Nothing is impossible in this world, the main thing is to set a goal. Methods used in villages will help you wash the inside of a water bottle from greens and dirt. In the old days, narrow-necked jugs were washed with eggshells, millet, nettles and other available means.
We have made a selection of 5 different ways to clean cooler bottles and 19 liter bottles.
Basic methods
When washing a container, each person uses common items.
Water
To wash the bottle, it is filled with water and left for 1-2 hours. The liquid soaks up any kind of dirt. This makes the container easier to clean.
Ershik
This is a standard device for cleaning dishes of this type. It is not recommended to use brushes made from rough materials. They may scratch the surface or damage the bottle, making it impossible to reuse.
For washing containers of wine and other liquids, preference is given to a brush made of natural fibers.
Water jet
The cleaning method is suitable for people living in a private home. If there is a hose, the bottle is washed under water pressure. To ensure washing efficiency, before starting the procedure, the container is soaked in warm water.
Soda
Baking soda powder will work. Small particles do not scratch the surface of the container, while removing dirt.
Vinegar
Table vinegar will help clean the bottle. The essence is mixed with water and poured inside. The acid contained in the liquid not only washes away dirt, but also adds shine to the product.
Sand
To clean, sand with large particles is taken and mixed with dishwashing detergent. The bottle is filled with hot water to soak the deposits, after which the liquid is drained. Then sand and detergent are poured into the container. The closed bottle is shaken until the dirt is washed off the walls. Finally, rinse with water.
Nettle
Cleaning with nettles is attractive because it is environmentally friendly and absolutely free. You won't spend a penny. In this case, the eggplant will be as good as new.
What do we have to do:
- Wear gloves to avoid burning your hands with nettles.
- Pick 1-2 mature plants.
- Coarsely chop the stems with a knife. The tops with leaves can be thrown away.
- Push the nettles into the bottle.
- Add 1 liter of cold water.
- Chat until cleansed.
Non-standard
There are times when common methods do not help to cope with the problem. In order to wash the containers, they resort to non-standard methods.
See also
TOP 4 methods of how and with what you can clean a coat at home
Newspaper or cloth
Cleaning using newspaper is as follows. It is torn into small pieces, poured into a carafe, and then a soda solution of increased thickness is added. The contents are shaken and left for some time. After a few minutes, the shaking movements are repeated. The contents of the vessel are poured out. The container is rinsed with clean water. The fabric is used in a different way. The container is filled with clean water with the addition of marsh water. As soon as the internal contents have bloomed, a piece of fabric is inserted inside.
They begin to drain the water, straightening the fabric along the walls. The person pulls the tip of the piece and thus wipes the surface. At the end, all that remains is to rinse everything with water.
Nettle
The container is filled with warm water, and the person waits for some time until the dirt falls away. Nettle leaves are placed inside and the vessel is shaken. This is done in such a way that the water rotates in the vessel along with the leaf plates. Thanks to the latter, dirt is removed from the walls of the bottle.
Rice
Cereals play the role of not only a food product, but also an excellent cleaning product. The third part of the container is filled with hot water, after which a handful of rice is added there. After adding 3 tsp. soda container is closed and shaken. After draining the contents, the container is washed with clean water. Rice grits scrape dirt and remaining liquid from the walls. Baking soda powder eliminates odor and disinfects the bottle. The method is economical, but requires time and effort.
Reasons for the appearance of greenery at the bottom of the bottle
Chemicals are very dangerous to human health, so when washing dishes intended for food, it is better to choose alternative methods of natural origin.
Due to the problem of the lack of high-quality drinking water in the water supply, especially residents of large cities use only liquid from springs or purchased in a store for drinking purposes. Under the influence of heat and light, the inside of the bottle becomes covered with a green coating. In this case, it is best to replace the container, but to save money, some consumers try to clean the container and use it further. The risk of green plaque formation increases when exposed to the following factors:
- improper care of containers;
- exposure to light;
- increased air temperature.
How to dry properly
If you have a clean container in your hands, the next problem arises - how to dry it. In practice, it turns out that using a hairdryer is unsuccessful.
