Sometimes recently purchased air mattresses begin to lose their appearance immediately after purchase for unexplained reasons. There are several explanations for why an air mattress deflates if there are no holes. After prolonged use, deflating is natural, but in some cases it may indicate a malfunction.
A deflated mattress can be repaired if you find the cause of the air leakage.
What is better mattress Intex or Bestway?
Considering the positive and negative aspects of these brands, we can come to the conclusion that they both deserve attention. Answering the question: “Which is better: the Bestway or Intex mattress?”, most experts recommend giving preference to the first.
Interesting materials:
How much money goes from 1xbet to the card? How much money does it take from the card to the current account? How many cards should there be in UNO? How many cards of the same suit are in a 52 deck? How many cards of spades are in the deck? How many cards are there in blitz? How many maps are there in Hearthstone 2022? How many cards are in a royal flush? How many cards are there in table lotto? How many cards are there in Scholomance?
Why does a mattress deflate if there are no holes in it?
It happens that even after the first use, a new air mattress may turn out to be faulty.
Poorly closed valve
You can check how well it is twisted using a soap solution. It must be applied to the place where the air is released, and if bubbles appear, tighten the valve more tightly. If to no avail, the valve should be replaced with a new one.
On some mattresses, the valve can be a weak point.
Defective goods
Another reason that the mattress deflates quickly may be a manufacturing defect. In this case, the product must be exchanged under warranty or returned to the seller. To do this, you need to take a receipt with you. It will be considered proof that the goods taken were purchased in this store.
Can an Intex air bed deflate?
In the process of using air beds, their owners may encounter situations when the product begins to gradually lose its volume and release air, or, in simple terms, deflate.
As a result, a person who uses such a product begins to experience some discomfort while sleeping. And he has to fill the bed with air again from time to time in order to give it the necessary rigidity and elasticity.
Naturally, the owners of such products are interested in whether it is normal for an air bed to deflate and what should be done in this case. To answer this question, it should be noted that it depends on how often you have to re-inflate it.
For example, if a bed begins to lose volume a few weeks after you start using it, then this is considered normal.
The fact is that the air inside the product can gradually escape through microscopic holes in the polyvinyl base of the product. As a result, the bed becomes less comfortable to use and loses its rigidity.
Therefore, it is important to periodically pump it up as it is used.
. The most convenient way to do this is with the help of a proprietary manual application from Intex.
In addition, it is very good if your bed is already equipped with an automatic electric pump, because you will not need to take any action.
But you need to remember that if your air bed deflates too often and very quickly, then this is no longer the norm. In this case, you need to find the cause of the defect and try to eliminate it.
Why does an air bed deflate?
Let's say you went to sleep on a fully inflated bed, but woke up to find that it was already more than half deflated. This could happen for various reasons. The most common is the appearance of a small hole in the product through which air escapes. The hole can be very small, which makes it difficult to find it by sound or external signs.
More often
Such damage occurs on air beds due to careless handling or when the product comes into contact with pets. For example, your cat’s claws could easily perforate a thick layer of polyvinyl chloride. Therefore, the manufacturer recommends covering the airbed with a protective blanket or other materials if there is a risk of damage due to contact with animals.
Another reason
- This is a manufacturing defect. Unfortunately, it occurs in almost any area of production. If you just recently bought an Intex air bed and noticed that it has started to deflate, then you can return or exchange it under warranty. To do this, it is important to keep the original sales receipt of the store where you purchased the product.
What to do if an air bed deflates?
If your bed is not under warranty, you can try to repair it yourself by repairing the damage. First you need to find the place where the puncture is located. To do this, you can use soapy liquid or simply place the product under water. Having determined the location of the leak, it is necessary to glue a patch made of durable rubber material onto it. To do this, it is best to use household superglue, which is sold in stores.
What to do?
If your problem is related to a manufacturing defect and you have a warranty for the product, exchange it. Contact the store where you purchased the products. You must have a sales receipt with you that confirms your purchase. If there is no receipt, it will not be possible to prove the fact of purchasing the goods in this particular store. However, manufacturing defects are very rare and often damage is associated with other circumstances that can be avoided.
