Installing a shower stall is only half the battle. You need to learn how to properly care for her. After all, the bathroom is the wettest place in the house, where various bacteria and microorganisms multiply very quickly. To prevent this from happening in the shower stall, as well as to keep the glass clean and streak-free, you need to read our article.
Forest clean "Antinalet"
The product from Forest clean was created in Russia according to European quality standards and is intended for cleaning shower cabins, bathtubs and plumbing fixtures from stubborn deposits.
Concentrated and effective product is safe for your health and the environment. In the production of this product, German technologies and safe and biodegradable raw materials are used.
Forest clean “Antinalet” product acts on the limescale that settles on the walls of shower cabins and dissolves it without a trace. The spray does not leave streaks and has an unobtrusive pleasant aroma. The big advantage of the product is its price.
Forest clean “Antinalet” cleaning product.
How to quickly clean at home?
The shower stall consists of several parts made of different materials, so an integrated approach is used to clean contaminants. This takes into account the material of manufacture, as well as the presence of a hydromassage panel and other devices.
For cleaning use:
- a synthetic sponge or a special brush for washing;
- glass scraper with rubber coating;
- microfiber cloth;
- cleaning products in the form of sprays, pastes and creams.
For cleaning it is not recommended to use :
- sponge made of metal threads;
- sharp scraper;
- cleaning products with ammonia and acetone;
- abrasive powders.
If daily care is observed, general cleaning can be done once a month . Cleaning usually starts with walls and doors, then washes faucets, handles and hinges.
At the very last stage, the tray is cleaned. Some shower stalls have a base that is covered with a special screen - it is wiped last.
Faucets, watering cans, hoses and fixtures also require maintenance. They are washed to remove limescale, stains and rust; after washing, all surfaces are wiped and polished.
Getting rid of limescale
Limescale stains on surfaces are formed due to poor-quality hard water. To prevent their occurrence, it is best to use a reverse osmosis filter. It traps salt particles and other impurities that cause plaque.
But not everyone can afford such a device. Therefore, you have to use various cleaning products. Paste-like substances, as well as detergent compositions in the form of cream or spray, will come to the aid of housewives.
Shower cabins are usually equipped with acrylic trays . Which in their composition and production methods are no different from ordinary acrylic bathtubs.
In order to find out the most complete information on how to clean the acrylic surfaces of booths from limescale, yellow stains and rust , we recommend that you visit our special article .
Removing limescale stains is a complex process and requires a lot of effort. However, it is not recommended to use brushes with hard bristles and chlorine-containing liquids . They can ruin the surface. Therefore, it is better to use gels or sprays that contain mild acids. For example Acrilan and Cif cream. They will be discussed below.
The principle of use for all household chemicals is the same. The product is applied to limescale stains, left for a while, and then wiped with a soft sponge and rinsed off with cold water. If traces remain as a result, the procedure is repeated again.
Particular attention should be paid to
shower cabins with saunas equipped with steam generators . In addition to washing the surfaces of the cabins, you also need to clean the scale from the heating elements of the steam generator. This is done quite simply. Citric acid is poured into the tank and the system is turned on at maximum temperature. After 5 minutes of operation, you need to drain the water from the tank. The scale has been removed.
How can you clean glass from soap stains?
Some booths are made entirely of glass, while others only have glass doors. In any case, soap stains are the main enemy of housewives.
After all, after almost every shower, stains remain. How to remove plaque from the glass in the shower and what to clean the doors with?
Special sprays are used to clean glass surfaces. They are applied to the glass and then removed using a rubberized scraper, which allows you to remove stains that are inevitable when using a rag.
Examples of such compositions include: Tytan, Mellerud and other specialized substances.
After washing glass surfaces, it is recommended to polish them using window spray and a microfiber cloth.
To prevent the appearance of soap film, special water-repellent substances are used. They will be discussed below.
What chemical is better to wash?
Chemicals for cleaning bathtubs and showers are selected based on the type of contamination and the quality of the material from which the plumbing fixtures are made. When cleaning glass doors and walls, it is better not to use powder cleaners; they damage the surface and leave scratches.
