How to deflate an air mattress: quickly yourself without a pump and with a built-in pump

08/19/2018 Category: Air mattresses

1 Basic rules for deflating mattresses
2 Deflate the mattress correctly
3 Valve differences
4 We work with a pump
5 Summing up
6 Videos

How to deflate an air mattress? At first glance, it seems that deflating a mattress is much easier than inflating it. However, this is not quite true. Unlike a small ball or balloon, a mattress is a much more voluminous product, which can be tall, double, or bulky. The procedure for deflating impressive pieces of “airy” furniture requires even more time and effort. Knowing some of the nuances and rules will greatly facilitate the task of deflating.

Peculiarities

An inflatable mattress is a comfortable, mobile version of a bed for sleeping and relaxing. A complete alternative to a bed. An excellent flotation device for swimming in the river or sea.

In the field of medicine, an inflatable anti-decubitus mattress is used for bedridden patients, which helps a person spend time in a horizontal position and prevents the formation of ulcers and wounds on the skin.

A self-inflating mattress is indispensable on a camping trip or a trip to nature.

Each inflatable item is supplied with brief instructions for use and storage. Proper use of the item extends its service life. Peculiarities:

release air only in acceptable ways that cannot damage the item;
carefully inspect the item in an inflated state. This makes it easier to detect cuts, tears, and dents on its surface;
Use safe chemicals for cleaning. A solution of warm water and laundry soap is best. Do not use cleaning agents with aggressive compositions or alcohol solutions to avoid damage to the surface of the inflatable item;
then dry the product naturally;
After opening the valve, air will flow out of the object evenly, do not speed up the process by applying intense pressure with your hands. Intermittent, non-rhythmic jerks can damage the item;
fold the mattress correctly, straighten folds and creases. Keep the item in the container or packaging intended for it;
keep it clean. After each use, carefully remove dirt and foreign objects;
Protect from sharp claws of pets. If you use the mattress as a bed, cover it with a blanket, a blanket, and keep it in a cover;
fill the item with oxygen by 80-85%. Do not jump on the surface, avoid sudden movements. This will help protect the valve (plug) from damage.

Pumps: classification

At first glance, the deflation procedure should be simpler than pumping with air. Unfortunately, the experience gained from inflating balloons turns out to be incorrect in this case. An air mattress, and especially a bed, is a very voluminous product, and it has only one hole for supplying and removing air, and the air comes out of it reluctantly, slowly and unevenly.

Pumps can help remove air, but not all.

Mechanical - that is, hand and foot, which require force to operate. As a rule, foot versions, for example, intex mattress pumps, are equipped with a second air chamber, which allows deflation to be carried out in a much shorter time. Manual versions do not have this advantage; in this case, air exits naturally through an open valve.
Electric pumps from well-known manufacturers - intex, nordway, comfort quest, include the "Blowing Air" function, which makes the removal procedure simple and easy - just press the appropriate button. The photo shows a sample of an electric pump.

Whether the required function is available or not also depends on the type of device.

Pumps can be integral with the product, such as camping pumps from Intex and comfort quest. In this case, the deflation function is mandatory for both mechanical and electrical devices. In the first case, air removal occurs more slowly, due to its simple release from the opened hole. In the second, an electric device ensures high speed of the procedure and complete uniform removal. After blowing, the air mattress easily rolls into a tight bundle without any effort.

If we are talking about a built-in mechanism, then pressing and twisting the product is strictly prohibited, since the risk of damage is much higher.

The pump can also be a separate device: in this case, the choice of whether the deflation function is required or not is left to the buyer. As a rule, manual options without this option are preferred when the mattress is intended to be used constantly, for some time, for example, during a sea holiday. If we are talking about the periodic need to inflate and deflate, for example, on a hiking trip, then you cannot do without the deflation function. At the same time, companies produce special versions of electric pumps that can operate not only from the mains, but also from a car cigarette lighter, battery, and even batteries.

Basic deflation methods

There are several basic options for deflation. It is convenient and safe to bleed air using a mechanical foot pump, hand pump, household vacuum cleaner, electric built-in pump, manually, naturally.

Attention! Inflate or deflate an inflatable product? The correct word to use is "blow away". In the orthography of the Russian language, there is no prefix in the form of the letter “z”.

Original foot pump

Release air using a mechanical foot pump freely and quickly. You just need to use physical force. Algorithm of actions:

open the valve, insert the pump hose or adapter into it, connect tightly;
secure the connection with adhesive material (adhesive tape, electrical tape);
press the pump chamber with less force than when inflating. In this case, reverse thrust is formed;
air masses will be drawn into the apparatus and exit through the pump.

How to deflate an air mattress with a pump

Bleeding air from an inflated specimen using a pump is the easiest and most reliable way to help avoid mistakes. Most models bestway, pavillo, Intech are equipped with built-in electric and mechanical pumps with the necessary automatic deflation option.