You can protect your mattress from the claws of your beloved pets by simply covering the product with a blanket or other dense material.
Valve tightness check
How to determine how tight an air mattress valve is? To do this, prepare a soap solution. Additionally, you will need a soft bristle brush or a regular piece of cloth to test.
First, it is recommended to clean the air cushion valve from dust, small debris and rinse with water under pressure. In some cases, even such actions can improve the tightness of the device. After all, the mattress valve in a sense acts like a vacuum cleaner, sucking up the clog from the outside. So, between its shells there may be layers of dust, hair, threads, etc. It is debris that most often causes the valve of an air mattress to leak.
After cleaning, it is worth immersing the product, previously filled with air, in a soap solution. If fluid begins to bubble around the valve, an obstruction is causing the leak. In this case, it will have to be repaired or replaced.
How to repair an air mattress if small holes appear on it
Some mattresses come with glue and a special spatula, but you can also do it without them. It is better to apply glue to the patch in a thin layer for strength.
Surface treatment
Before gluing the patch, the area around the puncture must be wiped with alcohol, acetone or gasoline. Before doing this, deflate the product and dry it thoroughly. If the damage is located on the velvet side, apply solvent to the desired part and carefully sand it with sandpaper.
Preparing the patch
The patch should be rubber. To make it yourself, the following items are suitable:
- rubber toy;
- old inner tube from a wheel;
- rubber for tire repair;
- another damaged mattress.
Cut the patch into a circle shape. In case of severe damage, it should be glued on both sides. This will provide a more effective result.
The patch must be pressed tightly to the surface.
Tape
The instructions for gluing are very simple:
- Apply glue to the surface of the mattress and the patch itself. You need to act carefully so that the glue does not end up inside the product.
- Place the patch on the hole, press and wait for the time specified in the manufacturer's instructions.
If the instructions indicate that the product should be placed under a press for several hours, you should do so.
How to properly inflate a bed
In order for the bed to last for a long time, you need to know some of the features of its operation. After inflating, the product should remain slightly soft and wrinkle a little. The load on the mattress should be distributed evenly. To do this, you can lay a thick blanket on top of the mattress. Constant uniform load distribution will extend the service life of the product.
The weight of sleeping people must also be taken into account. If people weighing up to 70 kg sleep on the bed, when using an electric pump, you need to wait until it starts to run dry and then turn it off. If the weight of the sleepers is more than 70 kg, after pumping, you can deflate the air a little, making the bed softer. The body puts pressure on the air inside the product, so the bed will become firmer and people will be comfortable.
We inflate the mattress according to the rules
How to inflate an intex mattress? Electric pumps cope with their task in the shortest possible time, but the pumping process should be carefully monitored - excess air can easily damage the mattress. A well-inflated mattress is elastic and without folds, it should be comfortable - so adjust the firmness of the sleeping area while inflating.
Important! Want to check the reliability of your mattress? Inflate it and leave it for 12 hours - during this time the loss of elasticity should not be more than 10%.
Valve tightness check
How to determine how tight an air mattress valve is? To do this, prepare a soap solution. Additionally, you will need a soft bristle brush or a regular piece of cloth to test.
First, it is recommended to clean the air cushion valve from dust, small debris and rinse with water under pressure. In some cases, even such actions can improve the tightness of the device. After all, the mattress valve in a sense acts like a vacuum cleaner, sucking up the clog from the outside. So, between its shells there may be layers of dust, hair, threads, etc. It is debris that most often causes the valve of an air mattress to leak.
After cleaning, it is worth immersing the product, previously filled with air, in a soap solution. If fluid begins to bubble around the valve, an obstruction is causing the leak. In this case, it will have to be repaired or replaced.
How not to inflate a mattress
If you went out into the countryside and only there realized that the pump had failed or the device was left at home, do not rush to pump the product with exhaust gases. At first glance this may seem like a great idea. If you inflate the product in this way only once, nothing “deadly” will happen. But regular inflation of the mattress with exhaust gases can result in the destruction of the inflatable product.
The fact is that carcinogens have a detrimental effect on the structure of the material from which mattresses are made. In addition, during pumping, the person managing the process will inevitably inhale some of the carcinogens, which can be very harmful to health.
