How to fluff a pillow if it is crumpled or caked. Flipping pillows made of bamboo, feather, holofiber, swan down and padding polyester

Jackets, pillows. Blankets with padding polyester filling are considered comfortable and practical. After washing, the synthetic winterizer regains its shape, does not become thinner, and does not come out through the seams. At the same time, synthetic winterizer retains heat well, and products with it are cheaper than with down filling. It is believed that synthetic winterizer can be washed even in a washing machine without selecting the delicate cycle.

And this is a mistake, since the material still requires some care, and it may well go astray. Synthetic padding in a jacket significantly worsens its properties. She ceases to be warm and practical. The situation is even worse with a pillow or blanket. Meanwhile, this is not a reason to throw away the item. If stray fluff can be put in order, then padding polyester even more so.

How to fluff a pillow correctly

The process of fluffing a pillow is much like kneading dough. This procedure is quite simple:

To fluff a pillow, you need to beat the filler with both hands closer to the center (this can be done with both your palms and your fists) and immediately knead it, smoothing out all the cakes and lumps. Carefully walk around the entire perimeter of the product to evenly distribute the filler and give it its original shape. If necessary, turn the pillow over and repeat the procedure.

However, it is worth considering that there are many filler options on sale, some of which have their own nuances.

Made from holofiber

If the holofiber balls stick together during prolonged use, then the following measures should be taken:

Remove the filling from the pillowcase. As a rule, most modern products have a hole with a zipper, which makes removal easier. If there is no such hole, then the bedstead will have to be ripped apart.
Prepare two brushes, the first of which is a regular massage brush, and the other is a special comb that is used to comb the thick hair of pets.
Distribute the tangled holofiber on a massage brush and carefully comb it with a comb, removing lumps.

Made from bamboo

Despite the menacing name, this material is more reminiscent of cotton wool or padding polyester, and the pillows themselves are soft, light and voluminous.

However, bamboo has disadvantages, namely rapid creasing and sensitivity to moisture. During use, the fibers become knotted, become heavier, and the pillow loses its shape. If a bamboo pillow is caked, this can easily be corrected by regularly beating the filler, after which the fibers will become voluminous and elastic again.

Made from swan's down

Nowadays, artificial swan down is made, since the use of natural down is impractical and uneconomical. This material is very light and airy and resists compaction well. Usually, with constant use, a pillow made from such a filler does not lose its shape or clump, but it is still recommended to periodically fluff it with your hands before going to bed.

From padding polyester

It is quite difficult to beat compacted padding polyester, as it becomes very flat and hard, and is difficult to return to its original shape. You can try to pull out the filler and fluff it, expanding it with your hands, paying attention especially to the caked parts.

Making a pillow on padding polyester

What you will need:

dense fabric for the cover - chintz or calico;
sheet synthetic filler;
zipper;
scissors, thick thread, needle;
felt-tip pen, ruler;
sewing machine.

Manufacturing process:

Cut padding polyester for pillows into squares of 43, 38, 33, 28, 23 cm. Two squares of each size. Each of them is 2.5 cm smaller than the previous one on one side. The value varies from 1.5 to 4 cm, this affects the volume of the pillow.
Fold two identical pyramids of squares. Then turn one over to the other: the small squares are connected to each other, you get an inverted pyramid on a regular one.
Hand sew the edges of large layers. The rest should be evenly distributed inside.
How to properly stuff a pillow with synthetic padding: measure the filler blank and cut out a rectangular cover from it. Leave seam allowances of 1.5-2 cm.
Sew the cover separately. If you have certain skills, sew piping into the stitching along all edges of the cover. It will make the shape clearer and retain it after washing.
Turn the cover inside out and put it on the padding polyester blank. Sew up completely using a sewing machine. Another option is to make a zipper on the cover so that you can wash it separately and refill it when the filling becomes old.

When making a pillowcase, add a couple of cm allowances to make it comfortable to put on. It is advisable to make a pillowcase with a zipper, it is convenient and the pillow does not fit out.

How can you replace padding polyester for a pillow:

Holofiber - polyester balls twisted in a spiral, hollow inside. Lighter than padding polyester, warms better due to the large space for air. Siliconized coating is present.
Sintepuh - similar in properties to holofiber. It is made by combing polyester fibers. They are also treated with silicone and twisted into spirals. In appearance and properties it is similar to the natural down of waterfowl.
Ecofiber is an environmentally friendly material similar to natural down. Its thin fibers can simultaneously contain seven hollow channels. It differs from synthetic fluff in its completely environmentally friendly production.
Comforel - small fluffy balls, up to 6-7 mm. Empty inside. Cheaper than holofiber, will last less.