There are a couple of tricks that work with plastic and glass containers.
Glass bottle
The method will require any type of paper, but preferably one that absorbs moisture well. Even kitchen towels will do. A piece of paper is rolled into a tube and placed inside. It is advisable that the end sticks out of the container, as it is needed in order to remove the paper.
Plastic
The container is turned upside down and placed on the surface. It is advisable to place something under the neck. Air should come inside, which will speed up drying.
Use of chemicals
After cleaning with aggressive chemicals, the dishes should never be used for drinking water. The water in it will only be suitable for technical consumption. You can clean a plastic bottle from green deposits like this:
- A five percent solution of hydrochloric acid is poured into the dishes and rinsed for a short time. The lid must be screwed on tightly. Next, pour out the solution and rinse the dishes thoroughly under running water.
- Pipe cleaner is poured or poured into the container and topped up with water. After 20-30 minutes, you can pour out the contents and wash the dishes.
Features of cleaning from sunflower oil
A viscous liquid is a lipid mixture that does not interact with water. Therefore, other methods and means are used for removal. Substances are selected that can penetrate the fat molecules and remove them from the surface.
See also
The best ways to care for and clean swimming pools, a review of popular vacuum cleaners
Mustard
The product is used in powder form. The bulk mixture is diluted with hot water. The proportion is as follows - for 1 liter of water take 2 tbsp. l. mustard powder. The ingredients are mixed so that there are no lumps, and the liquid is poured into the bottle up to the neck. After 2-2.5 hours, the liquid is drained and the container is rinsed with clean water. Repeated cleaning procedure will improve the effect.
Flour
The bulk mixture is used due to its ability to absorb various liquids. The bottle is completely filled with water, after which flour is added. The result should be a white liquid. The container is turned upside down so that the dirty places are covered with the solution. After a while, a handful of rice is added to the vessel. After shaking, the bottle is emptied of its contents. After washing the vessel with water and detergent, rinse.
Boiling
This method comes in handy if you have accumulated a lot of dirty containers and don’t have enough time to clean them. A large saucepan is filled with dirty vessels and filled with water to the very top. A small amount of detergent is added to the water.
The pan with the container is placed on the stove over medium heat. Boiling should be carried out for 25-35 minutes. After turning off the stove, leave the contents of the pan to cool. The container is taken out and washed with clean water. It is advisable to use a piece of laundry soap instead of detergent.
How to clean a large bottle with a narrow neck
Many of us use glass and plastic containers with a narrow neck to prepare and store various liquids. A particular problem is to wash a narrow-necked bottle from any remaining oil, syrup or wine. This can be done in several ways using available tools.
How to clean the inside of a bottle from green deposits
If left unused for a long time, a green coating may form on the inner walls of the bottle. You can remove dirt in 10 L, 19 L or 20 L bottles using various available means.
Ershik
A classic device for cleaning containers with a narrow neck. To prevent the inner surface from being damaged when cleaning, use a brush with natural bristles.
Cleaning with soda
A natural antiseptic that will remove dirt and green deposits from inside the bottle. Pour soda into a container and add a little water until a thick paste forms at the rate of half a pack of soda per 20 liters of water. Leave to act for 2-2.5 hours. To speed up the cleaning process, place a sponge inside and use a long stick to scrub the walls.
Salt and dishwashing gel
The salt will act as an abrasive, and the detergent will remove dirt. Coarse sea salt is suitable for this procedure. Pour the cleaning ingredients into the bottle and add water. Shake the contents thoroughly and leave to act for 30–40 minutes. Then rinse the container with clean water.
Pipe cleaner
The method is suitable if the bottle is used only for household needs. Drinking water from such containers is strictly prohibited. Pour pipe cleaner inside and leave for half an hour. Under the influence of the substance, the plaque will come off on its own. Then drain the contents and rinse the inner walls of the container as thoroughly as possible.
Vinegar
Mix vinegar and water in equal proportions. Pour the resulting liquid into the bottle and let it brew. Vinegar will not only remove dirt, but also add shine to the surface.