Repair of inflatable product
Manufacturers of Intex air mattresses offer various repair kits. According to the instructions, you can easily repair your mattress and continue to use it for its intended purpose. If there is no such kit, then you can fix the damage yourself at home. The main thing is not to apply too thick a layer of glue; it will take a long time to dry and will not provide a strong connection. To ensure that the cause of the mattress deflation is eliminated, you need to do the following:
- Lay out the mattress on a flat and smooth surface.
- You need to apply a patch to the damaged area and outline the outline.
- The patch is cut 2-4 cm larger than the damaged area.
- The glue is distributed in a thin layer over the puncture site and onto the patch. You need to wait a little until it dries and apply a new layer. When the second layer dries, you can glue it.
- After gluing, you need to place a weight on the patch so that all edges are evenly glued.
- The repaired mattress is left for 24 hours until the glue has completely dried.
After repair, the mattress can be used as before, but do not forget about safety measures and take care of it. With proper care and conservation, the air mattress will delight you for many years.
Where to start
So, how to inflate a mattress without a pump? The first thing that usually comes to mind is using the power of your own lungs. It is quite possible to pump up a small model without the use of additional equipment or devices.
Reference! Two adult men can inflate a mattress this way in about 20 minutes. When changing, do not forget to disinfect the valve hole!
However, it is worth understanding that for one person this is a rather complex process. Untrained lungs and heart can fail. The result is dizziness and increased blood pressure. In addition, it is unlikely that it will be possible to inflate the product to the optimal degree of density using the lungs alone.
How to pump up after repair?
Since the bed is always deflated before repairs, after repairs it must be inflated again. You can do this in the following ways:
Repair or throw away: expert advice
In conclusion, here are some general tips:
- If you don’t have patch material on hand, small punctures can be covered with a “liquid patch.” This product is applied to the surface, and after drying it forms a durable polymer layer that will allow you to use the mattress 2-3 times, and if the product is good, even longer. When using a “liquid patch”, you do not need to clean the velor side of the lint.
- If there is nothing at all, and you need a bed right now, then small punctures can be temporarily sealed with tape. Such a patch will allow you to sleep through the night more or less peacefully, but after that you will have to do normal repairs.
- A common cause of deflation is a valve malfunction. Here are the most possible problems. You can replace the rubber gasket, but if the valve body itself is cracked, all that remains is to replace it entirely and throw away the old one.
Source
Why does an air bed deflate?
Inflatable beds from the manufacturer Intex are in great demand among buyers, as they combine several important advantages.
When deflated, they take up very little space, so they can be stored in a closet or a specially designated place. Light weight and compact dimensions allow you to take this bed with you on a trip or short trip. And if necessary, in just a couple of minutes it turns into a convenient and comfortable sleeping place.
Air beds are often used as a backup option in case guests decide to stay overnight. They are also purchased by those who want to get a comfortable and spacious place to sleep and relax for little money.
Cause of loss of pressure in the mattress
The manufacturer claims that a gradual loss of elasticity is normal, but only if the mattress needs to be inflated no more than once every two weeks. During operation, the device can indeed lose elasticity through small holes in the polyvinyl base.
Attention! To pump air, it is recommended to use a proprietary Intex hand pump.
For the most demanding consumer, bed models equipped with special electrical equipment are available.
But what to do if the product deflates too quickly? You should be wary when an air mattress deflates overnight. The most common reason for this is the occurrence of holes. Often the holes in a product can be so small that it is not possible to see them. They are usually formed due to neglect, or due to contact with pets.
Important! A blanket or thick material covering the air bed will help protect the polyvinyl chloride surface from the claws of your beloved pet.
Factory defects can also cause loss of elasticity. The solution to the problem in this case may be to return or exchange the product under warranty. To contact the service center, the buyer must keep the sales receipt confirming the purchase of the product.
Pumps for inflating mattresses
A mattress is a fairly large and voluminous item. In any case, you can't inflate it with your mouth. The best solution to the question of how to inflate an air mattress is to use a pump. Sometimes the pump may be included - from the same manufacturer. If not, you will need a low pressure pump:
- manual;
- foot;
- electric.
