Simple and clear instructions for use with a Tefal steam generator in Russian

The Tefal steam generator is a household appliance that consists of a tank with a heating element, in which hot steam is created with a pressure above atmospheric, and an iron with holes in the sole.

The device is used for ironing and shaping fabric products through vertical or horizontal steaming.

This article provides instructions for using the Tefal steam generator in Russian.

Usage

To ensure fire safety, the TEFAL Turbo Pro Anti-Calc FV564 iron has an auto shut-off function.
It turns off the heating if the iron is stationary in a horizontal position for 30 seconds or in a vertical position for 8 minutes. The ''drip-stop'' function is used to prevent water from leaking from the holes in the soleplate of the iron.

While ironing at maximum temperature, a small amount of water leakage was noticed. At a lower ironing temperature, no water leakage occurred.

When dry ironing, there was no water leakage.

The iron can be used for vertical steaming of items. To do this, you need to turn off the automatic steam supply by moving the steam supply regulator to the right position, and set the thermostat indicator to the maximum position. Steam will be supplied in a vertical position by pressing the trigger located under the handle. When using automatic steam, a small amount of water may leak during vertical steaming.

Self-cleaning function

The self-cleaning function is designed to wash the steam chamber and steam supply holes from various scale deposits formed during the operation of the iron.

To do this, you need to fill the water tank to the maximum level, set the thermostat indicator to the maximum position, and set the steam control to dry ironing mode and turn on the iron. After heating the iron, you need to unplug it, hold it in a horizontal position over the bathtub or sink for a while, and then remove the anti-scale valve. After the water exits through the steam holes, it is necessary to install the anti-scale valve in place.

The manufacturer claims a steam boost of up to 210 g/min. Unfortunately, there is no way to quantify this indicator. Having used this function in practice, I can conclude that this statement is close to the truth. Thick and voluminous steam emanates from all openings.

Five items were taken as ironing samples:

• linen scarf;
• shirt containing 80% viscose and 20% cotton;
• cotton shirt;
• robe containing 60% cotton and 40% polyester.

Automatic steam supply allows you to smooth out the most difficult wrinkles. Ironing the fabric near the buttons was also no problem.

We invite you to read: How to choose a wig? How to care for your wig? Wig styling

You can see the ironing results below.

Almost throughout the entire territory of Russia there is increased water hardness. In addition, tap water is saturated with sodium and fluoride. Using such water to fill the iron's container increases scale and limestone deposits inside the appliance.

Therefore, the self-cleaning function should be performed as often as possible. Irregular or occasional cleaning leads to the formation of a dense layer of scale on the internal parts of the appliance sole. Then the self clean function on the iron becomes useless.

Tefal fasteo sv6040e0

without a boiler tefal fasteo sv6040e0 will provide high-quality and careful care of things Reviews about it are only positive. To smooth out hard-to-reach areas, the model had a specially shaped nose.

Fasteo sv6040e0 has a Smart technology that helps you quickly select the appropriate mode for a specific fabric.

Characteristic

Advantages

• Availability of energy saving mode
• A light weight

Flaws

• No

I liked using the device. Despite the fact that the device is compact, it produces a large amount of steam. I'm pleased with the large water tank. There is no need to constantly add water. I pour it once every 30 minutes and during this time I have time to iron the curtains and washed clothes, of which there is quite a lot. An ordinary iron is forgotten forever, and I don’t want to return to it. I recommend this model to everyone, excellent price-quality ratio.

Tefal fasteo sv6040e0

Chemical descaling agents

If traditional methods of dealing with scale do not help, you have to use chemical anti-scale cleaners. They are easy to buy and easy to use. But after use, you need to thoroughly rinse all contact parts. They also clean a steam generator equipped with a filter system.

Cleaning pencil

Often the result of an incorrectly selected temperature setting is dark marks on the soleplate of the iron. These are melted particles of fabric. They stick tightly to the sole. They should not be removed with a knife or other sharp objects, as this will cause scratches.

A special pencil for cleaning the sole will help get rid of carbon deposits. Prepare unnecessary fabric or other material onto which the remaining pencil will flow. Preheat the device to maximum temperature. Open a window or take the iron outside to avoid inhaling the unpleasant, pungent odor. Rub the heated surface with a pencil. After it starts to melt, wipe it with a rag. Repeat the procedure until the sole is clean.

Top House

Dilute the product with water in a ratio of 1:2. Pour into a container and heat the iron. Install horizontally and switch to steam generation mode.

Antiscale or analogue

Anti-scale is the most popular and well-known means for cleaning a Tefal iron. It breaks down salts and minerals, softening them. After this it will be easy to remove them. Use antiscale in the form of an aqueous solution, following the instructions. Pour the resulting composition into a water container and plug in the device. After half an hour, when the iron has cooled down, clean the liquid along with the scale particles. They wash it several times, wipe the tank and put it back in place.

