How to properly fold a jacket in a suitcase so that it doesn’t get wrinkled? tips and ideas

On a business trip or on vacation, you want to look neat and tasteful. However, it is not always possible to use an iron away from home. One of the secrets to keeping clothes wrinkle-free is to pack them correctly in a suitcase. How can you compactly fold a jacket into a suitcase so that it doesn’t get wrinkled? After all, it is impossible to imagine that a presentable man or an elegant woman would allow themselves to wear this piece of clothing in an unsightly manner. There are several effective life hacks for this!

Work algorithm

The parts need to be ironed in a certain sequence.
Proceed as written below, then you will like the result of the work: Pockets. Ironing begins from the pockets, from the wrong side. They need to be turned inside out, the folds smoothed out and ironed through a damp cloth, and then carefully turned back inside out. Sleeves and shoulders. This is perhaps the most difficult moment. It is better to moisten both sleeves and shoulders and continue ironing until dry. In this case, a special stand for sleeves will be very useful. Such stands are sold complete with modern ironing boards or purchased separately. It won’t be easy to iron sleeves just on a board, but there is a way out. Use a folded towel and insert it inside your sleeve. There are also special pads for the hangers, and if there are none, adjust the towel again. Pay attention to the seams, elbow and shoulder - they must be carefully straightened and ironed. Collar, back and shelves If we ironed the previous parts from the inside out, now the jacket needs to be turned over to the front side. It is not difficult to iron the back and shelves, and after this stage the work can be considered almost finished. Collar and lapels. These details must be treated with the same attention as the sleeves. Although they are small, with a wrinkled collar or lapel the jacket immediately loses its appearance. They should be ironed from the front side through a damp cloth, just like the back with shelves

If the part is very wrinkled, tighten it with one hand and carefully apply the iron with the other. In this case, it is advisable to wet not only the material through which you are ironing, but also the part itself

It is convenient to straighten the corners with the sharp tip of the iron.

Jackets are made not only from suit fabrics; leather, wool and corduroy models are also available. Caring for them varies and is described in detail in other sections of the site.

Now let’s pay attention to the features of ironing a wool and corduroy jacket

Laying methods

Not everyone knows how to properly fold a jacket into a suitcase so that later they can get it out in perfect shape. There are various methods, each with its own characteristics.

A popular method is to pack it in a compact cylinder that fits at the bottom of a suitcase without taking up much space. To roll things up with a roller you need to do the following:

  1. Turn the sleeve inside out, aligning the position on the shoulder.
  2. The sleeves turned inside out are inserted one into the other so that both parts become even along the entire length.
  3. The jacket is laid out along a flat plane, carefully leveled along the edges, resulting in a rectangle.
  4. The sleeve is placed at the top.
  5. To prevent the shoulders from becoming wrinkled, small rolled-up items (socks, T-shirts) are placed inside.
  6. Clothes are neatly rolled up without wrinkles or creases.

The product will retain its original appearance, even if it is folded for a long time.

Rectangle

To prevent your jacket from getting wrinkled on the road, you can give it a rectangular shape. The procedure will be as follows:

  1. The jacket is turned inside out so that the lining fabric is on the outside. Then all the creases, wrinkles, folds will be inside.
  2. To align the outside, the shoulders are straightened with the hand inside. This is done so that bulky shoulder pads do not interfere with the neat folding of the jacket.
  3. The shoulders are grasped with one hand, the other grabs the item by the middle of the collar. The product folds vertically along its entire length. The material expands well.
  4. The item is folded in half horizontally across the elbow.

If everything is done according to the instructions, the folded jacket will take on a rectangular shape.

Without eversion

This method of folding a jacket is simple, but when using it, creases may form on the product. This type of styling is used when upon arrival there will be time and the opportunity to steam or iron the item. You can add it like this:

  1. The item of clothing is laid out on a horizontal, flat plane with the buttons down.
  2. The shoulder and sleeve are folded over the middle part of the back.
  3. The same actions are carried out with the other shoulder and sleeve.
  4. The sleeves are aligned parallel to the seams.
  5. Some clothes, for example, trousers, are folded lengthwise.
  6. The trousers are laid on one half of the jacket and covered with the other. The pants end up inside the product.

After transporting the item in this form, it requires a little ironing or steaming.

If things look slightly wrinkled after the suitcase, they should be hung on hangers and placed in the bathroom with hot water turned on, generating steam. After 30-40 minutes, things will look great without ironing.

Steam generator application

A steam generator is a convenient device for steaming any clothes. It’s very easy to tidy up your jacket with it. The steam generator is filled with water and the vertical steaming mode and the desired temperature are set. The jacket is hung on hangers. First, steam the sleeves by lifting them with your free hand. For steaming, the steam generator is kept at a distance of 10-15 cm. Then the shelves and back are steamed one by one. If the fabric is fleecy, then the steam generator is kept at a distance of 20 cm from the surface. Work should be carried out with movements in the direction of the pile. A good alternative to a steam generator is a hand-held steamer. It is comfortable to hold in your hand. The operating principle is the same as with vertical steaming.

How to store it correctly?

Once you arrive at your destination, perform the steps in reverse order. Take out the things folded on top of the packaging, take out the packed jacket itself. Open the package and straighten the clothing, paying attention to folds.

Turn the clothes inside out and hang them on hangers. Sometimes even the most careful packaging does not prevent wrinkles and creasing. If this happens, hang the jacket on hangers in the bathhouse. Turn on the hot water. The steam from it will act on the fibers of the fabric, saturating them with moisture. Heat and moisture will soften the material, straightening out small wrinkles.

