Types of magnets on clothes. How to remove magnets from clothes without damaging the item


Often, after returning from the store, customers find anti-theft clips on their clothes that the sellers have not removed. It is quite problematic to remove a magnet from clothing on your own, and therefore, if you still have the receipt, it is better to return to the store, where they will quickly open it using a special device.

But if the item was purchased in another city, the receipt was lost, or you simply don’t have time to go to this store, then you will have to act on your own. You should immediately take into account that the magnetic tag contains indelible paint inside, which will ruin the renewal if any careless action is taken.

The most common proven methods

You need to act extremely carefully, then it is possible to successfully remove the clips at home without special pullers.

Methods without and with a magnet:

  1. Scrunchy.
    The accessory is placed between the fabric and the convex part of the magnet, which rotates, and is pushed until the elastic hooks tightly and the rod is free - then you can begin to move both parts in different directions until they are completely open.
  2. Lighter or candle.
    With the help of fire, the convex part is melted, after which the internal contents of the clip are removed and opened.
  3. Wire cutters.
    The convex part of the magnet is cut off with a tool, then the protective mechanism is removed and the remains of the clip are removed.
  4. Hacksaw for metal.
    A saw works on the same principle as wire cutters: they separate the head and disassemble the mechanism. For safety, keep the latch with the convex side up.
  5. Round or square magnet.
    It is purchased in a specialized store. A magnet is applied to the rounded part and the clip opens easily. If you were unable to demagnetize the tag on your clothing the first time, you need to turn the magnet over to the other pole or take a more powerful one.
  6. Screwdriver with drill.
    Drill out the middle until the needle comes away from the plastic. Then carefully disassemble.

Advice! A suitable magnet can be removed from a used hard drive (you will need up to 4 of them).

There are several methods for removing a magnet from an item. The simplest of them is not very different from the above and consists of going to a nearby store that uses the same magnets to protect their goods. Devices for their removal should be at each checkout, and an employee, meeting you halfway, can free your item from this protective device. If you don’t want to explain to the cashier who forgot to remove the magnet from your item and why, try removing it yourself.

This can be done using stronger magnets. An excellent option would be

using magnets from a computer's hard drive. But one such magnet will not be enough.

You will have to use 2-3 pieces. Place them together and place them on the protruding part.

magnetic tag - this will be enough for it to demagnetize and be removed.

If you have no way to find magnets from your hard drive, try breaking the plastic case using side cutters or pliers. Doing so

you have to be very careful, because some magnets contain capsules with indelible paint,

damage to which can lead to contamination of clothing and, as a result, the impossibility of its further use.

To remove the protective magnet yourself, you may need an ordinary rubber band.

If you think that the clip contains ink, put the item in the freezer for several hours - the capsules with the marker will freeze even if

damage will not harm clothing. Place the elastic so that it fits in the gap

between the magnet and the item, if the elastic band is narrow, use several pieces. Start carefully

rotate the magnet - the rubber band will begin to twist between its parts. When it is completely hidden under the magnet,

start rotating and stretching both parts of the magnet. Continue these manipulations until

until they separate.

Self-withdrawal

In an attempt to maintain product and profit, most clothing stores have recently introduced a number of innovations. They concern not only video surveillance and security systems, but also individual magnetic tags for each item. The latter are especially effective in preventing theft in clothing stores, but also cause discomfort for some store visitors.

Safety precautions when removing at home

When removing the magnetic sensor yourself, it is worth remembering the following precautions:

  1. The sensors must be removed with extreme caution so as not to damage the product.
  2. You should not try to tear off the protection.
  3. Capsules with dye can ruin the item forever.
  4. You can only set fire to the protection in a well-ventilated area or outdoors.

Despite the various ways to remove a clip at home, it is better to use a magnet installed in a store. This way the product will definitely remain safe and sound. Removing magnetic protection at home should be done with extreme caution. And in the future, it is better to once again ask the seller to check whether all the protective clips have been removed.

Source

Why do we need magnets for clothes?

There are often cases when the seller,

looking around,
you may forget to remove the magnet
using special equipment - this leads to the fact that after buying clothes in your free time, you may find such a magnet on your clothes along with a reliable fastener, which is quite difficult to remove with your own hands.

In order to avoid such situations, it is recommended to check the clothes in the store after purchase, but if you find yourself in a difficult situation, a few practical tips will help you with the help of which you will be able to remove the magnet without special equipment.

How do anti-theft sensors work?