Before using the iron after cleaning, you need to perform a test ironing. Heat the iron and run it over a piece of waste white cotton fabric. They look to see if there are any streaks or stains on it.

Cillit Bang

The product is poured into the holes on the sole using a pipette or syringe. Leave for 10 minutes. Then add water in the same way. Repeat washing until there are no streaks on the test fabric.

Topper

To clean the inside of scale, use a concentrated solution of the product. Therefore, it is better to wear protective gloves before starting work. Add 1 part water to 2 parts of the drug. Pour into the water tank and place the iron vertically. They plug in and wait. Until he switches off. Then set horizontally for 2 hours. You can put a piece of cotton fabric under the sole.

Plug the iron back in, heat it up and press the steam button. If pieces of scale come out along with it, repeat the procedure several times. After the container is cleaned, you can use the Tefal iron for its intended purpose.

other methods

There are many other products available to descale the water tank, steam generator and iron soleplate. Before use, carefully read the instructions for use. This will help preserve the iron and not harm yourself.

Toothpaste will help clean your soles. Perform the procedure in the same way as cleaning with a pencil. Laundry soap is also used for cleaning.

FAQ: answers to frequently asked questions

Which is better, an iron or a steam generator?

If you have a large family and therefore a lot of ironing, a steam generator will make your job much easier.

How to descale a Tefal steam generator?

This is not necessary, but if desired, rinse the soleplate every 10 uses without using detergent or vinegar (this will ruin the device).

The steam generator is leaking.

It is necessary to select the type of fabric and set the temperature control and, in addition, turn on the steam function. This will help get rid of the leakage problem.

The steam generator has stopped producing steam, how to fix it?

Perhaps the valve in the iron does not work, which is due to a break in the wires in the iron sleeve. The device needs to be sent in for repair.

Before starting the procedure

Before starting the process, it is necessary to assemble the unit as described in the instructions. Water is poured into a special water container, but it should not be hot. You can have it cold, you can have it warm, but not hot!

Once your Home Assistant is turned on, an indicator light will indicate this. Often, complete readiness for steaming is achieved after a couple of minutes. The iron must be held so that it is facing away from you.

This is very important, because if you use it incorrectly, you can harm yourself: the device emits hot steam that can cause thermal burns

Before steaming clothes, you need to press the button that is responsible for the steam supply and see how powerful the jet is. If you have picked up the device for the first time and do not yet know how to use it, it is best to test it on old clothes.

Don't forget about environmental protection

Page 10

• Image
• Text

131

Malfunctions

Probable Causes

Trouble-shooting

The sole is dirty or brown and may stain laundry.

You are setting the temperature too high.

Refer to our temperature adjustment guidelines.

You haven't rinsed your laundry enough or you're ironing new clothes before washing them.

Make sure you rinse thoroughly to remove any soap or chemical residue from your new clothes.

You are using starch.

Always spray starch onto the back of the fabric you are ironing.

Insufficient or no steam supply.

There is no water in the steam heater.

Fill the steam heater with water.

The steam heater is not yet ready.

After turning on, wait 8 minutes or until the steam ready light comes on (depending on model).

The temperature of the iron soleplate has reached its maximum temperature.

The steam generator works, but the steam is too hot and dry, and as a result, less visible.

The plug allows steam to pass through.

The plug is not tightened properly.

Tighten the plug more tightly.

The plug seal is damaged.

Do not use the steam generator again and contact an authorized Service Center.

The device is faulty.

Do not use the steam generator again and contact an authorized Service Center.

The red “Water tank empty” indicator lights up.

You did not press the “Restart” button to turn it on again.

To turn it on again, press the “Restart” button located on the control panel.

Steam comes out from the bottom of the appliance.

The device is damaged.

Do not use the steam generator again and contact an authorized service center.

If it is impossible to determine the cause of the malfunction, contact an authorized service center.

Don't forget about protecting the environment!

In the manufacture of the device, various valuable and recyclable materials were used.

recycling materials.

At the end of their expiration date, send them to a recycling collection point or at least to

appropriate service center that will ensure their correct processing.

Notice Tefal 21L - 1800111437 30/01/08 15:18 Page 131

Comments

Select → I found the instructions for my iron here! #manualza

• Click →

An American company bought an airplane from the Soviet Union. This plane was neatly packed in boxes, all that remained was to assemble it. When the plane was assembled in the USA, it turned out to be a steamship. Everyone was very surprised, they dismantled the structure, reassembled it and again, instead of an airplane, a steamship. There was nothing to do, they called a representative from the Soviet Union. He came and assembled the plane for them. Americans ask: “How did you do it?” — Here in the instructions in Russian it is written: “After assembly, process with a file!”

Manualza!manualza.ru

Still not with us?

Instructions: how to use a Tefal steam generator correctly?