A mechanical pump complete with an adapter also speeds up the process.

Before venting the air, inspect the item from all sides for damage and dirt. Wipe the surface with a damp sponge soaked in soapy water or another detergent. Algorithm of actions:

open the valve. Under the influence of pressure, the air masses will come out on their own;
connect the pump to the valve. Seal other additional openings (if any) tightly;
start the pump. Electric or manual draft will release the remaining oxygen to the outside;
disconnect the pump, close the valve.

Carefully fold and pack the item in a container until next use.

Home vacuum cleaner

This household appliance is designed to suck dust, dirt, and small debris inside itself. Equipped with a built-in motor, it can easily replace the pump. Suitable for freeing an inflatable item from excess air masses.

A home vacuum cleaner is equipped with a long hose, a device for pumping air inside, and a blowout hole for releasing it outside. Connect the vacuum cleaner hose to the open hole of the rubber thing, secure it tightly together. Turn on the vacuum cleaner at low speed and slowly pump up the air.

Slow bleeding will protect the structure and mattress material from damage.

Manually

A reliable, but more labor-intensive way to release air masses can be done manually. You will have to spend some time and your own physical strength on the etching process. Algorithm of actions:

open the valve, leave it open, wait until the air comes out naturally;
if the design of the plug is double, lightly squeeze it, the jumper will bend and free the exit for lowering;
Squeeze out the remaining air with your hands, gradually smoothing the surface of the object.

Roll up the product and place it in a packing bag or bag for further storage.

Deflating an air mattress naturally

The inflatable product can be deflated naturally, without the use of additional physical force. The action will take some time. Models with a valve simply open, the air masses will gradually come out. Squeeze out any remaining oxygen by rolling the item into a roll.

Attention! Roll the item into a roll without additional pressure on the seams or partitions. Straighten the material into an even strip and repeat the procedure several times.

What information is needed about the mattress?

When talking about how to deflate mattresses, it is necessary to point out that there are models of mattresses that are already equipped with an auxiliary valve that will not allow air to escape, even if the lid is accidentally opened.

To release air from this type of mattress, you need to press on the valve with your fingers on both sides. In this case, the hole will be open to freely release all the air from the product.

Mattresses with air release valve

For example, with the INTEX FULL CLASSIC DOWNY BED mattress there is such a valve. This mattress is suitable both for home and for outdoor recreation and swimming. A comfortable mattress with wavy lines will ensure a reliable and sound sleep for its owner. It does not require special care due to its unique composition. Transportation is carried out in a case. This model is universal for any, even extreme, recreational conditions.

With a built-in pump, the deflation process is greatly facilitated. There are electric pumps on sale with a mode that will ensure rapid release of air. The instructions included in the kit will help you deflate the mattress using a pump (insert the pump into the hole itself and turn on the mode you need).

For those who are interested in how the mattress deflates, we inform you that the kit is equipped with a mechanical pump along with an adapter, which is precisely involved in the deflation process. The pump facilitates the use of the mattress from the moment of purchase. It can be manual, foot or electric. But you can purchase such a product immediately with the above mattress. It is distinguished by its extreme strength, durability and practicality. Its owner will be delighted with a calm and relaxing sleep somewhere on the lake.

How to deflate a boat

Inflatable boats, dinghies, and mattresses are classified as swimming equipment. After using them on water, the air must be completely purged from them.

A rubber boat is heavier and larger in size than a rubber mattress. But it's easier to blow it away. Small boats, rowing boats, motor boats, PVC boats have several built-in compartments isolated from each other, which involves the alternate removal of oxygen from each compartment. The best option in this case is a vacuum pump.

You can deflate the boat using any external mechanical or electric pump. Procedure:

place the item on a flat surface;
inspect for external damage;
clean from dirt, silt, mud;
open the valves that each compartment is equipped with, one by one, clear the holes from the internal plugs;
connect the pump, start it up;
begin to bleed air from the ends of the craft, gradually moving to the location of each valve;
Empty each compartment one at a time.

Squeeze out any remaining air with your hands. Proper care of your inflatable will help you avoid many problems and extend its lifespan. The main enemies are moisture, sand, algae, dirt. Take care and inspect the boat during the entire period of use. Fold, roll the product not tightly, all parts should be in a free state.

PVC boats can be stored in a fully or partially deflated state.

Free boats and small boats completely from air masses and store them folded or rolled up. Some specimens can be hung on mounts and kept hanging.

Keep in a warm room, away from hot radiators and heating devices. Hot air dries the rubber material, causing it to begin to crack and crumble.

Place oils, alcohol-based substances, and gasoline in a safe place to avoid damaging the boat. Don't let animals get close, they can bite or pierce the object.