There are several options for anti-theft systems in stores. They all have a different look and shape, but perform one function - block the theft of goods. At the checkout, the seller removes the magnet with a special device. More often we see anti-theft guards in a round shape, which can be a hindrance when trying on hats or sunglasses. However, there are also more practical options in the form of a flexible tag, so that the buyer can conveniently try on clothes or an accessory.

What should you do if the store assistants forgot to remove the magnet from your clothes?

When you do happen to come across this problem face to face, you can save yourself the extra work by contacting the store salesperson

where you bought your clothes.
the receipt and the purchased item
with you , the seller will quickly serve you and remove the magnetic tag using equipment.

In exceptional cases, for his negligence and loss of your time, a store employee may apologize as a small compensation - this could be a percentage discount or a bonus for the purchase of other clothes.

Don’t be afraid to contact the store for help, the store’s policy is mainly aimed at satisfying the customer’s services, as well as ensuring legal commercial relationships.

Quickly remove the magnet from clothes after purchase

There are often situations when it is not possible to contact the store directly; this may be due to the fact that the item was purchased while on vacation in another city and there is no way to contact its representatives.

In such situations, you should not worry, but on the contrary, it is best to be patient, because the easiest way is

The way to remove a magnet
is to use force to remove the magnet.
This can be done with
a hammer
or
pliers
, the main thing is to loosen the locking mechanism.

Before you begin removing the magnet, make sure that the fixation system does not use paint, which could deliberately damage the item if you try to break into it or destroy it. Place the clothes in the refrigerator for a couple of hours to freeze the dye.

What should you not do?

When removing a magnet at home, you need to follow safety precautions, as you can not only damage the product, but also injure yourself. In particular, this applies to the use of a screwdriver, knife, wire cutters and hammer.

To avoid damaging the detector itself, use only a special tool or buy a neodymium magnet. Alternatively, use the intercom method. All other options involve damage to the item. Also, do not forget that some devices will contain paint capsules that must be removed very carefully, otherwise you will stain yourself and the product. Use the option of burning plastic only outdoors or in a ventilated area.

It is impossible to remove a magnet without the use of special equipment, however, the above methods will help you get rid of anti-theft devices using available means available in every home.

How to remove a magnet from clothes without damage?

If it happens that you are far from the store where you made the purchase and simply do not have the opportunity to remove the tag quickly and without damage, you can turn to any other store for help

clothing using a magnetic tag system.

The main disadvantage of this method is that the store administration, as well as the seller, have every right to refuse your request due to the fact that the item was purchased in another store, but if you used a chain of stores, you will be guaranteed the provision of these services.

Magnetic tag security mechanism

The plastic tag mechanism consists of the following parts:

  • Two cones of different diameters for balls.
  • A metal rod piercing clothing.
  • Fixing spring.
  • Dye capsules.

The dye capsules are placed in a small cone and tightly hold a metal rod that pierces the clothing. All these parts are located in the outer cone and reliably fix the paint capsules, while protecting them from falling out. The spring holds the entire structure tightly, and when you try to remove the clip, its fixation only increases. You can quickly and effortlessly remove a magnet from clothing only with the help of a special device in the store.

Important! If you have lost your purchase receipt, and the seller does not want to meet you halfway and use his magnet puller, then you will have to do it yourself. It is recommended to first place the item in the freezer so that the dye in the capsule hardens and does not stain the clothes.

How to remove a magnet from clothes yourself?

Even with a set of tools for destroying a magnet at hand, most clothing connoisseurs will still have a great desire to preserve the clothing in its original form in any way; in this case, several simplified methods of influencing the magnetic tag will help you.

To neutralize the tag, you should try the magnetic method.

- it consists of using another magnet to loosen the latch. Such a magnet is quite easy to find; it can be removed from an old non-working hard drive or bought on the radio market.

To unlock the magnet, you will also need a knife with a thin blade.

  1. Using force, insert the knife between the plate and the tag body
  2. Place the tag on the side of the magnet you got from your hard drive.
  3. Bring the magnet closer and further away several times in cases where no effect occurs
  4. If no influence was exerted on the tag magnet, turn the second magnet over and apply the other pole

If you are unable to open and unlock the tag, the problem may be with the power of the second magnet. When buying a magnet on the radio market, make sure in advance that the magnet is powerful enough to cope with this task.