After purchasing a steam generator, people have a question about how to use the equipment. The device comes with instructions for use, which clearly outline the rules for using the steam generator.

The work process includes several stages:

• First of all, water is poured into the tank and the heating is turned on.
• Next, the operating mode and temperature for a specific material are selected.
• The last stage is ironing itself.

If the iron is left idle for 10 minutes, it will begin to cool down and the standby mode will automatically turn on. This is done to avoid fire.

How else can you use the device?

Hot steam destroys up to 70% of bacteria and allergens without the use of chemicals or sanitary products.

Steam generators can be used to clean carpets and large upholstered furniture from stains.

It is recommended to pre-treat stubborn stains with a cleaning agent, wait for the time specified in the instructions and treat with a steam generator. After each steam treatment, the stain should be wiped with a microfiber cloth.

Hot steam effectively cleans shiny stains, straightens creases on curtains, covers, frills and other decorative elements, refreshes and restores an attractive appearance.

Steam cleaning should not be used to remove protein stains.

Exposure to steam can restore shiny lint on suede shoes or jackets. After treatment with a steam generator, children's toys will not only be disinfected, but will also look like new.

House flowers enliven the interior, but a lot of dust collects on the plants, which is not easy to remove. Treating plants with dry steam effectively solves this problem.

The steam is directed from a distance of 50-50 cm and, thanks to the low humidity, cools quickly, so it does not burn the leaves. The flow power remains strong enough to knock dust off the leaves.

Self Clean function

The automatic system is activated by pressing the Self Clean button on the iron. The filter is located between the water container and the pump and traps the smallest particles of contaminants, collecting them in a special container.

How to use Self Clean

To achieve the best result, follow the simple instructions, following the sequence of actions:

Buy distilled water

Do not use cleaning products! It is important to fill the water container 100% completely. We connect the iron to the outlet and set the maximum temperature. After complete warming up (the indicator light turns off), unplug it from the outlet and place it over the sink or bathtub with the sole down. We press and hold the corresponding button, which activates the self-cleaning system. Dirt, scale and rust will leak out of the holes. During the process, a short-term stream of steam may escape - this is normal. Shake the device periodically to improve cleaning efficiency. Wait until the water has completely drained out and consider the procedure complete. If there is a lot of dirt and the water flows out dark or with a lot of impurities, we recommend repeating all cleaning steps. At the end of the process, rinse the device under running water and dry.

After cleaning, it is recommended to carry out a test ironing - heat the iron and iron it with a soft cloth - it is possible that residual dirt will come out. Rinse the filter periodically: remove it and soak it for 30 minutes in a solution of citric acid or vinegar. Do not forget to rinse the filter under running water after soaking.

Preventing limescale

To avoid failure of a Tefal steam cleaner or iron with a steam function, you need to pay some attention to following the rules of its operation. Ordinary tap water is absolutely not suitable for these purposes - it must first be softened with a special product for irons

Ordinary tap water is absolutely not suitable for these purposes - it must first be softened with a special product for irons.

This approach will avoid annoying breakdowns and will be the best measure to prevent scale formation. In addition, you must follow the recommended schedule for cleaning the tank from contamination. Then the risks of device breakdown will be minimal.

To learn how to get rid of scale, watch the video.

What kind of water to pour into the steam generator

Modern appliances are designed to use tap water. If the liquid is of low quality, with a high content of impurities, manufacturers advise replacing it with demineralized or distilled one. It is allowed to use a mixture of tap water and distillate in a 50/50 ratio.

It is not recommended to pour settled, boiled, melted or well water. The use of special perfumed water for irons is allowed. However, due to the high fluid consumption, its use may not be economically feasible.

Ironing process

Procedure:

1. Fill the reservoir with distilled or filtered water. If you use a regular one, plaque will form on the steam holes over time.
2. Select the desired operating mode for the iron, place the device on a stand or place it vertically to heat it up. The instructions for using the iron will help you select the desired temperature conditions if there is no special scale on the device body.
3. Place the item on the ironing board, carefully straighten it so that there are no folds or creases.
4. Run the iron heated to the desired temperature along the item (if you iron it across, the fabric will stretch or become deformed). Swipe over the entire surface of the product, without staying in one place for long. To remove wrinkles, use the steam setting.
5. After one side of the item has been processed, turn the item over and iron it again.
6. When finished, hang the clothes on hangers and move on to the next one. While you work, the fabric will dry from the steam, and you can, if necessary, remove the item from the hanger and fold it to put it on the shelf.
7. After finishing ironing, turn off the iron. Only after it has completely cooled down, put it in your usual storage location.

Care Tips

During use, scale accumulates in the steam generator, which negatively affects the operation of the device.

If the water in your region has high hardness, then it is necessary to descale the device every 50 operating cycles , or preferably more often. This procedure extends the life of the device.

