Snowflakes for windows: Needpix Snowflakes on the windows are part of the New Year's decor. How to properly attach openwork decorations so that you can remove them without problems after the holidays? Choose the appropriate method of attaching to glass and create a winter fairy tale with the help of carved snowflakes.
What to use to glue snowflakes on windows? New Year's decor is glued to glass with laundry soap, detergents, water, milk, toothpaste, paste, glue, tape, egg white.
How to attach paper snowflakes to windows? Depending on the type of adhesive, the decor is glued to windows in different ways: applied to the entire back side of the product, outlined, dotted along the silhouette and lintels. Volumetric and weighted snowflakes are attached to one or several pieces of double-sided tape or glue.
Types of material for snowflakes
Snowflakes for decorating windows are sold in the store, but you can cut them yourself using New Year's stencils. Most often, such decor is made from plain paper, using various techniques and additional decorative materials. After which they should be attached to glass or hung on tulle.
Decorative snowflakes can be made from the following materials:
- Colored and white paper.
- Napkins.
- Self-adhesive paper.
- Plastic and foam.
- Beads, fabric, threads and improvised materials.
When choosing material for snowflakes, preference should be given to lightweight ones. This will allow you to attach the snowflake to the glass without any problems, and after the holidays you can easily remove it. Otherwise, you will have to use strong glue, which leaves stains on the glass and will be very difficult to wash later. Therefore, the optimal material for snowflakes is paper or napkins.
See also: “Snowflake templates for cutting”
Threads to the cornice
If you don’t want to put anything on the windows, you can attach such decorations to the cornice. To do this, you only need paper, scissors, a needle and thread. The first step is to cut out snowflakes from white or blue cardboard.
There are many diagrams of such products on the Internet. Next, using a light thread and a needle, make a garland from the cut out shapes. Its length should correspond to the height of the window. Then the finished garland must be attached to the cornice using paper clips or other stationery.
In the same way, snowflakes can be placed on walls, cabinets and other surfaces.
Snowflakes glued to the window are not only an inexpensive decoration, but also an interesting process for children. You can cut them out with the whole family while watching New Year's movies, and then decorate the house with them. Using available tools, you can completely replace glue and tape, which always leave unsightly marks. These home remedies are great even for children because they are completely safe.
What's the best way to glue snowflakes?
Strong holding materials can damage and stain the glass. However, the glued template should hold up well for several days or even weeks. Therefore, the adhesive material must be selected with great care.
The following materials can be used to attach snowflakes:
- Water and milk.
- Soap solution or other detergents.
- Toothpaste.
- Scotch.
- Different types of glue.
- Liquid paste.
Each of these adhesive materials has a number of advantages and disadvantages. Natural products are easily washed off and do not leave dirt on the surface of the glass. And tape, various glue solutions and self-adhesive paper can leave stains on the glass that are difficult to get rid of. But their effectiveness will be higher. Therefore, they can be used to secure snowflakes made of thick paper, fabric, plastic or other heavy materials.
It is recommended to wash and dry the window before decorating. Prepare all the materials by arranging the snowflakes the way they will be attached to the window. If the adhesive composition requires special preparation, do this in advance.
How to quickly glue snowflakes to a window: 7 easy ways
Snowflakes are traditionally used to decorate windows for the New Year holidays. Their fancy pattern gives the room an elegant and original look. Today, such decor can be purchased in stores or made with your own hands.
Before hanging New Year's decorations, the question often arises: “How can I clean the glass later?” At first everything is beautiful, but then you can spend hours cleaning off the glue with tape... The site “KnowKak.ru” has found for you the simplest recipes for mixtures that are quickly prepared, hold snowflakes well and are easily washed off after the holiday.
If previously snowflakes were cut out of paper, today window decorations can be made from any material. Knitted snowflakes, decor made of beads and plastic look original on the window. The main rule is that New Year's decorations should be light. This way they won't constantly slide down.
The main means by which you can attach snowflakes from different materials:
- toothpaste,
- milk,
- soap solution,
- water,
- liquid paste,
- Double-sided tape,
- PVA glue, stationery.
The adhesive made from natural ingredients hardly stains the glass and is easily washed off. You will have to work much longer with materials with an adhesive surface. But at the same time, this option is suitable for volumetric compositions and plastic decorations.
Milk and clean water
One of the available adhesive solutions is milk and water. They can easily glue thin paper snowflakes. You need to completely dip the decoration in the liquid and press it against the glass. This method requires careful work, as the decor may tear during operation.
The big advantage of this option is that the glass is very easy to clean. The paper just needs to be wet and removed.
Soap solution
To prepare the soap mixture, you need to dissolve a small piece of laundry soap in water. Using a foam sponge or brush, apply the solution to the snowflake and apply it to the glass. Blot any remaining liquid with a napkin or soft cloth. This method will hold any paper decor, as well as knitted decorations.
Soap residue can be removed with warm water. You can use shampoo or cleanser instead.
Toothpaste
Another very common solution for decorating a window with snowflakes is toothpaste. After drying, it will very firmly fix the decor on the glass. In addition, washing it off will not be difficult.
Only white paste should be used. Otherwise, colored granules may ruin the decoration. First you need to make a thick solution of toothpaste in water. Dip the paper decor into the mixture and place it on the glass. Remove excess liquid.
You need to remove snowflakes that are glued with toothpaste as follows. Apply clean water to the glass using a spray bottle. Wait a few minutes and rinse with water.
Paste
If the previous methods are not suitable for you to hold snowflakes on glass, then use a paste. You can also cook it yourself. To do this, dilute the flour with hot water. The mixture should have the consistency of thick sour cream.
Once the mixture has cooled slightly, apply it to only one side of the jewelry. Press well against the window, blot with a dry cloth and leave to dry. You can remove the paste from the glass with warm water, but you just need to wait longer until it becomes limp. Then clean the window with a solution of detergent.
