Is it possible to wash natural fur at home and how to do it

Washing fur coats at home

In order to know how to wash fur and perform this procedure correctly, you must adhere to some rules.
So, first of all, remember that products made from natural fur are strictly prohibited from being washed in a washing machine. The fact is that machine washing can easily ruin them, so wash furs only by hand. This procedure must be performed in a large bath using a large amount of water. In this case, you will need to use exclusively liquid detergents intended for washing wool, mohair items or for delicate washing. This limitation is set so that the pile on the fur coat does not get tangled or rolled up.

In addition, it is prohibited to apply significant force to fur products during washing. For example, they cannot be rubbed like fabric products. In this case, the temperature of the water in the container should be equal to the temperature of fresh milk. Before starting the procedure, you need to wet the fur well, for which you need to keep the fur coat or jacket in water for 10-15 minutes.

In this case, during washing, you need to place sticks crosswise on the bathtub or place a small bench. This way, you can place your fur items on them to allow excess water to drain away.

Under no circumstances should you leave unwashed washing powder on the fur, which can ruin it; you should rinse it in warm water and then in cold water. In addition to cleanliness, this procedure can add shine.

After rinsing, the fur coat will need to be allowed to drain over the bathtub. Next, it is hung on wide, strong hangers that can withstand the heavy weight of the product. The fur coat should be dried away from direct exposure to sunlight, and during the drying process it must be constantly combed in all directions, giving it shape.

Despite the fact that almost all guides on how to wash a jacket with fur prohibit washing natural products in a washing machine, you can easily wash a synthetic product in it. To do this, place it in a cloth bag or pillowcase and wash it on a delicate cycle using washing powder designed for washing mohair or woolen items. Such items must be rinsed at 500 rpm.

Suede restoration

In conclusion, we will look at how you can restore suede after washing - like faux fur, it is very popular. Collars, bags, and cuffs for outerwear are often made from it. If it happens that the thing is still damaged and roughened, it is quite possible to restore it. To do this, we need a solution of vinegar (3 tablespoons) and a liter of water. First, the product must be washed in water - a warm solution with soap. Water - only warm and not hot, wash quickly, without soaking, then immediately rinse with vinegar. If the suede is very rough, then after washing it can be wiped with a rag moistened with this solution - a teaspoon of glycerin and a liter of water.

Fur is a complex material, but if we decide to purchase it, we need to decide right away - either we will periodically spend money on dry cleaning, in which case it will not suffer at all, or we will do the washing ourselves. In the second case, it is necessary to acquire special knowledge that will help us not spoil the thing.

Traditional methods

All these methods have been successfully tried by many women; they help clean fur without contact with water, without spoiling it. Some methods will require time and patience, but the results are worth it.

You can use flour, but not traditional wheat, but rye or oatmeal. Oatmeal crushed in a blender or coffee grinder will also work.

1. It is necessary to pour flour into a large basin so that it occupies 1/3 of the space.
2. Place the contaminated item in a basin and roll it in flour on all sides.
3. You should act energetically, so it would be better to carry out the procedure in the bathroom.
4. Shake the flour off the product.
5. Vacuum any remaining flour using a furniture attachment.
6. Hang the fur coat on a hanger in the closet for a day.
7. Comb the product, removing any remaining flour.

Hydrogen peroxide

For items where dirt is most visible, you can use a delicate cleaning method. This algorithm was created specifically for a white or light fur coat, the material of which is mink or arctic fox.

1. Soak a cotton swab in hydrogen peroxide.
2. Moisten the teeth of a plastic comb with a cotton swab.
3. Comb the item well.
4. Walk a cotton swab soaked in hydrogen peroxide over the entire surface of the product.
5. Allow the product to dry and comb it again.

This method allows you to remove not only dirt, but also the yellowness that appears over time.

Petrol

Cleaning of silver fox products should be carried out in an open space so that the living space is not saturated with the smell of gasoline. It is best to use a coffee grinder to grind bran.