To reduce scale formation, fill the tank with boiling water or use demineralized water.

The scale collection tank can only be removed after it has completely cooled down . Otherwise you may get burned. It takes a long time to cool down - 3-4 hours.

Design and principle of operation

All steam generators on the market today have a similar design and differ in their basic technical characteristics and set of additional functions.

Depending on the steam supply speed, steam generators are:

1. Boiler rooms are the most popular type of steam devices.
2. Without a boiler - a device of low power and size.
3. Continuous water supply - The device contains two reservoirs to ensure a continuous supply of water and is mainly used in professional and industrial applications, such as car washes.

What does a steam generator consist of:

1. Boiler. Typically made of stainless steel or heat-resistant plastic, it consists of a water tank with a thermostat, a heating element and a fuse to protect against overheating.
2. Heat-resistant hose for supplying steam from the boiler to the iron.
3. An iron with holes in the soleplate to supply steam. The sole material of the iron can be made of different materials, for example steel or cermet.
4. Additional attachments for different functions.
5. Iron stand with control panel for switching between supply and steam temperature modes, as well as lights and indicators. Often contains a compartment for storing the power cord.

The operating principle of all devices is also approximately the same:

• in the boiler, water is heated until steam is formed;
• dry steam enters the iron through the hose;
• When you press a special button, steam comes out of the iron's holes under pressure, thereby smoothing the fabric.

Product comparison

By comparing the main characteristics, you will answer the question of how and which steam generator to choose. Below is a comparison of important criteria you need to know when purchasing a device.

Typical problems

Steam supply in Tefal brand irons is carried out using a special button that presses on the hollow tube. A certain force is transferred to the corresponding contact. Due to frequent pressure, the part splits and cannot be repaired. The situation can be corrected by using a heat-shrinkable hose, sold in an electronics store. It should be placed on a plastic tube and heated with a lighter. After restoration, the part can be installed in its place.

Another malfunction may occur due to damage to the power cord. In this case, it is necessary to check the fuses. One of them is located in the electrical plug

You also need to pay attention to the presence of carbon deposits on the contacts, abrasions, creases and other types of damage. Any of them may cause the iron to stop functioning properly and the cable will need to be replaced.

Before changing it, you need to inspect the junction of the cable with the plug and the comb in the back of the case under the cover.

Plaque that accumulates for a long time on individual internal parts of the iron can also damage it. To remove oxidation, you should use fine sandpaper, a brush, detergents with a low acid content, or ethyl alcohol. Since in most Tefal irons water and steam come directly onto live elements, the lack of proper care of the device and regular cleaning will lead to negative consequences.

If the temperature regulator does not work, carbon deposits may be the cause. To remove it, you need to disassemble the temperature sensor assembly and wipe the contacts with a suede cloth soaked in alcohol or citric acid. Hard skins and powdered cleaning agents cannot be used for this purpose. As a result of their use, scratches are formed, electric current surges become stronger, which provokes an increase in carbon deposits.

Inside the thermostat there is a bimetallic plate that is responsible for interrupting the electrical circuit. If it breaks, it cannot be repaired, you can only replace it with a new one.

You can make a broken rod yourself from scrap materials. But most often the entire temperature controller will need to be replaced.

How do you know when the steam generator is ready for use?

There is a small control panel on the back of the steam generator. There is only one big button - turning on the device. After turning on the station, the blue indicator on the iron will start flashing. When the blinking stops and the indicator on the iron body is constantly on, the steam station is ready for use.

Interesting materials:

How to clean silicone from a shower stall? How to remove silicone? How to remove superglue from plastic? How to remove superglue? How to remove wax from a candlestick? How to remove wax from a down jacket? How to remove wax? How to clean grease from a grill grate? How to clean the powder compartment in an Indesit washing machine? How to clean steam holes in an iron?

What to look for when choosing?

When buying a device, you need to consider many details

Below we will tell you what to look for when choosing a clothes steamer

1. Power. The more power a device has, the more energy it consumes. More powerful equipment can do the job faster and better.
2. Steam pressure is a very important function. The amount of steam produced by the device is directly related to pressure. For full operation, the equipment requires up to 7 bar of steam output.
3. Storage tank. If the volume of the container is small, then it is necessary to constantly fill it with water. This significantly slows down the ironing process.
4. The base of the steam generator is very important. Depending on the material of the sole, the quality of ironing changes. The aluminum sole has fast heat dissipation. To make such a sole stronger, manufacturers combine aluminum with other materials. For example, with stainless steel, which cools more slowly.
5. The advantage of any steam generator will be the presence in the device of additional functions and accessories that make fabric care easier.