Sand
Sand acts as an abrasive. The procedure will also require hot water and dishwashing liquid.
Action plan:
- Fill the container with hot water and leave to soak.
- Drain dirty water.
- Add sand mixed with dishwashing liquid.
- Shake the bottle thoroughly to remove dirt from the sides.
- Drain the sand and rinse the container with water.
If dirt remains, repeat the procedure.
Non-standard ways to clean a bottle
If classic cleaning methods do not help, you can use non-standard methods for cleaning large containers with a narrow neck.
Rice
Regular rice scrapes dirt off the walls well. To remove not only dirt, but also to disinfect the bottle, the procedure will require soda.
Procedure:
- Fill the container 1/3 full with hot water.
- Add a few handfuls of rice.
- Add 3 tbsp there. spoons of soda.
- Close the container and shake the contents thoroughly until the dirt comes off.
- At the last stage, rinse the bottle with clean water.
How to clean a glass bottle with a narrow neck from wine
Most often, such containers have a large volume, so washing them is quite difficult due to their non-standard dimensions. To avoid any difficulties during cleaning, follow certain rules:
- Fill the bottle with water, so the dirt will fall off more easily and it will be easier to clean the surface;
- it’s good if you alternate chemical methods with washing the inner surface with warm water;
- for better results, turn the container upside down (if dimensions allow), so the plaque will fall off under its own weight;
- if the unpleasant smell remains, perhaps it is not the walls that smell, but the bottle cap, try replacing it with a new one;
- Do not experiment with large pebbles as an abrasive, as they may break the container.
How to clean a glass bottle from vegetable oil
Oil does not interact well with water, so for cleaning, choose substances that dissolve fatty compounds well.
Flour
Flour absorbs liquid well, so it will perfectly clean the inner walls of the container. You will also need a handful of rice for the procedure.
Progress:
- Fill the bottle with water.
- Add flour to obtain a white liquid.
- Soak the container upside down for 1-2 hours.
- Add rice to the mixture.
- Shake thoroughly and drain the contents.
- Rinse the container with clean water.
Features of cleaning a cooler bottle
It is important to understand that you need to clean not only the bottle, but also all parts of the cooler that come into contact with water. Read this entire article on how to clean a water cooler.
If only the water container needs washing, you can clean it using:
- citric acid;
- soda;
- vinegar;
- salt with dish gel.
The cleaning process is no different from the procedure for washing glass and other containers. The main thing is to rinse the container thoroughly and be sure to dry it completely. If there is heavy contamination, first fill the bottle with warm water.
Removing unpleasant odor from a bottle
If after use the bottle emits an unpleasant odor, pay special attention to its destruction, since it cannot be destroyed by ordinary means.
Freshly ground coffee removes unpleasant odors well. Pour the fragrant powder into a container and leave for 2-3 days. After this time, even the most unpleasant smell will disappear.
If you don't have time, try removing the smell with citrus juice. Freshly squeezed lemon, orange or grapefruit juice will do. Fill the container with water and diluted juice at the rate of 1 liter of water per 150–200 ml of juice. Let the mixture sit for 8-9 hours and then wash the container with dishwashing liquid. Repeat the procedure if necessary.
Glass
For drying, paper that absorbs moisture well or waffle towels is suitable. Roll a napkin or sheet of paper into a tube and place it in a container so that one end sticks out of the neck. Replace wet sheets with dry ones until the moisture completely disappears.
How to remove a label
The bottle will not look very aesthetically pleasing if you wash it only from the inside. The outer surface also needs cleaning. Especially if there is an old label stuck on it.
You can quickly remove the label using special products designed to dissolve adhesives. These include: Promega label, Label Off, KUDO.
If such a substance is not found, simply place the container under running hot water. Under the influence of heat, the glue will soften and be easily removed from the surface.