Preparation for storage

Before deflating a mattress, it needs to be prepared for storage. To do this, use a simple soap solution. You cannot use “aggressive” household chemicals. This may damage the material. After cleaning, the product is left to dry until it dries itself. Only after complete drying is it deflated and stored deflated.

Important! Drying should be natural, without the use of hair dryers and other heating devices.

Advantages of a mattress with a valve

Air mattresses with a valve are easy to use. The presence of a valve allows you to quickly inflate and deflate the product. Rubber products are equipped with conventional or more complex valves.

A valve with an internal bridge prevents the gradual release of oxygen during operation.

The screw-on threaded valve tightly closes the hole and reliably maintains the elasticity of the object. A regular cork is less reliable in use and has a limited service life.

Deflating an air mattress naturally

The best way to blow air without a pump is naturally. To do this, open the plug or unscrew the screw valve and wait until the mattress lowers itself. Then the outer surfaces are carefully pressed against each other, the product is folded and sent for storage. A single-section mattress deflates in 15 minutes, the rest take longer.

If the valve has a protective cap, proceed as follows:

First, the protection is unscrewed and the cap is removed.
The valve train compresses and the internal flap moves rearward.

When using the bicycle method, squeeze the device with your fingers on both sides so that the plug comes off; you can also press the nozzle located in the center with a match. The operation must be performed with an assistant.

Basic types of valves for inflation and deflation

Each inflatable specimen is equipped with one or more valves for air intake and release. Valve mechanisms are:

plug-plug, the most ordinary simple valve. Tightly closes the open hole for pumping and deflating air. Made of plastic, suitable for small-sized inflatable products with low internal air pressure. Found in swim mattresses and small inflatable products;
threaded plug. It screws tightly into the hole along the thread, is convenient to use, and prevents sudden opening of the valve as a result of an unforeseen situation. Promotes rapid deflation of air;
valve-button with a bridging element. Prevents involuntary descent of air masses. To release air, open the valve, lightly press on it, the bridging element will bend and free the hole for the free exit of air flow;
double acting valve with built-in adapter. Blocks air deflation inside and outside. Consists of a screw-on housing, a lid, and an adapter. Prevents foreign objects and debris from getting inside. Used in inflatables of famous brands intex, besway;
electric pump with air deflation function. Activate the option, the air masses will come out on their own;
valve built inside. It has a more complex design. Please read the instructions in detail before use.

Attention! Check the tightness of the valve as follows: inflate the product, wet the plug with an aqueous solution of laundry soap. A leaky hole will start blowing soap bubbles!

Valve opening

For simple valve models, simply open and wait a while until the air comes out on its own.

Do not use physical force in the form of pressing or squeezing the material. This will avoid damage. A valve with a more complex device, such as an internal flap or a bridging element, requires additional intervention.

Opening the damper

Built-in bypass element, the damper must be opened by squeezing the valve from the sides. This special mechanism reliably protects the air elasticity of the item. When squeezed, the damper moves to the side, freeing up the hole for unhindered air to escape out.

Models of these brands are equipped with valves of a similar design.

Unscrewing the valve

For conventional valve models, simply unscrew along the thread. First, make sure there are no built-in mechanisms.

With pump

An electric pump built into the mattress releases air masses quickly, evenly, without jerking. To do this, close the injection hole with a lid. Eliminates damage to the internal structure and external material of the product.

The external mechanical foot pump is convenient to use. To bleed air, lightly press the device chamber with your foot.

Valve differences

The design of the valves in different models may differ greatly, which, accordingly, makes adjustments to the deflation process.

Cork on the bow . The most “primitive” option, more often used in simple and swimming models. To deflate the mattress, the valve is opened, allowing air to escape unimpeded. All that remains is to wait.

Important! It is not recommended to press down to speed up!

Screw-on plug . Also from a series of extremely simple devices. The same plug, only more reliable. The hole for inflation/deflation has a larger diameter, which means the air comes out faster than in the version of the plug on the bow.

Additional valve . Car or bicycle type device. To deflate the mattress, you will need to press on the nipple, after which the air will begin to flow out freely.

Mistakes when deflating a mattress

If you are releasing air from a rubber product for the first time, carefully read the instructions for use. This information will help you avoid common mistakes, preserve the integrity of the item, and extend its service life. Note:

to the surface. It must be level, without bumps or irregularities, to avoid damage;
Keep sharp, piercing and cutting objects away. Otherwise, the item may be accidentally pierced or cut;
objects with heating, injection of hot air. Sources of high temperature change the rubber surface of the object towards distortion. The rubber becomes loose, lumpy, and wears out quickly;
cold negatively affects the rubber surface of the product. You need to pump and deflate air from the mattress at a comfortable room temperature;
use low pressure pumps. Such units bleed air with the highest quality and safest quality;
Do not bleed air with powerful compressors and units. Strictly avoid using a car compressor.

