How to iron a guy, military and naval uniforms and other secrets of ironing things

Home / Articles / How to iron a guy, military and naval uniforms and other secrets of ironing things

15 Feb 2018

Category: Articles

No comments

Ironing can be a living hell if you don't have the right skills and knowledge.

At first glance, there is nothing complicated about this - put it on the ironing board and move the iron back and forth. Ah, no.

There are many nuances that can make ironing much easier for even the most experienced housewife.

Read in this article:

• Tips for ironing a guy
• How to iron a military uniform?
• Iron on polo shirt collar
• Tips for ironing army caps
• How to iron a school uniform?

How to stroke a penis - advice from experienced housewives

Let's start with a sore spot for many - with collars, namely with the collars that are worn under a sailor suit and are called guises. If you are interested in how to iron a guy, then this is done as follows.

First, iron the front side of the guy. At the same time, carefully ensure that creases do not form on the back side of the fabric - it is extremely difficult to get rid of them later.

Now fold the guy in half with the front side facing inward. Iron first on one side, then on the other.

After the manipulations have been completed, we turn off part of the guy on one side so that this part is approximately a quarter of the total fabric material. We iron the guy in this position. We turn the guy to the other side and bend part of the fabric in the same way, then iron it.

Ready! By the way, folds should be visible on the guy, so you can safely iron the bends. From now on, you know how to stroke your penis correctly and will do it without any problems.

Useful tips

Still don't know how to properly iron men's shirts? In our article you will find the most effective and, importantly, safe ways to iron products. Just study it and you can start working.

Not all clothes can be ironed. Naturally, in this case, you need to know what methods will help you smooth out all the wrinkles on things made of delicate fabrics. Here you will find the most useful tips.

Uniform

Processing military trousers has its own tricks, proven over the years. Here are some of them:

• Lubricate the arrows from the inside with dry laundry soap before processing. This will help secure the fold in perfect condition for the whole day;
• It is better to put a terry towel between the legs when ironing the upper part. This way you will be able to avoid seam marks on the lower parts of the item;
• The acidified solution “holds the fold” well. You need to dilute 1 tbsp in a liter of water. l. vinegar 9%, moisten gauze in this liquid, squeeze and steam the arrows through it.

Be sure to prepare your clothes in the evening, no matter how tired you are. The item must cool down before use, otherwise all the work will go down the drain in the next few hours, and you will have to continue your work day in an extremely unpresentable form.

Features of ironing military uniforms

The question of how to iron a military jacket worries more than one person. Surely there has been more than one dispute between husband and wife about who will do the ironing of such things. If such a fate has fallen on your fragile shoulders, dear ladies, do not despair, we will give you some advice that can help you in this difficult matter.

How to iron a military uniform:

• always follow the instructions on the label (at what temperature to iron);
• if we are talking about ironing a winter-type military uniform made of fabric called bologna, then it should be ironed only from the front side;
• military items made of acrylic should be ironed to a minimum, and to a greater extent due to steam, since high temperatures are detrimental to this material;
• If we are talking about ironing a helmet cover, which is made from a fabric called Greta, then you only need to iron it from the wrong side at a temperature of 60 degrees.

Many people are concerned about how to iron a flanka - a sailor's uniform shirt. There is nothing special in this process; you don’t need to be afraid of ironing just because you haven’t come across such a thing under the iron before. We adapt to the material from which the shirt is made, and get down to business.

If you are interested in how to iron a jacket, then here are slightly different instructions. To iron such a jacket, you must use a steam iron or spray water through gauze and iron it that way. In general, a jacket needs ironing only after serious washing; it is much better to keep it in good condition all the time by brushing. Just apply foam to the jacket and carefully walk over the fabric with a not very hard brush - it will be as good as new, and only superficial ironing will be required.

The question often arises of how to iron a collar on a jacket, because problems often arise with ironing collars in general. It's not that hard to do:

• It is necessary to iron the collar from the wrong side, that is, the one with which the collar is adjacent to the jacket;
• fold back the collar and run the iron over it;
• When ironing, use steam as much as possible;
• When the collar itself is ironed, fold it back and iron the fold.

From now on, you know how to properly iron a collar, and therefore this process will be easier and faster.