How much synthetic fluff do you need for a pillow:

0.5 kg per 50x50 cm;
0.55 kg for 50x60 cm;
0.6 kg for 60x60 cm or 50x70 cm.

The remaining options are easy to calculate.

Reviews

1Marina, 21 years old: I’m a student, I don’t have extra money and the ability to take good care of my bed. That's why I buy inexpensive accessories. I have a padding polyester pillow and blanket, I like that they can be washed easily and are quite comfortable to sleep on. 2Grigory, 47 years old: I don’t see anything wrong with padding polyester, I’ve been using such pillows all my life. I bought the last one three years ago, so far so good. 3Vladlena, 38 years old: due to allergies, I don’t use natural materials. The synthetic polyester pillow is inexpensive, I have no allergies to it. But not very comfortable, I like synthetic fluff better. 4Dmitry, 30 years old: I can’t sleep on a synthetic padding pillow. Too soft, then my back hurts. But it’s convenient to take it with you on a trip; you don’t have to worry if it gets dirty or something happens.

Many people will like synthetic pillows for their low maintenance and low price. They are not suitable for people with spinal problems, but others will appreciate their lightness and hypoallergenicity.

How to fluff a feather pillow

A feather pillow has many advantages, however, the naturalness of the composition can lead to harmful microorganisms accumulating and multiplying inside the filler. Therefore, it should be whisked as often as possible as this prevents caking and clumps. If the feathers are very tangled and compressed, they emit an odor, and even washing does not return them to normal, then such a pillow should be replaced. In this case, beating is already powerless.

Traditional methods for cleaning pillows from dust and dirt

How to wash a feather pillow at home without ruining it. In this case, “grandmother’s” methods are suitable. They were used when automatic machines had not yet been invented, but they did not lose their effectiveness!

Pre-soaking with lemon juice

A kind of dry cleaning of feather pillows at home was created using lemon juice. It has natural whitening properties as it effectively removes oils.

The original recipe uses natural lemon, and in the amount of 6 pieces. If you can’t get them, use regular citric acid. Replace in the proportions “1 lemon – tsp. with a pile of powder."

So, you can prepare bleach like this:

Squeeze 6 lemons, removing seeds and pulp. This can be done using a manual juicer.
Boil 3 liters of water. Ideally, take distilled. Add juice to it. If more is needed, increase the amount of water in the proportion of “0.5 l. – 1 lemon.”
The pillow must be placed in a basin and filled with solution. It is necessary that the water completely covers the fabric.
After 3 hours, squeeze out and wash in any way.

Dry cleaning with baking soda and tea tree essential oil

Tea tree oil is a natural antifungal and bactericidal agent.

When combined with baking soda, it forms something similar to regular soap, but more effective.

Dry cleaning of pillows is done as follows:

In a bowl, mix 100 grams of regular baking soda with 12 drops of oil (sold at the pharmacy). Mix until a slightly moist powder forms.
Rub the pillow thoroughly with this mixture and leave for an hour.
Then shake it out and vacuum it.

The pillow is crumpled, what should I do?

If the sleeping pillow is simply compacted and caked, then you need to grab its sides and make several movements, like an accordion, squeezing and unclenching its filling, while simultaneously kneading it with your hands. If necessary, repeat the process from different sides several times.

If it is crumpled inside into lumps, then the situation can be corrected by combing the filler (down, holofiber, etc.) with hand combs (metal brushes). An example of how to do this in the video below:

How to fluff padding polyester in a pillow

It happens that after washing, the filling made of holofiber or padding polyester can become very loose. In such a situation, you should soak it and gently beat it with your hands, and then send it to dry and beat it again periodically.

You can also try moving the lumps with a vacuum cleaner by running it over the damp surface. As a last resort, you simply need to disassemble and fluff all the fibers of the padding polyester with your hands.

In general, we can say that there is nothing complicated in caring for pillows. It is only important not to forget to whisk it regularly, avoiding the formation of lumps and compactions, otherwise it will be somewhat more difficult to beat the caked material.

Ways to straighten out stray padding polyester

There are several ways to straighten padding polyester in a jacket or blanket.