How to disinfect a large bottle
For long-term storage of wine or beer, the bottles must be sterilized before capping. If the containers are small, just hold them over steam or bake them in the oven. If the bottle is large, try one of the following:
- pour boiling water over the inner walls;
- order specialized steam cleaning;
- buy a disinfectant (pyrosulfite or metabiflite), dilute the drug in water according to the instructions and rinse the containers.
Please note that cork and other utensils that will come into contact with the future wine also need to be sterilized.
You can clean the surface of the bottle from plaque and dirt in several ways using household chemicals or improvised substances. When choosing the appropriate method, consider what material the container is made of. In addition, choose those ingredients that will definitely not spoil the inner surface of the container.
Did you like the article? Was she helpful?
Source: https://hoznauka.ru/v-dome/kak-otmyt-butyl.html
Methods for cleaning bottles from green deposits
Over time, a green coating forms on the bottom, despite the fact that the water is clean. Especially if it's a drinking water bottle. This cannot be avoided, since the environment in the vessel is constantly humid.
A mixture of salt and dishwashing gel
The wash is made at home using sea salt. The vessel is filled with salt and detergent. Then clean water is poured. Shake the container until the walls are completely washed. The container is left to infuse for 40 minutes, and after a specified time is washed with running water.
The bottle must be dried, as this reduces the likelihood of green deposits forming again.
Using soda
A thread is sewn to the foam sponge, its length exceeding the height of the container. It is pushed inside, while the end of the thread remains on the surface of the neck. For convenience, the end of the thread is tied around the neck.
See also
How to clean a watch at home with your own hands
The vessel is filled with soda and a small amount of water. Using a stick, the bottle is cleaned with a sponge until it is clean. The stick should also be much longer than the height of the vessel. At the end of the procedure, the canister is rinsed with plain water several times.
Beans
Regular dry beans will help remove plaque. Grains, approximately 150-250 g, are poured inside. Add 1 liter of water to the beans. The container is closed with a lid and shaken for 8-10 minutes. Stir the contents until the liquid turns a dirty green color. After this, the contents are poured out. At the end, the bottle is rinsed with clean water and dried.
Instead of beans, various cereals are taken. It could be the same rice or millet. But you will need a lot more mixture. The quantity depends on the volume of the container.
Chemical
Suitable if the bottle is not intended for storing drinking water. As a rule, containers are used to store water. In turn, the liquid is used to replenish the water level in the car washer reservoir or for washing hands in nature.
Plaque is removed with a high concentration solution of hydrochloric acid. The liquid is poured directly into the container. After this, the bottle is closed and shaken for 5-10 minutes. If the container is very dirty, the composition is left to get wet. Afterwards, the container is rinsed with clean water 2-3 times.
How to wash a bottle of greens: ways to remove plaque from the inside of plastic and glassware
Plastic is a modern material from which many household items are made, including dishes. Products made from it are budget-friendly and very convenient to use.
Thus, many people use plastic bottles to store water supplies. But over time, a green coating appears on their inner walls. This is chlorella algae. It is quite safe for human health, but you still want to get rid of it.
You can wash the bottle of greens using various means.
Traditional methods
Green plaque is a problem not only for plastic containers, but also for glass ones.
Mothers and grandmothers solved the problem of how to wash greens from a bottle using improvised means.
They used simple and cheap methods:
- The most common method is using a special brush and soda.
- Add a little dishwashing liquid or soapy water and crushed egg shells to the bottle. The lid must be closed and the liquid in the bottle must be shaken until a positive result is obtained. Then the detergent is poured out and the dishes are rinsed with clean water. In some cases, the procedure must be repeated.
- Fill the dirty dishes one-third full with water, add baking soda at the rate of half a pack per 25 liters of water. Place a piece of synthetic fabric such as nylon into the bottle and shake vigorously. To make it easier to get the fabric, you can hold it at the neck.
- Finely tear the newspaper and place it in a bowl, add a little water just to wet the paper, and shake vigorously. The method is not the most convenient, since it is then quite difficult to wash the paper out of the bottle.
- You can use clean (calcined) sand, sawdust with the addition of liquid soap, preferably laundry soap. This method may also not be to everyone’s taste due to the difficulty of washing.