Tefal fasteo sv6038e0

The Tefal sv6038e0 ironing system allows you to achieve incredible steaming results in a few seconds. The convenient and compact fasteo model gets the job done faster than its analogues thanks to its strong steam power .

descaling system ensures efficient ironing. For the sample, the manufacturer used a ceramic sole, ensuring the optimal temperature for all types of fabrics. Additionally, the steam generator included a vertical steaming function. It allows you to iron suits or curtains without using an ironing board.

Characteristics

Advantages

• Automatic temperature adjustment
• Availability of a boiler tank

Flaws

• Lack of anti-drip protection

Recently, my usual household iron broke down, and I decided to buy a steam generator. I spent a long time comparing features and prices. As a result, my friend recommended the fasteo sample sv6038e0. When I found out all its characteristics and how much the sample cost, I bought it without hesitation. This is the best steam generator, convenient, heats up quickly. I didn't find any shortcomings in him. I recommend to everyone.

Tefal fasteo sv6038e0

Additional functions

Vertical steaming allows you to smooth out curtains, clothes, wash windows or clean carpets without difficulty.

Spraying will allow you to moisten your clothes with steam during the eyes process.

Anti-drip device - will not allow drops of water to escape through the holes on the sole.

Dry ironing - this function is useful for those who like to iron with a regular iron, and if necessary, you can switch the steam generator to dry ironing.

Auto shut-off is an additional feature that will protect your home from fires. Basically, the device turns off 15 seconds after stopping operation.

Additional attachments such as carpet brush, ironing iron, stain remover attachment.

Tefal pro express care gv907

Tefal Pro Express is a powerful ironing device that does not leave stains or streaks. Such a device requires a special ironing board that can withstand the weight of the steam generator.

Tefal gv9070 has a double anti-scale system, and a built-in special collector prevents scale from getting on clothes. This system can significantly extend the life of the iron.

Characteristics

pros

• Removable tank
• Easy

Minuses

• Defects in plastic

The iron is lightweight. Due to the strong steam, it thoroughly smoothes out wrinkles and there is no need to press the device tightly against the clothes. For a long time I could not understand how the iron worked, but everything was clearly explained in the instructions.

Tefal pro express care gv907

Before work

It is not difficult to prepare the device for use. After completing simple manipulations, you can begin ironing and steaming things.

• Place the stand with the iron on a stable surface.
• Make sure that the connecting cords do not interfere with the work process.
• Disconnect the boiler and fill with water (not in all devices).
• Insert the container into place until it clicks (for generators with a removable tank).
• Turn on the steam generator.
• Select mode.

Separately, it is worth dwelling on the quality of the liquid being poured.

According to the instructions for steaming, the use of five types of solutions is allowed:

1. Regular water from the city water supply. One condition is that the content of calcium and magnesium cations should not exceed 6 degrees of hardness.
2. Liquid that has been purified through special filter devices.
3. Bottled water without mineral impurities.
4. A solution of purchased water plus hard tap liquid (1/1 ratio).
5. A mixture of distilled and ordinary water in equal parts.

1. Pure distillate.
2. Mixtures with detergent additives.
3. Liquid with high salt content.
4. Carbonated and mineral solutions.

The design of the device, as well as the markings of the control buttons, allow you to work with the steam generator without any problems.

If questions arise during operation, you can always read additional information in the instructions for the Tefal steam generator.

Safety precautions during operation

The service life and safety of the equipment depend on several conditions that must be met.

While working, adhere to the following rules:

1. Straighten the steam hose and electrical cable. Twisting of elements is not allowed, as there is a risk of overheating of the device and short circuit.
2. When working with the iron, the connecting cables should not stick to the furniture.
3. The first heating is accompanied by the release of a specific odor. This is due to the initial heating of the steam generator thermoelements. The smell disappears with constant use.
4. The installation location is a durable, heat-resistant surface that prevents the iron from tipping over.
5. Do not place the device holder and iron on the fabric part of the ironing board.
6. The horizontal steaming structure must be stable, with a wide base and working surface.

During active operation, it is necessary to carefully monitor the stable operation of the equipment.

If unusual noises or fluid leaks occur, the unit should be turned off. After cooling, check the integrity of all components and connections.

Preventing limescale

Compliance with operating rules allows you to extend the service life of the device and prevent a decrease in operating efficiency. To prevent the formation of limescale and premature failure of the steam generator, the following recommendations must be observed:

1. Use only distilled or filtered liquid. It is strictly forbidden to pour ordinary tap water into the tank, even boiled or settled water. Some manufacturers claim that even the use of distilled liquid does not guarantee the absence of salt deposits. It is best to use special demineralized water. For Tefal steam generators, it is recommended to purchase a special water filter or hardness neutralizer.
2. After each steam treatment and use of the device, the remaining liquid must be drained. This approach allows you to prevent the appearance of not only scale, but also limescale.
3. Some models of Tefal steam generators have a special function that warns of the formation of salt deposits. The manufacturer recommends not to ignore the blinking indicator light and promptly carry out cleaning.
4. Those who are just planning to purchase a steam generator are advised to opt for models that operate on the principle of a boiler. Such electrical appliances heat up faster, maintain a given temperature and have a more powerful steam jet.
5. For those who do not want to overpay and purchase expensive models, it is recommended to opt for steam generators with a self-cleaning option.

