How to install blinds - basic recommendations. How to use horizontal blinds

Blinds are often used instead of curtains in an apartment with a modern or ultra-modern finish. Almost no office or other public space that involves engaging in intellectual work can also do without them. Many users do not know how to lower the blinds correctly, which is why the horizontal slats often warp and cause discomfort when using the room. To eliminate this problem, you need to know how to lower the blinds.

Blinds on the window

Characteristics of horizontal blinds

Horizontal blinds consist of the following components:

load-bearing cornice in the form of a box;
horizontal slats;
mounting brackets;
plugs for the cornice (installed on the ends of the box);
control mechanism, which is located on one side of the cornice box;
cord for adjusting the lifting height;
control cane;
swivel mechanism with rope lock;
bottom weight bar.

Such blind designs are very popular and are valued for their practicality, beauty and ease of use. Thanks to the horizontal slats, you can regulate the degree of sunlight penetration into the room.

Most often, slats are made of thin sheet aluminum, but there are also options made of plastic, wood and bamboo. Aluminum strips have a protective paint coating. They are resistant to fading and do not break (although they can bend if handled carelessly). The service life of aluminum horizontal blinds exceeds 15 years.

Additional advantages of blind systems with aluminum slats are their resistance to moisture and temperature changes, so such systems can be used in an unheated room (for example, on a balcony) or in a place with high humidity levels. There are different colors of slats on sale, as well as wood-imitation slats, which allows you to choose the blinds to match the color of the interior.

Structures with wooden slats are used only in residential premises with normal humidity. But plastic and bamboo slats also withstand high humidity conditions.

Important! The only drawback of systems with horizontal slats is that dust actively settles on such surfaces, so it must be removed regularly.

To regulate the penetration of daylight into the room, the slats are set at the desired angle by turning the control cane. In order for the design to serve the period stated by the manufacturer, you need to know how to use blinds.

Device Features

In order to understand how to properly close blinds, it is necessary to study the device itself, at least at the user level. The curtains have a cornice at the installation site for fastening, as well as slats, a control handle, which can be presented in the form of a thin stick, or in the form of a cane, chain, and also a control rope. For reference, the lamellas are protective strips that are fastened together.

They come in the following types:

Metal.
Aluminum.
On a fabric basis.

Operating rules

Most often, breakdowns of blind systems are associated with failure of the control mechanism.

To prevent this from happening, you must follow the operating rules:

To rotate the lamellas around their axis by 180 degrees, use a control stick. By changing the angle of the slats, the degree of penetration of sunlight is adjusted, up to complete shading of the room.
Now let's figure out how to raise horizontal blinds. To raise or lower them, you need to set the slats in a horizontal position by turning the cane. After this, by pulling the adjusting cord, you can raise the blade. To lower the canvas, you need to release the cord in the opposite direction. All movements should be smooth, without jerking or haste.

Important! Please note that the canvas can only be lowered to a specified height.

If you need to fix the curtain in a certain position, you need to pull the cord to install the curtain in the right place, and then, without releasing it, move the cord away from the vertical position and release it. Now that you know how to fix the blinds, you can install the curtain in the half-open position.

All actions to open and close the lamellas must be performed without sudden movements, jerks, and without exerting significant effort. If the blinds do not lower or open, a free repair can be carried out if the warranty period has not expired. Otherwise, you can do the repair work yourself, since the design is quite simple, or call a specialist.

Sometimes it happens that the control cord gets frayed. There is nothing wrong with this, because you can buy a new cord and install it yourself in place of the old one. If you are still not confident in your abilities, you can contact the company where you ordered the blinds so that they can carry out all the necessary repair work.

To remove dust from the slats, you can use a vacuum cleaner with a soft furniture attachment, which is turned on at low power, or use a rag. If necessary, wash the canvas with a damp sponge or cloth. They can also be removed from the mount and washed under running water from the shower. Just keep in mind that water should not get into the control mechanism located in the eaves box.

By following the above rules for operating blinds, you can be sure that the structure will serve you for many years while maintaining its original appearance, reliably protecting the room from sunlight.

Repairing blinds with your own hands - instructions!

With proper care and handling, high-quality blinds will serve well for a very long time. However, blinds, like any other product, may experience various types of breakdowns during use. If your blinds are also having problems, assess the extent of the problem and consider the possibility of carrying out repair work. You can solve a number of minor problems yourself. By the way, you can read about installing blinds on our website.

DIY blind repair

Typical faults with vertical blinds

Blinds repair

There are a number of the most popular breakdowns that you can fix yourself.

General view and arrangement of vertical blinds

Installing a new connecting chain

One of the most common breakdowns is a break in the chain by which the blinds slats are connected.

For repairs, buy a new chain from a specialized salon and insert it in place of the old part. Preliminarily count the number of vertical elements and measure their width. Traditionally, blinds are equipped with slats 8.9 and 12.7 cm wide.

Installing a new control chain

This chain breaks quite rarely, but you also need to be prepared for such a situation.

First step. Remove the side curtain rod cover.

Second step. Remove the plastic gear.

Third step. Put the connected back or a new chain onto the gear and insert it into the proper place.

The coupling lock must be located on the opposite side to the hanging gear. The sliders, however, must be in the open state.

Fourth step. Put the curtain rod cover back on.