1. Mix crushed oat or rye bran with a small amount of gasoline. Instead of bran, you can use small sawdust.
2. Hang the item on a hanger, and hang the hanger on the crossbar.
3. Using rubber gloved hands, apply the mixture to clothing.
4. Comb the product well and air it for an hour or two until the smell disappears.

Sand

It is best to use this method on fur products with a minimum number of seams, since sand can get stuck in them and is not easy to get out. This method is best for cleaning bedspreads, blankets, fur capes and stoles.

Heat a thick cast iron skillet.

1. Pass river sand through a sieve and pour into a frying pan.
2. Heat the sand until hot, but so that the temperature is tolerable for the hands.
3. Spread the item on a flat, flat surface and sprinkle it evenly with sand.
4. Gently rub the sand into the pile, removing dirt.

Color protection

To clean sheepskin, you can use a delicate method, which will take some time, but the product will definitely not deteriorate or lose its original color. This method is also very good for rabbit items.

1. Take a special comb with rounded teeth for cleaning fur.
2. On each clove, wrap a piece of cotton wool soaked in alcohol or kerosene or in a warm soap solution.
3. Secure the cotton pieces with a cotton thread at each clove.
4. Comb the fur along the hairline.
5. Hang the product outside or on the balcony until the characteristic unpleasant odors disappear.

Fur detergents

In addition to special chemicals, you can use various folk compositions. They can wash both faux and natural fur. The list of the most effective includes:

• flour;
• sawdust;
• starch;
• bran.

The selected ingredient must be poured into a basin or other deep container. Then the item is carefully “rinsed” and shaken out.

How to bleach natural and faux fur?

White collars look especially charming. They highlight the beauty of the face, but get dirty very quickly. In addition, white fur tends to turn yellow over time if not stored correctly.

You can try to bleach the pile using folk remedies:

• Hydrogen peroxide. To restore whiteness to the fur edge and get rid of the unsightly yellow tint, you need to dilute a tablespoon of 5% hydrogen peroxide in a glass of water, add 5 drops of ammonia and mix everything. Then you should soak a foam sponge in the solution and treat the yellowed areas. After 5-10 minutes the shade will change, then the collar can be wiped dry with a clean cloth.
• Blue. The product has long been used to color white items that have yellowed over time. To do this, blue is dissolved in water to obtain a light blue tint (5-7 drops per 200 ml). The collar is irrigated with a spray bottle or treated pointwise with a sponge. The blue pigment “eats” the yellowness, and as a result the fur becomes snow-white.

Recipes with peroxide are suitable for natural all-white fur, and for silver fox fur, and for artificial fur. But in the latter case, you shouldn’t expect any special changes. Synthetic hair is dyed much worse.

The fur on the collar will remain luxurious for a long time if you care for it properly. Gentle cleaning is carried out up to 2 times per season, usually in the middle of active wear and at the end. If you have doubts about your abilities, you can take the edge to the dry cleaner. But it should be taken into account that natural fur can withstand no more than 6 procedures. At home, using the above methods, the collar can be cleaned safely and more than effectively!

Dry cleaning methods

Before soaking your natural pile fur coat, you should try to refresh it using the following methods:

1. Starch. Pour it onto the contaminated area and leave for 20 minutes. The procedure can be repeated several times. After this, thoroughly shake off the remaining powder. This is a safe way to restore the purity of the Arctic fox's fur and return it to its original appearance.
2. Table salt together with ammonia will remove greasy traces and restore whiteness. To do this, mix 1 tbsp. spoon of salt, 3 tbsp. spoons of ammonia and a glass of water. Moisten the swab in the prepared solution and carefully treat the desired surfaces. After drying, the product will become cleaner.
3. Hydrogen peroxide. If you soak a cotton swab in it and treat the dirty parts of the product, you can restore its whiteness and get rid of small stains.
4. Semolina. Using this ordinary powder, you can slightly refresh a fur product. Pour the powder onto the pile and leave for 30 minutes. After this, carefully shake out the grain from the pile.
5. Mustard powder. It is better to use for darker products. Sprinkle it on fur clothing and leave for 25 minutes. Dry the clothes thoroughly.
6. Cereals. They will help restore clothes made from sable fur. The flakes need to be heated in a frying pan and allowed to cool slightly. Sprinkle hot flakes onto the fur and begin combing.