For steam generators with a built-in cleaning system, there is no need to use additional products. If this function is missing, then you can get rid of scale using proven folk remedies and household chemicals. When carrying out the procedure, you must follow the instructions.

This approach will increase the service life of the device and prevent premature failure.

How to store your iron

The question of how to store an iron is an important one in a household appliance. Most often it is placed on a windowsill, in a drawer or in a special cabinet.

Refer to the instruction manual for information on how to properly store irons. The rules for using a steam iron are the same as for a regular iron. First of all, you should put it in a dry place where there is no sunlight nearby. It is also worth installing the device in a vertical position. This will help preserve the surface on which it is located. Make sure that the sole does not come into contact with hard objects, especially metal. Do not use it like other household items, such as cracking nuts or driving a nail.

Clean your iron regularly. The exterior can be wiped with a damp cloth, but not with a hard brush or various chemicals. This will lead to premature failure. And, of course, do not leave water in the iron.

It’s hard to imagine modern life without an iron, because daily trips to work and coffee require the right appearance. Finding someone who enjoys ironing is difficult, so be careful when choosing the right model. Obviously, steam ironing is much more pleasant and faster. But even if you prefer the standard version, you are sure to find a suitable model in hardware stores.

• You can only pour water into or out of the iron reservoir when the appliance is turned off. Don't neglect safety precautions.
• Experts strongly recommend that after ironing, drain the water from the device, set the iron handle to the “no steam” position and store the iron vertically in a cool place. What causes this? If you do not set the "no steam" mode, residual water will flow into the sole, which is best avoided.
• Once you have started using the iron, never point the steam directly at the laundry, as the steam chamber of the new appliance may become dirty. Note: First you need to pour water into the compartment, release a stream of steam, then start ironing.

How to use a steamer: safety rules

Like any household appliance, it is also necessary to adhere to established safety standards. In addition to the risk of electric shock, if used incorrectly, there is a risk of burns from hot steam. To avoid this, you must follow these simple rules:

1. Do not use the appliance if it shows signs of damage to the electrical cord, evaporator or hose.
2. When working, make sure that the steam jet is always directed away from you.
3. Make sure that the power cable does not come into contact with hot surfaces of the steam generator.
4. Do not point the vaporizer at pets!

When using a steamer, you must follow safety precautions.

Precautions for use

Do not use the device:

1. For treating surfaces not intended for cleaning with hot steam.
2. With a damaged power cord.
3. With wet hands.
4. In an explosive environment.
5. In conditions of high humidity.

During operation, do not touch the main unit where the steam generator tank is located.

If the manufacturer provides a refill function, carefully open the tank. The steam in the tank is under pressure and may be hot when you open the lid.

Do not direct the steam jet at exposed skin, other people or animals.

How to use: ironing features depending on the model

Steam generators of the Liberty and Fasteo series produce steam at a pressure of 5 bar. The devices quickly heat water to the required pressure level and steam dresses, suits, coats, curtains in a vertical position, without the use of an ironing board.

Classic models with simple controls from the Effectics, Optimo, Easy Pressing series provide effective care for things at no extra cost.

Steam vents are located on the nose, side and central parts of the sole. The steam supply mode is adjusted manually.

Pro Express steam generators feature advanced features that make ironing convenient and easy. Moreover, these devices are easy to use and maintain.

The Express Easy Contr model adapts to the material without unnecessary settings, providing automatic adjustment of steam parameters.

A similar No setting technology is used in the Effectic Anti-Calc steam generator, which allows you to iron items in a row without sorting them by fabric type.

Pro Express Care steam generators will provide gentle care for various types of fabrics, including expensive and delicate ones. The device has double anti-scale protection, which prevents lime flakes from falling out during ironing.

Steam generators Pro Express Ultimate and Pro X-pert Plus are equipped with the latest innovative developments from Tefal. The sole of the iron is made of durilium with the finest palladium coating.

During heating, a chemical reaction occurs, which performs the function of self-cleaning. During the chemical reaction, microscopic amounts of carbon dioxide and water are released, which do not harm health in any way.

Tefal express 2912

The rating of the best model for ironing clothes opens with the express 2912. The small size of the boiler allows you to achieve the required level of pressure in just a couple of minutes . For long-term use, add water to the steam generator.

Characteristic

Advantages

• Heats up quickly

Flaws

• There is no anti-scale system
• Lack of anti-drip system

I have long dreamed of buying such a device. I read the reviews, watched the video testing and decided to go with this model. The technology is powerful and a pleasure to work with.