Replacing the shoulder

In vertical blinds, the “shoulder” on the slats quite often breaks. This element connects the fabric to the cornice.

Buy a new “shoulder” from a specialized salon, having previously specified the width of the slats of your blinds.

Remove the damaged product and insert a new one in its place. Usually the “shoulder” is sewn in using fishing line, but some manufacturers glue the slats together. Be sure to clarify this point individually.

There are also blinds in which the “shoulder” can be freely removed and a new product installed in its place. If this is not your case, simply carefully cut the fishing line and sew on the whole “shoulder” using ordinary threads.

Installing a New Control Cord

This cord breaks quite rarely. Much more often, the quality of its fixation simply deteriorates, as a result of which the cord is pulled out of its place.

Before heading to the salon for a new cord, measure the height and width of your blinds. Using this data, a specialist will be able to calculate the amount of new cord you need.

You can also perform the calculation yourself. To do this, multiply the width of the cornice by 2 and add one and a half heights of the blinds to the resulting value. This way you will calculate the required amount of lace.

Pass the two ends of the new cord first through the side curtain rod and then through the runners. Place one cord into the fastening element, and thread the second through the roller. You will find it in the side cover, installed opposite to the control mechanism.

Pull the cord back to the fixing element, secure it in the form of a loop and twist it from above using a suitable tool (depend on the situation). When screwing, try not to press too hard, otherwise the product may burst.

Installing new runners

Repair of runners in vertical blinds

The most labor-intensive option for repairing vertical blinds.

Buy runners and special connecting distances for attaching the runners. Select distances in accordance with the width of the lamellas.

First step. Remove the control cord so that it does not interfere with your work.

Second step. Unscrew the control mechanism.

Third step. Pull out the sliders.

Fourth step. Move the sliders away from the broken element. Squeeze out or unfasten (as appropriate) the distance and remove the damaged slider.

Fifth step. Set the distance to the click in the whole slider, fixing the new element in place of the removed product.

Sixth step. Pull the control cord through the sliders.

Seventh step. Insert the new runners into the cornice by threading them onto the shaft.

Eighth step. Screw on the blind control mechanism. At this stage, it is advisable to enlist the support of one assistant - he will hold the shaft, and you screw the mechanism. Twist carefully, without excessive force, otherwise the mechanism may crack.

Ninth step. Return the control cord to its original position.

The renovation is complete.

These are all major breakdowns that you can fix yourself. If there is more significant damage, it is better to immediately contact a qualified technician, otherwise you risk completely breaking your vertical blinds.

Typical faults of horizontal blinds

Device

General view and arrangement of inter-frame blinds

This section of the instructions will be useful to owners of horizontal blinds. We provide you with recommendations for correcting the most common problems. Preliminarily assess the scope of the upcoming work and decide whether you can cope with the planned activities on your own or whether it would be wiser to immediately contact a professional repairman.

Problems with hooks and latches

Very often, in horizontal blinds, the hooks that take part in turning the slats, as well as the lower clamps, break.

To solve this problem, you must first of all buy failed spare parts from a specialized store and replace them. Make sure that the new clips are the same as the clips on your blinds (they can have a small or large diameter).

Remove the old hook and then simply install a new product in its place. To do this, insert a new hook into the hole in the turning mechanism. Hold the turning mechanism with one hand, preventing it from rotating, while inserting the hook with the other. After this, insert the cane into the new hook.

To replace the lower clamps of the blinds, unscrew the broken products and screw new fasteners in their place.

Replacing the lift cord in Venetian blinds.

1.Attaching a new cord to the old one. Cut the loop of the old lift cord and pull the loose ends out of the equalizer clip. To calculate the required length of a new cord, multiply the height of the blinds by four. Attach the ends of the new lift cord to the cut ends of the old one with duct tape. If they are nylon, they can be soldered by melting the ends in the flame of a match or lighter, and then clamped by pressing them together with wet fingers. The connections must be snug to fit through the holes in the planks, but also strong enough. If the connections break while pulling the new cord, you will have to remove the top bar to thread the cord through the blocks.

2. Pulling a new cord. Lower the blinds all the way down. Using a piece of folded cardboard, wedge the serrated lock of the lift cord to release the cord. Remove the cap from one end of the lowest bar and pull out the bottom bar. Grab the knotted ends of the old lift cord and gently pull the old cord along with the new one through the slats and top rail.
3. Strengthening the new cord. Once the connection between the old and new lifting cords is through the holes in the bottom bar, cut the connections and tie a knot at each end of the new cord. Throw away the old cord. Pull the wedge out of the lift cord lock. Pull the looped end of the new lift cord taut, check that the blinds are hanging straight, then pass the looped end through the equalizer clamp. Replace the bottom bar and cap.

For owners of private houses, we recommend buying rostavli. They are one of the best means of protecting premises from penetration, prying eyes, and protect from wind, noise, dust and light. Roller shutters have a beautiful appearance, harmoniously fitting into the architecture of the facility.

Functional purpose of blinds

Blinds are used for:

regulating the degree of room illumination by the sun;
protection from prying eyes;
limiting dust and moisture entering the room;
soundproofing.

Blinds allow you to adjust the level of natural light at your discretion, which traditional curtains do not have

Thus, such a replacement of curtains allows you to make the room more comfortable and safe for people.

