How to clean concrete dust after renovation

In any room, sooner or later it is necessary to carry out repair work. However, after putting the apartment in order, a thick layer of dust settles on all surfaces, and it seems that it is simply impossible to get rid of it. In fact, cleaning up construction dust after renovation is a completely solvable task. Next we will look at what needs to be done to restore order.

Cleaning Tips

To make it easier to remove dirt later, before starting repairs, cover the entire area of the room with large polyethylene or newspapers. This will make it possible to protect the floor from a large amount of dirt and make it easier to clean later.

If you use special cleaning fluids, wear gloves, as cleaning solutions contain many chemicals that are harsh on the skin.

Carefully scrape off pieces of cement, alabaster and other materials that have dried to the floor using a spatula, then moisten the stains left behind with a damp cloth.

Cleaning dirt from laminate and parquet should be done using only special products intended for these coatings.

Cleaning of the premises should be carried out in the following order:

collect large pieces of construction waste;
use a broom dipped in water to sweep away the bulk of the dirt, starting from the corners;
Wash the floor with a wet cloth using plenty of water;
change the water and rinse everything well again using detergent;
repeat the procedure several times, changing the water frequently.

We wash away contaminants

In order to wash off gypsum or lime dust and various construction-related contaminants remaining after repairs, there are several effective methods.

Construction dust can be easily removed with a vegetable oil solution. Pour a few tablespoons of oil into warm water and stir. Wash the room, then empty the bucket. Then wash everything with a solution with a little vinegar. At the end of cleaning, rinse the entire area thoroughly with clean water.
To clean a room after renovation, use regular salt. First, wash the entire area with water and any detergent. Change the water and add about half a cup of salt to the bucket. After washing with salt, wipe the floor with clean water.
Potassium permanganate (potassium permanganate) will help remove construction dust after repairs. Dilute a little powder in water to create a bright pink color. Rinse the area thoroughly.
In order to remove construction dust, you can use kerosene. Pour about one hundred grams of kerosene into a bucket of water. Wash the entire floor area. If necessary, rinse it again.
You can clean the floor from construction dust using universal surface cleaning products (Domestos, Amway). Dilute the product in warm water according to the instructions. Wash the entire contaminated area. After this, wipe with clean water.
To remove various dirt after repairs, you can use special floor cleaners (Mr. Muscle or Mister Proper). Dilute them as indicated in the instructions and thoroughly wash dirty surfaces. Repeat the operation if necessary.
In order to remove gypsum and lime dust, there is a special cleaning product called Probel, which can be purchased at hardware and construction stores. Dilute it with warm water according to the instructions. Rinse the contaminated surface thoroughly, then rinse with clean water.

Cleaning wooden surfaces

Wooden floors require special care. Very beautiful laminate and parquet flooring requires careful care. If exposed to large amounts of moisture, they may become deformed. To clean such surfaces, use the following methods:

If you have natural wood floors at home, you can remove dirt from painted wooden boards using a solution of ammonia. Dilute it in water at the rate of 1 tablespoon per liter of water. Rinse the wood surface thoroughly.
To clean laminate floors after renovation, use special detergents for laminate surfaces. After using them, it will shine and smell fresh. It is better to use a microfiber cloth to wash such a coating. Do not use too much liquid to prevent the surface from becoming deformed.
You can remove construction dust from a parquet floor using special cleaners for treating parquet, which are sold in hardware stores. Wipe the parquet with a damp cloth soaked in the solution. Make sure that excess moisture does not get on the parquet, as it may deteriorate. After use, do not wash off the solution, as the floor will be covered with a protective film that adds shine.

By using these cleaning tips, you can effectively remove stains left behind after a renovation. Using these proven methods, you will make any surface sparkle clean.

