Jeans are undoubtedly a very comfortable wardrobe item. Unpretentious, wear-resistant, durable and withstands frequent washing. The picture is rosy, but this barrel has its own spoonful of honey. In the case of jeans, the “spoon” is the fly. If the zipper fails, it cannot be easily replaced. The process is very labor-intensive and requires the ability to work with a sewing machine. If you do not have such experience, then try to solve the problem with the fastener using one of the methods presented below.
If fabric or threads are stuck in the zipper
Lining or threads being chewed is the most common cause of fastening mechanism failure. This kind of trouble can happen if the zipper on your jeans is fastened in a hurry or jerkily. You can release stuck material by gently pulling the slider in one direction or the other. To troubleshoot the problem, it is important to be patient and avoid sudden movements. Most often, the lining becomes the “victim” of the dog. When fastening multi-layered items, you should be especially careful and adjust the fabric with your fingers when moving the slider up the links of the snake.
0
Source:
Her Majesty the Office Clip!
A colleague at work suggested this method to me. The principle is the same as with a pin, only a paper clip is used. I took a larger one with denser twigs.
The pin catches on the tongue of the dog.
And it is threaded through the button. The rods can be bent and adjusted.
Tip: when extended, the “tightness” of the paper clip is lost. Therefore, I recommend using as “strong” a paperclip as possible so that it does not loosen itself when moving!
The castle diverges
The only thing that needs to be replaced is the fastener on the jeans, which suddenly came apart. If this is not possible, then you can do the following: Insert an elastic band for money into the tongue of the carriage and hook it to the button after fastening it. The zipper on jeans can be temporarily fixed using a stapler or paper clip. When you have pliers or another similar tool at hand, you need to pinch the edges of the slider on both sides. A weak carriage is most often the reason why the zipper keeps coming undone.
How to repair a zipper if teeth have fallen out?
If the zipper has “lost” several teeth, then this damage is considered more serious and requires replacing the fastener. However, you can fix this problem yourself if you have time and patience. In this case you need:
- Buy a lock with similar teeth (ideal if you have an old snake at home, from which you can remove the teeth).
- We remove the number of teeth that is necessary.
- Use copper foil.
- Unclench the clove, place it on the foil, and then move it to the jeans.
- Do a similar procedure with the rest of the zipper parts.
- Secure the teeth with stitches.
The zipper slider is broken
You can fix a fly with a broken slider by replacing the latter with a working one from an unnecessary fastener. If you don't have a spare element on hand, you should get creative and use a paper clip, soft metal wire, etc. In order to choose a suitable size “dog”, you should pay attention to the back side of the slider. The number corresponding to the size of the product must be stamped on the bottom side. All that remains is to find a working element with the same number and replace the broken one with it.
Loop
You can also fix the latch using a homemade loop. Take a string (I used a ribbon) and thread it through the hole in the dog
Next, we make a turn around the base of the button, tie it with 2 knots, and trim off the excess edges. It turns out to be a loop.
Note! The loop should be the optimal width so that the button can easily fit through it.
You can't see anything under the button! To prevent the knot from constantly untying, it is worth making 2 strong knots, not a bow. Also, elastic bands or laces or elastic material are not suitable for this method. There is a risk of stretching and then the loop will not perform its function.
The zipper on my jeans keeps coming undone
0
Source:
If the zipper on your trousers constantly comes apart, for example, when bending or squatting, a simple design made from improvised means will help you avoid the inconvenience. A small metal ring or twisted piece of soft wire should be attached to the pawl and placed over the button in the fastened position. This solution to the problem is temporary, but will protect you from awkward situations for a while. Often the reason for the sudden opening of the zipper is excessive tension in the fabric at the zipper fastening point, when the jeans are small or too tight.
Ring-ring ring...
This method has been familiar to me since childhood, but for some reason I didn’t use it. But in vain. In order to fix the zipper on the trousers, we need a key ring.
The mechanism is familiar to us: we thread the ring through the hole on the tongue.
The ring is fixed on a button.
You can't see anything under the loop!
This is the easiest and most affordable way! After all, you see, in 90% of cases we carry the keys with us.
The zipper teeth are damaged
When it is impossible to unfasten a zipper due to damaged teeth, the only salvation is to replace the zipper. For short-term use, you can apply a few stitches to the area just above the break. After this, the carriage will only lower to the bartack, but will retain its function. To replace a zipper that cannot be repaired, do the following: Open the bottom of the zipper using a special sewing tool or nail scissors. Spread the side rivets and release the edges of the lock from the stopper. Release the side parts from the stitching and remove the entire zipper. Using a sewing machine, sew a new design in place of the old one, using matching threads. Recommendations for preventive maintenance will help maintain the functionality of the new lock.
How to care for zipper: prevention tips
It is easier to prevent a breakdown than to look for non-standard solutions to the problem later. Proper operation and preventive maintenance of the fastener can significantly increase its service life.
Follow these guidelines:
- Avoid getting sand, dust and other fine particles into the lock mechanism, as they will get stuck between the teeth and prevent the slider from moving normally. If grains of sand have already gotten into the cracks of the fastener, you can remove them with a brush or toothbrush.
- Protect the plastic elements of the lock from melting with an iron. One careless movement is enough for the teeth to become bent and no longer fit tightly together.
- Before washing, all zippers on clothes must be fastened and items turned inside out. This will prevent damage to the fastener and prevent the pawl from getting caught on the inside of the washing machine drum.
A damaged zipper on your trousers is not a reason to throw away your favorite item. In most cases, the breakdown can be repaired with improvised means or the functionality of the zipper can be temporarily preserved.