See alsoBamboo in the interior - use cases

How to lower the blinds?

To adjust the illumination of the room, the position of the horizontal slats can be controlled. If their plane is installed almost perpendicular to the floor, then the flow of sunlight into the room will be completely blocked. When installing the slats in a position parallel to the floor, maximum daylight will pass through the gaps between the slats. And installing the slats at different angles to the floor plane allows you to regulate the degree of daylight illumination of the room.

In this case, you can not only change the angle of inclination of the slats, but also raise or lower the entire canvas, consisting of individual lamellas. To fully open the window opening, the slats are raised up to the limit, folding them tightly one to the other.

To lower a completely open canvas to a certain level, do the following:

First you need to make sure that the slats themselves are in a strictly horizontal position relative to the plane of the floor. If this is not the case, then you need to turn the control cane in the desired direction so that the slats are in the required position.
After this, move the control cord slightly to the side so that the locking cylinder releases the thread clamp. You need to pull the thread towards the central axis of the curtain. After this, without letting go of the cord, allow it to rise up, retracting into the eaves box. At the same time, the canvas of lamellas will gradually lower.

Attention! Once you pull the control thread to the side and it is released from the clamp, do not let go of it until you bring the blade to the desired position and fix the thread again. Otherwise, the curtain will drop suddenly, which may cause damage.

When the curtain lowers to the position you need, you need to fix the control thread so that the curtain remains in this position. To do this, move the cord away from the vertical position. If the control mechanism is located on the right side of the box, then the cord should be routed to the right side, and if the mechanism is installed on the left side, the cord should also be routed to the left. After this, the fixing cylinder will clamp the thread and the web will be held in its original position.
Now the control cord can be released, the canvas will be lowered to the level you require.

How to properly close horizontal blinds - World of Glazing

Most residents of the post-Soviet space live in standard apartments with a standard layout and standard sizes of door and window openings. For such apartments there is no need to order horizontal blinds according to individual measurements.

Most standard models presented in hardware and interior stores are quite suitable for protecting rooms from sunlight. The main thing is to figure out how to measure horizontal blinds so as not to make a mistake when purchasing, and to install them correctly on the windows.

Our article will talk about this.

How to attach horizontal blinds to plastic windows

Before you take measurements and go to the store, you need to decide how your blinds will be attached to the window opening. There are three typical mounting options:

to the wall above the window;
to each sash on the window profile;
to each sash on a glazing bead.

In the first case, the canvas will cover the entire window opening, which will cause difficulties when it is necessary to open the window, for example, for ventilation.

The second mounting option is more convenient, as it allows you to use each leaf separately, without even opening the blinds. But this method requires extreme accuracy.

If you accidentally damage the window profile during installation, it will be impossible to replace it; you will have to reinstall the entire sash.

Before attaching horizontal blinds in the third way - on glazing beads - you will have to face only one problem - the correct selection of screws.

A screw that is too long can damage the glass unit of the window, which will negatively affect its thermal insulation characteristics. And a self-tapping screw that is too short will simply not be able to hold the blinds on itself. But this is the only difficulty.

Otherwise, you don’t have to worry about anything when attaching it to a glazing bead; if something happens, this part is quite easy to replace.

We recommend reading what products can remove Coca-Cola stains from clothes.

Useful tips: how to quickly wet clean your apartment.

How to measure horizontal blinds correctly

It is very important to decide how to hang horizontal blinds before taking measurements. Depending on the type of mount, you will have to take different measurements. So, if you decide to install blinds on a glazing bead, the width of the panel will be determined as the distance between the bases of the left and right glazing beads of the window frame.

Important! The base is considered to be the side of the glazing bead that is adjacent to the window profile and away from the glass.

The length of the lamella sheet is determined accordingly - as the distance from the base of the upper bead to the base of the lower one.

If you intend to install the lower blind clamps also on glazing beads, the length of the curtain when purchasing must strictly correspond to the measurement results.

If you don’t need lower fixation, you don’t have to worry about the footage when purchasing, but choose a model longer or shorter than the measured distance.

If, when choosing how to install horizontal blinds on wooden windows or plastic frames, you decide to attach the canvas to the window profile, measurements should be taken as follows:

the width of the blinds is from the base of the left glazing bead to the base of the right glazing bead;
the length of the blinds is from the top edge of the sash to the bottom base of the bead plus 2 cm.

If you decide to completely cover the window with blinds, securing it on top of the wall, measure the total width and length of the opening.

Add 5 cm to the width on each side so that the slats fit tightly and beautifully on the walls. The length in this case can be increased or decreased at your discretion.

The most aesthetically pleasing with this method of fastening are horizontal blinds that reach strictly to the window sill, but do not touch it.

We repair blinds ourselves.

Blinds are a short-lived design. Usually the cords fray, the tapes break, the strips bend or break. Minor faults can be fixed by yourself (table), broken parts must be replaced, and to do this you will have to disassemble the blinds. And if the lifting cord frays, you can thread a new one through the slats and blocks without removing the blinds. Roller blinds most often have two disadvantages. Either the string is loose or too tight. To increase the tension, lower the blind halfway, remove the pin from the clamp and manually lift the blind up. Repeat this procedure until the tension returns to normal. To relieve tension, lift the blind up and remove the flat end pin from the clamp, then manually lower the blind halfway and push the pin into place.

