Keyboard cleaning slime from AliExpress cleans the keyboard and other hard-to-reach places from all types of dirt.
Thanks to its gel structure and plasticity, it penetrates deep between the keys.
Disinfects and adds shine.
When cleaning, we often find ourselves unable to clean some areas with a regular rag or need to clean a surface that cannot be wetted with water. In such a situation, a Chinese keyboard slime will come in handy. This is a gel-like substance that easily penetrates into the smallest cracks, recesses, pores and, due to its stickiness, removes dirt particles from any nook and cranny.
What is slime
It is a gel-like substance with a specific but quickly dissipating odor. The advantage of keyboard cleaning slime is that it can get into any crevices. Thanks to this, it selects small particles from there: everything from crumbs with hair to dust.
The slime features are as follows:
- it has softness and sufficient moisture;
- ideally adheres to any surface;
- spreads out over the smallest cracks and immediately after that gathers into one common mass.
Due to this, keyboard slime ideally removes debris and dirt. It literally dissolves absorbed dust and other small contaminants. This will keep your hands clean and your keyboard or any other surface clean. You can stock up on a disinfectant variety if the device is used by several people at once.
Expert opinion
Svetlana
Slime expert
It is worth noting that after such cleaning the surface acquires dust-repellent characteristics. That is, any specks and dust particles will stick in a smaller volume.
Vacuum cleaner or compressor
If there is no compressed air cylinder, replace it with a vacuum cleaner or compressor, or, in extreme cases, a hairdryer.
- It is better to put a crevice nozzle on the vacuum cleaner and work in air blowing mode. Finally, you can switch to suction mode. Be careful, the strong air pressure will rip out the keys. There are special mini-USB vacuum cleaners for cleaning your computer and keyboard, but they are ineffective.
- A nozzle for inflating the ball is put on the compressor. Always check that dirt does not fly out of the compressor with the air.
When blowing, hold the keyboard at an angle of 75° to the surface, as in the previous method.
How to clean your keyboard
To do this, make sure that you have purchased a special slime. It should contain alcohol (in a minimal amount), distilled water and other natural ingredients. Next, remove it from the package, but first prepare the keyboard.
There should be no large or sticky areas of dirt. It is recommended to wipe them with an alcohol wipe first. If you have not cleaned your keyboard with slime before, read the instructions on the package. Depending on the specific variety, the nuances may vary.
Algorithm for external cleaning of a laptop keyboard
Using special tools
In fact, the procedure is simple and does not require much time:
- The device is disconnected from the power supply. This is done by simply unplugging the plug from the socket. You should not neglect the moment in order to reduce even the slightest risk of electric shock.
- Disable all laptop workflows. Simply put, they finish the job and wait until the light on the device’s power button goes out.
- Prepare all necessary tools, materials and liquids. Most often they use a soft brush with short bristles, cotton swabs and dry microfiber cloths. Paper napkins are useless in this case; they leave more dust than they collect.
- Use a brush to sweep away debris from the spaces between the buttons. Instead of a special brush, a regular toothbrush is suitable for cleaning your teeth.
- Wipe the keys. This is done with a cotton swab slightly moistened with alcohol or soap. First, the surface of the buttons is treated, then the spaces between them.
- Wipe the entire surface dry. Carefully inspect the keyboard for contamination and, if necessary, repeat the procedure.
If possible, during the cleaning process, place the keyboard perpendicular to the surface of the table. This will help remove debris - crumbs will fall onto the table and not onto adjacent keys.
After finishing the manipulations, give the laptop half an hour for additional drying, then put the device into operation.
Slime for car cleaning
Cleaning the keyboard is not the only task that the slime can handle. Some of them are also used for cleaning various surfaces in cars.
More often they are used to remove dust or small debris from joints and other surfaces, the dashboard. To do this, you just need to apply the slime to them, wait until it drains and then place it on another area.
It is recommended to carry out such cleaning once every one and a half to two weeks or as it gets dirty. It is better not to do this too often and, during breaks, wipe the surfaces in the car with an alcohol solution or special wipes.
