How to make ripped jeans? How to make holes in jeans at home?

Read: 451

Just a few decades ago, it was difficult to imagine that ripped jeans would be worn by anyone other than homeless people and rock performers. Today, almost every person has them in their wardrobe, and for many, jeans with holes are the most frequently taken item out of the closet and the basis of their everyday looks. Looking at “holey knees” you may get the impression that this is the simplest and most uncomplicated trend that has ever existed, but this is not entirely true, because making beautiful holes on jeans is not so easy.

How to beautifully make holes in jeans yourself?

It would seem that such a simple thing as a hole is easy to make. However, not everything is as simple as it seems at first glance. Creating a distressed look in jeans and stylish holes is actually difficult. This requires not only time, but also desire, as well as the ability to give things an original look.

Holes on jeans are a hit of 2016. Be sure that any denim item will look fashionable and trendy if it has scuffs, scratches and holes. Only “improper holes” made hastily or for laughs can ruin such a thing.

beautiful holes in jeans

You've probably noticed people wearing clothes like this more than once. Some looked good, some looked ridiculous. How you will be perceived is determined by the technique of creating holes, which are easy to do at home.

In order for your jeans to look impressive, you first need to determine exactly where the holes will be. To mark, put the pants on yourself, you stand in front of the mirror and mark the necessary areas with ordinary chalk

Be sure that an item decorated in this way will become a stylish part of your wardrobe. After all, denim is perhaps the only fabric that has never gone out of fashion. Prepare a simple set of tools:

• scissors: regular and small (manicure)
• sandpaper (you can use pumice stone or any other abrasive brush)
• tweezers
• blade (it’s more convenient to use a regular stationery knife)
• needle
• thick cardboard or any wooden backing

utility knife for creating beautiful holes in jeans

Be careful about the fabric cuts themselves; they must be made very carefully so as not to touch the other side of the pants. To do this, place a board or piece of thick cardboard inside the trouser leg.

You are free to make absolutely any cuts in any direction. Longitudinal slits will create the effect of “loose threads,” while transverse slits will create the effect of torn jeans. Think over your image in advance and don’t be too lazy to once again draw a sketch on paper.

What will you need for work?

Before starting the work process, it is necessary to mark on the fabric the places where the holes will be located, as well as determine their number and shape . The appearance of clothing and wearing comfort depend on this.

Important! For many, it may seem that making a hole in denim trousers is easy. But if this procedure is carried out incorrectly, the product may turn out to be unoriginal and cause laughter among others.

There are several ways to decorate pants with slits, each of which differs in production technology and requires attention, as well as a certain amount of time. It is recommended to carry out the work using some tools that will help create the intended pattern on the pants, as well as design it effectively. Such devices include:

• manicure and large scissors;
• brush with metal teeth;
• sandpaper;
• tweezers;
• needle;
• chalk or marker;
• stationery knife or blade;
• wooden, plastic or cardboard lining.

Attention! In order not to touch the other side of the pants with a sharp object when making cuts, it is necessary to use a thick board, which will prevent such a problem and help make the hole of the desired shape.

How to make neat holes in jeans?

Neat holes in jeans are suitable for those who are not yet accustomed to radically changing their style and want to look flirty and at the same time on the “wave of the times.” Creating such a ragged effect is of course more difficult, it requires more time, but it is quite possible.

To determine the location of the “neat holes,” you should still put on your pants and mark the locations of future holes with chalk. After this, take off your pants and place cardboard inside the legs. To wipe, you will need a blade, a pumice stone and tweezers.

neat holes in jeans

In order for clothes to look unobtrusive and neat, you should not localize holes in your jeans too often and choose quite decent places for them:

• front pockets
• back pockets
• place for belt
• knees
• lateral thigh

To begin the work, take a blade and, at the site of the hole, begin “artistic excision” of the tissue in different directions. You shouldn’t get too carried away, just make sure that the fabric is cut.

After this, carefully rub the excision site with a piece of sandpaper or pumice until a hole forms. If you notice a lot of fringe, pull out the excess threads with tweezers, but under no circumstances cut them.

neat, not large holes on women's jeans

To add a feminine touch to denim trousers or to give a stylish look to too-holey pants, you can use a simple trick: take a piece of lace of any color and carefully hand-sew it to the back of the denim so as to catch only the front threads and not pierce through.

Ways to decorate jeans

You can additionally decorate the hole in 2 ways:

1. Sew a piece of lace fabric from the inside out. Its size should be slightly larger than the hole. You need to sew on a mandrel, first along the front side, processing the edges of the denim and leveling the patch. Then the trouser leg is turned inside out, the excess lace is cut off 1-2 cm around the hole and secured along the contour with a hidden seam. The material cannot be pierced through.
2. A patch option is to use a piece of jeans of a similar shade (you can choose material with an inscription or a fragment of it: from an old jacket, for example). Sew on the patch according to the same principles, but be sure to make and leave a fringe 2-3 cm long along the edge of the hole.

The following are suitable as additional decor for worn jeans:

• beads and rhinestones;
• drawings and inscriptions made with bleach;
• embroidery elements (simple outline, letter, etc.).