How to fold a jacket?

By using the correct folding technique, you can avoid the appearance of small folds and creases on products. Let's consider several options that will help preserve the appearance of the product as much as possible after transportation.

Method No. 1

How to fold a jacket without wrinkles:

  • First of all, we turn out one of the sleeves and align the stand along the shoulder line.
  • The second sleeve does not need to be turned out. We insert it with the shoulder into the shoulder of the inverted sleeve, carefully leveling it along the entire length.
  • After this, lay the jacket on a horizontal surface and align the sides.
  • We correct the sleeve and lay it on top. The end result is a rectangle that has equal sides. This folding process creates a void inside the shoulder, which, when folded, creates a fold.

Method No. 2

In order not to spoil the appearance of the jacket, fold it this way:

  1. We take the jacket by the collar part and twist only one shoulder to the wrong side.
  2. Using the other shoulder, we insert the half of the jacket into the resulting space. If you managed to do everything correctly, then the front surfaces of the hangers should be in contact with each other. In this case, the jacket is turned inside out.
  3. We align the halves of the product at the seams so that a rectangle is formed.
  4. We fold the resulting structure in half.

Method No. 3

This method of folding involves not turning the jacket inside out. In this case, shallow folds form in places where there are kinks on the front side of the product. Therefore, when you travel, you cannot take your jacket out of your suitcase and immediately wear it to a special event.

How to put a jacket in a bag:

  1. Unfold the product on a horizontal plane so that the back of the jacket is at the top.
  2. We take the jacket with one hand at the point of the middle of the shoulder and mentally find the middle line along the back surface of the product.
  3. We wrap part of the jacket up to this line.
  4. Align all seams on the sleeve.
  5. We wrap the other side of the product in exactly the same way.
  6. The third fold occurs by folding the resulting rectangle in half so that a square is formed.
  7. We put the jacket in the bag.

Method No. 4

To fold your jacket correctly, you need to do the following:

Together with the sleeves, turn the jacket inside out. We put our hands inside in order to straighten the shoulders well. In one hand we connect the two shoulders, and with the other hand we take the product in the middle of the collar

We carefully straighten the clothes, especially paying attention to the seams that are located along the length. We straighten the fabric from both the front and back sides. Turning over the elbow, fold the upper part of the suit along a horizontal line. The result is a square convolution

This form does not take up much space and can easily fit into any bag or suitcase.

Method No. 5

How to fold a jacket to preserve its original appearance as much as possible:

  • We place the upper part of the suit on a table or any horizontal surface.
  • Fasten all the buttons.
  • Carefully turn the clothes over with the buttons facing down.
  • With one hand we hold the product in the middle of the shoulder seam, with the other hand we take it by the lower part of the jacket and wrap the side along with the sleeve onto the back of the garment.
  • Now let's move on to the sleeve. We bend the sleeve along the armhole line so that it is strictly parallel to the previous fold.
  • Using the same technology, you need to fold the upper part of the suit on the other side, and fold the second sleeve in the same way.

Fast

A great option on how to simply and correctly fold a jacket so that it doesn’t wrinkle. The main thing is not to fuss, do everything very carefully.

Progress:

  1. Place both arms through the shoulder part. The jacket should be in front of you. Hold with your palms from the inside out.
  2. Bring your arms together, bringing the shoulder seams together as much as possible.
  3. Place one part of the jacket on top of the other.
  4. Straighten the collar, lapels, align the line of the fastener.
  5. Fold the jacket in half with the front facing up.

With this method of folding, there is no unnecessary pressure on the collar and shoulder part. Therefore, the jacket practically does not wrinkle after transportation. You can take it out, straighten the collar and put it on right away.

Putting shirts in the closet

The best way to store shirts in the closet is considered to be the “hanger” method on a hanger. It is recommended to fasten them with all the buttons. Then the front slats will be in a vertical position and will not move, and, accordingly, wrinkle.

If your apartment or hotel does not have hangers and a special compartment in the closet for them, then you need to store things on shelves. The diagram clearly shows step by step how to fold the shirt sleeves and how this process should occur. Experts advise using cardboard, which is sold along with the product. If you, like many people, threw it away, then don’t worry, as it’s not difficult to find a replacement. You can replace it with a simple rectangular piece of cardboard from a children's art kit, purchased at an office supply store.

Recommendations before packing

Before you start packing your jacket into your suitcase, be sure to check that there is nothing unnecessary left in your pockets. Besides:

  1. It needs to be petted.
  2. To protect it from dirt, you can lay it on a large sheet of wrapping paper and then wrap the jacket or use plastic wrap.
  3. The packaging can be easily secured with adhesive tape.
  4. Special vacuum bags can replace paper and film, from which the air is pumped out after packaging.
  5. To prevent things inside the suitcase from shifting when shaking, fill the free space with small items of clothing - panties, socks or T-shirts.
  6. A hard-shell suitcase will always keep your suit in its best condition.

It would be a good idea to further practice the chosen method in order to spend less time on it, which is already not enough when preparing for a trip. You can save time by making a list of things you will need on a business trip in advance.