An electric pump is justified if you have constant access to energy - in the house or at least from a car battery. If not, then choose a foot pump.
Advantages of INTEX glue
People often ask what glue to use to seal a PVC air mattress? By and large, any one designed for gluing rubber or PVC products will do. You can use desmocoll, an adhesive for repairing air mattresses that contains natural rubber.
The reliability of the connection will increase significantly if you use a certain technology. To do this, apply desmokol to the parts to be glued, wait until the glue dries, after which the dried layer is heated with a hot hairdryer and both parts are pressed firmly.
But it is logical to assume that the best glue for intex mattresses is the one that is produced under the same name, that is, the proprietary glue of the INTEX company. The repair kit includes several types of patches and the glue itself.
Those who have already tried intex glue in practice claim that it reliably glues not only mattresses, but even inflated swimming pools. The patches last for several seasons.
Basic rules for deflating mattresses
First of all, it’s worth recalling a few basic rules:
- perform deflation only on a flat surface;
- Avoid having sharp, piercing or cutting objects in close proximity to the inflatable product;
- do not place heaters with high surface temperatures close to the mattress;
- do not use a regular air mattress at sub-zero temperatures;
- Do not use a car compressor or other pumps not suitable for this purpose for deflation.
DOMOSTROYPlumbing and construction
The popularity of air mattresses is explained by their compactness and ease of use. Today, the demand for them is growing steadily. When folded down, it takes up very little space and can easily fit into a closet or dresser drawer. Owners often prefer to have this product as an additional bed. In addition, an air bed is an indispensable attribute of a trip to nature. It provides a comfortable sleep away from the bustle of the city.
If necessary, the mattress can be moved or lowered without any problems, removing it from prying eyes. The undeniable advantage of the product is its affordable price; even a person with a very modest income can afford the purchase.
It happens that during operation, the owner begins to notice that the inflatable bed that has served him faithfully is gradually losing volume, deflating, releasing the air pumped into it. Sleeping on such a sleeping place brings significant discomfort; the product has to be pumped up frequently, as a result of which a person does not get enough sleep and feels exhausted.
In attempts to restore the device to its former elasticity, users are often interested in: “What to do if an air mattress deflates?” You can find the answer to this in the article below.
Another way to repair a mattress if it deflates
If the product is deflated due to a faulty valve, and not the appearance of holes in it, you must proceed as follows:
- Unscrew the valve.
- Clean all surfaces and remove dust.
- Remove the rubber gasket, then sand the end part.
- Lubricate the inside of the valve with vegetable oil.
- Assemble the valve and screw it into place.
To prevent the mattress from deflating and holes appearing on it, it should be stored in a special cover. This will ensure product protection. During deflation, it is not recommended to squeeze the mattress to speed up the process. The product must be kept away from sharp objects and animals, and not inflated too much. In this way, the service life can be extended by several years.
How to find damage?
The very first thing you need to do is carefully examine the seams of the product; most often, damage begins precisely at the joints of the horizontal surface, internal ribs or at the head of the mattress. The reason is that the product is inflated too much. If no damage is found at the seams, then there may be cuts and punctures on the bottom of the mattress. If they are large, then finding them will not be difficult. If they are small, you will have to carefully look for damage. To find such small holes you need to use one of the options below:
- Lightly inflate the mattress and try to identify the puncture by sound. Afterwards, you can wet your hand and rub your palm over the surface. There is a puncture in the place where the hand is hit with cold air.
- Spray a soap solution from a spray bottle onto the inflated mattress. Soap bubbles will help find damage.
If you find no damage to the surface, then there may be a problem with the valve. To check if everything is okay with him, you need to use shaving foam. Apply a little shaving foam to the valve. If bubbles appear, it means air is coming out of the valve. This can be corrected as follows: remove the valve, take out the rubber gasket, sand the end of the valve with fine sandpaper, and apply a layer of glue.
Source of the article: https://intex-land.com/chto-delat-esli-naduvnoj-matras-sduvaetsja/
Summing up
When choosing a mattress model, decide on your needs
. In any case, pay attention to the quality of the product, the reputation of the manufacturer, the characteristics of the product (the question: how to deflate an air mattress is not the last on the list of characteristics). Customer reviews can be a great help in choosing the right model.