Source

How to remove construction dust after renovation

How to remove construction dust

Cleaning your apartment from construction dust is a matter of not only putting things in order, but also the health of the whole family. After all, small dust particles can cause serious harm to the human body. Getting on the mucous membranes of the eyes and respiratory tract, they can lead to disruption of the functioning of these organs. In addition, if you stay in a dusty room for a long time, small particles can penetrate into the lungs, making it difficult to breathe and causing a cough. Also, some people may experience an allergy to construction dust in the form of redness and itching of the skin.

Cleaning the floor from dust

Most construction dust accumulates on the floor. Therefore, cleaning the room begins with it. Before you start cleaning your apartment, you will need to protect yourself from fine dust, which can significantly complicate breathing and cause allergic reactions. Skin can be protected using special rubber gloves for cleaning. You will need a respirator or dust mask for your face. Removing dust deposits from the floor after renovation includes the following steps:

Fill a spray bottle with clean water and actively spray the room so that small dust particles become heavier and settle on the floor covering.
After an hour, you will need to collect construction dust with a vacuum cleaner. It is permissible to use a regular household appliance. But cleaning will be much better if you use a construction vacuum cleaner. At the same time, you should not bring it into the room, so as not to carry dirt, just extend the hose into the room.
If necessary, vacuum the floor several times until it becomes washable.
At the end of the hygiene procedure, you will need to thoroughly wash the floor. To prevent whitish stains from remaining on it, it is recommended to change the water many times. The best way to clean the floor from construction dust is to change the water every time you rinse the cloth.

Wet broom

It is recommended to use this method in cases where the dust layer is not very large. You need to fill a deep basin with water, moisten the broom generously and start cleaning.

Dust will stick to a wet product rather than rise into the air. After each movement on the floor, the broom should be immersed in the basin again. Periodically, the water needs to be drained and the container refilled with clean liquid.

How to clean after renovation - cleaning the apartment from construction dust

After completion, the stage of cleaning construction dust after repair begins. Even if the work was carried out only in one room, the entire apartment will have to be cleaned. After all, construction dust particles are very small and scatter quickly. It is very important to do this, since the substances from which building materials are made are far from beneficial to humans. Sometimes even dangerous. Therefore, it is necessary to prevent these substances from entering the lungs, and to remove construction dust as soon as possible after repairs.

Main stages of general cleaning

In order to remove dust from your apartment efficiently after renovation, it is important to follow all the main cleaning steps in the correct sequence. If you ignore the order, the dust will spread throughout the rooms again, and such cleaning will be of no use, you will have to do everything again. Cleaning stages:

Immediately after completion of repair work, all large debris is removed. Collected in large bags and tools. Bags should not be stored in the apartment. It's better to take it out of the house right away. Tools must be cleaned so that any remaining dust on them does not fly around the apartment.
After large debris has been removed, you can proceed directly to cleaning up construction dust after repairs. First you need to remove the curtains and remove all free-standing decorative elements, flower pots, carpets, and so on. They are washed and cleaned separately. All non-woven items are immediately wiped with damp towels.
Next, you need to make sure that the dust settles. To do this, spray all surfaces with water from a spray bottle. This includes working on the ceiling, walls, all shelves, window sills, furniture, baseboards, and so on. Dry dust rises from the slightest movement or blow of wind. Therefore, you must immediately close the windows and doors. While cleaning, you can continue to spray surfaces to prevent them from drying out.
It is best to use a vacuum cleaner to remove dust after repairs. A broom or squeegee only raises dust, and it will settle again. In addition, it is more convenient to use a vacuum cleaner to clean walls, furniture and ceilings.
After the construction dust has been vacuumed, it is necessary to do wet cleaning. This process will need to be repeated at least 2-3 times. You should start by treating with plain water. Water and matter need to be changed as often as possible, this way there will be fewer stains. Then let the water dry and walk again. For the third time, you can add detergents to remove all the stains.
Finally, everything that was taken out at the very beginning is washed, washed, cleaned and returned to the already clean room. Now you can hang the curtains and open the windows.

