Products for cleaning and polishing granite or marble: how to properly care for the stone

Marble has been used by mankind as a decorative material since ancient times. Unique data on its processing have survived to this day, but not everyone knows that it needs careful care. Cleaning marble is a painstaking process that must be carried out according to certain specifications. Neglecting them will certainly lead to loss of attractiveness and damage to the integrity of the product.

In most European countries, people who use marble in interior design take care of it and pay special attention to its protection. In our area, people think less about caring for their floors, as a result of which the stone darkens and loses its original appearance.

Daily care of marble products

Everything you may need for care:

• Soft fabric.
• Warm water without adding any detergent or soap.
• A piece of suede can be replaced with a simple towel.

Throughout the year, it is necessary to wash marble with detergent; ordinary dishwashing detergent will do the job perfectly. After cleaning with the cleaning composition, it is necessary to rinse the surface with clean water and wipe dry, and then polish with a towel. These procedures limit the daily care of marble.

In the case of this stone, cleaning cannot be delayed: if you stain the floor, it must be cleaned immediately, before the coloring compounds are absorbed into the thickness of the marble.

You cannot rub the surface, you can only blot stains from the liquid. But there are other methods of washing marble that you need to know so as not to damage the surface of natural stone.

Daily cleaning

This is done with a dry or damp sponge or soft fiber cloth. In case of wet cleaning, do not add caustic cleaning agents to the water. Marble is a carbonate rock that is extremely sensitive to acid attack. A small amount of vinegar, lemon juice or a caustic detergent can eat away at the stone. This is especially noticeable on a polished surface.

If you need to degrease a marble surface, it is permissible to use only products with neutral PH or a solution of baby soap.

How to clean a marble floor

The principle is simple; cleaning marble consists of two stages:

• cleaning;
• marble protection.

Before washing, you need to dry clean the stone and remove dirt, dust and other small solid contaminants from the surface using a coarse brush. Next, the floor must be treated with a special protective composition for daily use (for example, LEM-3 cleaner).

To remove strong and stubborn stains, it is important to use concentrated, safe cleaning solutions (Ultra Stripper). After wet cleaning, the stone must be completely dry naturally, and after that you can begin to apply a protective coating to the surface.

There are three methods that help keep your flooring looking great for a long time:

1. Application of wax. It helps create a protective film on the surface of the marble that lasts for a long time, protecting it. The wax-coated stone shines and retains its original appearance for a long time.
2. Since this is a porous material, it absorbs various compounds well, so it is best to impregnate the surface with special dirt-repellent agents . They prevent various contaminants from penetrating deep into the structure of the stone, creating a special protective film, making it easier to clean. Such impregnations additionally tint the stone; after their application, it looks wet and shiny.
3. The third method is mixed, it includes a combination of impregnation and wax . The owner does not need to apply the compositions one by one; ready-made products are available for sale. Idea HP has proven itself best.

In stores you can also find combined detergents that are suitable for daily use. They contain synthetic and natural wax, as well as safe cleaning ingredients.

Most owners of marble floors prefer to apply polish to the surface after washing. Such compounds have a special anti-slip effect.

Overview of special care products

There are many professional cleaners specifically for marble surfaces that will help keep your floors clean and shiny. They contain the correct pH level. Before use, carefully read the instructions. When choosing a detergent, it is advisable to consult with the stone manufacturer.

Stone Care kit

This set includes 3 products of 200 ml each. To clean the stone, it penetrates deep into the pores, draws out dirt, and cleans the surface. The protective coating is sprayed in a thin layer and wiped with a clean cloth. The polish is applied in an even layer to add shine.

Spray Rr/1

A popular foam product for home stone care. It is a spray for cleaning and adding shine.

Magnia Macchia

Stain remover paste is specially designed to remove traces of oil, coffee, and wine from marble surfaces. Removes deep stains and restores the beauty of the stone.

Detergent Lem-3

Concentrated detergent is designed to remove dirt and stains from marble, granite, and ceramics. Used in dilution with water and in pure form.

Rust eater

Gel for removing rust stains from marble, granite. Does not contain acids, applicable to all types of stone.

Stone Tech

Professional products for cleaning marble surfaces, used in cleaning companies.

Resolve

Marble cleaners have a mild chemical effect and a neutral pH level.

Simple Green

The American company’s universal products are designed to remove stains and stubborn dirt from various surfaces.

See also

Instructions for cleaning coffee machines from different manufacturers and the best products

Fila PS 87

Detergent for wax removal and degreasing is used in diluted form.

Sanet Sprinter Lavosan

Spray for washing marble is gentle on the surface, does not leave streaks, and adds shine.

Fila Marble Restorer

Designed for restoration of small areas of marble and other stone. If the surface is damaged by acids or precipitation, the product will help restore its original appearance. Consists of sponges, polish, gloss, gloves.

Kiiltoclean

The Finnish brand produces detergents and cleaning products for various surfaces. A wide range allows you to choose the right product for cleaning around the house.

Fila Claner

Neutral concentrated detergent for all types of natural stone flooring.

"Melon Zhs 9"

A concentrated detergent with an antibacterial effect is used for washing and disinfecting marble floors, tiles and other types of surfaces. Does not leave streaks, gives shine and freshness.

Mellerud

The company produces a variety of products for surfaces made of stone and others. Here are polish and impregnation for marble, cleaning and care products, rust and cement remover.

Docker Hydrofob oil

Designed to protect marble and other materials from moisture and atmospheric influences. The surface acquires water-repellent and anti-slip properties.

Akemi

Rust remover for quickly and efficiently removing stains from marble.

Syntilor Pietra

Removes rust, moss, lichens, lime deposits, cement deposits.