How to lubricate a plastic zipper to make it easier to close?
A plastic zipper, like a metal one, can be quite difficult to close after purchasing new clothes. Do not tug or pull it, otherwise you risk damaging the clasp. The best option is to lubricate the zipper.
Lubrication options for plastic zippers:
- Candle. Close the zipper and rub the candles on the back side. Shake off excess paraffin and open and close the lock several times.
- Soap. Manipulations are carried out in the same way as with candles. You just need to rub the cloves with a bar of soap.
How to lubricate a plastic zipper to make it easier to close?
Problem 5 – replacing the zipper
And the most difficult problem that can arise when using a zipper is completely replacing the fastener. In these cases, you have to rip out your clothes, and not everyone can do this at home. It is especially difficult for those who have other elements, such as buttons, next to the zipper. We want to show you how you can replace your zipper without blowing it out.
- Cut off the zipper on the side where the buttons are closest to the edge.
- Baste, and then sew one half of the zipper on this side with two lines. Its edge should be close to the buttons, without going over them, so as not to interfere with their fastening.
- On the opposite side, simply sew the new zipper onto the old part without cutting it off. Photo 3 shows the view from the reverse side.
- This is what the finished work looks like.
What life hacks for zipper repair do you use?
A regular eraser will help keep your earring in place.
mashable.com
If you put on stud earrings and accidentally lost the screw clasp, do not rush to part with the jewelry here and now.
Cut a small piece from the eraser and use it instead of a fastener (temporarily, of course). see also
17 brilliant life hacks that will come in handy in any situation
Problems with the slider
There are several common problems with the slider. The type of repair is selected according to their nature.
- Breakdown . If it is clearly visible that the slider is broken, then you can try to replace it with a new one using special tools.
Important! The above option is relevant for those types of breakdowns in which the lightning remains intact. Otherwise, you will have to replace the entire structure;
- Detachment . When the slider is torn off, but remains intact, you need to try to install it back using special tools. Some people use pliers or other non-core tools for these purposes, but when using them there is a high risk of damaging the slider.
Problems with the carriage
- She doesn't move. This is also a common problem that jeans owners often face. This phenomenon most often has only one reason - a foreign object that is stuck inside. To get rid of it, you can completely remove the carriage and shake it out. An alternative option is to use a needle and try to pry it out without having to remove the structure from the zipper. The last option is not as effective, but it can work, so you need to try it first and only then move on to more serious actions.
- It's broken . This damage is no less common. It can be caused by the fact that a person pulled the slider too hard and eventually the entire structure broke. In this case, a complete replacement of this part, which can be found in unnecessary jeans, is required. If this is not possible, then you will have to change the entire lock.
Important! In some cases, the carriage can be repaired simply by pressing both ends together. This is only possible if the structure itself has not been severely damaged.
Problems with lightning
- Jam . Very often, fabric, threads or foreign objects get stuck in the zipper. To solve this problem, just move the lock up and down and release the stuck objects. Sometimes it happens that it is impossible to move the lock before removing objects. In this case, you should loosen the carriage and remove it to get to the cause of the problem.
Important! You should be careful about removing the carriage yourself if there is fabric or threads stuck under it, because using improvised objects can damage it. In this case, you will have to completely change the lock.
- Deformation . Sometimes it happens that the teeth on the zipper remain in place, but are seriously deformed and the lock does not fit in this place. Often this is the bottom of the castle. You can correct the situation with the help of threads. A tack is made above the damaged area. As a result, it turns out that the carriage only reaches the bartack and the lock can function correctly for some time. Naturally, this is only a temporary measure, because threads from temporary fastening can get stuck in the carriage and cause new problems. As a result, you will still have to replace the entire structure.
Fly diverges (in the middle)
- This problem may be caused by a weak carriage or faulty teeth. In any case, this problem should be corrected by manually connecting the teeth and then “rolling” the carriage along them. This does not guarantee a good result, but it is fine as a temporary measure.
Note! With this method of restoration, problems may arise with the further use of the lock, so you need to be prepared for the same sudden unfastening while walking, squatting and other actions that affect the lock. That is why it is recommended to use the method only when there is no option for quickly replacing the entire structure.
Teeth do not close or are moving apart
This is one of the most common and annoying problems. First, try repeating the trick with a pencil and soap, maybe this will improve the glide and allow the teeth to close properly.
If this does not help, then something is preventing the slider from working properly. Look to see if there is any thread or fabric stuck in the lock, carefully inspect all the teeth, maybe one of them is bent. In this case, you need to straighten it with pliers, and the zipper will close normally.
What about the jacket?
There is no difference between zippers and zippers, so if suddenly something bad happens to your jacket, don’t worry! Feel free to adopt one of the listed methods. Of course, in this situation, not only the aesthetic, but also the practical side of the issue is very important. Therefore, I would still recommend contacting a specialist as soon as possible and having the latch repaired. All of the above methods are good, but it is better to protect yourself and not “joke” with your outerwear. But if, for example, the tongue of a child’s jacket is slightly damaged, and the zipper still works as it should, then a bright pin can be an unusual and original element.
Recommended: Why I rub a clove of garlic on my plate
Problem 3 – the edge of the zipper is frayed
Sometimes such a nuisance as a frayed edge of a zipper happens. And the problem is not only that it looks unaesthetic. In such a situation, fastening the zipper becomes more and more difficult every day. And if measures are not taken in time, the fastener will have to be completely replaced. And the solution is quite simple. As soon as you notice that the fabric at the edge of the zipper has begun to fray, carefully coat this area with epoxy glue. When the glue is completely dry, it will toughen the fabric and prevent it from further deterioration.