Cause	Elimination
Bottom bars are not horizontal
The slats do not tilt	Secure the bands or reins to the tilt tubes with clips or pins
Lubricate the gear with machine oil
Turn the wheel until the teeth are in place
Replace the wheel or pin
The lift cord is not fixed	Pull the cord at an angle in one direction, then the other to find the position of the lock
Re-thread the cord
Incorrect handling of blinds	Pull the cord vertically down and point straight up

Terms of use

If the operating rules are followed, the product mechanism will work properly for decades. The rules of use are very simple:

Using a cane, the lamellas are rotated around their axis; by changing the angle of inclination, the degree of light penetration is adjusted.
To raise or lower horizontal blinds, you must first turn the slats to a horizontal position using a cane.
Then, using a cord, we raise and lower the canvas. In order to lift the canvas up, pull the cord down. To close, pull the cord up. You need to open and close with smooth movements, without rushing or jerking. The canvas can be lowered to a certain height.
To fix the canvas at a certain height, move the cord from the middle to the side and release it.
We carry out all actions calmly, without pressure. If something is jammed, call a technician if the warranty period has not expired. After the warranty expires, you can carry out repairs yourself or call a specialist for a fee.

If the cord is frayed, you can replace it at the blind manufacturer or yourself. To learn how to care for blinds, watch this video:

Wash the slats with a cloth using any detergent. You can remove it from the mounts and shower with warm or cold water. Dust is removed using a vacuum cleaner. For an example of correct installation of horizontal blinds, see this video:

When washing, it is not recommended to immerse the control mechanism located in the upper box under water. In addition, it is not allowed to leave it in water for a long time.

If all recommendations are followed, the product will serve for a long time, decorating the interior of the window opening, protecting owners from scorching sun rays.

Concept and types of blinds

Operating principle and control mechanism of blinds

How to repair blinds

Tips for choosing slats for blinds

Closing horizontal blinds

Now let's talk about how to close the blinds. Let's assume that the blinds are in the fully open position, that is, the slats themselves are installed in a strictly horizontal position, and the canvas is completely raised up.

To close the louver structure, do the following:

To begin, take the control cord in your hand and move it towards the central axis of the fabric to release the latch that clamps the thread.
Then, holding the thread, we allow the curtain to fall to the very end under the weight of the bottom bar.
When the window opening is completely covered with horizontal slats, we fix the canvas in this position. To do this, we move the control cord in the opposite direction from the canvas. At this time, the cylinder clamps the thread in the fixation mechanism. After this, the cord can be released.
To completely block the access of sunlight to the room, you need to turn the control stick clockwise or counterclockwise. In this case, the plane of the lamella will rotate around its axis and become perpendicular to the floor. Moreover, when the cane is rotated clockwise, the slats will turn their upper plane into the room, and when rotated counterclockwise, the lower plane of the slats will turn into the room.
By turning the cane all the way, you will close the blinds completely. There is no need to exert force and rotate the cane more than permissible, because this can lead to its breakage and failure of the control mechanism.

As you can see, there is nothing complicated in controlling horizontal blind systems. Moreover, thanks to convenient control mechanisms, blinds can be installed in the desired position, adjusting the illumination of the room.

It is recommended to keep all control mechanisms clean and protected from moisture, as corrosion and dirt can cause these parts to break or not function properly. If any part fails, you can easily replace it yourself, or by turning to a professional for help.

How to open blinds

Use a cane to open horizontal blinds. Turn it clockwise or counterclockwise. If you have to apply force, the element does not move, change the direction. With the help of a cane, the slats can be rotated 180°. Close until completely shaded in the same way.

If the cane is replaced with a cord, you will need to pull on it. In this case, you should not make much effort so as not to break the thread.

Installation of Venetian blinds.

Two cords regulate the height of the blinds and the tilt of the slats in this mechanism. The tilt cord on the left side is connected (insert) by a pulley, worm gear and tilt pin with bands on the front and back surfaces of the slats. The cord pulls, raising and lowering the tapes, change the inclination of the slats. The lifting cord on the right passes through the pulleys along the top rung and is secured under the bottom rung or bar. Pulling the cord downward presses the bottom bar, and the rest are stacked on it. A balance lock holds the ends of the lift cord together so that the bottom bar is level. The position of the bottom bar is fixed by the serrated lock of the lifting cord; if the cord is pulled in an oblique direction, the teeth will hold it in place. Other Venetian blind designs have stepped reins instead of strips and metal pins instead of a tilt cord. In some models, one ball chain on a pulley system serves both to tilt the slats and to lift the blinds. To remove blinds, remove the clips that secure the strips or reins to the bottom bar or rail. Untie the knots at the ends of the lifting cord and pull it away from the slats and pulleys. Pull the bars out horizontally and disconnect the bands or reins from the tilt pin. To reassemble, repeat the procedure in reverse order.

What to do if the fasteners are broken?

If the fasteners were broken due to careless removal of the strips, you can deal with the problem yourself .
First you need to go to the store and purchase clamps of similar size. They are available in all retail outlets that manufacture and sell blinds. In order not to make a mistake with your choice, it is better to take one mount with you.

First you need to remove it from the guide. If the outermost holder is broken, then there should be no difficulties .