HG

Cleaner for marble and natural stone, suitable for regular use. Cleans and leaves a mirror shine.

Kristall-T Tenax

Water-based crystallizer for marble and calcium-containing natural stones. Restores the natural shine of worn surfaces. The result lasts for a long time. For internal use.

Safe stain removers

Marble cleaning is carried out only with specialized preparations that are gentle on natural stone and cannot damage its surface. Bellinzoni brand products are rightfully considered leaders in this niche.

The following products have proven themselves to be the best:

1. Stone Care Kit. This is a whole care kit not only for floors, but also for all marble products. It includes a cleaning agent, a protective coating, and a polish.
2. Spray RR/1. As the name suggests, this is a foamy spray cleaner that, thanks to its texture, penetrates deeply into the thickness of the stone and effectively pushes contaminants out. The product is safe for stone, easy to use and can be used for daily care of marble floors.
3. Mangia Macchia paste copes well with organic dirt, grease stains and coloring liquids. The composition does not contain coarse abrasive particles, it is not capable of disturbing the integrity of the stone polishing, and no streaks appear on the surface. Can be used for both light stains and deep cleaning.
4. Detergent LEM-3. A deep cleaning product that helps remove old and severe dirt from the surface. It comes in the form of a concentrate, so it must be diluted with plenty of water. But if the dirt is very ingrained, then the marble cleaner can be applied in its pure form.
5. Rusteater. The simplest concentrated product, which comes in gel form. Suitable for removing rust from the surface of natural stone. You can fully care for marble with its help only in the case of countertops in the bathroom or kitchen.

Cleaning tool

To properly and effectively clean and add shine to cast marble products, you will need:

• rubber gloves to protect hands;
• sprayer with water;
• soft, clean rags or napkins;
• universal or, depending on the type of contamination, special cleaning agents without abrasive particles;
• technical (pure) gasoline or denatured alcohol, white spirit.
• car wax to add shine.

We recommend: How to dilute bleach for disinfection against coronavirus: ideal proportions

Removing stains from marble surfaces

In order to effectively remove stains from natural stone, it is necessary to identify what caused the appearance of this or that contamination, and only then think about what to wash with.

Divorces

If stains appear from non-coloring liquids, you can remove them as follows:

1. Once you notice a wet spot, blot it with a paper towel . You cannot rub , as this will increase the area of ​​the spill, and you will simply rub moisture into the pores of the stone.
2. Use a sponge dipped in a mild soap solution to wipe the stained area.
3. Use a towel to remove any excess moisture .
4. Polish the surface with a dry soft cloth, and then there will be no more streaks.

Organic stains: coffee, tea, tobacco, juice, soda

It is easy to determine that it was organic products that left stains on the marble, because they turn slightly pink. If contamination appears on marble that is located outdoors, then you don’t have to worry - it will wash off on its own with rain or fade in the sun.

Such processes do not occur indoors, so bleach must be used for removal.

How to clean marble using hydrogen peroxide and ammonia:

1. The two substances must be mixed in equal quantities and applied to the stain.
2. Leave for 24 hours .
3. Remove any remaining cleaning solution with a napkin and rinse with water .
4. Wipe thoroughly.

Grease and oil stains, lotions, cosmetics

Such substances leave dark marks on the stone.

You can remove them using a natural absorbent, starch is best suited:

1. It is poured directly onto the stain and left for several hours , the procedure is repeated until the stain completely disappears.
2. Then the surface must be thoroughly washed using any cleaning agent for natural stone.

If the stain does not come off the first time, you can try using a solvent to clean the marble:

1. Soak several paper napkins in acetone and place on the stain .
2. After a few minutes, everything can be removed , and the room must be well ventilated.

Rust

To remove this stain, you must use professional marble cleaners. Rust Eater gel is the best choice. Use it to wash stone surfaces according to the instructions on the package.

Plant contamination: mold, algae, fungus

Such stains can be easily removed using a mixture of hydrogen peroxide and ammonia.

Ink

Such contaminants can also be easily removed with peroxide and ammonia. But these substances can only be used for white marble; for dark stone, acetone is the ideal solution. The cleaned surface can be further polished with wax.

How to prevent the formation of stains and prevent the destruction of marble?

If the marble floor is in the hallway, you should protect the surface and lay out a rug, otherwise street dirt and sand stuck to your shoes will definitely leave scratches.

You should not walk on natural stone floors in your home with shoes. The best way to preserve its original appearance is to walk on it barefoot, which, however, is not always possible.

A marble countertop is a stylish decorative element, but it gets dirty easily. Therefore, it is imperative to use cutting boards for cutting food.

Glass glasses must be placed on special stands, especially glasses with wine. Hot dishes should also not be placed on an unprotected stone countertop.

Only specialized products should be used for marble, and then at home, natural stone will retain its original appearance for a long time.

How do you like the article?

Granite polishing products

The final step after washing granite and marble is polishing the surface. Choosing granite polishing products is not difficult; the most popular are:

• AKEMI silicone polish - in addition to imparting a soft shine, you get the effect of protecting against dust. Price from 600 rub.
• Cleaning polish AS-22 from Bellinzoni - with this product you can immediately remove dust deposits and polish stone surfaces. Cost from 1100 rub.
• For the floor, it is better to use a polish with an anti-slip effect, such as AS-11 Bellinzoni.

Wax polishing agents are also good, giving the stone a special beauty and mirror shine. They retain the flawless appearance of the stone for a long time. The disadvantage is that over time you will need special products to wash off the wax.

We hope our tips on how to clean granite and polish the surface will help you choose the right products so that your stone cladding always shines clean!