After dry cleaning, be sure to dry out the clothes well, let them dry and ventilate in the fresh air. Finally, simply brush your clothes with a soft brush.

Thus, washing natural and faux fur at home is a risky business. If the item is really expensive, then it is better to entrust it to professionals and go to dry cleaning. If you dare to clean your wardrobe items yourself, strictly follow the recommendations and choose the most gentle methods.

We will not say that the easiest way is to clean a fur collar in a special salon, since this pleasure is not cheap, but we will give recommendations on how to wash a fur collar at home, carefully and effectively clean the fur at home. Let's share our secrets and tell you what it is like to wash fur at home, depending on the type of fur collar and color.

If we clean a down jacket with fur, the cleaning varies depending on what color it is, natural or artificial.

If we are talking about natural fur, then it not only decorates the product, but also retains heat. The advantage of artificial is the price, and the appearance is no worse.

Natural fur

There comes a time when the fur gets dirty and its appearance deteriorates; you can simply wash it or make the operation more difficult. Don't be upset, because there are many ways to eliminate pollution. If the product or collar is too damaged by dirt and you can’t remove it on your own, you can contact a dry cleaning service and for the specified price they will quickly and accurately eliminate the defect, and then you won’t have to wash the fur from the down jacket.

Unlike artificial fur, it is prohibited to wash a jacket with natural fur in a machine.

The very first step

We are trying to resort to dry washing. To do this, carefully shake off the dust from the natural fur, take a vacuum cleaner with a brush attachment, and then remove the surface dirt again.

If after combing there is still dirt, we proceed to a stronger method. Although toys or fur from the hood most often become clean after such manipulations.

Wet cleaning

Take a suede shoe brush and room temperature water.

Wet the brush and wash it well, and then clean the collar and fur trim; the fur trap also undergoes the same cleaning. Repeat 2-3 times. After this, comb gently and leave to dry.

Wash in water

If none of the above methods turned out to be useful, move on to a more risky method, wet washing. Since in dry cleaning such actions are performed using special equipment, we take more risks.

Before washing, check to see if the powder will cause it to creep. To do this, drop the product onto a small, inconspicuous area. Or a more aggressive method - check with a drop of ammonia.

The safest would be a product for bathing animals or caring for fur or wool. It’s excellent and, most importantly, it will carefully remove excess fat.

Fur products do not tolerate hot water, avoid high temperatures manually, and it is better to wash a fur collar in a washing machine only at low temperatures.

Petrol

Treat greasy and greasy areas with purified gasoline. If the collar has not been cleaned for a long time, this method will save it.

Gasoline is an excellent degreaser, but it smells unpleasant. After such cleaning, the edge will need to be washed by hand or in a washing machine using a powder or gel product.

A sponge is soaked in gasoline and the greasy areas are wiped. It is necessary to wipe a product with a short pile against the pile, and with a long one - along it.

Refined gasoline should be used away from open flames.

You can also use the following remedy: 2 tbsp. l. starch flour is mixed with 200 ml of gasoline. The mixture is applied to the edge with a foam sponge in a thick layer.

After 30 minutes, shake the collar to remove any remaining flour. Then heat the potato starch in a frying pan, pass through a sieve (to remove large lumps) and wipe the fur with it.

This product will remove any remaining gasoline mixture. After such cleaning, you need to take the product out onto the balcony so that the smell disappears.

Washing the edge

If the fur on the jacket is removable, this makes it much easier to wash. Before washing the fur from the down jacket, you must, of course, unfasten it. If you need to wash permanent fur at home, you will have to be clever so as not to get the entire jacket wet. Products with permanent fur are laid out on the table to make it easier to clean the edge.

If the collar is artificial, then it can be easily machine washed. The temperature for such things should be about +30, the washing mode should be selected delicate. The products are dried in a horizontal position, and after drying they are combed. It is much more difficult to wash natural fur.