Such details are placed randomly on the pants.

How to make big holes in jeans?

Large holes in jeans are a sign of a person’s courage and character. Not everyone will decide on such a stylish detail, and just as not everyone suits it.

Large holes are most often made by:

• on the knees
• on the back of the knee
• on front pockets
• on the front of the thigh
• on the buttocks

Large holes in jeans are considered very sexy, as they expose parts of the body that are usually hidden from view. They need to be done “smartly” so as not to look funny and not cause ridicule.

large holes in jeans can be stylish, or they can reflect bad taste

• When creating such an element on jeans, you should understand that there should not be many large holes. It is best when she is alone and complemented by several smaller ones. An exception may be two holes: on the knees or on both sides, for example on the knee and on the buttock.
• Creating a large hole is not difficult: to do this, you should cut the fabric crosswise or cut out a piece of quadrangular-shaped fabric in the right place. These are the easiest ways to create holes. After cutting, the edges are carefully rubbed with sandpaper or pumice.
• A more complex but more beautiful hole will take longer: make several cross cuts. To do this, use a ruler to mark even stripes on the fabric. After the cuts, use tweezers to pull out the vertical threads and get a beautiful, opaque hole

How to make jeans with holes in the knees?

Holes in the knees are the most stylish and fashionable element of modern jeans. In order to correctly determine the location of the hole, you should bend your leg and make a mark, because it is much better when the sharp knee looks into the hole than the other part of the leg.

fashionable jeans with holes in the knees

Never make cuts directly on yourself, as you can easily injure yourself with a blade, knife or scissors.

• In order for the knee to be completely visible, you will need to cut a rectangular or round piece of fabric. After this, all edges are carefully rubbed with sandpaper, creating the effect of a real hole made by natural conditions.
• If you get threads while rubbing, don't cut them as this will give your pants more style. Only very long threads that look awkward should be removed.
• It’s good if you can achieve a scuffed effect not only around the hole, but also slightly beyond the hole. Both holes should be treated (if you are cutting both knees)
• You can also make a longitudinal hole on the knee; to do this, cut the fabric horizontally several times in one place. After the cuts, use tweezers to pull out the excess vertical threads and carefully rub the edges

beautiful jeans, torn at the knees

A little secret: A regular kitchen vegetable grater will help you achieve a ragged effect on your knees. To do this, you need to place a board inside your trouser leg, secure the jeans so that they don’t “fly off” and start rubbing the grater over the fabric as hard as you can. You can choose any side of the grater, but the most effective is the one intended for cheese - with the spines facing out.

Additional decor

An interesting piece of clothing will be one where holes and abrasions are complemented by other decor. In this case, rhinestones are relevant. It is best to take artificial pebbles with adhesive base, which are glued to the fabric using a hot iron.

A variety of beads, buttons, seed beads, glass beads, and sequins are sewn on with regular matching threads. To avoid having to redo the work several times, lay out the pants (with the abrasions already made) on a flat surface, and place the decor on them, choosing the most suitable places for this. Mark these points with a pen or marker, and only then sew.

The combination of ripped jeans with lace is a romantic option. Light, light trousers, complemented with lace inserts, are also a beautiful option for summer. The lace should be dense, textured, and match the color of the fabric. Such pieces are sewn into fairly large holes with torn edges. The inside edges of the inserts can be reinforced with non-woven fabric. If you have artistic skills, you can use fabric markers to create a truly fantastic, unique item.

In order for the holes in the knees to take on a finished look and look organic, you need to wash your pants in the washing machine two or three times in the usual way. Thanks to this, the edges of the slots will fray as desired. Please note that due to this property, the hole will become wider with each subsequent wash. Therefore, you need to make it initially not too large. And one more thing: you can take worn jeans for alteration, but they should not be already worn out or stretched. Otherwise, you won’t get a beautiful thing, and it will last a couple of times.

How to make holes in stretch jeans?

Stretch is a synthetic fabric. It looks very impressive on the body, as it is able to tighten and literally “squeeze” extra places without showing them to others.

Stretch jeans have flooded the market. They differ in that the thread in them is not cotton, but elastane. This quality can play a cruel joke on you when you want to create a beautiful hole in your jeans.

stretch jeans with holes

If you have a full figure and your jeans are tight, you may not get the effect of beautiful ripped holes and these holes will literally spread out horizontally on your body. Therefore, it is still advised to choose trousers either in a larger size, or to make only longitudinal holes.

Stretch jeans can be sanded just as well as cotton jeans. Try to choose the most advantageous places for holes: pockets, seams, knees and outer thighs. To prevent the stretch thread from fraying too much, work only with small holes.

How to make holes on black jeans?

Black jeans suit everyone, but they are still different from the standard blue and light blue ones. It's all about perception. The point is that the black fabric and your body color will contrast more through the holes. That is why holes on black jeans should be neater and neater.

holes in black jeans

Holes on black jeans will not be as impressive because there is no white thread in the trousers.