Variety of other options

In the case when both of the above methods of how to remove magnetic locks from clothes are irrelevant for you, you need to turn to the third. You will have to get a little angry at the magnet, imagine that you hate it even more than your own boss, grab one edge of your clothing so that the lock is on the other side, and hit the wall or floor with all your might. The essence of this method is that with a strong blow, you can activate the internal structure of the lock - in particular, a special cylinder with balls, which will press on the spring and separate both parts of the “magnet”. It’s not a fact that it will work out the first time, but with the right amount of effort, the result will come pretty soon.

The main disadvantage of the previous method is that when hitting and waving clothes, you can damage the clothes themselves. Therefore, we will tell you about another way to remove magnetic locks from clothes.

. It is an improvement on the last option. Place the clothing on a hard surface, preferably one that will not break when struck with a hammer. The main thing is to turn the “magnet” out so that as little clothing as possible remains under it. Once you have completed all the preparations, strike the magnet with the wide side of the hammer. This will allow you to break the lock. If you want to keep it safe and sound, take the “magnet” in one hand, and the hammer in the other, and deliver blows that will be much softer, but more targeted and no less effective. Three, maximum five blows will be enough to release the lock, that is, to force the cylinder to press on the springs.

And this method does not suit you? Then another option is how to remove magnetic locks from clothes. There is a small bulge on one side of the locking device. Take any sharp, reliable and strong object (for example, a carving knife) and start picking at the bulge. Be careful not to get hurt; in this case, holding the lock in your hands is not recommended. As soon as the spring comes out through the hole you made, the cylinder with balls will also be unlocked and this will allow you to remove the lock.

How to open a magnet on clothes using improvised means?

If you do not have the necessary tools at your disposal and also do not have the opportunity to visit a clothing store, you can use not the most effective, but the simplest method of deactivating the magnet.

To do this, you will need to put the clothes along with the tag in the refrigerator for a couple of hours, and when the paint freezes, take it out and wrap it with an elastic band around the bottom of the magnet

covering the surface of the clothing.

Carefully rotate the tag so that the rubber band can go as far as possible to the center of the magnet, then try to slowly add a few more rubber bands, and then slowly move the magnets away from each other, simultaneously getting rid of the metal pin.

Be careful and make sure that the paint is securely frozen, because there is a possibility that if you interact roughly with the magnet, the mechanism will work and ruin the clothes.

Types of protection

Magnetic protections come in different types. It can be:

  • simple magnetic stickers;
  • plastic Alarm sensors;
  • flexible protection.

Magnetic stickers and tags

The sticker device is extremely simple. This is the most cost-effective way to protect goods in a store. The sticker consists of:

It can be pasted in places that are invisible to the buyer, or it can be on a company label.

Plastic flat, round and other Alarm sensors

They have a more complex structure. The sensors are different in shape:

  1. flat;
  2. cylindrical;
  3. rectangular;
  4. round with a convex part.

The main difference is in the system of fastening the two parts together.

  • For clothes, as a rule, magnets with a needle are used.
  • Sensors with a cable are used for shoes and accessories; the same protection is used on premium goods.

Flexible system

For food or unusually shaped items, a flexible system is used. It is made in the form of a long flexible cable. Regardless of their shape, the sensors do not differ from each other in design.

The magnetic protection consists of two plastic parts:

  1. In the part of the clip where there is a convex part, a needle or cable, several magnetic metal balls and a spring are mounted.
  2. In the second part of the protection there is a hole for attaching a needle or cable.

If you insert the fastener into the second part, the balls will make room for attaching the nail. It will not be possible to pull the protection back: the balls will be sandwiched between the cone and the connection. In order for the balls to move and release the protection, a magnet is needed. The magnet will pull the balls to the opposite side, and the parts of the protection will separate from each other.

From the description of Alarm’s features, it becomes clear that there is no magnet as such in the structure of the sensor. A magnet is needed to create different polarities of the field. This will separate the parts of the sensors from each other.

To avoid damage to the product, it is better to remove such protection in the store. Otherwise, the product will be irretrievably damaged.

Video: How to remove a magnet using a lighter and a screwdriver without damaging your clothes?

Anti-theft sensors are used in many stores. This is a good thing and it has helped to catch many too cunning buyers. But sometimes unpleasant incidents happen with these devices when, in a hurry, the store clerks forgot to remove the magnet, but at the end it doesn’t work and the person goes home with an unnecessary tag. It’s good if the retail establishment is nearby and you can present a receipt so that the seller can easily remove this thing from your clothes. But what to do when the purchase was made on a business trip, during a visit, in general, in another distant city? We will present here several methods that do not require the skills of an experienced installer.