When the fastening located in the middle of the blinds has been damaged, you will need to disassemble them completely by removing the chain. To get to the damaged element, the fastenings surrounding it are removed from the cornice along with the strips.

The lamella is removed only from the damaged holder according to the scheme described above . You need to act carefully so that the damaged plastic element does not tear the fabric strip. After purchasing the desired element, a lamella is inserted into it and the shoulder is returned to its place. All that remains is to hang the blinds back.

Repairing fasteners yourself is not difficult . The services of a master will cost at least 100 rubles per 1 element. At the same time, he will definitely take money for a home visit.

The average rate in Russia is 600 rubles. Thus, repairing one runner will cost 700 rubles. It is much cheaper to buy and install it yourself.

Instructions on how to lower horizontal blinds

An interesting and practical solution in window design are vertical blinds. Thanks to a wide selection of palettes and high-quality materials, they are in perfect harmony in the interior of offices, office premises, various institutions and home dwellings. Ease of use and a high degree of ergonomics allow the use of this category of product both in combination with curtains and for complete replacement of curtain fabric.

There are several types of blinds:

Japanese curtains;
roll;
photo of blinds;
pleated;
vertical;
horizontal.

But no matter what type is preferred, the positive aspects of the acquisition are based on the following principles:

Blinds protect the room from direct sunlight on hot summer days.
Helps protect furniture and equipment from fading.
They play the role of a kind of protection from prying eyes from the street.
They create the effect of evenly distributing light throughout the room, helping to increase the illumination of the room.
Easy to care for, resistant to moisture and heat.

Blinds ideally combine two main functions:

Sun protection.
Design solution for the interior of windows as curtains. The range of colors will allow you to choose any option acceptable for the room.

Horizontal blinds are considered practical and convenient for domestic use. In order for the structure to last for a long time, you should know how to properly lower horizontal blinds or, if necessary, raise them. To do this, it is important to consider mounting options, they can be:

Ceiling mounted (mounted to the ceiling).
Wall-mounted. The mount is located on the wall.
Window (the mount is located in the window opening).

The ability to raise the blinds or adjust the downward rotation of the slats is done using a rope. The structures are equipped with a special chain and rope, which allow them to be assembled and placed evenly along the height of the entire window opening.

How to repair vertical and horizontal blinds yourself?

When purchasing blinds, many are not interested in the operating rules of the systems, which leads to breakdowns of rather fragile structures. If you understand the structure of the product, you can repair blinds yourself. In most cases, replacement of a part or lamella is required, so when purchasing a structure, you should pay attention to whether the kit includes spare parts.

Breakdowns of vertical blinds and how to fix them

To repair vertical blinds, you need to know what breakdowns occur most often and for what reason.

The control cord is damaged or broken. If the tear site is in plain sight, you can simply restore integrity by carefully sewing the two ends together. But a more practical option is to replace the part. To do this, the cassette containing the control system is opened, the remains of the old part are removed, and the new one is carefully mounted through a special hole.

Advice

If the cord breaks very quickly, this indicates low quality components. Even if the kit contains a spare cord, it is better to take measurements from the product and immediately purchase a more reliable part.

If the vertical strip is damaged, the part is simply replaced. This is a simple but attention-consuming process, especially if the slats are threaded onto a chain rather than clipped to it.
You can reduce the length of the lamellas with your own hands. To do this, you need to carry out all the necessary calculations, apply marks, cut off the excess and run a control chain along the bottom of the strips.

If repairing vertical blinds requires reassembling the entire cornice or replacing many components, it is better to contact specialists. They will quickly and efficiently carry out the work, selecting the optimal parts. Only professionals can cope with reducing the width of a structure.

How to repair horizontal blinds?

In some cases, repairing horizontal blinds by professionals is even more expensive than purchasing a new system. Therefore, if a problem occurs, it is recommended to evaluate the breakdown and, if it is not possible to repair the structure yourself, consider purchasing a new product.

Complex repairs are allowed when wooden blinds break down; new systems will cost much more. The same approach is welcome when repairing custom-made structures.

You can repair horizontal blinds with your own hands in the following cases.

The lower slats are not parallel to each other. If deformation of the slats is not visible, this indicates displacement of the lifting cord. You will have to work with the cords until the slats are in the correct position. If necessary, the cords are fixed with clamps.
The slats do not move relative to their axis. First you need to establish the cause of the breakdown. If the tilt cord just comes off, it needs to be returned to its place and secured. If the moving mechanisms jam, they are lubricated with oil. If the driving parts (wheel or pin) have jumped out of place, they are returned to the correct position.
When the lifting cord becomes loose, this indicates improper handling of the structure. If a part has jumped out of the lock, it must be returned to its place. Sometimes you can simply pull the cord at different angles, and the element itself will fall into the desired position.
If the control lock jams and the system cannot be lowered, you need to pull the cord down firmly, but without pulling, and then point it up.
Replacing single lamellas is also possible, but you should pay close attention to the color of the plates: they can form a sharp contrast. To avoid this, sometimes several strips are replaced at once.

After repairs, you should think about your attitude towards the systems. Most often, breakdowns occur as a result of abuse of the strength of the lifting mechanism.

Repair of roll sun shading structures

If the blinds are damaged, there is nothing left to do but replace them completely. Considering the fact that the frame of the structures looks best with the “native” canvas, it is recommended to purchase a new system.