Give preference to horizontal holes on black jeans. To do this, make a cut with a blade and rub it thoroughly with sandpaper until the edges become fluffy with threads. Do not cut off excess threads. Such holes can be made along the entire length of the trousers, parallel to each other.

What not to do

When working with jeans and creating scuffs and tears, you need to follow a number of rules:

• do not make cuts, do not apply chemicals if the trousers are worn by a person: fitting is carried out for marking with chalk or a simple pencil, and then the item is removed and tried on again after washing;
• You should not use heavily worn items for work: any new abrasion can cause an unexpected effect of destruction of the fabric where holes were not planned;
• With holey jeans, you shouldn’t wear too frilly blouses and shirts: simple T-shirts, sweatshirts, and women’s blouses in the style of a men’s shirt look stylish.

If the pants are carefully crafted and worn in an appropriate ensemble, they will look quite aesthetically pleasing.

How to make fashionable holes in jeans?

Modern fashion dictates that everyone has holes in their jeans, and it doesn’t matter what they are or where they are. If you have them, you are on trend! A fashionable denim hole is one that is made carefully. Therefore, try to carefully rub each cut and make it as “shaggy” as possible. This will allow you to consider the cut to be factory cut and it is unlikely that anyone will think that you created it yourself.

fashionable holes in jeans

• Remember that the hole should reveal a beautiful part of the body and not underwear or cellulite
• There is definitely not just one fashionable hole; there are several of the same ones, evenly placed throughout the trousers.
• A fashionable hole is necessarily the effect of wear and tear, without clear cuts and lines
• Consider the style of your denim pants! Torn holes are best suited for boyfriend or tube style pants, as well as skinny ones.

Hole jeans: for those who are on trend

In the 70s and 80s, ripped jeans were an exclusively subcultural phenomenon. They were worn by hippies and punks. The pants, torn at the knees, had a kind of rebellious message. “Ordinary people” did not dare to follow their example, so as not to be included in their ranks for such a reason as holey jeans. Scuffs and slits on pants began to gain popularity among young people in the 90s with the advent of the grunge style, but even at that time they remained something outlandish and bold.

The designers of the Dolce&Gabbana Fashion House noticed the interest of young people in torn jeans. Italian designers were the first to introduce a new trend in their collections; this happened in the early 2000s. Hole jeans have become the basis of a new style - glamorous grunge. The “holeiness” from the legs spread to other items of clothing - sweaters, T-shirts and even tights.

The trend quickly spread across our country. Nowadays not only young people, but also representatives of the middle generation wear torn jeans. Torn pants are also presented in children's clothing collections. And if 10 years ago this trend was criticized, today the attitude towards it has become calmer, and the indignation of the older generation has subsided.

How to make round holes in jeans?

Round holes in jeans are an infrequent element that occurs either on the knees, or on the buttocks, or on the thighs. Its goal is to reveal a beautiful part of the body and make the image more sexy.

fashionable round holes on jeans

In order to create such a hole, the area should be determined in advance. After this, use chalk or a piece of dry soap to mark a circle or oval on the fabric. Horizontal cuts are made along the entire contour.

After this, the threads are separated using a needle. Use tweezers to pull out the vertical threads. You can reduce the number of horizontal threads by cutting them. Each round hole should be given a scuffed style using a pumice stone, float or sandpaper.

How to finish the edges

After mechanical impact on the material, you should immediately put the trousers in the machine - washing will complete the result of your efforts. Then go over the jeans with a hot iron.

Also, if you wish, you can treat the “scratches” with a whitening solution, highlighting the selected areas. The substance should be mixed in equal proportions with water and applied with a sponge.

How to make holes in jeans: tips and reviews

• Ripped jeans are a must-have for every fashionista, so if you haven’t purchased the right model yet, you can easily “refresh” your old trousers. You don't need any special equipment for this. Be patient, time and desire to create a unique thing
• When choosing a design, always pay attention to your figure. Do not create holes where they will focus attention on unfavorable parts of the body, for example large hips or bowed legs
• Longitudinal holes will always help to visually “stretch” the legs and make them longer, and stylish decorations, such as lace, will add romance and tenderness to the image
• Experiment with old clothes, try different ways to create holes and scuffs on the same pants and you can get exactly the thing you always wanted to have

Preparatory stage

You can change the appearance of your trousers very simply; you will only need the usual means at hand. Take your old and worn pants and follow a few simple steps.

Trying on, choosing and designating the location for the hole

First of all, you should try on old things. This way, you can evaluate exactly how the pants will look after the transformation. Think in advance about what specific result you want to achieve. Much depends on the quality of the material, which reacts differently to cuts and damage.

The hole can become deformed and grow. When trying on, make sure where the cuts will be located. Consider not only the characteristics of your anthropometric data, but also the density of the material itself. Mark the area of ​​future holes using white chalk, as it is clearly visible against any background.

Preparing the necessary tools and materials

There are several ways to make a cut on jeans. To do this, you must take the following available items:

1. Large and manicure scissors.
2. A brush.
3. Sandpaper.
4. Needle and tweezers.
5. Stationery knife (alternative - blade).
6. Material that can be placed under a trouser leg.