Tefal express 2912

Before work

It is not difficult to prepare the device for use. After completing simple manipulations, you can begin ironing and steaming things.

Beginning of work:

• Place the stand with the iron on a stable surface.
• Make sure that the connecting cords do not interfere with the work process.
• Disconnect the boiler and fill with water (not in all devices).
• Insert the container into place until it clicks (for generators with a removable tank).
• Turn on the steam generator.
• Select mode.

Separately, it is worth dwelling on the quality of the liquid being poured.

According to the instructions for steaming, the use of five types of solutions is allowed:

1. Regular water from the city water supply. One condition is that the content of calcium and magnesium cations should not exceed 6 degrees of hardness.
2. Liquid that has been purified through special filter devices.
3. Bottled water without mineral impurities.
4. A solution of purchased water plus hard tap liquid (1/1 ratio).
5. A mixture of distilled and ordinary water in equal parts.

You cannot upload:

1. Pure distillate.
2. Mixtures with detergent additives.
3. Liquid with high salt content.
4. Carbonated and mineral solutions.

The design of the device, as well as the markings of the control buttons, allow you to work with the steam generator without any problems.

If questions arise during operation, you can always read additional information in the instructions for the Tefal steam generator.

Folk remedies

What should you do if you need to wash your iron or Tefal steam cleaner inside at home? In this case, you can speed up the process by using folk remedies. The simplest solution is a solution of citric acid.

• 25 g of citric acid and 1 liter of water are mixed until smooth (without visible crystalline particles).
• The resulting mixture is poured into the reservoir of the iron or steam cleaner. Passive exposure time is from 15 to 25 minutes.
• After the specified time has elapsed, the maximum temperature is selected on the steam-generating device. In steaming mode, the equipment must completely get rid of the liquid on its own. To speed up the process, simultaneous ironing of unnecessary cotton fabric is performed.
• Upon completion of cleaning, the device is cooled, clean water is poured into its reservoir, left for 15 minutes, and drained. The procedure is repeated up to 3 times to completely remove traces of citric acid from the system.

Vinegar cleaning is no less effective and allows you to additionally remove carbon deposits from the surface of the sole. In this case, the folk method involves the use of a product of natural origin. Vinegar (not essence) is diluted with water in equal proportions, then the mixture is poured into the steam station tank in a volume sufficient to cover 25% of its total displacement. After this, keep the device turned off for 20 minutes, then set the steam generation mode to full power, heat the device and begin ironing the unnecessary piece of fabric.

After all the liquid has evaporated, the tank is thoroughly rinsed with clean water. It is enough to repeat this procedure 2-3 times.

Cleaning with vinegar

Despite the variety of professional means for iron care, folk methods continue to be just as popular due to their cheapness and availability. Before cleaning your Tefal iron from scale, you need to take care of protective equipment, since some of the ingredients can be harmful to health.

We suggest you familiarize yourself with descaling your coffee machine

For internal cleaning the following are most often used:

• Mineral sparkling water. It is poured into a water container, the iron is heated and either the Selfclean button or the steam release button is used. All manipulations must be done over the container. The procedure must be repeated 3-4 times. Wipe the ironing surface. The carbon dioxide contained in the mineral water will dissolve all deposits.
• Citric acid is found in every home. To prepare the solution you need one tbsp. Dissolve a spoon in a glass of water. It is necessary to take purified or boiled water. Further cleaning is carried out in the standard way. During the procedure, it is necessary to use protective equipment: gloves and a respirator.

Important! Do not clean internally with vinegar, as this may damage the internal components of the device.

To clean carbon deposits from the soleplate of the iron, the following products are useful:

• Soda. Two tbsp. spoons into a glass of water, and wipe the cold device with the solution. Stains are removed with a rag soaked in water.
• Vinegar effectively helps remove carbon deposits; just wipe the device with it. If this does not help, then you can leave the iron overnight on a cloth soaked in vinegar.
• A mixture of vinegar and salt is suitable for particularly dirty surfaces. It is necessary to mix both ingredients in equal proportions and heat until completely dissolved over low heat, without letting it boil. Use the cooled liquid to wipe the burnt marks on the sole. The procedure should be carried out with rubber gloves.
• Toothpaste helps clean problem areas. It is spread on the sole and the iron is heated. Then the cotton fabric is ironed. Residues are washed off with water.
• Soap. The device must be warmed up, then the surface of the sole must be rubbed with 72% laundry soap. After cooling, the residues are removed with a soft cloth. The steam outlets are cleaned with a cotton swab. The sole is washed with water.
• Nail polish remover is used when synthetic materials are burnt to the sole. A cotton swab soaked in liquid helps remove burnt marks.
• Hydroperite. The heated surface is rubbed with a tablet; after cooling, the residue is removed with a cloth and washed with water.