It is strictly forbidden to wash natural fur products in water, as this will inevitably lead to shrinkage of the product and even to its damage. Only dry cleaning or dry cleaning are two possible options for washing natural fur.

Soap solution

If it is not recommended to completely soak the product in water, it can be cleaned with a damp cloth or sponge soaked in a soap solution. Prepare a soap solution based on regular shampoo or baby soap. The pile is wiped with a rag in the direction of growth, being careful not to wet the skin so that it does not wrinkle.

After you clean the product with soapy water, wipe it dry with a dry towel and leave it in a horizontal position for final drying. While the edge dries, you need to shake it vigorously several times and then comb it with a special brush. When combing, do not sharply tug the villi. Comb such things only in the direction of growth of the pile.

Starch and gasoline

A great way to wash the fur from a down jacket dry is to treat it with starch and gasoline. These two products perfectly collect dust and dirt, and even remove stains.

For such purposes, you need to take special household gasoline, as it is well purified. Car gasoline will not work for cleaning the edge. Mix potato starch and gasoline to make a paste. The mixture is applied to the most contaminated areas of the collar and left for 30 minutes. Then the product is cleaned with a brush and the remaining cleaning agent is shaken off. Usually the erased edge becomes much cleaner after the first procedure.

Talc

Talc is a proven way for many housewives to wash fur at home. Take a handful of powder and begin to rub it into the pile in contaminated areas. The procedure is carried out until the talc absorbs all the dirt. Then the powder is simply shaken off, and the fur can be vacuumed.

An excellent alternative to talc if you don't have it on hand is potato starch and semolina.

Peroxide

Very often, collars, especially light ones, begin to turn yellow. Peroxide will help to cope with the yellowness that appears due to prolonged wearing. To prepare the working solution, 1 tsp. peroxides are diluted in 200 ml of warm water.

Then moisten a sponge or flannel in the solution and begin to clean the edge according to the growth of villi. Experienced housewives advise adding 5 drops of ammonia to the solution to add shine to the collar and further whiten it.

Cereals

How to clean natural lint if it is very long? Simple oatmeal, which is found in every home, will help. To do this, heat a handful of oatmeal in a dry frying pan and scatter it over the surface of the collar. The pile must be wiped well with warm flakes so that they absorb all the dirt. Finally, the fur is shaken out. You can also vacuum the collar and then hang it out in the air.

Glycerol

Glycerin is an excellent product for caring for natural fur. Glycerin perfectly collects all the dirt and at the same time gives shine to the pile. It is necessary to moisten a cotton pad in pure glycerin, and then wipe the pile with it as it grows. After this, the item is combed well and hung out to dry in the shade in the air. Be sure to listen to the advice of experienced housewives. For example, many people advise that if the pile has lost its shine, wipe it with a vinegar solution and then dry it in the shade.

You can use natural apple cider vinegar slightly diluted with water for cleaning. You can’t dry natural products in the sun or overly moisturize them, so as not to spoil the interior. Only white fur after bleaching can be dried in the sun.

Washing the fur of the removable collar

Often, fur collars on jackets can be easily and quickly removed for easy washing, so before you wash your fur collar at home, check to see if it can be removed. If there is such an opportunity, do this so that the jacket does not interfere with you during the process of cleaning the fur. Also, do not forget to look at the label before washing the down jacket collar - this is necessary in order to find out whether the fur is real or artificial. How to wash fur from a down jacket will depend on this. So, faux fur is washed in this way:

1. Remove the fur collar from the jacket and place it in the washing machine drum.
2. Set the washing mode to delicate, set the temperature regulator to 40 degrees.
3. Pour the required amount of washing powder or gel into the machine compartment.
4. Wait until the wash is finished, place the collar horizontally and dry.

Is it possible to wash fur from a down jacket by hand? Yes, only in the process of such washing you need to ensure that the water is at a comfortable temperature for the fur, and that the actions themselves are delicate.