Useful tips

Before folding a jacket with trousers, it is better to familiarize yourself with the following rules:

  1. Before placing the suit, you should steam it thoroughly in a dry cleaner or yourself, if you have the skills and a special tool.
  2. It is necessary to remove all objects from the pockets so that their shape is not imprinted on the product.
  3. It is not recommended to fasten product parts with clothespins or clips; dents will remain on the fabric.
  4. It is better to use a special bag to pack the jacket and trousers, leaving a small amount of air in it, which will become a layer between the suit and other things.
  5. To further protect the product, packaging materials can be used. Things are placed on a piece of paper or polyethylene and rolled up with them. In this case, the material is secured with tape at all stages.
  6. It is better to practice folding items of clothing beforehand, since it is not a fact that you will get a neat fold the first time.
  7. It is necessary to ensure that the folds, if possible, go straight along the seams.
  8. If, upon removal from the suitcase, wrinkles were found on the items and you had to use hot steam to remove them, then you need to let the items dry well on a hanger before putting them on.
  9. To keep the number of folds and irregularities to a minimum, it is better to pack things in a bag or suitcase made of hard material.
  10. Tough, bulky shoes are placed near the sides of the suitcase so as not to wrinkle the suit.

The main place in the suitcase is reserved for storing the jacket and trousers; casual clothes, underwear, socks and other things are placed in the free space.

Using the rules for packing a jacket and trousers, you can transport a suit in a suitcase and still maintain its impeccable appearance. Ironed edges, lapels, pockets, vents on a jacket and creases on trousers will remain in perfect condition if the items are folded carefully and neatly.

Travel tips

Placing your suit in your suitcase should take into account other items you intend to take with you. Below is a list of useful recommendations on how to get ready for the trip:

  • Always pack your shoes first - they take up a lot of space and, due to their rigidity, can ruin ironed clothes.
  • Place small elements of the image along the walls of the bag.
  • Don't take too many things with you - try to choose only the essentials.
  • Standard folding often results in wrinkles, so squeeze items as tightly as possible.
  • It is not advisable to wear a formal suit when flying. When you fasten your seat belt, it won't reflect well on your outfit.
  • If traveling or business trips are a frequent occurrence in your life, then it is advisable to purchase a backpack for transporting clothes. You can find the largest range of high-quality leather bags in the Piquadro online store.

Armed with the above methods, you can not only maintain the presentable appearance of your business attire, but also significantly save scarce space in your suitcase.

Preparing for ironing

Before ironing your jacket, make sure it is clean enough.

Important! If there are any stains or dirt on the fabric, after heat treatment they will go deep into the fibers. It will be difficult to remove them. If there is no serious contamination, still clean the product with a clothes brush

This will help remove dust and hair. Then lay out the clothes on the ironing board. Every time you refold it, carefully straighten out the folds on the lining and on the front side.

If there is no serious contamination, still clean the product with a clothes brush. This will help remove dust and hair. Then lay out the clothes on the ironing board. Every time you refold it, carefully straighten out the folds on the lining and on the front side.

In order to properly iron the suit material, you will need a damp cloth. It will act as a protective pad between the surface of the clothing and the iron. Linen is best suited, but cotton can also be used. The simplest option is gauze, which needs to be folded in several layers and moistened during ironing. It is better to take settled water and pour it into a cup. If you can pour it directly into the iron, then it is more convenient to moisturize the fabric with its help.

Classic models usually begin to shine if you iron them directly on the surface. If the jacket has already begun to shine, wet it and iron it through a dry cloth.

When you turn on the iron, immediately set the temperature setting. A guide to the choice of heating is the label on the reverse side of the product.

For items made from natural wool, the temperature should not exceed 165°C.

Secrets of storing clothes

It is known that some people can wear outerwear for many years without losing their presentation. And at the same time, there are people whose shirts, jackets and trousers quickly break down.

It should be kept in mind: the more often things are washed and ironed, the more their service life is reduced, since these manipulations are stressful for them.

Over time, the structure of the fabric, weakened by constant external interventions, becomes deformed, the suit fades, begins to wrinkle more often, and where the folds most often occur, the fabric gradually wears out. Accordingly, in order to extend the service life of the suit, you need to expose it to various types of influences as little as possible. The jacket will not wrinkle or get dirty if you fold it not haphazardly, but along certain lines. It is also important to fold your outerwear correctly because:

  • this will help you easily fit everything you need for your trip into your travel suitcase;
  • when folded correctly, there are no bends or creases left on the fabric, which significantly spoil the presentation of the item;
  • clothes, somehow rolled into a ball, get dirty much faster than wardrobe items neatly folded according to all the rules;
  • When folded correctly, the fabric structure does not deform.

If a man is married, his suit is usually looked after by a caring wife. But the gentleman himself must know how to properly care for his clothes if he always wants to look smart and presentable. If clothes are put away only at night, it is not at all necessary to fold your jacket or shirt, but it is also not advisable to just put them on a chair or sofa.

It is necessary to carefully hang the item of clothing on the back of the chair, straightening out all the folds, or place the jacket on plastic hangers. It is especially important to follow this rule if there are pets at home. Many pets have the bad habit of rubbing against their owner’s jacket, leaving fur and dander on it, and also marking clothes.

What to do if clothes are wrinkled after transportation

It may happen that despite all your efforts and strict adherence to the rules when packing your suitcase, your shirt is still wrinkled. What to do if you don’t have the time or opportunity to iron a thing, but you need it? Restoring a decent appearance is not difficult at all.