How to remove a magazine magnet?

The rubber band method

How to remove a magnet from a purchased item using another strong magnet?

Radical destruction of the tag body

Cutting the tip of the magnet

Melting of the magnet body

Burning out a tag using a lighter

You see that there are a great many options for how to remove a magnet from clothes. All you need is desire and a simple tool. All of the above manipulations are simple. We have presented methods that even women or teenagers can apply.

Sometimes a situation arises, it must be said that it is extremely ridiculous, but often repeated in my life, which I will now tell you about. Like any normal woman, I love shopping and go shopping at least once a month. Having bought various feminine items, I return home in anticipation of a home fashion show in front of my household. Now imagine my indignation when I see that the stupid seller forgot to remove the magnetic tag from my purchase. Those women who have encountered a similar situation will understand me. And now the question arises - how to remove a magnet from clothes?

Currently, I have already decided this question for myself a long time ago, but let’s take it in order. Evening, a store that is already closed on the other side of town, you have a piece of clothing with a magnetic tag hanging on it, a desire to show your loved ones your purchase, anger at the seller and an open question on how to remove the magnet! Sounds familiar, doesn't it?

Homemade ways to remove clips

For those who are interested in how to demagnetize a magnet on clothes at home, we can recommend several technologies. All of them are primitive and, to a greater or lesser extent, risky. Except the last one is correct.

Before moving on to the artisanal method, it is advisable to do the following. To avoid staining the purchased item with indelible paint, it is recommended to put it in the freezer for several hours. Let the marker harden, it’s safer...

And now - how to remove a magnet from clothes at home:

  • A ring wide thick elastic band is threaded between the clothing and the convex side of the tag. After this part is rotated “back and forth”, without pulling. When the elastic band fits under the clip, rotate both parts, gradually pulling back, until they are completely disconnected.
  • Start - as in the previous method. After the rubber band fits under the clip and is adjacent to the metal rod, break the upper (convex) part of the tag with pliers or wire cutters, and pull out the spring with the balls.
  • Melt the upper part of the clip over the candle, and use tongs to pull out the spring with the balls. After this, the rod will be released and the tag can be easily removed.
  • Strongly and sharply hit the junction of the tag halves to separate them. (The most unreliable of the methods).

How to remove a magnet from clothes?

There are several solutions: wait until morning and go across town to the store to remove this damn tag, but the very thought of this is disgusting. Another way is to try to get rid of this tag yourself using various tools, but then there is a high probability of damaging an already loved item, yes, it seems like a dead end here too.

My assertiveness and curiosity helped resolve this issue once and for all. Knowing from school that a magnetic field of one polarity can be opposed to a magnetic field of another polarity in order to weaken its effect (yes, she spoke like a real blonde, but it’s accurate!).

This method is safe, fast and convenient; all I needed was a powerful magnet. After some googling, I found out about neodymium magnets. A little more patience and now I get a call from the manager of the Ural Magnit store

What I liked about this online store was the immediate response to my request for advice, the polite and competent employee who patiently listened to my question and clearly explained what I needed. I received my magnet within a week and the question of how to remove the magnet from clothes no longer faces me. Thanks to the guys from the Ural Magnet online store.

Boomerang effect or use a magnet against the “magnet”

The next method is how to remove magnetic locks from clothes

, will be virtually identical to what is used in stores. Again, find the face of the lock and the bulge on it that we tried to pick out earlier, and apply a powerful magnet to it. The cylinder will be pulled towards the magnet and press on the spring, which will allow you to get rid of the lock. But the magnet used for these purposes must really be powerful enough, since the cylinder is relatively heavy and it is not so easy to set it in motion. Especially if you decide to use the first magnet you come across, which is a souvenir item attached to the refrigerator. But a DC electromagnet will certainly help you.

By the way, an AC electromagnet used in a compressor that supplies oxygen to the aquarium can come to the rescue. However, first you will have to “break” it a little - remove the end plate, exposing the W-shaped core. Now again determine which side of the lock the bulge is on and bring it to the core. The magnet causes the lock to vibrate, pulling and releasing the cylinder and spring. All you have to do is guess the moment when the cylinder begins to put pressure on the spring and remove the plate blocking the lock.

We hope that from the variety of ways to remove magnetic locks from clothes

, you will still find the one most suitable for you. Good luck fighting the castle and be careful when purchasing goods. This will save you from having to cheat in order to remove the lock.

Rating
( 2 ratings, average 4 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]