One of the most important principles for cleaning construction dust is that at all stages cleaning is done from top to bottom. You should start from the ceiling, then move lower. Dust from the ceiling and furniture falls onto the floor, so it is always removed last.

Floor cleaning

The floor is washed last, when all surfaces are cleaned of dust and all dust has fallen off. Necessary:

First, use a large rag to collect everything that might have fallen. Particular attention should be paid to baseboards, corners and the space under the radiator and furniture. The more thoroughly this stage is completed, the less effort will have to be made further.
Then wash in small areas again, constantly rinsing the rag. You will have to repeat twice.
At the end, for shine, they are treated with a product suitable for the specific floor for parquet, laminate, tiles, and so on. Detergents are used only on the floor, on the walls only if there are tiles on them.
After this, all surfaces must be allowed to dry.
At this time, curtains, carpets and all other items are washed.
When the floor is dry, you can put everything back.

A few simple rules will help make cleaning up construction dust after renovation easier, faster and more efficient:

If during repairs you cover all unused surfaces with construction film and seal the edges with paper tape, after the film is removed, less dust will remain.
Cleaning is done throughout the entire apartment. You need to start in the room farthest from the exit.
The first steps (taking out the trash and vacuuming) must be done everywhere at once. Continue from one room to another, making sure to close the doors.
When cleaning, it is better to work in rubber shoes that are easy to rinse or shoe covers. Constantly change them as they become dirty.
When the cleaning of construction dust after renovation in a room is completed, no more people enter it until the cleaning of the entire apartment is completed.
In the days following cleaning, the dust will still gradually settle. Therefore, it is advisable to walk over surfaces with wet wipes or damp cloth during the first week. Do wet cleaning of the floor.
Having a humidifier will also help. Wet dust particles will settle on the floor rather than in your lungs. This is especially true for allergy sufferers and asthmatics.

Repairs are always associated with a huge amount of debris and post-repair work. None of them should be skipped to get the desired result. Cleaning is a monotonous and labor-intensive process, but it brings the result to perfection. After all the work done, you can finally enjoy the cleanliness and updated interior.

Necessary tools and cleaning products

Before starting general cleaning, you need to prepare what to use to remove dust after renovation in the apartment - cleaning products and tools. It is better to prepare everything you need with a reserve. After all, it is advisable not to leave the room while cleaning so that dust particles do not fly away. Necessary:

In order to collect and remove construction waste, you will need gloves, a respirator and many large bags.
It is better to first put curtains, carpets and other items in bags or boxes and cover them with film. Place those items that have already been wiped with a damp towel separately from dusty curtains, carpets and other textiles.
To spray dusty surfaces, you will need a spray bottle with a fine spray.
Of course, the king of cleaning is the vacuum cleaner. To remove construction dust after renovations, you need an option with high suction power.

You cannot vacuum construction dust with a regular vacuum cleaner. Also, in addition to power, it is important that the waste collection container is made of plastic or paper. Fabric will not work. A construction vacuum cleaner will do the job perfectly. You don't have to buy it - it's quite expensive. Can be rented. If this is not possible, you can vacuum up construction dust with a powerful home vacuum cleaner.

For wet cleaning you will need:

Water containers.
Rags, sponges, pieces of cloth (cotton). Rags made from so-called “smart” material are also perfect. The dust particles seem to stick to it and do not scatter throughout the room.
Detergents for floors, windows (alcohol-based) and walls.

If there is wallpaper or paint on the walls, the product must be appropriate. For tiles, the same as for windows is suitable. The most important thing here is that you can never have too many rags and water. It is necessary to change and wash as often as possible.

Plumbing treatment

Plumbing fixtures that are dirty during repairs are cleaned using rubber gloves. Fresh dirt can easily be washed off with plain warm water, but during repairs, rarely does anyone undertake to immediately wash something dirty.

If the surface of the plumbing fixtures is metallized and chrome-plated, you need to overcome the temptation to use acid-containing products: leave them on ceramics, and various unsightly stains will appear on the metal from such cleaning.

