Windows covered with sweat not only impair your view, but can also cause mold to grow in your home. Many housewives are concerned about the question: how to treat plastic windows against fogging? Any product that forms a slippery film on the surface will help: soap, glycerin, shaving foam. Droplets of moisture will not be able to stay on the glass, and the window will remain transparent under any circumstances.
What makes glass sweat?
Leaks on windows in your home can be caused by several reasons.
For example:
- Increased humidity in the room and poor air circulation. Condensation especially accumulates on glass in the kitchen or bathroom due to frequent cooking and hanging laundry.
- There is a big difference between the temperature outside the house and inside.
- Insufficient circulation of warm flows from radiators and heating devices when it is wet outside and damp in the room.
- Wide window sill. Air from the radiator cannot get to the window, and an unheated zone remains in its lower section.
- Violations in window installation. To prevent windows from sweating, you should choose trusted manufacturers and high-quality materials. When saving on double-glazed windows or on installation services, work may not be performed according to standards with sealing violations. When the frame is skewed, the fit of the sashes is damaged.
- Lack of transom regulation. When installing, it is important to focus on the quality of regulation of the window sashes.
- Damage to the structure of the rubber seal. Depending on temperature and time, the material can harden and crumble, which leads to seal failure.
- Clogged drainage holes located under the opening flap. Water flows through the drains from the outside of the window during ventilation; if clogged, excess moisture will penetrate onto the window sill.
Increased dampness renders window fittings and household items unusable. Condensation is the main reason for the formation of fungus on slopes and window sills, which negatively affects the functions of the human respiratory system.
Condensation between glasses, what to do
If condensation at the bottom of a plastic window, or along its entire surface on the inside of the window, is a common occurrence, then fogged windows from the inside are much less common. Most often this occurs due to depressurization of the structure.
Condensation inside the glass unit
This may happen for the following reasons:
- The product was released with a defect . This happens when they want to save money when purchasing and buy windows from an untrusted manufacturer. Another reason may be a violation of window manufacturing technology.
- window damage during transportation . If, during transportation of the product, chips or cracks appeared on the window, the gas or compressed air that fills the space between the double-glazed windows could escape. It could also be possible to remove the layer of sealing sealant.
- if the owner of the windows carries out some manipulations with the product , disassembles them and puts them back together, the gas also comes out, and after assembly it was not sealed back. If a glass unit was disassembled, its original properties were lost in 90% of cases
If condensation begins to form between the glasses, the only solution is to completely replace the double-glazed window with a new one. A professional can replace a double-glazed window in just half an hour, but you can do this work yourself. In addition, a new double-glazed window is not expensive at all.
How to wipe windows to prevent sweating inside in winter
To eliminate condensation, you need to choose the right window demisting agent:
- A wax candle is the most common folk remedy for normalizing the climate in a room. Place several candles on the windowsill so that they continue to burn all day and warm the glass. Due to air convection from the flame, condensation does not settle on the glass. As a result of the combustion procedure, carbon dioxide, which is beneficial for plants, is released, so the greens can be left on the windowsill. Pay particular attention to safety and remove items that could easily catch fire.
- Soap . “Rub” a mesh with small cells on the glass with toilet soap. Smear the marks until shiny with a clean microfiber cloth.
- Glycerin . Combine ethyl alcohol with glycerin until smooth in one container, based on the proportions 20/1. Pour the composition into a spray bottle and treat the glass. Polish any stains dry. When the processing is completed, the alcohol will evaporate, and a thin film of glycerin will remain on the glass for a long time.
- Shaving foam . Squeeze a thin layer of foam or gel onto the glass, wipe with paper or a napkin until it shines.
- Dry windows can be wiped with the pulp of half a cut lemon , after which the surface is treated dry with a towel.
- Salt . A cloth bag filled with salt is placed between the doors. The grains will absorb excess moisture well.
- Toothpaste . Apply toothpaste to a sponge or microfiber cloth and vigorously wipe the glass dry. You can also clean the surface with tooth powder.
Important! It is better to burn thick scented candles that burn for a long time and bring a touch of comfort to the interior of the room.
Anti-fog for cars
Automotive chemicals can be very useful around the house. Anti-foggers for windshields are as effective as folk remedies. They also last longer: on the outside of windows - 1-3 months, on the inside - until the next wash. In addition, they prevent icing, are easier to apply and have a long shelf life (from 2 to 5 years).
Names and cost of funds:
- VERYLUBE – 150 rub. (320 ml);
- Sonax – 300 rub. (300 ml);
- CarPlan – 300 rub. (250 ml);
- Sintec – 110 rub. (210 ml);
- ABRO – 200 rub. (103 ml);
- Eltrans – 110 rub. (210 ml).The method of application is the same as for folk remedies: you need to apply the composition to the glass and after some time rub the surface with a flannel cloth.
Rules for washing windows
Glass with a fatty layer can retain moisture for a long time. To get rid of smudges, you need to properly wash windows using alcohol degreasing.
Best washing methods:
- Wash the glass with soapy water or diluted dishwashing detergent. Wipe with a cotton napkin and remove white stains with a scraper with a rubberized nozzle. Apply alcohol to the sponge, treat the surface and allow the liquid to evaporate.
- A weak saline solution of 4 liters of water and 1 tbsp. l. Spread salt on clean glass. If white streaks appear, they need to be washed and the glass re-treated with a lighter composition.