- You can wash the inside of a plastic bottle with a foam sponge. To do this, tie the sponge in the middle with a long rope and push it into a container using a thin stick, add 100-200 grams of baking soda. Then you can add water and shake the bottle vigorously.
- To clean the container you will need dishwashing gel and coarse sea salt. To wash a five-liter bottle, you need to prepare a solution at the rate of 1 glass of warm water, 1 tablespoon of gel, and 2-3 tablespoons of salt. Pour the finished product into a bottle and leave to soak for an hour. Next, you need to vigorously shake the bottle and rinse it. Usually everything can be cleaned the first time, but sometimes you have to repeat the procedure. Salt acts as a soft abrasive that does not damage the walls of the cookware. What is attractive about this method is the availability of available materials and their low cost.
- A simple metal chain can be used to clean green deposits from the bottle. Filled with a small amount of water and shaken well, the chain acts as an abrasive. Its links are smooth, so they do not leave scratches.
- Beans, peas, and millet will help defeat greens. To do this, pour 100-200 grams of legumes or half a kilo of cereal into a contaminated bottle, fill it with four glasses of water and shake for 5-10 minutes. Usually after this procedure the liquid becomes green and dirty, and the dishes become clean and transparent.
- You can wash greens in a plastic bottle with dry mustard. Three tablespoons are enough for a five-liter container. First you need to shake the bottle, and then add water and shake with it. If the contamination is very strong, you should leave it to soak for a while and then wash it clean.
- Dry pharmacy nettle is also used for cleaning bottles. A handful of grass is poured into the bowl and two glasses of water are added. Then you need to shake the bottle vigorously. You can enhance the effectiveness of the product with the help of another component - river sand. You can replace nettle with dry yarrow. This herb has a disinfecting effect, so it also fights harmful bacteria. Fresh nettle is no less effective. This “washcloth” is good to use on hikes or at the dacha. The crushed leaves and stems are placed in a bottle, a glass or two of water is added and then you need to proceed as in the other methods described.
Use of chemicals
After cleaning with aggressive chemicals, the dishes should never be used for drinking water. The water in it will only be suitable for technical consumption. You can clean a plastic bottle from green deposits like this:
- A five percent solution of hydrochloric acid is poured into the dishes and rinsed for a short time. The lid must be screwed on tightly. Next, pour out the solution and rinse the dishes thoroughly under running water.
- Pipe cleaner is poured or poured into the container and topped up with water. After 20-30 minutes, you can pour out the contents and wash the dishes.
These methods are also suitable for washing glassware. Unlike plastic, it can be used to store drinking water, but first you need to rinse it for a long time.
https://www.youtube.com/watch?v=j2m2ymeuwcE
Please remember that not all plastic utensils are recyclable. It is necessary to pay attention to the instructions, composition of the material and expiration date.
Source: https://nashdom.life/mojka/kak-otmyt-plastikovuyu-butyl-ot-zeleni-iznutri
Method 5: using a germicidal UV lamp
If you have a UV lamp at home (aquarium owners often purchase them), this is a wonderful device for disinfecting dirty bottles that have begun to “bloom.” We simply clean the bottle using one of the methods listed above, let it dry, and then place a bactericidal lamp inside the flask for 15-20 minutes. The device will do its job - under the influence of UV radiation, various bacteria and microbes present on the walls of the flask will be neutralized, and their further reproduction will be prevented.
Simple but effective methods
In cases where the contamination is completely fresh or does not have excess density, a container with a narrow neck can be cleaned using one of the following methods:
- Ershik.
It is clear that this can only be a special device with an extremely long handle and shaggy dense pile. It passes through the mouth of the product without any problems and allows you to wipe off even the most stubborn stains. - Jet pressure. If you have a watering hose at your disposal, then by adjusting the intensity of the water supply you can again perfectly clean the insides of the bottle.
- Detergents. The freshest stains can be easily washed off with the most common dishwashing detergents. The main thing is not just to pour the product into the container, but also to carefully shake it so that the action affects all dirty areas.
- Soda.
