Why the LG washing machine does not spin and what to do

Buying a washing machine is a significant event for any housewife. An irreplaceable assistant allows women to save personal time without spending it on washing things. But over time, any household appliance unit becomes unusable. Washing units are no exception. If suddenly your LG washing machine stops spinning clothes, what should you do in this case?

LG machine

Common mistakes

LG Direct Drive washing household appliances are “smart” appliances. All functions are clearly programmed in the electronic module. Breakdowns caused by manufacturers are rare. More often than not, the cause of malfunctions is improper handling of the equipment by the user.

Among the popular mistakes that users make when working with washing units are the following:

Incorrect choice of washing mode, which does not provide a spin option.
Accidental pressing of the “No spin” button.
Drum overload.
Putting a small amount of things into the tank of the unit, which leads to an imbalance of the device.
Lack of maintenance of the pump and spin filter.

Call the master

In the event that it is impossible to cope with the diagnosis and repair of LG on your own, it is better to contact a household appliance repair company.

It’s easy to find a company on the Internet; you can also look for price lists and reviews there. Please note that the cost of new parts and assemblies is not included in the price for the work and is paid separately.

In the capital, repair prices are approximately as follows:

replacement of heating elements - about 2,000 rubles;
electric motor repair/replacement – from 2,600 rubles;
wiring repair/loop replacement – from 2,000 rubles;
replacement/repair of pressure switch – from 2,100 rubles;
replacement of shock absorbers - from 2,900 rubles;
replacing the Hall sensor - about 2,000 rubles;
repair of the control board - about 2,600 rubles;
replacement of motor brushes – from 1,800 rubles;
bearing replacement – from 4,300 rubles.

If it is necessary to carry out deeper repairs, involving other components, the cost will be higher.

Eliminating mistakes

If the LG washing machine does not spin, what should I do? First, study the characteristics of the selected washing mode. In some programs, the spin function is not included and this is not a malfunction. If you need to squeeze out excess water from clothes in the LG Direct Drive unit, you should select the appropriate option on the control panel.

Spin mode

Housewives often wonder why the LG washing machine does not spin at the operating mode in which spinning and draining should occur. Check, perhaps due to your own carelessness, the “No spin” button was pressed during the startup process. If you press the key again, the usual washing mode will be carried out without changes, with the laundry spinning.

If the LG washing machine does not spin clothes, you should check the amount loaded into the drum. If there is excessive or insufficient weight of the items that were placed in the washing tub, an imbalance occurs in the machine. To prevent damage, the unit stops spinning items and finishes washing. To restore operation, stop the process, open the door and spread the laundry evenly across the drum.

Loading laundry

The buyer can choose a washing machine

This manufacturer has both different designs and different price ranges, which LG has a very wide range. The average life of this equipment is approximately 8 years, but as practice shows, their resource is much longer. If you follow the technical conditions and maintain them in a timely manner, your household electrical appliance will serve you for several decades. Any breakdown of an LG machine is fixable.

Let's look at the situation when the washing machine does not spin. What to do? What is the reason that the machine does not drain water? How to make a repair? So why do housewives have to take wet, unwrung laundry out of the drum one fine day? Let's look at the reasons for the breakdown in detail. After all, only by finding out the problem, you can find a solution and fix the problem. When the spin does not work and at the same time all other functions are working properly, such as washing, draining water, rinsing mode, then the cause of the malfunction is often human inattention.

Maintenance

In order for the machine to work properly, it is necessary to periodically clean important components of the unit.

This means you need to clear:

drain pipes,
filter,
tank.

Cleaning the filter

Maintenance can be done manually or using special cleaning chemicals. It is important to check the contents of the pockets before putting things into the tank of the machine. The presence of change, keys and other small objects can clog the water drain pipes in the unit.

We find out why the LG washing machine does not spin clothes

Possible breakdowns

The LG Direct Drive washing unit may not function properly due to such malfunctions:

when the motor fails,
if the tachometer breaks down,
if the control module is faulty.

Control module

With prolonged regular use of the device, the motor responsible for the power and movement of the tank may become unusable. In LG models, the engines are reliable. But after 10 or more years, this element may break down. In this case, the machine may not only fail to wring things out, but also generally work incorrectly. The problem can only be solved by replacing the motor.

With regular overloads, you don’t have to wonder why the machine stopped spinning. In this case, the tachometer malfunctions. What to do if it breaks? Call a specialist who will identify the fault and replace the broken part with a new one.