- In a container, mix a thick mass of 40 ml of potassium oil, 4 g of pine turpentine and 20 g of glycerin. Rub the mixture onto the surface, spreading the mixture evenly over the glass with a sponge. Polish the window with a natural, lint-free cloth until it shines.
- You can rub the surface vigorously with crumpled newspapers, which have a water-repellent effect due to the printing ink.
- If mold has formed around the window due to moisture, it is necessary to remove it immediately and protect the room from reoccurring. You need to carefully go over the fungus with a bleach solution or vinegar to disinfect the surface. Apply a layer of primer on top. Allow the slopes to dry completely and repaint.
How to remove fogged windows in a car
When faced with a problem such as foggy windows, finding the cause is not so easy. If with other technical problems you can use instruments to find the source of the problem, then in this case you should not check all the signs.
Perhaps the reason is just a closed air supply damper into the cabin. For example, we were driving behind an old Ikarus or Kamaz, and to prevent black acrid smoke from entering the cabin, we closed the damper and left it in that closed position. In this mode, air circulates only throughout the cabin, there is no external supply and the windows begin to sweat. Also, the reason that the windows sweat is that the car's cabin filter is dirty. It may also be that a yellow coating forms on the glass, then it definitely needs to be changed; to do this, just find out the location of the cabin filter.
Ventilation rules
Ventilation equipment is an effective solution to the problem of “crying” windows in an apartment.
| Function | Meaning |
| Micro-ventilation | A function that all Eurowindows are equipped with. The window remains slightly open with a thin slit of free space. Thanks to this, fresh air enters the room and does not cause discomfort to the people inside. |
| Window | Unlike wooden ones, plastic windows are rarely equipped with a window. It is better to order designs with a window so as not to interfere with the access of clean air from the street. |
| Combs | An inexpensive device that allows you to regulate the intensity of ventilation. |
| Self-ventilation | It is provided in the frame design in the form of numerous holes under the glass. Through them, fresh air enters the house, mixes with warm air and is discharged through the openings above the double-glazed window. |
Combs for windows
Means for treating foggy glass
To solve the problem of fogging, the automotive industry produces various glass treatment products. They are called anti-fog and anti-rain. They come in the form of aerosols or liquids and are sold in auto chemical stores at an average, affordable price.
Almost any car window defogger is alcohol-based. This is a fairly reliable product that reduces the amount of condensation on the glass and improves visibility during rain. However, there are situations when there is no ready-made anti-fog agent, but you need to go. It’s raining outside, 5 people are sitting in a car, and condensation is constantly forming on the windows. What home remedies can replace auto chemicals?
Useful tips
To effectively combat the appearance of moisture on windows, you can use useful life hacks:
- Installation of ventilation devices or double-action air conditioning to improve the ventilation process in the room.
- If the humidity level is slightly exceeded, place air drying devices on window sills or nearby.
- Using a hood when cooking: combating steam from cooking food will become much more effective.
- Limiting activities that increase humidity: long baths, drying clothes indoors.
- During renovation work, the relative humidity inside the room increases and the windows fog up. To prevent the problem, you need to isolate the window volume. Use construction tape to seal the opening with plastic film. Open the window sash slightly, and the moisture will settle on the film and not on the glass.
To prevent windows from freezing and mold around the frame, it is important to achieve the correct humidity and air circulation in the room.
Anti-fogging with a special film
There is another very effective way to combat the formation of condensation on the surface of glass - this is the use of a special film. It is made of durable, abrasion-resistant polymer material – polycarbonate.
One side of the film has an adhesive base for fixing to glass. The outer layer, due to its hydrophobic properties, repels water. As a result, it rolls off before the glass fogs up.
The film is applied quite simply, but requires special care. The first step is to cut out a piece of material in the shape of a window, but a little larger. The glass surface is cleaned of dust, degreased and dried. Afterwards, the protective layer is removed from the adhesive base and it is pressed tightly against the window. All air bubbles are removed with a special spatula.
Regular soap
If anyone doesn't believe it, try applying it to the windows. This is an old, ancient method that has been working for years (by the way, soldiers used it to treat the glass in gas masks so that they would not sweat).
The principle of application is simple. You need to apply the “mesh” with a bar of soap to the car windows and then rub it well. The composition works reliably, the efficiency is HIGH.
There are also disadvantages - you can only do this in warm weather, because it is VERY difficult to grind such a mesh in the cold
Shaving foam or gel
Personally, I myself use this method and I think that this is the best do-it-yourself anti-fog for the money. And the most important thing is that both are available in almost every home and there is no need to spend extra money on purpose.
Application method - you will need paper towels (gel works better, not much, but still). Squeeze out a little and rub the glass. Next, take a dry towel and treat the surface until transparent.
The efficiency is the highest. Almost no cons
Now watch the video version
In conclusion, I would like to say that these anti-fog recipes will of course help you, but if it’s damp on your rugs and especially under them, you can squeeze it out, then you need to first dry the interior and then treat it, otherwise the effect will be much worse.
You can also advise putting some cat litter in a small bag, say under the seat, it will absorb excess moisture and keep it inside. You need to change it about once a week or two (it will simply swell).
This is where I end, I think my article and video were useful to you. Subscribe to the channel, read AUTOBLOG.
( 9 votes, average: 5.00 out of 5)
Similar news
Evaporation of antifreeze and other causes of its leakage. Let's take the fur off.
The antifreeze (TOSOL) has darkened and turned brown. Why? Let's analyze the wasps.
Do-it-yourself anti-freeze. How to make for a car, methods with spir.
“>