Preparing for ironing

You need to start working by studying the labels sewn on the inside of the product. In the case of ironing, we are interested in the icon on the label, which indicates what temperature is recommended for ironing this product. It is usually indicated inside a schematic representation of the iron. The recommended temperature is indicated inside the picture with one, two or three dots. What they mean can be seen in the figure.

If you do not find a label on the product, you will have to determine the type of fabric yourself and take the liberty of choosing the right temperature. The table will help you with this.

Make sure your trousers are clean before ironing. If stains (dust, dirt) are found, they must first be washed and completely dried.

Do not iron dirty or stained items. A hot iron can accelerate the penetration of contaminants into the fibers of the fabric. After this, some stains may be difficult to remove or may not be removed at all.

Learning to iron polo shirt collars

A polo shirt is a great summer outfit. You feel light and comfortable in it; many people play, say, golf or badminton in just such clothes. Difficulties only come when you think: how to iron a polo collar? Overall, this shirt is easy to iron as it has a light cut. However, it should be remembered that polo fabric does not hold its shape well, so you will need starch spray, which can be bought at almost any supermarket.

What to do with the unfortunate collar:

• we read the label and find information about the rules for ironing this fabric;
• turn the polo inside out to avoid color loss;
• spray a little starch on the inside of the collar;
• straighten the collar and iron it once or twice, while pressing the iron quite firmly;
• bend the collar back and iron out the fold.

How to Master the Art of Ironing Army Caps

How to straighten an army cap is a question that hundreds of people ask. We know the answer and agree to share it with you for a certain reward. Just kidding - free of charge, of course!

Many people don’t even understand why iron a cap? But such an action will not be superfluous; after ironing, the cap still looks much more aesthetically pleasing than usual. To iron an army hat, you must use the nose of an ironing board, if available. It's simple:

• we pull the cap over this very nose;
• iron it, treating it generously with steam;
• leave in this position for 15 minutes so that the material cools and the shape is fixed.

If your ironing board does not have the aforementioned nose or such a board is not available at all, no problem. For such purposes, a three-liter jar is often used. Yes, people are very inventive, there’s no arguing with that. You need to put a cap on the jar and steam it. The only disadvantage of this option is that you cannot use steam too much, as non-tempered glass may crack.

And remember that an army cap should not be ironed to terribly perfection, because no one will blow off specks of dust from it every evening and fold it neatly. Therefore, is it worth throwing away nerve cells left and right, trying to stroke a cap that will take on a wrinkled appearance in just a day or two? The answer is obvious.

Interesting to know

To properly iron cotton, silk, wool and other natural fabrics, you need to set the temperature correctly. Remember to use damp gauze. And also read this article, which will definitely help you in the future.

Ironing trousers is an easy process. But only if you know all the secrets of ironing such products. Let's take a closer look at how to properly iron such items - all the tips are described here.

6 more tips

To iron women's or men's trousers with creases quickly and without nerves, follow these six “experienced” tips.

1. Good technique. Use an iron with a Teflon soleplate and a steam function.
2. Procedure. When you need to press creases on double dart pants, start with the darts and work your way down to the creases. When ironing the arrows, move the iron rather than moving it across the fabric. This way you will eliminate the possibility of the device slipping.
3. Special additives. Add a little vinegar or ammonia to a spray bottle of water, from which you wet your trousers when ironing, so the arrows will last longer.
4. Type of water. For ironing, do not use running water, but special water. As a last resort, distilled or boiled.
5. No rush. Iron each pant leg individually. There is no need to stack them on top of each other in the hope of speeding up the process. Do not put the item on immediately after ironing. Leave it on the ironing board or other flat surface. Let the fabric cool for seven to ten minutes. Then hang it on a hanger and put it in the closet.
6. Additional accessories. Are you afraid that the fabric will stick together or slip? Place a lining between the layers. It is more convenient to use cardboard or something similar. Straighten the trousers on the board, insert cardboard into the trouser leg and iron.

Video on the topic

If you value your image or want your man to look like a brand new man, don’t forget how to properly iron your trousers. After a few ironing instructions, you yourself will be giving advice to your friends on how to tidy up the key element of the official wardrobe.

Child goes to school - mother takes care of the iron, or how to iron a school uniform

When choosing what to wear to work, the priority often turns out to be those things that do not need to be ironed. But this won’t work with a school uniform for a child, because you can’t send a child to school in a sweater with the argument “Because you don’t need to iron it!” This means that we need to learn how to iron a school uniform, which is what we will do now.