Control module - based on a board that coordinates the operation of the entire unit. If this element breaks down, there are malfunctions in spinning, rinsing, and drawing water. To identify the problem, it is recommended to contact a technician who will replace the board.

Special cases: different models

Of course, the reasons for failures of one washing machine manufacturer do not always coincide with others; sometimes this also applies to models of the same brand.

The thing is that some malfunctions are associated with mechanical damage to parts, and some directly with the program.

Almost all models of the companies Zanussi, Indesit, Bosch, Kandy, Samsung, Lzh and others can be damaged due to the breakdown of such parts as heating elements, pumps, level sensors and pumps with belts.

Recommendations from experts

If the user notices that the washing unit has stopped draining water and spinning clothes, it is recommended to stop the device and try to determine the cause of the problem. First of all, the drain tube is checked. Cleans if necessary. Then, the number of items in the tank is estimated. If there is excess, you need to open the door and divide all the laundry into two or three portions. By loading each portion one at a time, you can improve the quality of washing, rinsing and spinning.

If the previous steps did not produce positive results, you should disconnect the unit from the power supply and wait a few minutes to start the machine again. Sometimes the program crashes, requiring a reboot. If this step does not resolve the problem, it is recommended to call a technician.

A specialist talks about the common reasons why an LG Direct Drive washing machine does not spin clothes.

How to prevent spin problems

A large percentage of household appliance breakdowns is associated with non-compliance with safety measures, operating rules and careful and attentive care of washing machines. In order to avoid critical situations when expensive repairs or complete replacement of parts are required, you should follow a certain number of rules and recommendations that will extend the life and functionality of the washing machine.

To prevent fluctuations in electrical voltage from becoming a threat to the washing machine, it is worth installing a voltage regulation surge protector.
Don't overdo it with laundry detergent: more is not always better. Follow the prescribed norm.
Never overload the machine with laundry - there should be moderation in everything!
After washing, remove the dispenser and clean it of any remaining washing powder and washing gels.
The nest in which the dispenser is located should also be cleaned with a cloth until it becomes dry.
The rubber cuffs on the washing machine doors also require care: after washing, dirt, threads, powder particles and products that destroy the structure of the part settle on them.
After washing, leave the hatch door open for 20-30 minutes to dry the inside of the drum and internal parts.
Do not use concentrated detergents for cleaning: they may corrode some rubber and plastic parts.
After washing, ventilate the room and do wet cleaning. Make sure that the parts are intact and that there are no leaks from under the lower housing of the unit.

Now you know how to properly care for your washing machine before and after washing. By following these simple points, you will not only extend the life of your equipment, but also save your budget. Also remember that if the spinning system stops working properly due to reasons related to the electronic module, motor and interruptions in programs, this is the reason for immediate contact with a specialist.

What to do first?

When your LG washing machine freezes, you need to make sure that the cause is not a user error . For the simplest analysis, disassembling the apparatus and special knowledge is not required.

Tank overload

Stuck in the wash cycle, or more often in the spin cycle, can occur when the drum is overloaded.
This situation may arise if the items sent to the drum are compact in size, but at the same time quite heavy.

During the washing process, the LG automatic machine itself cannot distribute them evenly in the drum, and the cycle freezes. If there is a suspicion of overload, you need to remove some of the things and then continue to operate the washing machine.

Mode selection

The user has the opportunity to select a mode from a wide range, and, in addition, additionally make his own settings, canceling, for example, spin or drain.

If the washing was carried out on delicate items, wool, etc., then the output of the product may be noticeably wet. This gives the impression that there has been a freeze and stop in operation. The remaining water in the tank can be drained by selecting the “drain” mode separately .

Imbalance of things in the drum

If the operation of the LG washing machine has stalled, you need to make sure that all the laundry is not collected in one lump. Often this situation occurs when washing bed linen, when absolutely all the items end up inside the duvet cover or pillowcase. Stopping work and laying things out manually will help solve the problem.

Stuck during washing

If the simplest reasons for stopping work have been verified, then it is necessary to move on to a serious analysis of the performance of the nodes. In order to narrow the scope of work, it is necessary to determine at what stage of the wash the freeze occurred.

Doesn't take up water

If the washing machine cannot fill with water, the program stops and the wash does not even start. In this case, the freeze appears right at the beginning of a given work cycle. To determine the exact reason for the LG stopping, you need to check all the systems that are involved in collecting water one by one .

The heating element burned out

A malfunction of the heating element in LG leads to a stop in operation.
In this case, the electronic unit sends a signal about the need to heat the water, but the heating element cannot carry out this work. As a result, the machine fills with water and the cycle stops.