Washing natural fur

Many people wonder whether it is possible to wash a collar made of natural fur in water. This is strictly prohibited, as water will ruin the fur and lead to deformation of the item. If you're wondering how to wash a real fur collar, check out dry wash methods. The best way to wash a collar made of natural fur is to take it to a dry cleaner, where experienced workers know exactly how to handle fur products. If it is not possible to go to dry cleaning, resort to the following folk recipes:

• Get some potato starch before washing your collar fur. Sprinkle a little starch on the product, then spray a solution of shampoo in water onto its surface. Do not wet the fur too much to avoid spoiling it! Once the starch has formed into a dough, brush it off with a brush.
• How to wash white fur from a down jacket? Use hydrogen peroxide - soak a cotton swab in it and wipe the surface of the fur with it in the direction of the pile. Walk over the product several times to completely clean the fur of black dirt and dust.
• Heat a small amount of fine sand in the oven, then pour it onto the surface of the natural fur, then remove it. If the result does not appear the first time, repeat the procedure until the fur is completely clean.

These are the most effective and popularly proven ways to wash fur from a down jacket at home, if the pile is of a natural nature. Use only dry methods for washing natural fur, and do not resort to using water - this will only make things worse!

Some nuances to consider

As a rule, the manufacturer provides for washing their clothes, so most often in modern models the fur collar is removable. That is, before washing, it can be easily unfastened from the hood. But there are also items in which the collar trim or sleeve trim is built into the product. Most often it is faux fur. In fact, unlike natural fabric, it can be easily washed, both by hand and in a washing machine. But before you do this, you need to understand some nuances.

Tip: If your jacket has removable fur, it's best not to wash it. Small stains can be cleaned using dry cleaning. If it comes loose but you still want to machine wash it, place it in a mesh laundry bag.

IMPORTANT! The information on the label or tag is extremely important. If you do not follow these instructions, you can easily damage your item.

• Before washing, check the fur for strength. If it is poorly attached to the product or is falling out and fraying, it is better to wash such clothes by hand or dry clean them.
• You should not wash any other things together with the jacket (down jacket). Fur lint will definitely stick to other things, after which they will need serious cleaning.
• Items with built-in faux fur should not be washed frequently, especially in a washing machine. Small stains can be easily cleaned and washed away using the necessary detergent and a sponge.
• Before washing, it would be a good idea to comb the fur on the jacket with a soft, long-bristled brush. This way you will remove excess lint that falls out, distribute the structure of the fur, which will prevent it from sticking together and bunching up much during the washing process.
• It is not recommended to use regular washing powders to wash items with faux fur. They are quite aggressive, and they are difficult to rinse out of bulky items. Use special liquid products, gels or capsules. In extreme cases, you can use regular shampoo or dishwashing liquid.
• As a rule, the machine is set to delicate mode with a temperature not exceeding 35 - 40°C. It is better not to use spin at high speeds and the “Drying” program.

IMPORTANT! Some things, especially those bought at the market, may be of dubious quality. Often faux fur can be brightly colored

Before washing, you need to check how well the paint is fixed on it. Take a white cloth and soak it in either hot soapy water or an alcohol solution (1 part water, 1 part alcohol). Rub the fur with it and see if the paint has imprinted on the napkin. If there is such a problem, it means that the fur will fade when washed and it is better to wash such clothes by hand.

We wash the fur on the non-removable collar

How to wash a down jacket with fur if the collar cannot be separated from the clothes? In this case, everything is a little more complicated, however, washing is possible. The decision depends on the type of product with fur:

• Down jacket. You can take your down jacket to the dry cleaner if you are afraid for the fate of your clothes. How can you wash fur from a down jacket at home? Place it in the washing machine, setting it to the delicate cycle first. To prevent the fluff from caking during washing, add several large tennis balls to the drum, which will prevent the clothes from deteriorating.
• Parka. How to wash a fur collar on a parka? This can be done with the jacket itself, either in the washing machine or by hand. Before doing this, you need to look at the label on the clothing to find out what mode and temperature should be set.
• Leather Jacket. Is it possible to wash a fur collar together with a leather jacket? You can’t - for this you will have to use only the manual method, while preventing drops of water from getting on the leather surface. The best option is to take the product to dry cleaning.