Do not use abrasive materials such as powders or metal brushes to clean the soleplate to avoid scratching the ironing surface. When treating with a solution, you need to take cotton pads, gauze or cloth, and soft sponges.

Instructions for use by model:

• FV1526
• FV1542
• FV1543
• FV1544
• FV1550
• FV1611
• FV2350
• FV2674
• FV2675
• FV3161
• FV3215
• FV3300
• FV3310
• FV3320
• FV3330
• FV3335
• FV3510
• FV3520
• FV3530
• FV3535
• FV3810
• FV3825
• FV3830
• FV3840
• FV3845
• FV3910
• FV3912
• FV3915
• FV3920
• FV3922
• FV3925
• FV3930

• FV3951
• FV3952
• FV3955
• FV3962
• FV3965
• FV3970
• FV4180
• FV4491
• FV4492
• FV4493
• FV4496
• FV4650
• FV4680
• FV4880
• FV4944
• FV4961
• FV4963
• FV4970
• FV4971
• FV4980
• FV4981
• FV4982
• FV5116
• FV5177
• FV5180
• FV5185
• FV5195
• FV5216
• FV5247
• FV5266
• FV5335
• FV5350
• FV5353

• FV5354
• FV5373
• FV5375
• FV5377
• FV5378
• FV5380
• FV5381
• FV5510
• FV5515
• FV5520
• FV5535
• FV5540
• FV5545
• FV5546
• FV5548
• FV5549
• FV5608
• FV5615
• FV5630
• FV5640
• FV5645
• FV5648
• FV5655
• FV5714
• FV5715
• FV5716
• FV5717
• FV5718
• FV5719
• FV5735
• FV5736
• FV5737

• FV9350
• FV9550
• FV9736
• FV9776
• FV9834
• FV9835
• FV9837
• FV9844
• FV9845
• FV9867
• GV5010
• GV5120
• GV5125
• GV5140
• GV5150
• GV5220
• GV5221
• GV5223
• GV5225
• GV5230
• GV5240
• GV5245
• GV5247
• GV6340
• GV6350
• GV6600
• GV6720
• GV6721
• GV6730
• GV6732
• GV6733
• GV6760

• GV6761
• GV6770
• GV6771
• GV6915
• GV6920
• GV7070
• GV7080
• GV7084
• GV7085
• GV7090
• GV7091
• GV7095
• GV7096
• GV7120
• GV7140
• GV7150
• GV7160
• GV7166
• GV7250
• GV7255
• GV7260
• GV7310
• GV7315
• GV7325
• GV7340
• GV7341
• GV7350
• GV7450
• GV7455
• GV7460
• GV7465
• GV7470

• GV7485
• GV7550
• GV7555
• GV7556
• GV7558
• GV7615
• GV7620
• GV7630
• GV7636
• GV7750
• GV7751
• GV7760
• GV7780
• GV7781
• GV8110
• GV8120
• GV8150
• GV8310
• GV8320
• GV8330
• GV8333
• GV8335
• GV8360
• GV8365
• GV8370
• GV8430
• GV8431
• GV8460
• GV8461
• GV8471
• GV8500
• GV8600

• GV8700
• GV8800
• GV8925
• GV8930
• GV8931
• GV8955
• GV8956
• GV8958
• GV8960
• GV8961
• GV8962
• GV8963
• GV8976
• GV8980
• GV8981
• GV9060
• GV9080
• GV9110
• GV9150
• GV9360
• GV9460
• GV9461
• GV9562
• GV9563
• GV9568
• GV9570
• GV9580
• GV9581
• GV9591
• GV9592

Using the self-cleaning function

Scale formation is not the only cause for concern, but it is the most dangerous for heating appliances.

Not every iron or steam cleaner can be easily and simply brought into optimal working condition. The easiest way to do this is with a station that has a self-cleaning function. The presence of this possibility will be indicated by the marking on the packaging: Anti calc or Calc clean. You can clean the device using the built-in system without any extra effort. First of all, this option is available in Tefal GV series models.

A steam cleaner that has a similar option is equipped with a special button on the outside of the device. When pressed and held for 2 seconds, the filter is activated, which is located between the pump and the water reservoir container. The self-cleaning button activates the removal of dirt and deposits using pressurized liquid and steam.

The procedure for self-cleaning a steam generator or iron will be as follows:

• The water tank must be filled 100% with distilled water;
• the device is plugged in, warms up to maximum temperature values, after turning off the light indication, the equipment is de-energized;
• the device prepared in this way is transferred to a sink (preferably metal), placed with the sole down;
• press the self-cleaning button and hold for the set time;
• If the system operates correctly, dirt, rust, scale will flow out of the sole, and a jet of steam may appear;
• cleaning is carried out until the water completely drains out, with periodic shaking of the sole - if the liquid remains dark until the end, it is better to repeat the procedure;
• Upon completion of maintenance, the device tank is washed with clean running water and dried.