You can make sure that the reason is in the heating element by carefully testing the temperature of the sunroof glass. If it is cold, then the problem is in the heating element . This hang-up can be solved by replacing the heating element. This article will tell you how to replace the heating element.

Damage to the water level sensor

The pressure switch is another important component, if it fails, washing may not even start. This part is responsible for determining the water level. If the pressure switch breaks, it is replaced with a new one.

Motor brush wear

In LG commutator-type machines, the motor brushes are responsible for transmitting rotational motion to the drum. If there is significant wear, contact is lost and the drum cannot accelerate to the desired spin speed. Over time, the problem even extends to washing - the drum does not rotate at all. The issue is resolved by replacing the brushes with new ones . Read how to do this here.

Drum jamming

If a foreign object gets between the tank and the drum, the rotation may stop. If the drum is jammed, the LG washing machine freezes.

Diagnostics is necessary to accurately determine the cause of the rotation stop. If it turns out that the problem is a foreign object, it will need to be removed. If there is a problem with the bearings, they are replaced along with the seal . Read how to change bearings here.

Drain violation

During washing, the LG machine fills and drains water several times per cycle.
If water cannot be removed, the program execution process stops. If such a malfunction occurs during washing, soapy water remains in the drum. It is impossible to immediately give a conclusion as to the reason for the lack of drainage in LG - diagnostics and checking of all components is necessary .

This can be either an easily removable blockage or serious damage, for example, to a pump or control unit.

Control module malfunction

If the LG control module breaks down, freezing can occur at almost any stage of processing items, including the washing stage. To analyze the performance of the circuit, it is necessary to partially disassemble the washing machine itself, disconnect the board, and test and repair it in a workshop.

The engine has become unusable

An LG engine can become unusable for various reasons - from voltage surges to water getting on it, long-term use and physical wear. If this particular part is to blame for the freezing, in most cases it has to be replaced with a new one rather than repaired . You can find out how to do this here.

Prevention

In order for the washing machine to function for a long time without any problems, it is advisable to follow the operating rules for such equipment. To avoid problems with spinning, it is necessary to periodically check the filter, do not wash items with any mechanical inclusions in the pockets, maintain balancing, and also monitor the condition of the electrical circuits of the device.

Not spinning your washing machine can be a really annoying problem. However, correct identification of the cause will ensure prompt repair of the equipment yourself without turning to specialists.

Stuck on spin and rinse

During the rinsing and spinning phases, the LG washing machine operates under load and with a large volume of water. The reasons for freezing that occur at these stages are largely similar.

Shock absorber wear

When the dampers wear out, vibration increases. The drum cannot reach sufficient speed and the spin and rinse cannot be performed as specified by the user. Replacing shock absorbers can solve the problem . Read how to do this here.

The tachometer is broken

The speed control sensor determines the intensity of drum rotation. If it breaks, the process stops and the machine freezes. Replacing the part helps solve the problem.

The pressure switch is broken

Pressostat is an element that determines the water level in the tank of an LG washing machine.

As a result, the work gets stuck on rinsing or spinning. Replacing the pressure switch helps solve the problem .

Analysis of the problem with the pressure switch - in the video:

Doesn't drain water

If the LG machine cannot drain the water, the operation process stops at the rinse and spin stage.

The reason may be:

sewer blockage;
clogged pipes;
clogged drain filter;
pump breakdown, etc.

You can find out what to do if your LG washing machine does not drain water here.

Control module malfunction

A failure in the LG control board results in incorrect cycle execution. Freezing can occur at any stage - both during spinning and during rinsing. Repairing the board will help solve the problem. In rare cases, module replacement will be necessary.

Motor malfunction

A motor breakdown can make itself felt at any stage of the cycle , including during spinning or rinsing. A malfunction makes the process of rotating the drum impossible. As a result, the work simply stops, and the washing machine freezes without finishing the wash.

Water supply valve problem

The water supply valve is responsible for drawing it in during the transition to rinsing. If the LG washing machine fails to draw water, it freezes. The cause may be a broken valve or a clogged valve.

Why does my LG washing machine get stuck on spinning, rinsing, and washing?

An LG washing machine freezing during operation is an unpleasant incident, and most often unexpected.
This does not always indicate a complex breakdown, and in some cases it is possible to deal with the problem even without a technician.

Why the LG washing machine freezes in the spin or rinse mode, we will tell you what to do to fix the problem below.