If you have just purchased a jacket or down jacket, and the fur on the hood looks new, it would be a good idea to take preventative measures to prevent the risk of contamination. Thanks to a simple procedure, the fur will last you much longer and retain its presentable appearance. First you need to unfasten the fur from the hood, if possible, and spread it on a hard surface, for example on a table.

After this, you should moisten a cotton pad with alcohol and wipe the edge of the hood lengthwise and crosswise with quick, vigorous movements. If necessary, you can repeat this procedure one more time. Then you need to let the product dry. After the fur has dried, you need to comb it with a comb or a brush with hard bristles. After this alcohol treatment, the fur will become shiny, fluffy and will retain its original freshness longer.

How not to wash

You can follow the washing rules and change some details, but here’s what you absolutely cannot do with faux fur:

• heat, because at high temperatures artificial fibers are subject to deformation;
• washed fur should never be dried in a machine or dryer, this will most likely irrevocably damage the texture of the material;
• use bleaches, stain removers and other detergents that attack fibers aggressively.

White faux fur should be washed especially carefully. Not only can it turn yellow due to the wrong detergents, but also the deformation of the fibers can turn your white blanket or fur coat into something sloppy

These simple tips will show you how to wash faux fur and deal with stains at home. But the main thing to remember is that cleaning is not necessary if you take care of things on time and regularly.

Faux fur looks very stylish, has a long service life and can decorate many products. You just need to take care of it with special care. Today I propose to figure out whether it is possible to wash faux fur in a washing machine and how to wash it by hand.

Before I tell you how to wash faux fur at home, I would like to mention a few words about this material. It has earned its popularity due to its durability, light weight, relatively low cost and lack of problems with moths.

Not sure what faux fur is made of? This is a fabric made of leatherette or knitwear, to which a pile of chemical fibers is attached. The pile itself can be:

• smooth-haired;
• imitating natural coating.

In order not to damage the fur product during the cleaning process, you must adhere to the following rules:

Photo

Recommendations

Tip 1

No high temperatures

It doesn’t matter whether you decide to wash your fur coat in a washing machine or wash the lint blanket yourself, the water temperature should not be too high. When heated, the fabric lining begins to soften and deform. Even if hot water does not harm it, there is a high risk that the pile will lose its shine.

Tip 2

Gentle drying

Once the faux fur wash is behind you, it needs to be dried properly. It is best to hang the fur coat on hangers and hang it in a place where there is no direct sunlight.

Tip 3. Additional processing

Due to the fact that artificial hair has no direction of hair growth, it requires special care. After washing, you need to smooth the material with your palms, and after it dries, gently comb it with a soft brush.

Is fur afraid of water?

First you need to figure out what kind of material you have to deal with. Faux fur products withstand various deformations, tests, and washing. Therefore, they can be washed in any convenient way. The most important thing is not to overdo it with the water temperature. Otherwise, there is a risk that the fibers will become deformed and lose their smoothness and shine.

To properly wash natural fur at home, you need to thoroughly prepare. Such items of clothing are easily damaged beyond repair. This is due to some production features:

1. When preparing the fabric for sewing fur clothing, the animal's natural lubricant is partially washed away, which prevents them from getting wet. Thanks to this lubricant, the animal does not get wet for a long time in the rain. The main task of the manufacturer is to preserve this natural segment as much as possible. The more careful production is, the more complex the equipment will be required and the more expensive the cost of clothing will be.
2. Tension of the pile base. The skin under the fur is stretched with special force. This is done in saving trees to use less material to produce more products. Weakened skin under the influence of moisture after drying is easily deformed and loses its appearance.

Thus, in order to clean a fur product made from natural linen and not spoil it, you should approach the procedure with maximum responsibility.