“Acrilan” - has a rather pungent odor, but has an antibacterial effect, suitable for acrylic and plastic pallets.
The product is used to combat soap film, grease, rust, fungus and salt deposits. Does not leave streaks or scratches . Acrylan is applied to the fabric or directly to the surface, rubbed in and left for a while. Then rinse with water and wipe the booth dry.
“Cif” is available in the form of a soft cream without abrasive particles in the composition. Does not harm acrylic, enamel and metal coatings.
Removes lime, rust, soap scum and other stubborn stains. Available in the form of a spray and cream, and also has several options with various flavored fragrances.
“Cillit Bang” - the product is presented in various forms: foam, liquid and spray. For each type of pollution, a separate composition is presented: “anti-grease”, “anti-lime”, “black mold” and “soap stains”.
The detergent is applied to the surface, left to interact more effectively with the dirt, and then washed off. Also suitable for cleaning glass doors, chrome faucets and handles.
Amway is a good detergent for cleaning surfaces from limescale. Its peculiarity is its absolutely harmless composition. The substance does not need to be washed off at all.
It is simply applied to problem areas and left for a long time. Can be used daily as a composition for the prevention of pollution.
Antiplaque spray is a product for cleaning acrylic bathtubs and showers. Received recognition from users due to its ease of use. As the name suggests, its main purpose is to clean surfaces from limescale.
Thanks to its acidic composition, it quickly decomposes dirt. At the same time, it is quite gentle on the coating, which cannot be said about the skin of your hands. Therefore, it should only be used with rubber gloves.
How to clean with folk remedies?
Along with chemicals, folk recipes are used for cleaning. They most often contain ingredients that can be found in every home. At the same time, methods of washing surfaces are no less effective than using household chemicals. What and how to wash cabins from limescale at home?
The shower stall is a place of high humidity, and sealant in the corners is an excellent environment for the development of fungus. It is the cause of many diseases, so it is very important to eliminate it in time. In our special article we will tell you how to get rid of mold and prevent it from reappearing.
Remove dirt with ammonia
Ammonia copes well with traces of soap suds and dirt. To prepare a solution, 2-3 tbsp. l. ammonia is mixed with a liter of water. Use a soft brush to treat areas of contamination, then rinse with plenty of water and wipe dry with a microfiber cloth.
This method must be used very carefully. The composition should not be left for longer than 2-3 minutes . Otherwise, the surface may become unusable.
Hydrogen peroxide and soda
The combination of ingredients helps get rid of limescale and mold that forms in the corners of the cabin.
To perform the procedure, baking soda is poured onto the contaminated areas and left for half an hour. Clean the surface with a sponge, and then spray hydrogen peroxide onto the remaining powder and leave to dry. The mixture is wiped with a dry cloth and the cabin is rinsed with water.
Lemon acid
Cleans glass surfaces of shower stalls. Dissolve 20 grams in 200 ml of warm water. powder.
The solution is sprayed onto the doors and walls with a spray bottle, then left for 15 minutes. Afterwards, wash off the mixture with water and wipe the glass dry.
To wash the tray, folk remedies should be selected very carefully . Various materials can deteriorate when in contact with acid or alcohol, and stains and cracks form on the surface:
- acrylic trays are cleaned using toothpaste or silver polish; vinegar with citric acid saves rust and lime;
- the enameled surface is washed using gels and powders, since it is not capricious, and rust is removed using turpentine mixed with salt;
- stainless steel is strong and durable; for cleaning use a mixture of chalk and soap in equal proportions;
- chrome faucets are wrapped in a cloth previously soaked in vinegar or citric acid to remove lime deposits.
Before using traditional recipes, it is recommended to test the product on a small area of the shower stall to avoid damage to the surface layer.
MEINE LIEBE
MEINE LIEBE Shower and Bathtub Cleaner, made in Russia, is intended for acrylic products, although it can be used to clean items made from other materials. It perfectly dissolves contaminants such as mold, mildew, and limescale on the walls of shower cabins, is easily washed off, and leaves clean and transparent surfaces after rinsing.