Expert opinion
Svetlana
Slime expert
Please note that the slime should only be used to clean the inside of the car. Its use outside will be much less effective: stains and colored areas may remain on the matte surface.
Types of laptop keyboard cleaning and their differences
Wiping
Experts distinguish between two types of cleaning:
- Easy. This is the superficial removal of dust, dirt from the keys and the space between them. This cleaning is done several times a day, simply wiping the buttons with a dry cloth.
- Deep. Thorough cleaning involves a thorough procedure using various devices and products. In some cases, the keyboard is disassembled and the contacts are cleaned.
The more often and better light cleaning is done, the lower the risk of accumulation of “dirt deposits” and their negative impact on the operation of the laptop. Moreover, some laptop models do not allow you to remove the buttons without disassembling the entire device.
Where to buy, how much it costs
Usually, users order the required type of slime on the website of one of the Chinese online stores. It could be:
- Pandao;
- Jum;
- AliExpress.
However, you can also purchase them in regular physical stores. For example, in Fix Price, Magnit and other large retail chains. The cost is about 100 rubles. The price may vary depending on the composition, color and area of the slime.
The most expensive option is the Cyber Clean super-cleaner. It is billed as an all-purpose slime that is good for cleaning keyboards, cars, and other surfaces. It can be ordered on the official website. The price is from 200 rubles. for 80
Deep cleaning with disassembling the laptop keyboard
Removing the keyboard
Thorough cleaning is carried out at least once every 3-5 months. Regularity depends on the intensity and conditions of use of the device. The operating algorithm is simple:
- the laptop is turned off;
- the keyboard is disassembled;
- use a screwdriver to remove the keys;
- clean the buttons using any available method;
- wipe contacts;
- dry all elements;
- assembling the keyboard.
If the first deep cleaning is to be done, the keyboard is photographed before disassembling. This will help you avoid confusing the button locations.
Rules for removing and installing laptop keyboard buttons
Removing buttons
Removing buttons is recommended only for experienced users. If you have doubts about your own skills, it is better to take your laptop to a service center for cleaning. Specialists charge inexpensively for the work, but do it quickly and competently.
Here's how to remove and install the buttons yourself:
- Disconnect the laptop from the network. Turn off the device.
- They find a sharp knife or plastic card at home. You can take any object with a sharp and thin end.
- Carefully pick up the key from one corner, move the blade to the other corner, then to the third and fourth. You will hear a characteristic click – this is the sound of the button being disconnected.
- Remove the key. Do this very carefully so as not to break the lid and clips.
Not all laptop models allow you to remove the keyboard buttons. In some devices, the caps remain connected to the platform at one angle. You can't tear them off! This will cause the laptop to stop working.
After the buttons are removed or “half-removed,” the space under them is cleaned with a cotton swab or napkin (toothpick). And then install the keys in place. If not the entire keyboard is stuck, but only a few buttons, it is enough to disconnect them.
Question to the expert
What should you do if the key cover or clip is broken? Is there any way to replace it?
Yes. But they do this only at the service center. To deal with the problem yourself, they find an identical laptop, remove the key that turns out to be damaged, and install it in the right place.
How to use
To fully clean the keyboard, it is important to follow a number of rules. Necessary:
- Carefully remove the slime from the packaging. Then spread it over the surface of a small area of the keyboard. It is important that it completely captures all the buttons there.
- Press the slime firmly, but with little force. Then slowly peel it off. Thanks to this, you will be able to remove all the dirt and debris that was in the keyboard.
- Turn the slime over and place it on the clean side. Now repeat this operation.
- Rinse the toy. Do this when the slime is completely covered with debris. It is advisable to use cool or warm water for this.
- Roll out the slime in your hands. At the same time, remove all excess moisture, and then, if necessary, carry out the cleaning procedure again.
Please note that the keyboard slime must be clean at all times. Therefore, it needs to be rinsed again after cleaning. To do this, rinse it in warm water and dry it. Be sure to knead it and put it in place.