Use the "steam" method. Turn on the hot water in the bathroom and close the door tightly. After the air temperature and humidity in the room rise, leave the shirt hanging on a hanger there for 15-20 minutes, and then wait for it to dry. Do not put the item on immediately after “steaming” the folds; wait a while, otherwise the item will wrinkle even more.

It should be noted that this method is effective in many cases, but there are exceptions. For example, some types of linen or cotton fabrics will become covered with even more folds from such exposure than were originally there. In this case, all you have to do is use an iron if your suit is wrinkled.

What should you pay attention to so that the suit does not wrinkle?

The rolled method of rolling trousers is safer . Even if you do something wrong, you will end up with fewer wrinkles and the item will be easier to iron. Well, the idea of ​​asking for help from a dry cleaner at the preparatory stage of getting ready for the trip is preferable for the reason that during production the suit is impregnated with special products. They help the product keep its shape, but they cannot be called persistent - water washes away the active substances.

Therefore, every wash at home greatly affects the appearance of trousers and jackets.

Dry cleaners and laundries are well aware of impregnation for wardrobe items made from office fabric. Before placing an order, local employees treat items with specialized compounds similar to those used in production.

However,
no substances will help if you do not use covers .
Expensive wardrobe items must be transported in special packages, which can be purchased from a transport company. They are also available in some sewing stores, as well as in ready-made suit boutiques. If you cannot avoid wrinkles, fill the bathtub with hot water and close the doors tightly. After the room is filled with hot air, hang the suit in it on hangers. The most noticeable defects will be smoothed out.

How to fold a jacket into a suitcase

Everyone who has ever gone on a business trip for important business negotiations faces the problem of how to put a jacket in a suitcase. At such meetings, a formal suit is a must. It is clear that it includes such an important detail as a jacket.

In fact, a jacket is a rather difficult item of clothing to transport. It has significant dimensions, various small parts, the material wrinkles very easily, and is sometimes very difficult to fold. However, despite such difficulties, it can be packaged in several ways, each of which does not imply anything complicated. We will tell you how to cope with difficulties and deliver your jacket to its destination safe and sound.

Shirt and chemise: what is the difference

At the end of the material, we will touch on one popular question: how does a shirt differ from a shirt. Spoiler: in the picture on the left is a shirt, on the right is a shirt.

  • The bottom edge of a shirt is most often rounded, i.e. longer in front and back than on the sides. The shirt is always the same length on all sides.
  • A classic shirt does not have buttons on the cuffs, because... they are designed for cufflinks. Although now this rule is often deviated from for the sake of convenience.
  • A shirt most often has a straight silhouette, while a shirt can be quite tightly fitted.
  • A shirt can be sporty, with appliqués and contrasting decorative elements, but a shirt - never.
  • The shirt has a rather impressive length, sometimes reaching almost to the knees. The shirt can be any length.

  • A shirt can be worn untucked, but a shirt - never, it must be tucked into trousers.
  • In addition, they can be distinguished by the collar: the collar of the shirt is rigid, because suggests a tie; a shirt may have a soft one.
  • The shirt was originally a piece of underwear, which is why they are still made from thin and pleasant fabrics. Shirts are also made from fairly coarse fabrics, sometimes they can even be part of outerwear.
  • Shirts can have sleeves of any length or may not have them at all; shirts always have sleeves up to the wrist.
  • And most importantly: a shirt cannot be worn just like that, without a jacket or at least a suit vest. The shirt is completely independent.

How to fold a jacket neatly

You need to fold your jacket for storage or travel so that it remains unwrinkled and takes up little space in your bag. If you follow all the recommendations, the item will retain its original appearance.

How to fold a jacket without wrinkles

You can fold it compactly in a simple way:

  1. Take the item by the collar and turn one shoulder inside out.

Before storing your jacket, be sure to clean it and iron it with steam. This allows you to smooth out the wrinkles well. If there is no heavy contamination, then you don’t have to send the item to the dry cleaner.

This method is also suitable for folding a jacket into a suitcase or travel bag. The video shows the process in more detail.

How to fold a jacket for a gift

There are times when a woman wants to present her man with an expensive and practical jacket or suit for a holiday. Simply bringing it on a hanger will not be entirely appropriate; the item needs to be beautifully folded and packaged.

You can do this just like in a store without turning the product inside out. A little trick will help you lay it out beautifully:

  1. Place the item on a flat, hard surface with its back facing you.

Now you can pack it in a transparent gift bag and tie it with ribbon. However, it is worth noting that you will have to iron the item before putting it on.

How to put a suit in a suitcase

There are different ways to compactly fold a men's suit for a short business trip into a suitcase. But the most beloved among the strong half of humanity remains this one:

  1. Turn one sleeve inside out and align the collar. Insert the second sleeve into the first without turning it inside out.

Many men can confirm that folding a suit or jacket into a bag in this way is very convenient. The item retains its appearance and does not wrinkle. However, the product is first ironed well. This can be done in the classic way, but through a thin natural iron, so as not to spoil the fabric.

How to neatly fold a suit into a backpack

To fold the suit for a long journey, it is convenient to roll it up or roll it up. The jacket is treated as described above, and the trousers are folded in half, aligning the arrows. Next, they put them on top of the jacket, and roll everything up.

The compact package fits well even in a small backpack. And what’s remarkable is that there is no need to iron the suit before putting it on.

How to fold a suit into a bag

Before storing the suit in a bag, it must be folded correctly. There is a small instruction on how to do this compactly:

  1. Fold the jacket in half at the center of the back. Place one shoulder over the other. It turns out that the first side of the product is inside out. Pull both sleeves to the wrong side and roll them over the back.