If stains of paint and glue have hardened on an enamel bathtub, you will have to replace the enamel layer. They can no longer be removed without leaving a trace.

An acrylic bathtub cannot be washed with abrasive agents. It is better to study in advance the list of compounds suitable for cleaning it.

Cleaning surfaces from dust

To clean dust from surfaces after repairs, you need to act in stages. Namely:

The surfaces are preliminarily slightly moistened by spraying water and a fine spray.
Then collect the dust with a vacuum cleaner until the surface is dry.
If the space is large, you can repeat the spraying.
After this, the residues are collected with a damp cloth, which is rinsed in water each time and wrung out well. Because drops of water leave stains.

It is important that the material is clean and damp so that dirt does not spread and there are fewer stains.

When there is no more dust on the surface, go over it with furniture polish to give it a clean shine.

If furniture gets dirty during renovation

It’s so nice when, after renovation, you can bring brand new furniture into the room, still wrapped in film. In this case, we simply install pieces of furniture in the desired places and enjoy the work done.

And if the furniture remained in place during the renovation, then even covered with a protective film, it could still get dirty.

A vacuum cleaner is indispensable when cleaning furniture: everything is thoroughly vacuumed using the attachments designed for this purpose.

Old furniture does not always look good after renovation. Somewhere you will need to remove a stain, or even replace the upholstery.

Purchase products for cleaning textile, leather and wooden surfaces

Grease stains are removed with compounds containing alkali, or, conversely, with acids (for example, citric). Regular milk will help with many stains: it will push dirt from the deep layers of the material out.

In addition to upholstered furniture, all cabinets and shelving are vacuumed and washed: inside and out.

Cleaning wallpaper, walls and ceilings from construction dust

In the case of cleaning wallpaper, walls and ceilings, as well as surface treatment, you first need to make the dust damp. Cleaning stages:

Treatment with water is done on all surfaces at once so that dirt does not fly away. If it starts to dry out, repeat the treatment with water again and again.
Cleaning construction dust after renovation always starts from the ceiling. After all planes and surfaces are moistened, a vacuum cleaner comes into play. They start, of course, from the ceiling. To make it more convenient, you can stand on a stepladder.
It is also better to wear goggles and a respirator. Since dirt from the ceiling will fall down.
Next, they vacuum the walls, trying not to miss anything, and the floor. During the process, you can additionally spray with water to prevent the surfaces from drying out.
Then all surfaces are washed with a damp cloth. For the ceiling, you can use a mop with a long handle, or stand higher. The procedure is repeated several times. The rag should be washed as often as possible, just like changing the water.
To clean the wallpaper from dust after repair, use a slightly damp cloth so as not to damage the pattern. The main thing is that the water does not drip and does not leave streaks.
The same goes for washing non-woven wallpaper after renovation. Even if the wallpaper can be washed, you should not overdo it with moisture. Otherwise they may move away from the wall.
Along with the walls, the windows are also washed, only from the inside.

In the latter case, the steps are the same, but at the end it is better to use an alcohol-containing glass cleaner to avoid leaving streaks.

The best preparations for removing whitewash

Concentrated detergents that are specifically designed for washing floors effectively remove whitewash. They are quite economical - 50-60 ml of product is diluted in 5 liters of water.

They cope not only with stubborn dirt, but also with unpleasant odors. They foam well, add shine to the floors and do not leave streaks.

The products are applicable to any surface:

tile,
parquet,
linoleum,
laminate,
tree.

The best in terms of price and quality ratio:

"Mister Muscle". Price for 500 ml – from 115 rubles.
"Mister proper". Price for 1 liter – from 147 rubles.
"Frosch" Price for 1 liter – from 237 rubles.
"Domestos". Price for 1 liter – from 178 rubles.

The better the detergent is diluted, the more effective the result will be. Therefore, foam it under a powerful stream of warm water when you fill a bucket from the tap.