It is recommended to store this slime only in an airtight container. The lid must close tightly, otherwise the slime will dry out and tear. Afterwards, it will be possible to achieve only partial recovery by placing it in ordinary water.
Have you left a comment?
The dangers of dirty laptop keyboards
Dirty keyboard
The main danger is failure of the device. The problem is complicated by the fact that the keyboard is an integral part of the laptop. And therefore, compliance with standard “computer hygiene” in the form of not eating over the keyboard, not drinking coffee or tea over it, is supplemented by one more rule - timely cleaning.
Even people who meticulously clean their workspace will eventually accumulate dirt on their keyboard. It appears from room dust, small particles of skin, and other foreign particles.
Over time, dirt increases and it interferes with pressing the buttons. If the problem is not resolved, the buttons become stuck and interfere with the normal operation of the device.
A significant amount of debris in the keyboard ends up inside the laptop and damages the radiator.
- The mechanism stops passing air, the laptop overheats and, as a result, breaks down.
- Repairing a failed radiator will cost more than buying a new gadget.
To prevent this from happening, you should know a few simple rules for caring for your keyboard. Regular cleaning will help extend the life of the device.
What to do if liquid is spilled on the keyboard?
If the keyboard was accidentally spilled with tea, coffee, juice or any other liquid, you must proceed according to the following algorithm:
- Immediately disconnect the device from the power supply. Switch off. Take out the battery.
- Disconnect all peripheral devices: mouse, printer, hard drive, camera, headphones.
- Wipe the liquid from the body with a damp soft cloth. The laptop or keyboard must first be turned over so that most of the liquid does not penetrate further into the case and, if possible, flows out.
IMPORTANT! It is better not to turn on a flooded laptop for 1-3 days.
If the laptop has been flooded with water or a small volume of any other liquid, then you can try to save the device yourself: disassemble it according to the instructions into the smallest components possible, rinse and dry thoroughly. Dry computer parts for 24-48 hours in a dry, ventilated area. After 2 days, the laptop can be assembled and its functionality checked.
If the device does not turn on, you should contact a service center.
The same should be done if the keyboard of a laptop or desktop computer was filled with a large amount of liquid containing all kinds of acids: it could be tea, coffee, beer, juice or something else.
After wiping the body with a damp cloth, it is better to leave the device in the hands of professionals. In this case, the chance of saving not only the keyboard, but the entire laptop is much higher than with independent intervention.
Method 3. “General cleaning”
Usually this is the case when it is easier to buy a new keyboard than to bother with the old one. However, if the keyboard is expensive and of high quality, and you don’t mind spending time on caring for it, this method will be very relevant. It is also suitable for cleaning a new keyboard that has had something sticky spilled on it.
So, we disconnect the keyboard from the computer, turn it over and carefully unscrew all the screws that secure the upper part to the lower part. The lower part is easy enough to wipe off dust, but the upper part will have to be tinkered with. Remove all the keys after photographing their location. Wash the keys separately - in a washing machine or in a bag under running water. Then wash the bottom of the keyboard under the tap, using a brush to remove any dirt. Dry everything thoroughly with a blow dryer and put the keyboard back together.
But what if you have a laptop? Use the first method - it is the most secure for the entire device. If we are talking about deep contamination - for example, tea or soda spilled on the keyboard - it is better to seek help from professionals.
Why do you need to clean?
Even the most careful users need to clean their laptop or laptop keyboard from time to time. This is due to the fact that dust particles from the air settle on the surface of the device, the keys are in close contact with the sweat and fatty layer on the fingers, and over time, crumbs and particles of small debris become clogged between the keys.
It is very important to regularly remove traces of foreign substances and debris from the keyboard, otherwise the keys will begin to stick, which leads to malfunction of the matrix and problems with the processor. In the future, this may affect not only the speed and quality of work - over time, a dirty, neglected keyboard will simply fail.
Important! In order for the device to remain operational for as long as possible and meet its original characteristics, it is necessary to take care of the device: carefully monitor cleanliness and regularly perform preventive maintenance.