If the problem is in the lifting mechanism, you can solve it yourself. In this case, the cassette is opened or the canvas is removed from the roller, and the cause of the breakdown is eliminated.

Replacing a broken cord is very easy. Just don’t tie the two ends together; it’s better to replace the part completely.

If the problem is that the curtain does not adhere tightly to the surface of the glass, you need to check the guides and weight at the bottom of the curtain.

When the problem is in fixing the structure to the frame, the system is dismantled and the optimal type of fastening is selected.

Conclusion

There is no need to repair blinds if you follow the rules for operating sun-protection systems and initially check the quality of the components. Cheap models won't last long, so don't chase false savings.

If you identify a breakdown that cannot be fixed on your own, consulting a specialist will be very useful, but it is worth considering that repair teams can exaggerate the complexity of the problem. If possible, it is better to initially purchase systems with a guarantee, this will help save money and extend the life of the blinds.

Source: https://gidshtor.ru/sdelaj-sam/remont-zhalyuzi.html

How to lower the blinds?

Nowadays you rarely see a house or apartment without decorative items such as blinds. They protect household members from direct sunlight and the prying eyes of strangers. If you purchased horizontal blinds, then some recommendations for their operation will be useful to you. Including how to lower them down or raise them up.

Malfunctions and repairs of different types of blinds

Quite often, fragile structures such as blinds break if used incorrectly. But if you know their structure, you can quite quickly repair blinds at home on your own.

Often, breakdowns of plastic structures are associated with the replacement of slats or components, so when choosing blinds you should definitely pay attention to the fact that the kit includes spare parts.

It is worth knowing what the design of blinds is and what breakdowns are most common in such products.

Correct management

To properly lower horizontal blinds down, you need to use a cane to set the mode you need. By rotating it in a circle, you will definitely choose the best option. With such rotational movements they can be closed or opened. By directing the lamellas downwards, you direct sunlight there; when directing them upwards, the movement will be the opposite. On the right or left side of the cornice there is a rope, which is needed to adjust the height of the device. If you pull it towards you, the lower strips will group like an accordion and rise up, increasing the access of light. By moving the rope from side to side, you will return them to their original position.

You should not make any sudden movements, because the rope may break and the blinds will become unusable.

We figured out how to use these blinds. Now some information about their slightly different species.

There are devices that, instead of a rope, have a chain on one side and the other. Operation in this case will also not be difficult. At the top of the chain on the sides there is a mechanism that allows you to rotate the strips in the desired directions, regulating the access to sunlight. You only need to pull the chain on one side and then on the other to immediately understand the actions taking place with the blinds.

By lowering and raising the blinds several times a day, you will quickly acquire the skill and use it with ease. The main thing is to take your time so that the chains do not get tangled.

To summarize, horizontal blinds are the most practical to use. They are installed in houses, apartments, offices.

To keep your blinds clean, you can periodically wipe them with a damp cloth. You can also do a thorough cleaning by removing them from their mountings and placing the blinds under the shower using detergent. You should not use hot water and a large amount of soap solution or detergent for washing, because the residue from the detergent may damage the blinds. After washing the blinds, you need to dry them thoroughly so that no moisture remains, and then hang them in place. In cases where something goes wrong (the blinds are stuck, the mechanism is jammed, the rope or chain is broken), you should contact a specialist. If you do your own repairs, you risk being left without them.

Aluminum and metal devices do not deteriorate when exposed to sunlight and are considered more practical because they are coated with special paint and can last you a very long time if handled correctly and carefully!

How to hang it back?

It is not difficult to hang the blinds back after washing, since the procedure for removing them has already been mastered.
The procedure is the same, but in the opposite direction:

holding the lamella at the base, turn it sideways;
the loop is inserted between the clamps - a characteristic click will indicate that it has taken its place;
proceed in the same way with all strips;
When the slats are hung, weights are installed and chains are attached to them.

All that remains is to enjoy the look of the washed blinds and the freshness in the room.

Principle of operation

The curtains can be raised by pulling the rope located on the side. At the same time, the slats will be pulled towards each other and will gather at the top of the window. It will take some effort to move the heavy slats up.

It is possible to change the illumination of a room using a cane. To do this, rotate the element. During the process, the angles of the lamellas will change.

Variety of materials: features of the most common options

The most common types are metal, plastic, fabric or wood. A comparison of the basic characteristics of blinds made from these materials is given in the table:

Evaluation criterion	Metal	Plastic	Textile	Tree
degree of vulnerability to sunlight	does not fade	fades a lot	fades a lot	hardly fades
ability to resist the damaging effects of moisture	high	very high	low	high
degree of hygiene	easy to clean, does not absorb odors	easy to clean, does not absorb odors	relatively difficult to clean, absorbs odors	easy to clean, weakly absorbs odors
weight	big	average	small	big
price	relatively high	low	low	relatively high
existing models	horizontal	horizontal, vertical	horizontal, vertical, roll	horizontal

As can be seen from the table, each option has pros and cons. It cannot be said that one of them is better than the others. There are different types of blinds for different situations.