With a vacuum cleaner. Everything is very simple. The product does not dry after washing, but is immediately laid out on the floor, the vacuum cleaner is turned on, and the brush is removed. The vacuum cleaner tube should be moved over the product in different directions, periodically checking and adjusting the padding polyester with your hands. From those areas where he has strayed, you need to use a vacuum cleaner to lead him to empty areas. And so you need to go through the entire product. It is better to work by sectors. First, straighten the padding polyester on the sleeves, then on the shelves, and lastly on the back of the product. After the filler has filled all the voids, the jacket should be left on the floor until completely dry.
A firecracker. Every home has a carpet beater. And if you don’t find one, you can take a flat stick or bat. The dried product should be hung on hangers, and them on a rope. It is advisable to carry out the procedure outdoors or on the balcony. Fasten the jacket with a zipper or buttons. Now you can lightly hit it with a clapper, gradually increasing the tempo, but not the force of the blows. Check to see if the filler has returned to the voids and continue knocking out until the jacket takes on its previous appearance. The same procedure must be carried out after straightening the padding polyester with a vacuum cleaner, but wait until the product has dried. This can also be done for preventive purposes, since the padding polyester can also become loose during wear.
With a simple shake. If during wearing the padding polyester begins to bunch up, you need to take the jacket with both hands so that the voids are at the bottom, and shake it several times in the air. The filler should return to its place.
Radical method. If the filler is severely deformed, you will have to rip out the corresponding seams and straighten it manually or replace it with a new one. In this case, it is better to take the jacket to a sewing shop to professionals.

The difference between machine and hand washing

Hand washing is preferable for pillows filled with holofiber. Washing by hand is considered delicate and prevents excessive creasing of the filler, increasing service life. Despite the fact that manufacturers guarantee that the elasticity of the material will be restored by 80-90% after creasing, in practice this is far from the case. It is better to spend more time, but keep the product in its original form after drying.

Some models of modern washing machines have a mode for washing bedding (pillows, blankets, blankets), which provides the most gentle care for the product.

If possible, it is better to buy a pillow with a removable cover. Holofiber fibers do not crumble, it is not difficult to remove them from the cotton “shell,” and only the cover can be washed at the optimal temperature for the type of fabric.

The most important thing when washing pillows:

Use only liquid detergents for soaking and care, no bleaching compounds.
Even the minimum spin mode in a washing machine is unacceptable.
If possible, it is better to remove the filling from the cover, which is washed in a mode in accordance with the type of fabric. While the cover is being washed, the filling is laid out in a ventilated room - this will remove foreign odors from it and refresh it.
Maximum temperature is 30 degrees Celsius. It is advisable to measure the water with a thermometer or elbow - if the temperature feels hot, it means the readings are above 37C.
Optimal care – in summer, drying is quick and hassle-free. In winter, organizing drying will be more difficult.

To extend the service life, it is recommended to leave the sleep attribute for ventilation during the warm season. You can carry out this manipulation on the balcony, providing access to fresh air into the room, or you can take it outside and place it in a ventilated place, avoiding excessive direct sunlight. It is recommended to dry the pillow twice during the season - at the end of spring and beginning of autumn.

Price

The better the quality of the padding polyester placed inside the pillow, the more natural the fabric from which the cover is made, the higher the cost of the item. It’s not worth buying a budget model to use it every day. It will quickly lose its characteristics, the money will be wasted.

Not too expensive pillows are good for sudden guests who do not stay for long, for use in the country, in nature.

The price of accessories in size 60 by 60 in a case made of cheap fabric is from 100 rubles, in size 70 by 70 - from 120 rubles. This applies to wholesale purchases.

In regular stores the prices are higher, however, and here you can make a bargain.

Driver airbag repair procedure

Using the driver's side airbag as an example, you can briefly learn how restoration is performed. Buying new airbags is quite expensive. Therefore, most often, motorists give preference to the restoration option, when the squib is changed and the control unit is reflashed.

To complete this task you need:

remove the panel from the airbag where the airbag inscription or icon is located;
disconnect the fired airbag from the steering wheel;
remove the decorative plastic cover;
disconnect the squib by unscrewing the required number of nuts;
install new components;
connect to the on-board system and reflash the control unit.

Returning the airbag to full operational status is not so easy. This is a popular service in specialized workshops, which simply cannot be cheap.

What you definitely shouldn’t do is drive with empty airbags, using a dummy, and try to sell the car in this form.

Recovery procedure

When the car is out of warranty, the car owner pays for the restoration of the security system and interior parts. But some drivers want to save money.

Step-by-step instruction

People begin to carry out the procedure independently with experience, plumbing skills, and knowledge of automotive electronics.

Recovery includes several stages:

Remove the squib and replace it with a new one. It is advisable to conduct an operation test on special equipment.
Replace sensors.
Place a new PB bag.
Check the wires for melting. If necessary, replace damaged wiring. It's better to buy the entire repair kit.
Reflash or replace the airbag control unit.
Restore the trim.