The composition of the product includes a complex of fruit acids that are safe for use and does not contain chlorine. There is no strong odor, it produces a fruity, light aroma. Benefits of shower cleaner:
- Spray format (facilitates uniform application of the product).
- Affordable price (check the current price on Yandex.Market).
- Manufactured under the control of the German company GRUNLAB GMBH.
MEINE LIEBE shower and bath cleaner.
General cleaning of plumbing
Scheduled cleaning is performed every 7-10 days. The frequency of the procedure depends on the intensity of use of the device by household members.
In principle, if you adhere to daily care, then soap stains, white chlorine stains and other contaminants on the walls will be present in minimal quantities
Regular ablution without the use of detergents is not able to provide the required result. Therefore, when carrying out a general cleaning, it is mandatory to use detergents for shower cabins.
Key points to consider when carrying out general cleaning:
- Removing limescale . Cream and paste products based on fruit acids cope best with this task. They easily dissolve dirt, but at the same time prevent fading or, conversely, darkening of the surface.
- Cleaning cabin glass . Caring for transparent glass is not much different from the technology for treating any glass surface. The selected product is applied by spraying onto the walls of the cabin and left for 5-7 minutes, after which it is wiped clean with a dry piece of lint-free cloth.
- Cleaning the cabin pan . When processing acrylic pallets, in order not to scratch the smooth walls, use cleaning agents that have a whitening effect. They do not contain abrasive particles. It is recommended to treat stone pallets with a steam cleaner, using a minimum of “chemicals” that can cause darkening of the stone. For enamel trays, cream- and gel-like products such as “Komet” and “Pemolux” are best suited.
- Getting rid of mold . You can achieve results when eliminating mold only by using chlorine-based compounds. To do this, black spots are treated with “chemistry” and left for 30-40 minutes so that the product penetrates into the pores and cracks.
In cabins where the walls are tiled, it is better to use concentrated compounds designed to care for tiles to remove dirt.
When processing facing materials, it is necessary to treat the seams between the tiles with special care, since they are often the breeding ground for mold.
Instructions for using the product are indicated on the packaging; usually it is applied to the surface of the shower stall and left for some time so that the frozen dirt is thoroughly softened
When you use “chemistry” when treating the surface, make sure that there are no small children or pets nearby, and that the room itself is well ventilated.
It is recommended to work with chemical detergents wearing thick household gloves.
It is constantly necessary to monitor the condition of taps, nozzles, shower heads and other metal parts. They may become covered with calcium deposits. Treatment with concentrated compounds designed to eliminate any kind of plaque helps to successfully cope with this task.
Poor quality water can even clog the holes of nozzles and showers.
The easiest way to clear clogged holes in a shower head is mechanical, which involves using a needle or sharpened toothpick.
After mechanical cleaning, the watering can should be additionally soaked in a vinegar solution. To do this, the divider is lowered for 30-60 minutes into a container filled with vinegar solution diluted with water in a 1:1 ratio.
The filters installed at the inlet also require maintenance. In order for filter systems to efficiently perform their functions, it is necessary to clean their elements from time to time, and, if necessary, completely replace them with new ones.
In the future, the use of hydrophobic compounds will help make everyday care easier. They are applied to the plumbing fixtures at the final stage of cleaning, evenly distributed over the dry surface.
After hardening, they form an invisible water-repellent film, thanks to which housewives have to return less and less to the problem of having to clean their plumbing fixtures from soap and limescale deposits.
Tytan
Tytan foam cleaner for cleaning the walls of shower cabins and trays is made in Poland. Designed for bathrooms, showers, shower trays, but can be used on all bathroom surfaces.
Tytan cleaner perfectly dissolves stubborn limescale deposits, soap marks and other contaminants, and is active against bacteria. After cleaning, the walls of the shower cabin become transparent and shiny, and the spray leaves behind a light aroma.