How to wash in a washing machine

If there are no prohibiting marks on the label, it is permissible to wash a white down jacket (with natural or artificial filling) in the washing machine. For this:

1. Place the jacket in the drum, distribute it evenly around the inside.
2. Pour in detergent.
3. Select a delicate mode: “hand wash”, “down”, “wool”, etc. If the jacket has synthetic filling, you can additionally install a pre-soak function.
4. Activate the extra rinse function.
5. Set the spin speed to 600–800 rpm. High speed will lead to the fluff rolling off, the filler will begin to break through the seams and fabric.
6. For better rinsing of detergent, maintaining the shape and lightness of the filler, place 3-4 laundry balls in the machine drum.
7. Start the cycle.
8. After the end of the cycle, evaluate the quality of the wash: squeeze the sleeve in your fist. If foam appears, rinse the jacket again. To do this, you can run any short washing cycle (20–30 minutes) at 30 degrees without detergent. Rinsing in warm water better removes powder residue and prevents streaks from appearing on white fabric.
9. Place the down jacket to dry.

If the machine has the ability to additionally set the temperature, limit the water heating to 30 degrees; if not, just select one of the modes listed in the instructions above.

If, as a result of active wear, a white down jacket has acquired a gray tint, it is permissible to use oxygen or optical brighteners when washing in a machine, but without detergent.

Using the washing machine

Those housewives who had to face the question of whether it is possible to wash natural fur and its artificial analogue need to know that machine washing of such items is permissible only if the household appliance supports a delicate mode, that is, the entire process takes place at a low number of drum revolutions and low temperature.
It would be great if the washing machine also has vertical loading. To do laundry, you need to purchase a mild detergent; fortunately, there are a lot of such products available now. You cannot wash other items at the same time as synthetic fur items, even those made of the exact same material.

Procedure for machine washing:

1. The item is placed in the washing machine tub. If it has vertical loading, it is first filled with water 50% and not turned on. Front loading models include a soak option.
2. After 10-15 minutes, the household appliance is switched to delicate washing mode. Soaking things for more than half an hour risks the fact that the chemicals in the detergents will begin to destroy the synthetic material.
3. Some washing machines have a gentle spin mode - this is exactly what is needed in this case. But if there is no such function, you will have to manually remove excess moisture from the item so that the drum does not fray the lint. The main thing is not to overdo it, squeezing the thing with your palms.
4. After finishing washing, hang the item in the bathroom and wait until the water drains from it. After this, you can hang it on the balcony, protecting it from direct sunlight, which can damage the fabric.
5. The final touch should be combing the pile. A soft, wide-toothed brush will do. Comb the faux fur carefully, without making sudden movements.

Hand washing and gentle machine washing can remove dust, light stains and refresh the appearance of your synthetic fur product. But whether it is possible to wash factory-made fur, namely to remove stubborn stains from it, is not entirely clear.

Experts are in a hurry to rejoice - and this is possible, but, of course, no one can give guarantees that the thing will regain its previous appearance.

To remove old stains from synthetic fur items, you can use the following recommendations:

1. If you need to clean a collar or cuff that has become very greasy from contact with the skin, you should mix a tablespoon of gasoline or alcohol with a small amount of potato starch, and then apply the resulting slurry to the greasy stains, wait 15 minutes, and then remove with a damp sponge.
2. There is nothing difficult about washing a hood made of such fur. The simplest solution is to buy a special stain remover for synthetic materials. If this does not help, then the pile is treated with a cleaning agent in the form of an aerosol or foam. Taken together, these measures will allow you to clean the fur as much as possible.
3. Things are more complicated when you need to wash the faux fur from a down jacket. It is impossible to wash a synthetic lining without a down jacket if it is not detachable. Then dry clean with a brush and surface stain remover. Cleaning with a cotton swab dipped in an alcohol-containing solution gives good results.
4. You can restore the previous color of white fur by trying to apply lemon juice diluted with water on it, but it will be extremely difficult to return the former whiteness in this way.

By adhering to basic rules and practical tips, you can perfectly wash faux fur without even taking your favorite item to the dry cleaner.

Attention, TODAY only!

Fur products are not only warm, but also very beautiful. Such items in the wardrobe are usually in demand for more than one season and never go out of fashion. But over time, the fur gets dirty, spots appear on it, dust settles and the color may even change. Then the question arises of how to wash fur and products made from it correctly and safely in order to return things to their original appearance. In this case, you should follow some rules and try to be as careful as possible throughout the entire process.