By acting on your own, you will save up to 15 thousand rubles.

Machine washable features

Before you start washing holofiber pillows in the washing machine, you should carefully read the product manufacturer’s recommendations. It is best to wash by hand - this will maximize the service life of the sleep item. When washing in a machine, a number of conditions must be observed:

Use only liquid washing powder. The granulated product is not recommended for use due to poor rinsing of powder residues from the fibers and, as a result, an increased risk of developing allergic reactions in the form of lacrimation, sneezing, red eyes, irritation of the skin of the face and neck.
Maximum temperature – 30 degrees.
If possible, select the delicate mode or the “Hand Wash” mode.
The spin function is completely disabled.

When caring, it is strictly forbidden to use bleaching components that severely damage the fiber structure.

By following these simple rules, you can prevent excessive clumping of the filler and maintain the original appearance of the product.

With the help of specialists

When fully restoring an airbag, the technicians perform the work described above for you sequentially.

How much does it cost

A banal installation of an “imitation” airbag will cost a pittance - sometimes 200-250 rubles, but it will be a dummy that will not do anything in the event of an accident, that is, you are actually left without an airbag. Normal restoration is more expensive - replacing one squib can cost from 500 rubles, and the final price for the entire work can be from several thousand rubles .

How experts restore pillows

Just contact the service center, explain what you need and agree on a time frame for completing the work.

Which pillows last longer?

Thanks to the ability to quickly restore their original shape, pillows

with microgel
they last
a long time: 5–7 years. Cons: the price is higher than other synthetic fillers.

Interesting materials:

How to understand the wind rose? How to dilute Fitoverm for roses? How to propagate Ground Cover Rose? How to dilute potassium sulfate for roses? How to dilute superphosphate for roses? How to dilute Bordeaux mixture for roses? How to dilute magnesium sulfate for roses? How to dilute fertilizer for Fasco roses? How to revive a stone rose? How to form a climbing rose?

Drying pillows with holofiber

After completing the program or hand washing, you should carefully squeeze out the pillow by hand without twisting it. Drying is carried out in a horizontal position, in a well-ventilated area. Therefore, it is recommended to wash it in the warm season, when the pillow can be dried on the balcony or loggia. The product is placed on a towel, grill or other surface that promotes good ventilation over the entire surface and removes excess moisture. Periodically during the drying process the pillow must be turned over.

What to do after triggering

If we immediately talk about the question of whether it is possible to restore deployed airbags in the event of an accident, this can be done realistically. And even necessary. Only here we are talking about restoring the system itself. It is impossible to revive airbags that have already fired. This is a purely one-time thing.

New safety requirements force car manufacturers to install at least 2 airbags as standard.

They can go off in a collision with other cars, in the event of hitting some obstacles, or when heavy objects fall on the car. That is, the conditions for triggering a special sensor are created, and the airbag is triggered.

At the moment of impact, a special fabric with special impregnation breaks out from the steering wheel and front panel, which is filled with air. All this happens in a split second in order to prevent a person from hitting the steering wheel or dashboard.

But you can’t drive any further with blown airbags. To begin with, the sheathing was torn and needed to be repaired. But we also need to resolve the issue of the future fate of the pillows.

There are several options here:

perform the recovery procedure;
install new pillows;
install cushions from used cars purchased at car dismantling yards;
apply a dummy.

Many used cars have a dummy installed under the guise of an active airbag. There is a high risk that the airbags will not deploy in an accident. Don't fall for this trick.

Therefore, one of the most important components of checking any car purchased on the secondary market is studying the accident history and checking the airbags.

Mistakes housewives make when washing pillows

Before you wash your feather pillow in the washing machine, it doesn’t hurt to learn the main mistakes.

Here they are:

The more foam is released, the better the dirt will be washed off. This is an incorrect judgment, since this causes the down and feathers to stick together. Add detergent a little at a time.
1 rinse procedure. Natural down products absorb detergent very well, which cannot be removed with one rinse. The procedure must be repeated at least 3 times.
Heat. As was written earlier, this negatively affects the quality of the fluff.
Too much air conditioning. A nice smell is good, but it's almost impossible to get all the conditioner out of your pillow.

FAQ

Is it possible not to restore airbags at all?

It was explained above that they can be replaced with a dummy, but in the event of an accident, no one can guarantee the preservation of the health and life of passengers.

What should I do if the airbag light is blinking, does not go out, or does not light up?

The renovation is not complete! Malfunction of any of the above-described system elements. If you can’t fix it yourself, contact the experts.