How to fold a jacket compactly

Folding a jacket so that it takes up little space and doesn’t get wrinkled requires a lot of effort. This can be done in a simple and accessible way:

  1. Turn the sides of the product inside out so that the sleeves remain inside.

How to fold a jacket for travel

There is another simple way to put a jacket for a business trip in a travel bag or suitcase. To do this, proceed according to the instructions:

  1. Turn the sides inside out.

This method allows you to store the jacket in your bag for several days. After which you need to take it out and hang it on a hanger. Over time, the item will return to its original appearance.

How to fold a jacket beautifully

You can roll up the thing beautifully and compactly as follows:

  1. Place on a hard surface with your back facing you. Spread the sleeves to the sides.

However, before packing it in this way, it is cleaned of any dirt, pockets are emptied, and ironed.

How to pack a jacket

The jacket should be packed flat for long-term storage. It, together with the hanger, is placed in a special bag or case, which is fastened along its entire length. After this, the bottom edge of the cover is folded to the top. The result is a compact package that can be placed in a box.

"Rectangle"

It is recommended to fold this way if the jacket has to be transported in a hard suitcase. The folded trousers should be placed inside the clothes, and the rectangle itself should be placed between the layers of the rest of the clothes.

Sequencing:

  1. Unbutton the jacket, straightening the collar.
  2. Turn one shoulder part inside out and carefully smooth out the sleeve.
  3. Place the other shoulder part into the first without turning it inside out. Align the seams, straighten the folds on the sleeve.
  4. Connect and align the shelves along the long edge.
  5. Fold the product in half.

The jacket folded into an envelope will remain placed in a case (package) or immediately packed into a suitcase.

Folding methods

There are several common options for packing a jacket in a suitcase to preserve its appearance. If everything is done correctly, upon arrival at your destination you will be able to take it out of your suitcase ready to wear.

Roll

In this case, the jacket is folded into a small neat roll, which is placed at the bottom of the suitcase. The method is quite difficult, but when you take it out of your suitcase, you can immediately put it on. If you travel frequently, you simply must master it to perfection. This method will also work for any other clothing. This installation is performed in the following order:

  • one sleeve is turned inside out, the collar should be straightened;
  • the second sleeve is inserted inside the first, so that both elements are the same length. Check that the seams on the sides of the sleeves are parallel;
  • the jacket is aligned along the edges on a table or other flat surface to obtain the correct rectangular shape;
  • the sleeves are rolled up towards the middle; it is recommended to place rolled up socks, a T-shirt or just a wad of paper inside. This will help avoid shoulder jams;
  • The resulting rectangle is tightly rolled into a roll. It is advisable to place it down and against the wall of the suitcase so that it is pressed against other things on the road.

Rectangle

Another way to prevent your jacket from getting wrinkled on the go is to fold it into a rectangle. In this form, it will also take up very little space in your suitcase. Rolling it up this way will be faster and easier. This method is good for folding wool products. Procedure:

  • the jacket is turned inside out;
  • the shoulders are straightened so that the inserts in them do not interfere with folding it;
  • The jacket is taken by the shoulders and the middle of the collar, folded vertically and aligned along the side seams. The result should be a rectangle;
  • at the final stage it is folded in half again. It is advisable to put some things under the suitcase and press it with something heavy on top.

Fast

Folding a jacket in this way is very easy, but it has its drawback - “creases” may appear on the fabric. It will also not be possible to use it if the material of the product is too thick. If “creases” could not be avoided, after removal you need to iron or steam the jacket. Thus, this method is suitable for those who do not need a suit immediately after arriving at their destination. If it is made of materials that wrinkle easily, you should put a rectangular piece of cardboard or a thick magazine inside. The jacket is folded in the following order:

  • lays out on a flat horizontal surface with its back facing up;
  • the shoulders together with the sleeve are alternately folded over the back so that the edge of the hem lies along the seam in the middle;
  • the sleeves are aligned parallel to each other, the folds are straightened and smoothed out;
  • The jacket folds in half. In this case, you can put suit trousers or other items of clothing inside. This will make the inevitable creases on the fold less noticeable. To prevent it from unfolding, you need to put a few things on top of it.

"Like a shirt"

When folding a jacket this way, it may also wrinkle a little and will require ironing or time to loosen. In this form, it should be laid on top of other things so as not to crush the collar. We collapse it step by step:

  • the jacket is buttoned and laid out with the back up, the sleeves should be straightened;
  • the edges of the jacket are wrapped towards the middle of the back, you should be guided by the seam;
  • the sleeves are laid flush with the resulting edge so as to form a rectangle;
  • it flips over and folds in half.

Method "Cylinder"

Almost repeats all the points of the first method. You can find an option when with this method one sleeve is turned out and the second is inserted into it. Both are equally good for transporting suits.

  1. Carefully turn the shoulder (if you want, the sleeve too) and shake it, straightening it;
  2. We insert the other shoulder (together with the sleeve according to the second option) into the first one with the front side;
  3. Lightly shake the jacket to remove invisible wrinkles inside;
  4. Align the shelves and place the entire structure on a flat surface;
  5. Place folded T-shirts, shirts and underwear on the collar end.
  6. Roll the clothing into a tight, even roll and place it at the bottom of the suitcase, surrounded by other items to prevent it from unraveling during transport.