Vertical blinds made of wide fabric strips with leaf patterns

Metal blinds in the interior

All the excellent characteristics of this analogue of curtains, their enormous resistance to harmful influences, hygiene, durability, are covered by one unpleasant drawback. They get very hot in the sun, and then give off their heat to the room, making it hot. Because of this, they are rarely used in living spaces - living rooms, bedrooms and offices. Only in non-residential rooms.

Aluminum blinds are easy to clean - just wipe with a damp sponge

When metal blinds touch during opening, they produce a characteristic “clanging” sound.

But for an open terrace in the garden, veranda, workshop, this option is perfect. Aluminum blinds look strict and graphic and fit well into modern and classic styles.

See alsoOld “suitcases” in interior design

Advantages and disadvantages of plastic

Blinds made from this lightweight technological substance are more common than any other type. Despite not the best strength characteristics and a tendency to lose color over time, plastic is practical and convenient. And, importantly, it’s cheap.

Cheap, low quality plastic will quickly lose color and integrity.

From a design point of view, its possibilities are very wide. Plastics come in all shades and textures and are easy to shape into custom shapes. Wave-like elements, for example, look very impressive.

Plastic slats are more resistant to mechanical stress than aluminum counterparts

In addition, vertical blinds are also made from plastic. And they, according to many, partly resemble classic curtains. And, due to this, they fit better into the interior of a residential building. They are also suitable for arched windows, characteristic of some traditional architectural styles, and, if necessary, emphasize the symmetry of the room.

See alsoBottle decor with ribbons - luxurious, ornate, unusual

A traditional material with many possibilities: fabric blinds

Housewives usually have more confidence in blinds made from eco-friendly cotton or elegant polyester than from plastic or, especially, metal. And this is justified for living space. Yes, fabric reacts more strongly to moisture, soot, and fat. But, for example, in the living room all these things are unlikely to be found often. There the use of fabric is quite possible. The same goes for bedrooms, study, library and other similar rooms.

The fabric for the lamellas is impregnated with a moisture- and dust-proof composition

Among the advantages of the fabric are the following:

Variety of options. Fabric blinds in the interior can be of any type. Matter in this sense has no limitations. In addition, it makes it possible to choose from an unlimited range of colors and textures, and photo printing can be done on it.
Ease. Curtains of any design based on fabric will not require additional strengthening of window frames. Accordingly, their installation is easier to carry out.
Economical. This is especially true when it comes to roll options, which require a significantly smaller amount of material for manufacturing. As a result, the final product is cheaper.
Feeling of comfort. Whether we like it or not, natural, natural elements are emotionally perceived by us as warmer. Therefore, people subconsciously perceive the fabric as a more “cozy” solution, suitable for the living room, dining room, and bedroom.
Compatible with a wide variety of styles. Both modern and traditional styles work well with material. Classics require more restrained shades, modernity will welcome bright contrasts and bold prints. One way or another, you can choose a suitable type of fabric blinds for almost any style.

Beautiful blinds made of multi-colored strips of fabric

Fabric products, both consisting of individual segments and rolls, have great potential.

See also: Limitless finishing possibilities: decorative plaster on interior walls

Features of wooden blinds

Wooden blinds have good performance characteristics. Durable, hygienic, they can last a long time. In addition, many people really value the appearance of wood, its smell, and its environmental friendliness. It, like natural fabrics, subconsciously seems warm and homely to people.

Although wooden blinds are quite expensive, the game is worth the candle, because nothing can replace the sophistication and beauty of natural wood

Wooden slats will fit perfectly into any interior

There are, however, several disadvantages that make wood products not universal:

Firstly, there is cost. It is significantly higher than that of fabric or plastic.
Secondly, the limited range of colors. Sometimes it is difficult to choose a tone that would harmonize well with the interior of the room.
Finally, wood is quite difficult to combine with plastic. Therefore, in most cases, such blinds are installed on wooden windows.

See alsoWood in the interior: decoration, furniture, decor

Instructions on how to lower horizontal blinds

There are several types of blinds:

Japanese curtains;
roll;
photo of blinds;
pleated;
vertical;
horizontal.

But no matter what type is preferred, the positive aspects of the acquisition are based on the following principles:

Blinds protect the room from direct sunlight on hot summer days.
Helps protect furniture and equipment from fading.
They play the role of a kind of protection from prying eyes from the street.
They create the effect of evenly distributing light throughout the room, helping to increase the illumination of the room.
Easy to care for, resistant to moisture and heat.

Step-by-step instructions on how to properly remove vertical blinds for washing

Vertical blinds are practical, modern and convenient designs that serve to decorate windows, protect from sunlight and prying eyes.
They can often be found both in office premises and in residential buildings. However, when it comes to washing, their owners are faced with a serious question - how to remove vertical blinds for washing without breaking the fastenings, and how to hang them back. Answers to these and other questions can be found in the article.

How to properly lower blinds

There is nothing difficult about learning how to operate horizontal blinds. The slats lower and rise, and are also fixed with a fairly simple mechanism. However, despite the seemingly ordinary design, it is advisable to adhere to some rules.

How to do it?

Most often, buyers have a question related not to how to raise the blinds, but to how to lower them. In order for them to serve you faithfully for more than one year, you need to know how to use them correctly. The most common material for quality products is aluminum. Because the metal is very resistant to bending and various loads.