The spray method makes cleaning easier by distributing the product evenly, without scratching smooth walls and preventing foam from quickly flowing down. You can read reviews and find out the current price using this link.
Foam cleaner for cleaning the walls and trays of Tytan shower cabins.
Stages of cleaning the cabin
Wash the walls
First, we always start by washing the walls of the shower stall. Use soft sponges and any of the above products for this. If the dirt is very strong, then you can leave the product for a few minutes and then rinse with warm water.
Cleaning the doors
Glass doors can be cleaned using any glass cleaner, and plastic doors can be cleaned with polymer cleaners. Use a rubber squeegee to scoop up the applied liquid and wipe the doors with a dry microfiber cloth. This way you can avoid divorces.
Washing the pallet
First, rinse the tray from sand and small debris (if any), then apply a cleaning agent to its surface and let it sit for a couple of minutes. Most pallets are made of acrylic, which is easy to clean. The above products are suitable for different materials from which the pallet can be made, so do not be afraid to use any of them.
If the contamination is very strong, then the product can be left for a longer time, and then clean the tray with a synthetic brush. When you wash off the water with deposits, wipe the pan dry so that there are no water stains left.
Buzil Bucasan Trendy T464
The concentrated product, produced in Germany, is intended for surfaces of various structures, including plastic and acrylic. Buzil is also effective in cold water and has an antibacterial effect.
Buzil is used sparingly because it is a concentrate; diluting the product depending on the degree of contamination allows you to regulate its consumption. Perfectly cleans old deposits, streaks, and creates a water-repellent film. After application, the surfaces acquire a radiant appearance. The aroma is non-aggressive, pleasant.
Cleaning agent Buzil Bucasan Trendy T464.
Prevention and proper care
Every housewife knows that fresh stains are much easier to clean off than old lime deposits and soap film. Therefore, it is important to pay attention to prevention, daily care and cleaning of the shower stall. How to properly care for her?
Daily Activities:
- after taking a shower, it is recommended to wash off the remaining soap scum from all surfaces: first with hot and then with cold water;
- if plain water does not help, use liquid dishwashing detergent;
- To get rid of water drips that leave whitish spots, wipe the surfaces of the shower stall dry with a microfiber cloth.
Of course, carrying out such procedures after each shower takes a lot of free time. However, to maintain order, such actions are simply necessary. If you are short on time, you can stick to a weekly routine:
- clean the booth using gels or creams, applying them to the surface and leaving them for a while;
- use sprays to clean glass doors, removing residues with a special window scraper;
- rub chrome parts with creams;
- wipe all surfaces dry.
After weekly cleaning, deep cleaning may not be necessary, which will require less effort and time. At the same time, prevention methods will also free up time for rest and extend the life of household appliances:
- to combat mold, regularly ventilate the bathroom and also check the operation of the ventilation system;
- use high-quality sealant to prevent the formation of fungus;
- to avoid the appearance of limescale and salt deposits, install a filter to purify the water;
- during cleaning, use antibacterial agents to prevent the appearance of germs and mold;
- leave the shower door open for ventilation.
Considering that the purchase of new equipment entails significant costs, preventive measures will help save the family budget . At the same time, the absence of fungus and mold will have a positive effect on the health of household members.
Water-repellent coatings
Another equally effective method of preventing stains on glass doors is the use of water-repellent agents against drops. Dust, together with water and soap suds, settles on the surface of the glass, leaving whitish streaks and dirty spots.
Before and after applying hydrophobic coating
Household chemicals help clean glass doors, but do not protect against new ones.
The water repellent is a hydrophobic coating for glass in liquid form, which is also called “anti-drop”. After applying it, the water simply rolls over the glossy surface, leaving no traces. The hydrophobic coating protects not only from water, but also from dirt. The product contains three components that are mixed before application. It does not contain harmful solvents and is therefore safe to use.