After deflating, carefully inspect the item for possible damage and adhering foreign elements (plant particles, lumps of dirt, small pebbles). This will help avoid damage to the product during storage.

Common Mistakes

Here are some tips that will prevent you from making the most common mistakes when deflating this product, and you will not have to repair it.

The surface on which the mattress will deflate must be flat and free of sharp objects.
Any working heaters must be removed from it.
Sub-zero temperatures also damage the surface of the product.
It is strictly forbidden to use a tire compressor to deflate tires.

If you follow these simple rules, the product will serve faithfully for many years.

mattrasik.ru

Damage Prevention

To ensure that the mattress is no longer damaged, it is recommended to follow the following operating rules:

Before throwing the mattress on the ground, remove all sharp objects or place a thick cloth underneath it.
Do not inflate the product too much.
Protect the product from the claws of pets.
You should not drag an inflated mattress along the ground, especially when a person is on it.
It is prohibited to jump or sit suddenly on the mattress.
The air must be released slowly.
Wash with soapy water.
Before folding the mattress and placing it in the closet, it must be thoroughly dried.

By following these recommendations, you can use the product for a long time; it will serve you for more than one year.

As you can see from the above, you can see how to seal an inflatable bed - the process is not at all complicated; you can completely cope with repairing the product yourself. Even better is to prevent such damage. But if a puncture occurs, do not despair - everything is in your hands.

www.stroim.guru

How to flush with a pump

If you are wondering how to deflate an air mattress using a pump, then the process here turns out to be much simpler and faster. After the preparatory work and deflation of air under its own weight, the following series of steps are performed:

the pump is connected to the valve, and the remaining holes are clogged (in some models 2 or more valves are used);
air is removed using draft;
the pump is detached and the product is folded for storage.

Proper deflation of the mattress will allow you to get the perfect result without wasting time and effort. In addition, the structure will remain in perfect condition, making it possible to use it in the future without the slightest fear.

Source of the article: https://intex-leader.ru/stati/kak-pravilno-sdut-naduvnoy-matras/

Summing up

When choosing a mattress model, decide on your needs

. In any case, pay attention to the quality of the product, the reputation of the manufacturer, the characteristics of the product (the question: how to deflate an air mattress is not the last on the list of characteristics). Customer reviews can be a great help in choosing the right model.

For budget models, choose those that have an additional valve that prevents deflation

(even with the lid open). This will allow you to feel calm on the water, and using an inflatable product at home there will be no risk of waking up on a half-deflated mattress.

While pumping air, you should carefully monitor the elasticity. An overinflated mattress may become unusable due to a split seam. Some of the air from the pumped product should be released (before you start using it), thereby reducing the pressure

A built-in or electric pump with an air blowing function is the best option for large-volume and regularly used products. The disadvantages of such devices include high cost, greater weight of the product, and the need to connect to an electrical network.

Video

How to deflate an air mattress?

Each mattress has a release valve. It should be opened and the air should be allowed to escape on its own. Additional pressure will slow down the process and damage the product. It is better to start twisting the mattress from the edge opposite the valve as the air escapes. While twisting, you need to slowly squeeze out the air.

Some models of air mattresses provide an additional internal valve. This part is designed to prevent spontaneous deflation if the plug is accidentally opened. When deflating such a mattress, open the lid and squeeze the valve with your fingers so that the internal hole does not close. You can carefully insert a match inside while the air comes out.

How to flush with a pump

the pump is connected to the valve, and the remaining holes are clogged (in some models 2 or more valves are used);
air is removed using draft;
the pump is detached and the product is folded for storage.

Deflating the mattress correctly

A deflated and folded mattress should only be stored in a clean condition.

. Therefore, if necessary, before starting the deflation process, the mattress should be washed and cleaned (especially important if the product is deflated after being used outdoors, at sea, or for a long stay of guests who slept on it).

Use soapy water and soft textiles for cleaning.
Do not treat the surface with aggressive chemicals, including those containing alcohol and dyes.
Allow the surface to dry completely naturally.
Only now begin the deflation process.

Reference! The same rules apply to swimming models.

The air from the mattress should come out evenly. The deflation process begins with the opening of the valve. In order to speed up the process, some begin to put intense pressure on the product, neglecting the operating rules. This is not worth doing. The deflation time will not be reduced too much, but uneven “jerks” as air exits the hole can damage the mattress.

Advice! If the mattress is going to be inflated and deflated quite often, it is preferable to choose models with the “Blowing out” function. Otherwise, the long deflation process will become annoying over time. The presence of this function is also preferable for very large models. To deflate an air mattress of impressive size mechanically will require a lot of time and patience.