Face-out folding

In this case, you should not turn the jacket inside out, but this method is not suitable for everyone, since folding the suit in this way will not allow you to immediately put it on upon arrival at your destination and go to a business meeting. And all because with this folding option, creases and folds may form on the front side of the product. But if you have the opportunity and time to iron or steam your jacket, you can easily use this method:

Place the jacket face down on a flat, flat surface. Mentally draw a line down the center, starting from the neckline and ending with the bottom edge of the product. Then grab the corner of your shoulder with one hand and hold the bottom of your jacket with the other. After this, fold this part of the product right side onto the back. Try to keep the side edge of the garment aligned with the center line on the back. Carefully place the folded sleeve on top

It is important that its borders do not protrude beyond the figurative central line. Extend the sleeve over its entire length and check that the seams are even. Do the same with the other side of the jacket.

Place the folded second sleeve on top of the first. It turned out that the product was folded in three. Once again, walk your hand along the entire length of the clothing and smooth out any possible waves, folds and creases. The final step is to fold the suit in half so that the product has a square appearance. To avoid severe kinks and folds, place any other folded clothing inside the jacket before folding. For example, it could be suit pants or a pair of T-shirts. Now you can put your jacket in your bag. To prevent the item from unfolding, place several dense items on top of it.

"Like a shirt"

It is better to lay a jacket folded in this way on top of all your clothes to protect the collar from creases. In addition, after arrival you will need to steam or iron the item, since the back and sleeves will wrinkle.

Procedure:

  1. Fasten the jacket with all the buttons.
  2. Place face down on a flat surface and straighten.
  3. Visually divide the shoulder part in half, then turn the outermost part towards the middle of the back.
  4. Align the sleeves, straighten the folds.
  5. Repeat the steps on the opposite side.
  6. Turn the jacket over with the clasp facing up and smooth out any creases on the collar and lapels.

If trousers are attached to the jacket, then they must be folded along the arrows, folded in thirds. After this, lay it on the middle part of the back.

Useful tips

  1. You can use ribbon or an elastic band when rolling the jacket into a roll shape. In this case, the packaged item will not unwind.
  2. It is better not to place a folded jacket at the bottom of a bag. Things on top can ruin its shape. Then all efforts to maintain a neat appearance of the jacket will be in vain.
  3. You can compactly fit a suit into a suitcase by rolling the jacket and trousers together into a cylinder shape.

The best option when transporting suits and business clothes is to use covers and travel hangers. However, the tips described above will definitely simplify your life and save you from unnecessary hassle during your vacation or business trip. If the clothes could not be prevented from getting wrinkled, and there is no iron nearby, you can hang them in the steamy bathroom. The steam from the hot water will soften the fabric and remove small wrinkles.

Roller method

A popular way of laying a jacket is to roll the item up. Takes up little space in a suitcase and retains its shape after transportation. Execution sequence:

  1. Turn the sleeves inside out, aligning the shoulder part at the same time.
  2. Thread one sleeve into the other and adjust.
  3. Lay out the jacket on the table, carefully straightening it on all sides.
  4. Place folded small items (socks, T-shirts) in the shoulder area to protect the back and front of the jacket from creases.
  5. Place the sleeve over the product.
  6. Carefully fold the jacket, avoiding folds.

If everything is done correctly, then staying in a suitcase or travel bag will have almost no effect on your clothes. If bruises are found, the jacket should be placed on hangers and allowed to hang.

If you apply the styling rules, the jacket and trousers will retain their presentable appearance as much as possible. Upon arrival, all that remains is to apply the final polish, and you can safely go to a business meeting or celebration without worrying about appearance.

Features of storing jackets

A men's suit costs a lot of money, so you want it to last longer. To do this, you need to properly care for it.

The jacket should be stored in a spacious closet, on a hanger. But the usual one won't do. The best option is a wooden one in a case. It is allowed to use plastic hangers, but they will not withstand heavy sets.

To protect the suit from pests, the item is stored in a case. It is also used for transporting wardrobes. For everyday use, a synthetic case is suitable, but for long-term storage it is packaged in a bag made of natural fabric. It will protect the item from mold and pests.

If there is no dressing room, you need to store it in a closet. But it is regularly ventilated so that there is free access of air and moths do not appear.

Important! It spoils products made from natural fabric, so pest control products are used.

Folding the shirt

You can also transport shirts flat if you know how to fold them correctly. Before your business trip, wash your clothes and iron them thoroughly. After ironing, allow the fabric to cool to prevent wrinkles.

First of all, you should fasten all the buttons. This is a long task as a business trip requires a lot of shirts. After this, turn the shirt face down on a flat surface and straighten out all the folds and seams.

Lay out and unfold the sleeves. If you use dry cleaning services, you probably still have special bags. Roll the bag into a square shape and place it along the center of the shirt. This will create an additional air layer and prevent wrinkles from forming.

Secondly, use your hands to draw two parallel lines along the back and fold the edges of the shirt inward along them so that they meet in the middle. To make it easier to determine where these lines go, you need to understand that at least 2.5 cm and no more than 5 cm of textile should remain on both sides of the collar.

Extend the sleeves along the outer edges. As a result, you should get an even parallelogram. At the third stage, position the sleeves along the resulting edge of the shirt so that they line up with them.

Adjust the shape of the resulting rectangle and straighten the sleeves and folds until the surface is smooth.