This universal product has many advantages:
- easy to apply, no need to use special tools;
- repels water, dirt and oil, and also protects against dust;
- does not affect the structure of the glass and does not interfere with the penetration of light;
- suitable for glass, ceramics and earthenware;
- one coating lasts for approximately one year, depending on the operating conditions of the glass surface.
Application of a hydrophobic coating is carried out in several stages:
- For work, prepare microfiber rags and a piece of non-woven fabric in advance.
- The room temperature should not be lower than 10°C.
- The surface is washed and degreased.
- Apply the water-repellent agent using a piece of cloth.
- After obtaining a matte film on the surface of the glass, it is polished using microfiber.
Most often, water-repellent products are sold complete with a cleaning agent. First, a detergent base is applied, then a hydrophobic finishing layer.
NORDLAND
Bathroom liquid made in Germany. Designed for disinfection and cleaning of bathroom surfaces, including shower cabins.
NORDLAND product is environmentally friendly; the raw materials are based on plant materials and oils. Phyto-spray does not contain aggressive surfactants, chlorine, phosphates, it is biodegradable. Cleans surfaces from rust, limescale, and fights bacteria. We suggest you find out the current price on Yandex.Market.
NORDLAND, phyto-spray for cleaning shower cabins and acrylic bathtubs.
Household equipment
When you have an idea about the best way to clean the shower glass, the process becomes much easier. However, chemical composition is not enough to carry out cleaning; you need to have good household equipment on hand. Do not rub glass with steel wool or hard sponges - the smooth surface will be scratched.
To avoid unpleasant moments, you need to stock up on:
- an old toothbrush;
- soft napkins;
- rubber sponges;
- rubber scrapers.
Sponges and scrapers will help get rid of dirt and stains on the shower glass. A toothbrush is good at cleaning stubborn dirt.
UNICUM
UNICUM is produced in Russia for the care of shower cabins, made in the form of a spray, which facilitates better application to the walls of shower cabins.
Created specifically for acrylic, plastic bathtubs and showers. Dissolves salt deposits very well, removes rust, soap scum, mildew and mold.
It has disinfecting properties and protects the surface from new contaminants, as it creates a special protective ultra-thin layer. You can find current prices on Yandex Market.
Unicum, a cleaner for acrylic bathtubs and showers.
Glass surfaces
Caring for the glass surfaces of shower cabins does not involve the use of scratching abrasives or chemically active agents.
Experts recommend giving preference to the following compositions:
- Tilex Fresh-Shower;
- Luxus “Clean Bath”;
- Frosh Essig Reiniger;
- spray "Mr. Muscle";
- Amway.
The easiest way to clean tempered shower glass is with OROfresh, Luxus, Delu and Mister Muscle. The surface washed with this product is rinsed with clean water and wiped dry with a piece of soft cloth.
To clean expensive shower stalls and hydroboxes with glass doors and walls, it is allowed to use products that are intended for washing mirror surfaces or windows.
Himitek Polycor-Gel
Himitek cleaning gel, produced in Russia, is designed to clean shower stalls, but also other various bathroom surfaces. The thick consistency holds the gel well on vertical surfaces.
The gel is gentle on chrome surfaces due to the presence of orthophosphoric acid in its composition. The product is effective against limescale, rust, and stubborn salt deposits formed when using hard water.
Himitek Polycor-Gel is a hypoallergenic substance, which is especially important for people with sensitive skin and allergies. Leaves a pleasant aroma after use.
Himitek Polycor-gel, acid concentrate.
Methods for cleaning glass
It is necessary to use only mild products that do not leave any scratches. This not only increases the durability of operation, but also preserves the appearance of the cabin. For glass surfaces, spray products are optimal. There are several popular methods:
- Vinegar. A regular plastic bottle will do. Two tablespoons of table vinegar are added to the water. Using a spray bottle, the liquid is sprayed onto the glass. Then you need to wait 30 minutes. And rinse everything thoroughly with warm water.
- You may not like the vinegar option due to the unpleasant smell. Therefore, it is replaced with citric acid. One sachet is enough. The solution is sprayed onto the glass. It effectively fights scale due to hard water.