General recommendations

Before washing the collar of a down jacket, it is necessary to prepare the product; just because of one fur, you should not wash the entire thing.

Preparatory work is carried out as follows:

Depending on the quality of the fur, further cleaning is carried out in different ways. Is it possible to wash fur from a down jacket in a machine? How to wash a fur collar? We will look for answers to these questions further.

We invite you to familiarize yourself with a stain from a ballpoint pen on white clothes.

Effective ways to clean faux fur

Like all clothes, fur gets dirty and worn out. This problem is relevant for light-colored products. Dry cleaning is not affordable for everyone; the housewife is faced with the question of how to put the edge in order on her own.

On the collar

If a jacket, sheepskin coat, down jacket or coat has a hood or collar with synthetic pile, they will soon become covered with a greasy sheen. These parts of clothing are especially vulnerable to contamination and often come into contact with hair and skin. Oily traces are left by foundation and skincare products. Cleaning is a problematic issue, but solvable.

The artificial collar effectively recovers from the effects of:

• acetone;
• a mixture of alcohol, pure water and salt (1:50:3).

The substances are applied to the product with a soft sponge, the excess is removed with a clean cloth, then the fur is knocked out.

For severe stains, wheat bran will help. The product should be heated on the stove, stirring constantly. The thing is laid out on a horizontal surface, and bran is laid out on top. It is necessary to wipe in the direction of the pile and against it. At the end of cleaning, knock out the collar.

To clean white or cream faux fur on a down jacket or jacket, you need to prepare the following solution: combine lemon juice or acid with water in equal proportions. Moisten a sponge in the prepared liquid and clean the pile. After the procedure, clothes should be hung to dry. Comb the dry edge with a wide-toothed comb.

Citric acid can change the shade of fur! Test on an inconspicuous area and ensure that no yellowing appears.

On shoes

Fur on shoes quickly collects dirt from roads. Baking soda will help clean it. This is a simple, effective remedy against stains and yellowing. It is enough to rub the soda into the pile with your hands until the substance turns gray.

If there is no soda, boots or boots can be cleaned with potato starch, wheat flour or talcum powder.

On other clothes

An artificial hat, scarf, vest are subject to rubbing. Cleaning with soda, solutions of alcohol, salt, and water will help restore them to a fresh look.

You can use a brush. For this:

1. Prepare a soap solution: warm water 1 liter, washing powder 1.5 tsp. Dissolve the granules, whip up the foam.
2. Lay the item on a horizontal surface so that access to the fur is open.
3. Dip the brush into the foam, brush the fur with it strictly in the direction of the pile.
4. Use a damp cloth to remove excess soap.
5. Wipe the surface with a dry cloth.

For complex dirt or greasy stains, first wipe with gasoline and ventilate in fresh air.

How to carefully wash the fur from your down jacket?

Fur fringe is an inseparable part and attribute of winter outerwear, because if it is present, it becomes warmer and more beautiful. But then a logical question arises, how to wash the fur collar of a winter jacket, and the answer is “silence,” since some may have certain difficulties. Don’t despair, there are absolutely wonderful ways to carefully wash and return natural or faux fur to its original appearance. By the way, we just recently learned how to wash a down jacket

.

What technology is used when washing fur?

Usually the fur collar of a down jacket is detachable, as it is secured with rivets or buttons. Due to this, the fur needs to be cleaned separately from the jacket, this will make it possible to keep it safe and sound

This is so important because real fur should not be washed with water and especially in a washing machine. Since, for fur, you can only use dry cleaning

Precautionary measures

If the chosen cleaning product is toxic, protect the skin of your hands, eyes, and respiratory organs from their negative effects using personal protective equipment. Work with windows open.

Even if you choose a simple and recommended cleaning product, be sure to test it on a small, inconspicuous area of ​​the fur item before you begin a full-scale treatment.

Dry your faux fur coat after water cleaning and washing in a well-ventilated area.

When cleaning with gasoline or kerosene, beware of open flame.

That's all we wanted to tell you about cleaning faux fur. We hope that the publication was useful to you.