If you simply pour baking soda into a bottle of water, it will not give virtually any result. The composition will slightly soften the sediment, but will not get rid of it one hundred percent. This approach must be combined with mechanical action, for example, working with a brush or sponge on a holder. - Vinegar. This product will not only dissolve sediment, plaque or scale, making it easier to remove, but will also disinfect the container. True, it is necessary to resort to this approach only if time is not pressing and after cleaning the product can be aired for a long time in fresh air, otherwise traces of a pungent aroma will remain for some time.
- Fine sand.
First, pour in small sand that has been calcined on a baking sheet, then pour in water. If you actively shake the container, it will clean perfectly. The main thing is to make sure after this that all the sand has been washed away.
Some owners try to clean the bottle with buckwheat, but in practice this method is not as good as it seems. The food component softens under the influence of water, resulting in its particles peeling off and sticking to the glass. They can be virtually invisible until they begin to rot and spoil the taste and smell of the drink stored in the container.
Sometimes it is tempting to reuse an attractive bottle of olive or sunflower oil.
It can be difficult to clean forgotten containers that stink of musty odor and are covered with an old layer of fat. Oil is oil. But there are still a couple of proven folk remedies that are able to cope with the pungent odor and ingrained fat.
Simple methods to wash a bottle of sunflower or olive oil:
Method 1: Heat a solution with a high concentration of soda. The temperature must be high, but not so high that the bottle bursts. Pour the solution into a bottle and let it sit for 12 hours.
After pouring out the contents, you will make sure that the aroma and fat seem to have never been there.
A little secret: if you put an iron chain into a bottle with the substance and then shake it, it will act as a brush, knocking off the remaining oil from the walls. Rice will act in a similar way (literally a couple of tablespoons).
Method 2: Similar to salt, use vinegar or lemon solution, while adding as much vinegar or citric acid as possible. In this case, it is better to quit the bottle for a day.
Method 3: If you need to remove the smell as quickly as possible, you can use mustard powder.
For one bottle, one tablespoon of this powder and 1/4 part of warm water is enough. Shake the bottle well for 5 - 10 minutes. After this, pour out the water and make sure that the smell is completely removed. If not, it’s worth repeating the operation again.
Method 4: Add a few teaspoons of coffee grounds and warm water to the bottle. Shake the container well, then pour out the water and rinse. Pour fresh warm water and add a tablespoon of soda.
Leave for a couple of hours.
Method 5: Use water from under the potatoes “in their uniforms”. After boiling the potatoes, warm water should be poured into a bottle and left for several hours.
Method 6: From time to time, bottles are difficult to wash even with a brush with a long handle. In these options, you need to pour water in which the washing powder is dissolved into a bottle and let it sit for as long as possible.
Method 7: Contaminated bottles are quickly cleaned using a solution of vinegar and salt.
Method 8: There is also the most common way to quickly wash a bottle - ordinary sand. To do this, you need to pour a tablespoon of sand into the bottle, pour in water and shake well.
The bottle will become clean.
How to prolong the cleanliness of the device after cleaning?
After the outer part of the cooler is cleaned, you can move on to removing dirt from the surfaces located inside the device. For this purpose, special solutions are used.
One of the most effective and popular cleaning options is the use of citric acid. It allows you to soften the plaque formed on the walls of the bottle and other components of the unit, disinfect the surface, and eliminate unpleasant odors. Moreover, this substance is completely safe for the cooler itself.
To prepare the cleaning solution, take citric acid at the rate of 200 g of dry matter per 10 liters of water. The resulting product is poured into the device, after which it is plugged into the network. After heating, the cooler is turned off and left for 5-6 hours. After the specified time, the liquid is completely drained and the device is washed with clean water. If necessary, the procedure can be repeated.
A solution of citric acid copes well with scale and also eliminates pathogenic microflora that forms in the device over time
Along with the substances that every housewife has in her home, you can use a special preparation for cleaning - guanopolysept. It does not contain chlorine and aldehydes and is completely safe for humans in small concentrations.
Mode of application:
- The substance is mixed with water following the instructions.