Today you can choose blinds for every taste and color. The horizontal version is fixed with an overlay. The most common attributes are a cord and a leash, with which it is easy to lower and raise the slats. This control makes it possible to lower and raise horizontal blinds, as well as secure them in a position convenient for you.

This piece of furniture must be handled extremely carefully so as not to damage the rather fragile structure and extend the life of your blinds. To start lowering them, just pull the lace down.

How to carefully unhook the strips (lamellas)?

There are craftsmen who clean blinds without removing them from the window, but such cleaning cannot be called complete. To effectively remove dirt from them, they need to be removed and washed.

The main task that an inexperienced person faces is not to damage the clamps and the strips themselves. To do this, you must strictly follow the sequence of actions:

Rotate the slats (blind strips) so that they are in the “open” position. To do this, a chain of command is used.
Remove the guide chain from both sides of the bottom weight of each lamella.
Remove the weights from the strip. This is what weight bars are called.
Remove each strip from the curtain rod. The upper part of the lamella is grabbed near the slider and slightly turned, lifting it up by 3-5 mm. There should be a characteristic click. Then the strip is bent towards the long part of the fastening clip and sharply pulled down.

If everything is done correctly, the strip should remain in the person’s hands. A simplified description of the procedure is as follows: “lift, move the plug to the side, pull sharply.”

If the blinds do not turn, the reason lies in a broken guide. Trying to remove the closed strips is strictly prohibited. To troubleshoot problems, you need to call a technician.

Spring mechanism for roller blinds

The choice of roller blinds and their adjustment systems is very diverse. Depending on the type of room, desired qualities and personal preferences, even the most demanding customer can choose roller blinds.

Roller blinds have only recently begun to gain popularity. Thanks to them you can decorate any apartment or cottage. But this requires understanding how these curtains are designed and how to choose them according to your needs.

Blinds in the interior as an artistic medium

In addition, blinds on the windows make the design of the room more interesting and stylish. There are several most common design techniques based on their application:

Changing proportions. Vertical or horizontal stripes can visually adjust the proportions of the room. Make it taller or wider.
Playing with light and shadow. Clearly defined stripes of light and shadow moving along the surfaces of the floor, walls and furniture can highlight the features of their shape, the beauty of the materials used, and their texture. This works especially well for modern, sleek styles that lack decorative details.
Introduction of colors and prints. There are blinds with almost any image, pattern, photo printing. With their help, you can significantly enliven the interior of a living room, nursery or bedroom, add brightness and contrasts to it.

Bright accent in the interior

In other words, blinds are a powerful artistic medium with great potential.

Jacquard blinds in a refreshing blue color

There are a huge number of types of this product on the market. Different samples can vary greatly in price, appearance, functionality, etc. It is worth understanding what kind of blinds exist. What are the unique features of the proposed models?

Stylish blinds with an abstract pattern matched to the upholstery of a gray sofa

See alsoOriginal decor with butterflies: photos, tips, materials

Features of horizontal structures

With a large selection of different models and types of canvas, vertical blinds still occupy a leading position among the choice of buyers. This design perfectly protects the room from sunlight and heat, diffuses bright light, and also fits well into almost any interior. The practicality and convenience of this type of structure are undeniable, and they are easy to care for. In order to correctly perform simple actions, such as lowering horizontal blinds, you need to know what type of fastening the structure belongs to. It can be:

Attached to the ceiling;
With wall mount;
With fastening in the upper part of a window or decorative niche.

Depending on the mounting location, access to the control mechanism is provided. If the box with the mechanism is located quite high - for example, in the case of ceiling mounting in rooms with high walls and large windows, controls such as the cane and cord must be of appropriate length and strength.

There are three controls in total:

The entire box into which the folded sheet of lamellas is assembled;
A cane that allows the slats to rotate;
Cord that allows you to adjust the length of the fabric.

How do I move window blinds down or up? You must first bring all the blade plates into a horizontal position by turning the cane around its axis. Then, using rope tension, the structure is assembled to the required length. To lower horizontal blinds, you need to pull the cord from the middle of the canvas to the side. The control mechanism is soft and requires smooth, slow movements to avoid damage.

The slats are adjusted using a stick attached to one of the sides of the structure. By turning it around its axis, you can tilt the slats at the required angle, receiving the required amount of lighting or completely closing the room from the sun and prying eyes.

Control of vertical blinds

Canvases with vertical lamellas, similar to curtains when closed, have different control designs. Since they are intended for large windows or even as partitions for interior space, there are several common ways to close and open vertical blinds.

The slats move to the opposite side of the control mechanism;
Control elements on the same side where the slats slide;
The slats move from the center to the edges;
Move from the edges to the center.

The control mechanism for vertical blinds is represented by a cornice, to which all slats and other parts are attached. It must be durable and easily support the weight of the entire structure. It contains runners with fixed lamellas, which move along the cornice and allow you to tear off - push apart the structure using a special rope.

The control chain or, in some cases, the same as for horizontal models, a cane, the rotation of which ensures that the lamella rotates around its axis and regulates the required amount of lighting in the room.

The lower part of the slats is equipped with weights and a connecting chain, which ensures their level position.

The modern choice of blinds, taking into account taste and the required design, is very extensive - you can choose the type and color scheme for any situation. By following the operating rules and properly caring for your blinds, you can significantly extend the life of their flawless operation.