At the fourth stage, the turn of packaging comes. As with trousers, vertical folds on a shirt look more natural than horizontal ones. They look as if they were specially ironed. If you have space in your suitcase, it makes sense to fold your shirt in this position. If you don’t have a large bag, you will have to tuck the bottom edge of the shirt. You don't have to worry about it, since this part is located under the jacket and it doesn't have to be 100% ironed.

Fold the shirt into a package and leave some of the air to form an air cushion. Place the packed clothing face up in your bag or suitcase. Place the rest of your wardrobe on both sides and on top of the shirt. As soon as you arrive at your destination, hang your suit, jacket or shirt on hangers and iron if necessary.

Top tips

If you often go on business trips, it makes sense to purchase a special suit bag. If you rarely have to travel long distances, then you should know that many transport companies offer similar bags for rental. This bag will keep your clothes in perfect condition even after a long trip.

Normal folding creates wrinkles, so fold your suit or jacket after carefully rolling it into a tight roll. Place a thin towel or dry cleaning bag along the back of your jacket and shirt to create an extra layer of air.

Useful tips

If your shirt is still a little wrinkled in your suitcase or bag, there is one simple method to correct the situation. You need to hang it on a hanger in the bathroom and open the hot tap, preferably in the shower. When the bathroom is filled with steam, turn off the water and hang the hanger in the thick of the steam. The item should remain in such a steam room for no more than 5-10 minutes. After this, you need to hang it on a hook in a dry room. It will look great, as if it had been ironed.

This method cannot be used in only one case - if the shirt is linen. Although this is a natural fabric, steam can cause it to decrease in size and shrink.

Learning to put a jacket and trousers in a suitcase so they don't get wrinkled

When going on a business trip or a holiday event, you need to pack your clothes in your suitcase in such a way that after your arrival the items will remain unwrinkled. Particular attention should be paid to jackets and jackets, as they are difficult to iron. There are several ways to fold a jacket into a suitcase without getting wrinkled, each of them has its own pros and cons. If you use the recommendations, then the item taken out of the travel bag will be preserved in such a condition that you can immediately put it on, looking neat and presentable.

How to fold a jacket: methods and rules so as not to wrinkle, useful tips

It is customary to store outerwear on trempels, wrapped in a special fabric or wearing a cover for the summer season. But it is not always possible to place all the things in the dressing room; for some there is simply no room

Therefore, it is important to learn how to quickly fold a jacket. This skill will also be required if a person goes on a business trip where he takes a jacket, but he does not want to start ironing from scratch

Basic ways to style a jacket

There are different ways to fold a jacket. However, some of them require preliminary turning inside out, others do not.

The most popular method is to roll it; after this, the clothes always retain their original ironed appearance. There is less chance that outerwear folded into a rectangle will remain in order. But this method takes a minimum of time.

If the likelihood that something could spill is minimal, then you can fold the jacket without turning it inside out.

Roller

Rolling a jacket into a cylinder requires special care and skill. The algorithm is quite simple:

  • iron the jacket thoroughly;
  • turn one sleeve inside out;
  • move your shoulder along the required line;
  • Insert the second sleeve into the first along the entire length, and of course there is no need to turn it inside out;
  • place outerwear on a flat and large table;
  • align the edges of the product;
  • fold straight up, along the sides;
  • be sure to ensure that the bend is along the seam itself and does not extend beyond it;
  • place something bulky on the shoulder recess that you won’t mind if it gets wrinkled (for example, a T-shirt for sleeping, a few warm socks);
  • roll slowly into a roll or cylinder.

When folding, be careful. Creases may form. To prevent this from happening, it is necessary to straighten sections of the fabric if this is foreseen.

Most often, the cylinder laying method is used when you need to place a jacket in a closet for storage.

If you plan to take things on a trip, it is better to roll them in a different way - this way they will take up less space.

Without eversion

The folding without turning option does not always show the best results. It is possible that creases may form on the outer back of the product. Therefore, it would be a good idea to take a special fabric steamer with you in your luggage. However, it needs to be turned inside out, which significantly speeds up the procedure. Required:

  • fold the jacket on a flat surface with the outside down;
  • straighten it over its surface so that no kinks form;
  • bend the outer part of the product towards the back (to do this, you need to visually divide one of the parts of the item into two parts);
  • carry out identical manipulations for the second side;
  • fold in half.

Inside this jacket you can immediately put trousers, previously ironed and correctly folded.

How to fold a suit correctly

Essentially, the jacket folds in one of the last two ways. The trousers are placed inside it. So that there are no creases on them, the arrows do not have to be smoothed back, you need to learn how to fold them correctly:

  • take the trousers by the waist line;
  • pull them out lengthwise (to do this you will need to raise your hands);
  • fold the trousers strictly along the arrows, to do this you need to hold them with one hand and grab the folds on both legs with the other;
  • connect the arrows;
  • straighten your trouser legs to avoid creases;
  • fold onto a flat surface and level again;
  • fold three or even four times - depending on the length and width.

It is important to consider that the bottom of the trouser leg should be inside the folded product. And the belt should only be on the outside

If you change the order of distribution, the hem may become very wrinkled.

Step by step folding instructions

It makes no sense to carefully handle an already wrinkled item. When folding begins, it should be in perfect condition: clean and ironed.

What needs to be done first?

If you do not have the necessary skills or the label prohibits home washing and ironing, you should contact a dry cleaner. This must be done approximately 2 weeks before the expected departure date . It takes less time to get your suit in order, but it’s better to be on the safe side in case of delays from the laundry department.