- After preparation, the solution is immediately poured into the cooler and plugged in.
- Water is periodically drained through taps into the tank.
- In this mode, with slight contamination, the device should operate for at least a day; if necessary, the duration of cleaning can be increased.
We suggest you familiarize yourself with how and how to clean a gas stove from grease and carbon deposits at home
Afterwards, the cleaning liquid is drained, and the cooler itself is thoroughly washed with water until the foreign taste completely disappears.
Keeping your cooler clean between cleanings is not that difficult:
- Every time you replace an old bottle with a new one, wash the bottle receptacle
- After removing the protective film from the new bottle, wipe the neck with an alcohol wipe or damp cloth.
- Disinfect the device once every 1-2 months
These simple precautions will minimize the entry of dust and bacteria from the environment into the device.
We wash the outside of the container
- Do everything by hand. Do not put old bottles and decanters in the dishwasher. High temperatures and vibration can cause the neck to crack and split.
- If you are convinced of the durability of the products you are using, you can put them in the dishwasher on the savory cycle.
Be sure to use a pill of good dishwashing detergent. - Rinse an antique container made of cut glass or crystal in a plastic basin so as not to break it. If you don’t have one, place a rubber mat or fluffy towel on the bottom of the iron sink.
- For high-quality cleaning, use a sponge and warm water with non-aggressive dish soap.
We recommend: How to quickly and correctly wash foam ceiling tiles in the kitchen
External cleaning
After the water has been completely drained from the device, you can begin the cleaning procedure. It is recommended to start by removing contaminants located on the outer surface.
To treat parts, you can use dishwashing detergents, soap and other solutions (for example, with the addition of iodine or ammonia), as well as special substances for cleaning the cooler.
It is recommended to use the following tools and additional equipment:
- waterproof mat;
- container for collecting water;
- soft brush or sponge for washing;
- a small brush for cleaning taps and pipes (can be replaced with a wire with cotton wool);
- dry lint-free cloth;
- latex gloves.
First of all, start cleaning the taps. They are dismantled and thoroughly washed outside and inside using special brushes.
Dismantling and cleaning the taps is one of the main stages of comprehensive cleaning of the device.
The next step is cleaning the receiver to collect residual liquid (drip pan). This is where a large number of microbes accumulate. Afterwards, the body is washed and the area where the bottle is attached is sanitized.
We suggest you familiarize yourself with How to clean the oven from grease and carbon deposits at home? How to clean the oven from old burnt fat?
After the bottle receiver is removed, access to the tank will open, at the bottom of which there is a divider. It also needs to be dismantled and washed well, first with a soapy solution, then with clean water.
When all components are cleaned, the previously dismantled parts must be reassembled in reverse order. Then wipe the body again with a damp cloth, and so that there are no streaks left, wipe it with a dry one.
Preventive actions
To ensure that the water in the cooler remains fresh after cleaning for as long as possible, preventive measures should be carried out regularly:
- Each time you change a bottle, wipe the bottle receptacle from dust with a clean, damp cloth.
- At least once a week, clean the taps and drain the water from the pan.
- Before installing a new tank, wash your hands well with soap and water.
- Be sure to remove the security label. If this is not done, pieces of paper may fall into the cold water container.
- Never place a container of tap water in the cooler. Remember that the device does not have filters for cleaning. Also, untreated water will contribute to the rapid formation of scale in the hot water compartment.
Changing the bottle should only be done with clean hands and the bottle receiver must be cleaned
According to experts, the cooler should be washed at least once every 3 months. After all, timely and proper care of the device not only extends its service life, but also allows you to use truly high-quality water.
Detergent and rag
A brush will not help clean the sides of the eggplant. But an ordinary rag and dishwashing detergent - yes.
Try cleaning the container from the inside of greens as follows:
- Fill a bottle with a small amount of hot water.
- Add a few drops of dish soap.
- Throw a cotton rag inside.
- Shake until clean.
- Drain dirty water.
- Use tongs to remove the rag.
- Rinse the vessel several times.