For budget models, choose those that have an additional valve that prevents deflation
(even with the lid open). This will allow you to feel calm on the water, and using an inflatable product at home there will be no risk of waking up on a half-deflated mattress.
While pumping air, you should carefully monitor the elasticity. An overinflated mattress may become unusable due to a split seam. Some of the air from the pumped product should be released (before you start using it), thereby reducing the pressure
A built-in or electric pump with an air blowing function is the best option for large-volume and regularly used products. The disadvantages of such devices include high cost, greater weight of the product, and the need to connect to an electrical network.
What will it take to find a hole?
There are several methods for quickly detecting damage. First you need to collect the bedding, inflate the mattress tightly and put it in place so that you can walk freely. The following tools will help you find out where the hole is in an air mattress:
- soap solution, shaving foam, dishwashing detergent (you need products that are safe for foaming polymer products);
- containers for its cultivation;
- sponges, rags for applying foaming compounds or a spray gun;
- moisture-resistant marker to indicate the cut on the surface;
- culinary film
All this is available in any home. Using available tools, you can quickly find a hole in an air mattress.
How to deflate a sleeping place correctly
When inflating, you can use a special pump or some available means, but in order to deflate the mattress you need to create certain conditions and put in a little effort. Regardless of the brand of the product, the principle and rules for deflating a bestway, Intex or any other mattress are the same.
First of all, we will consider those factors, the presence of which will help to lower the product correctly:
- Smooth surface.
- No sharp objects.
- Lack of heating appliances.
- It is strictly forbidden to use automobile compressors or other devices where high pressure is present.
Inflatable upholstered furniture, especially mattresses, are in steady demand. Expensive air mattresses are usually equipped with a pump (built-in or a separate item). In other cases, the device is purchased separately. What to do if the pump fails, is lost or forgotten, and the product definitely needs to be inflated?
? How to seal a flocked surface?
You need to clean off the flock around the puncture.
Otherwise the patch will not stick. You can try to wipe off the flock layer with a cotton wool soaked in solvent. You can carefully, without pressing, remove the flock with a nail file, fine-grained sandpaper or a file. The main thing is not to damage the fabric itself. Then proceed in the same way as in the case of a regular (non-flocked) surface - read the article about repairing inflatable furniture.
An intex air bed with a built-in pump deflates what to do
What to do if the mattress deflates overnight?
The air mattress can deflate minimally during daily use. Due to small holes in the material. Manufacturers believe that this is absolutely normal, even if the mattress has a built-in pump. This factor will not protect the product from gradual loss of elasticity. To eliminate this type of deflation, inflate the mattress 2-3 times every two weeks.
If the inflatable product completely loses its shape overnight or within 5-8 hours, then periodic inflation will not help. You need to find out the reason why this happens and solve it.
Have you just bought a bed and it begins to lose volume in 2-3 hours? It's all about a manufacturing defect.
Do you have a pet? They can pierce the product with their sharp claws.
Garden hose method
The equipment is suitable for use on a summer cottage, an area near a private house. To find leaks you will need:
- large area of free space;
- rubber hose;
- access to water supply (external tap, well).
The hose is connected to a water tap or lowered into a well using an electric pump. First, the mattress is inflated until it is elastic. Lie down on a flat surface. To avoid repeated punctures (from grass, stones), it is necessary to install an elastic band.
A directed flow of water under low pressure is supplied through the hose. Slowly water the surface and observe. A small hole releases air every 5 seconds. The location of the puncture points will be indicated by a quiet hissing sound and the appearance of bubbles.
Diving underwater
How to find a hole in a mattress by placing it under water:
- Partially inflate the product so that it can be submerged under water.
- Do it in parts. You can use the bath, swimming pool, river.
- Squeeze out the recessed area and observe the reaction. The air flow coming out of the puncture will turn into bubbles under water.
- First inspect the valve, then the seams, then the rest of the surface.
- Trace the cut with a marker.
- Dry and repair the mattress.
Before using this method, read the instruction manual for the accessory. Some materials cannot come into contact with large amounts of water.