Absolutely no-frills, but we give you practical tips on how to iron a school uniform:

• be sure to read the inscriptions on the label; it should indicate the temperature conditions suitable for ironing a particular item;
• All mothers recognize ironing a jacket as the most difficult; it must be ironed through a damp cotton cloth so that the jacket does not acquire an unaesthetic shine;
• If after washing the seams on the jacket are wrinkled, apply damp cotton cloth to them and iron them, pulling the fabric from the corner;
• When ironing a skirt, there is one little secret: sweep away the folds with large stitches, this will make ironing much easier, and after ironing the stitches, of course, will need to be removed;
• Untidy bulges often appear on school trousers after washing, which can be eliminated by placing a damp cloth over them and ironing until these bulges disappear;
• When ironing blouses and shirts made of cotton fabric, you need to use a lot of steam.

Yes, everything is not as scary as you thought. Of course, you will have to spend a decent amount of time ironing a school uniform, but if you do it competently, you won’t feel poor and helpless standing in front of a child’s shirt.

Ironing is not at all as difficult as it might seem at the beginning, therefore, if your husband threw you a jacket with the words “Iron it for tomorrow,” you don’t need to panic and think about how to iron your jacket so that your lover is satisfied with everything. We remember that to iron a jacket you need to use steam, re-read the instructions given above and proceed directly to ironing.

Stroking a guy is like crossing the sea, there’s nothing to be afraid of, you just have to fold it correctly a couple of times and iron it – it’s a matter of a few minutes. If you have been entrusted with ironing a military or naval uniform, you should first familiarize yourself with the characteristics of the fabric that you will be ironing, and then begin the process using our tips. Ironing a school uniform is time-consuming, but not difficult, you just need to adapt and learn some secrets.

We also made a very unexpected conclusion - an army cap needs ironing, and nothing more than a three-liter jar can help with this. Arm yourself with an iron and go into battle with things!

How to iron trousers with arrows: preparation

In fact, ironing men's, women's or children's trousers with creases at home is no more difficult than preparing borscht. Of course, it’s a pity that you can’t fix the folds once and for all. But you can bring actions to automaticity and be proud of the result every time. The key to success is proper preparation for the process.

Wash and dry correctly

You need to iron clean clothes. If there is even a small stain, do not take risks, otherwise you will get an ingrained blot. When washing, use the temperature and detergent approved for the specific type of fabric. Don't forget to add conditioner or softener. This will make the matter more pliable. If possible, turn off the spin mode. After washing, hang your trousers so that there are no creases or folds. Straighten them, shake them and iron them with your hands.

Selecting inventory

To properly iron trousers with creases, you will need some equipment. For starters, a good iron. Or equipment that replaces it - a steamer, a steam generator. What else?

• Smooth surface. Ideally, an ironing board, but failing that, a table, floor, and anything else where you can lay out clothes will do. In the second case, the surface needs to be covered with thick fabric (a blanket, a duvet cover in several layers).
• A piece of gauze. Pants are ironed through it to avoid shine and scorching. You can do without gauze. Instead, thin natural fabric (chintz or cotton) is used.
• Spray. A spray bottle is suitable if the iron does not have a steam function.
• Hanger. Perfectly ironed clothes should cool on a hanger. It is better to use special hangers for trousers, or, if not, use the back of a chair.

The operating mode of the iron depends on what fabric the clothes are made from. Typically, information about the permissible “degree” of exposure is indicated on the label. If there is no information, you will have to determine for yourself. Synthetic fabrics can only be ironed at low temperatures, wool, linen and cotton - at high temperatures. Be sure to iron police pants and other pants made of thick fabric while damp.

Iron the whole thing

Peculiarities. It is better to iron trousers slightly dry. Dry fabric is less easy to iron. But if the item was lying in the closet or the moment was missed, you can use a spray bottle or iron it through a damp cloth. At this stage, the arrows are not smoothed, only the remaining parts.

Algorithm of actions

1. Turn the trousers inside out, iron the pockets, waistband and other parts. Turn right side out.
2. Lay your pants out on a flat surface. Iron the front side.
3. When both trouser legs are ironed, place the trousers on the edge of the board and carefully iron them on all sides, moving the waistband.

Now you can move on to the most difficult part: making creases on your trousers with an iron.