- The glass is wiped with a cloth soaked in hydrogen peroxide.
For persistent stains, the following recipe is used: a mixture of liquid glycerin, ammonia and water effectively copes with the defect. Also, the cleanliness lasts much longer in the future. And for a slight shine, use regular glass sprays. But it is important to pay attention to the quality of the napkins. They should be well compressed. But do not scratch the surface. Cotton napkins or high-quality microfiber wipes work well. If it is not possible to clean the glass, then scrapers are used.
Synergetic for baths, sinks, showers
The cleaning product of the famous Synergetic brand is made in Russia and is an environmentally friendly and hypoallergenic substance. Contains natural acids (citric, glycolic and lactic), disinfects the surface, destroys unpleasant odors.
Synergetic concentrate is suitable for surfaces resistant to acidic agents, destroys rust and deposits even in cold water, and does not contain dyes. Oils of bergamot, sandalwood, mint, lemon will create an atmosphere of freshness in your room.
Synergetic, cleaning product for bathtubs, sinks, showers.
Plastic surfaces
The plastic elements of a multifunctional plumbing fixture are much heavier than glass and can be washed and cleaned, which is due to the structural ability of such a material to absorb various types of contaminants.
However, plastic shower cabins are more affordable, which is why they are most widespread.
When choosing a cleaning agent or detergent, it is necessary to avoid formulations with solvents, formic acid and formaldehyde, which can damage the surface.
Caring for a plastic corner shower stall is very difficult, since this design requires regular cleaning in order to prevent contamination of the joint space and loss of its presentable appearance.
It is advisable to clean hard-to-reach places and seams using a household steam cleaner. Using a hot steam jet, it is possible to almost instantly remove even old lime deposits and significant dirt. To care for plastic surfaces, it is not recommended to use abrasive products, as well as substances containing acetone, coloring pigments and alkalis.
When cleaning plastic shower walls and doors, only soft cloths or sponges should be used that are not capable of leaving scratches on such surfaces.
Bagi Akrilan, a special spray for updating shower cabins
A surface cleaner from the famous brand Baghi (Israel) perfectly treats all surfaces in the bathroom. The foam perfectly and effortlessly cleans old stains, plaque, rust from acrylic surfaces, ceramics, plastic, and gets rid of fungus and mold.
After treatment with Acrilan spray, the surfaces are renewed and acquire a protective film, as a result of which the surfaces remain clean for a long time. Find out the price now.
Bugs Akrilan, spray for cleaning shower cabins.
General recommendations
It is best to wash glass shower cabins with a rubber or polyurethane scraper, which is capable of driving water down, as well as a melamine sponge, which is excellent at removing plaque or greasy marks. Heavy stains can be removed with special pastes and thick cream formulations, and light deposits on the surface can be cleaned with any liquid dishwashing detergent.
Using ordinary table vinegar, you can easily and quickly soften limescale, as well as restore the mobility of metal elements, clean chrome or nickel-plated devices, hoses and rubber waterproofing gaskets from salts.
In this case, table vinegar should be applied for a couple of hours.
Various industrial fungicides can help get rid of mold in the shower stall; before using them, you should study the composition and carefully read the manufacturer’s recommendations.
Some folk remedies also help remove mold and fungi, including soda, table vinegar, vodka, and a strong solution based on crushed laundry soap.
To prevent the appearance of mold and mildew in the bathroom, it is extremely important to very carefully monitor the humidity level, as well as create forced ventilation. Among other things, the cleaned or washed surface must be wiped dry with a non-woven material.
Pro-Brite, Acrylic Cleaner
The Pro-Brite Acrylic Cleaner is made in Russia and belongs to the famous Pro-Brite brand. The spray is intended for the shower stall and all items in the bathroom. The spray substance is concentrated and retains its properties when frozen.
It is effective in cleaning from lime and soap deposits, grease and other persistent contaminants, and destroys foreign odors. Leaves behind shine and shine. You can find current prices here.
Pro-Brite Acrylic Cleaner.