Glue and tape
The strongest fastening for New Year's decorations will be PVA glue or in sticks (glue stick). But it will be much more difficult to remove it from the glass than in previous versions. There may be marks on the surface as you will have to rub the glass vigorously to remove any remaining adhesive.
You should absolutely not use super glue or types of Moment glue. It will stick the decor to the glass forever!
Large plastic or foam figures are often glued to double-sided tape. It will hold voluminous jewelry well. But it leaves marks on the glass that are difficult to wash off. To do this, you will have to use alcohol or a solvent such as nail polish remover.
As you can see, there are many ways to glue snowflakes to the window. As a result of using them, you will be able to enjoy the beauty of New Year's decor and easily remove it after the holidays.
Water and milk
If you are looking for the easiest way to stick snowflakes on windows, we recommend using plain water.
Snowflakes need to be moistened in water, applied to the glass, and carefully straightened. Excess water should be removed with a soft cloth. After drying, the snowflake will remain tightly attached. This method only works effectively with thin paper. The thick paper will simply fall off after the water dries. You can use milk instead of water. In this case, the snowflake is attached to the glass more tightly. In addition, both water and milk can be easily washed off after using the decor.
Soap or soap solution
Soap is an effective method for gluing paper snowflakes to glass. It is necessary to grind the soap using a grater and add a small amount of warm water. Treat the back side of the snowflake with the resulting mixture and glue it to the window. Excess soap solution must be removed with a soft cloth.
In addition to bar soap, you can use liquid soap, shower gel or shampoo. After using this product, removing soap residue is quite easy. Can be used to attach snowflakes made from napkins or loose paper.
Flour with water
This method is also perfect for using with children. To prepare it you will need 2 components: regular wheat flour and warm water.
The composition must be diluted to the consistency of regular PVA glue. The mixture should not be too liquid and without lumps, homogeneous. It should be applied to paper, not glass; it is advisable to use a brush so as not to overdo it with moisture.
After the holiday is over, it is enough to wash the entire surface of the window with a sponge soaked in clean water. Next, wait until the paste dissolves and remove all the paper from the glass. This product will not leave any marks on glass or mirror.
Toothpaste
You can also attach paper snowflakes to the window using toothpaste. Give preference to white pasta. To do this, apply toothpaste to the back side and along the contour of the snowflake, then press it against the glass.
This method is not suitable for openwork snowflakes with thin bridges. Removing toothpaste from glass is very easy. An important advantage of this method of fastening is the creation of imitation snow.
How to make paper snowflakes with your own hands
First you need to stock up on paper. You can get by with a regular office one, white. Those who prefer cheerful, bright colors should prepare colored paper. It should be double-sided and thin. It is difficult to cut out of dense material; the figures are rough and not airy. You will also need a pencil and scissors. The pencil sharpens well to create crisp, fine lines. Use sharp scissors so that you can cut and not tear or chew the paper.
You shouldn’t apply a heavy drawing for the first time; you should start with simpler models. It is also better to practice on rough sheets of paper first.
Step-by-step implementation of a snowflake model with four rays:
- A rectangular A4 sheet needs to be converted into a square. To do this, you can measure along the long side the same number of centimeters as the width of the sheet and cut it off. A simpler way is to attach the shorter side to the long one. The edges should touch in a straight line, without gaps. The bend line is pressed. The excess part of the sheet is cut off. The result was a square folded in half - a triangle.
- The resulting triangle should be folded again and the bend line should be ironed well.
- A drawing is applied to the resulting new triangle. You can come up with it yourself or use stencils.
- Carefully cut along the contour of the design, moving the scissors smoothly so as not to cut off excess.
- Expand. The snowflake is ready.
Paste
You can attach snowflakes to the window using a substance such as paste. To prepare it, add hot milk or water to the flour. The consistency of the finished substance should be like sour cream.
The solution must be used immediately after you have prepared it. Spread the paste on the snowflake and press it tightly to the glass. Use a small amount of mixture so it doesn't bleed over the edges. The paste can be easily removed with warm water and soap.
Soap method
Using dissolved soap, you can secure the heaviest and most voluminous decorations, but this method is suitable for simple paper products. It is necessary to dissolve any type of detergent in lukewarm water until a saturated solution is formed. You can determine the concentration by tactile sensations: if a noticeable film remains on your hand, which is difficult to wash off immediately, then there is already enough soap. Take a little prepared “glue” onto a sponge or fluffy brush, lightly moisten the snowflake, and then stick it on the glass. Not only paper, but also fabric and knitted products can be secured in this way. Remains of the solution and dripping drops can be removed with a damp cloth. If they have dried out, it is better to use a glass cleaner.
On a note! Soap with a high fat content, for example, cosmetic soap for softening the skin with the addition of cream, is not suitable for this method.
Sometimes it’s not possible to fix the decor this way the first time. Therefore, it is better to stick on a couple of products first and see how they behave after complete drying. If the paper has shrunk a little, the edges have moved away from the glass, you should increase the concentration of soap, then continue working on decorating the window.
Glue or tape
Among the materials on which snowflakes can be glued, the most reliable is glue or tape. An excellent solution is a glue stick. It holds the paper snowflake perfectly on the glass and can also be easily removed with a soap solution.
It is also convenient to use water-soluble stationery glue. Never use Moment glue or other similar adhesives. They can damage the surface and leave permanent stains on the glass.
A good option for attaching paper snowflakes is tape. The main disadvantage of this product is the media on the glass, which are difficult to remove. When choosing what to use to glue snowflakes to the window, you need to take into account the thickness of the paper and the complexity of the pattern. You may not need to use strong adhesives; the simplest methods described above may also work.