with chlorine helps to effectively destroy fungi and mold. A special sprayer provides wide coverage of affected surfaces, penetrating into hard-to-reach places.
Hold the bottle vertically at a distance of 10-15 cm from the surface. Spray Silit Beng against black mold and leave for 15 minutes. Wipe the surface with a clean sponge and rinse with water. The product must not be used simultaneously with other substances containing chlorine and its derivatives. Also not recommended for use on surfaces sensitive to acids.
READ ALSO: Turnkey finishing of the loggia
The price of a 750 ml bottle is about 340 rubles
Sillit Beng anti-fat
Copes with old traces of grease on dishes and kitchen surfaces, and oil stains. This product can also be used to remove dirt from surfaces made of natural stone and marble. Do not use the composition on wooden surfaces, and do not apply it to hot objects. You need to let them cool.
Turn the sprayer to the ON position. Test the effect of the product on an inconspicuous area. Apply the required amount to contaminated areas. Keep the bottle vertically at a distance of 20 cm. Leave for the composition to take effect and dissolve the fat for no more than half an hour. Wipe with water. Avoid getting Cillit Bang in your eyes. If accidentally swallowed, seek immediate medical attention. The price of a 750 ml bottle is about 300 rubles.
VyborExperta.ru recommends
To choose a working and effective means for cleaning plumbing fixtures and tiles, it is worth considering the opinions of experts. The team of the publication VyborExpert compared popular products, studied customer reviews, and talked with doctors to present a rating of anti-limescale products:
- Unicum - contains a complex of natural acids. They fight various deposits and kill bacteria. Disinfect the surface, maintaining its integrity;
- Bagi shumanit - removes stone crust and scale from electrical appliances, washing machines and dishwashers. The main ingredients are organic acids. Do not damage rubber parts;
- Grass gloss - returns whiteness to earthenware. Kills pathogens and mold spores. Begins to act 20-30 seconds after application;
- Hg - suitable for cleaning tiles, glass, pipes and chrome taps. Does not spoil the glossy layer. The concentrated acid composition removes soap stains and perennial growths;
- Frosch - free of formaldehyde and phosphates. Contains milk and plant concentrates that fight stone formation. Does not cause irritation or allergic reactions upon contact with skin.
Household chemicals combat a complex of problems: they prevent the development of pathogenic colonies of microbes and mold fungi. Old stains and soap stains are removed without harming the glossy surface. With regular use, they completely get rid of unsightly crusts.
"Silit Beng" for plaque and rust: customer reviews
What else does the consumer need to know? “Silit Beng” against plaque and rust collects positive reviews even when people want to get rid of soft carbon deposits and greasy stains. According to buyers, the product is practically powerless against tough stains. However, it does not scratch the surface at all, which is very important, for example, for an enamel sink. Another advantage of the cleaning product is its convenient dosage. In a word, the advantages win.