Fold the jacket. Method 1

  • turn 1 sleeve inside out;
  • align the shoulder stance;
  • Insert the 2nd sleeve into the first one without turning it inside out;
  • align with the shoulder;
  • place the item on a flat surface and align the sides so that the result is a perfectly shaped rectangle;
  • adjust the sleeve in the sleeve and place it on top of the jacket;
  • put socks or underwear into the void formed in the shoulder area;
  • roll up.

How to fold shoes and socks compactly

Shoes are packed in pairs. It is recommended to first wrap it in a plastic bag or a special cover. This will help avoid contaminating other things.

Slippers and sneakers are usually placed on the sides of the suitcase. Heavy boots are placed on the bottom or in the remaining free space.

Be sure to read:

How to properly apply iron-on adhesive to clothes using an iron

You can fold your socks inside your boots or shoes.

To fold them neatly, you need:

  1. Smooth out a pair of socks and place them on top of each other.
  2. Carefully wrap into a small roll.

Several pairs of socks folded this way will easily fit inside the shoes. This ensures the safety of shoes and saves space. This is especially true for shoes and sandals.

Packing a suitcase for a girl on vacation

Girls have the hardest time getting ready for a trip.
For men, the standard set will look like a stack of T-shirts, socks, panties, as well as a bag of shampoo and shaving foam. Representatives of the fair sex always have a more impressive list. Sometimes one cosmetic bag can take up a third of the suitcase space. In this case, it is especially important to pack your things compactly: the luggage is not rubber, but there is so much you need to take with you... Let's start with the cosmetic bag. decorative cosmetics on a trip.

, but also
care products
(creams, lotions, makeup removers, moisturizers).
Not to mention shampoos, hair conditioners, shower gel, etc. A small life hack - you can buy a special travel kit
with small bottles for different products or look for suitable ones at home - 50-100 ml each. This will significantly save space. And when flying, this is completely necessary.

If we talk about clothes, it is best to select sets that can be combined with each other - tops and them, which are combined crosswise.

If you are going abroad, for example, to Turkey, Spain, Italy or other countries, and you plan to take advantage of interesting excursions, be sure to take with you things that are convenient for long walks
. Rubbed feet and burnt arms and back will not add pleasant impressions of the trip.

Plastic suitcase Francesco MolinaryGrott plastic suitcaseBeauty case GrottGrott textile suitcase

How to pack a suitcase at sea: life hacks

If you need to quickly and neatly pack a suitcase or bag for a trip to the sea, here are a few life hacks that will help speed up the packing process:

  • Most things can be rolled up. This way they take up less space.
  • Place things you won't need soon at the bottom.
  • Place all kinds of little things in the corners of your bag or suitcase,
  • If you are traveling abroad, in particular by plane, make sure that you do not have any prohibited items in your luggage or carry-on luggage (this must be checked on the website of the relevant airline),
  • The total volume of liquids should not exceed 1 liter, so it is better to pour all cosmetics into small bottles,
  • Place fragile items in your luggage so that they are surrounded on all sides by something soft,
  • Be sure to weigh your luggage at home to avoid an unpleasant surprise at the airport.
  • Take a separate case for chargers, powerbank, gadgets to pack them in one place,
  • Make scans of documents and upload them to your phone for quick access.
  • Don’t take things “just in case”: pack only what you will definitely use.

These simple rules will help you make packing for your trip comfortable and thoughtful.

Shirt style jacket fold


For the guy on the go, sometimes the easiest way to deal with a suit jacket is to quickly roll it up like a dress shirt.

The sleeves are tucked behind the back, with the shoulders slightly overlapping in the middle. Everything is folded in half from the bottom, tucking the bottom edge under the collar. The lapels and collar sit right at the top, creating a pretty neat square shape.

The resulting package is approximately the same size as in option No. 2, but a little thicker in the middle and not as smooth.

The big problem here is that you are folding the item in multiple places, both vertically and horizontally. This is a good way to get at least a few folds, especially where the folds intersect.

What is the advantage of this option? It's much quicker to fold than the other two folds and easily eliminates the need for a flat surface. You simply tuck the collar of your jacket under your chin and make three quick folds.

If you know you're just going to throw the jacket over the cover for a short time, this will work. For a longer trip or if there will be weight bearing down on it, you'll be better off using one of the other methods.

Features of packing a suitcase at sea with a child or even several children

Packing for a vacation with small children is a much more difficult quest than traveling on your own.
All parents know that on any trip there are always more children's things. The list of necessary things will depend on the age of the child, the duration and distance of the trip. If you are traveling within the country, sometimes you can buy some small things on the spot so as not to carry too much. What if you are planning a trip abroad? How to resolve the issue with a child's potty if the child still uses it and not an adult toilet?

In addition, many nuances arise with children's clothing. It’s easier for some to take a minimum of things and solve the laundry issue on the spot. For others, it’s more convenient to take things in reserve and not ruin your vacation by searching for laundry

or hanging laundry in a hotel room. If you are planning to travel abroad, you can take this opportunity to update your child’s wardrobe with quality items. Therefore, it is better to take only the essentials so that there is enough space for new things. But it’s always easier to grab a piece of good soap in case of quick washes. After all, children will always remain children, and spots often appear on them in the most unpredictable ways.

To properly pack your baby’s clothes, check the forecast for the desired dates. It all depends on the travel time and region. Somewhere it will be hot both at lunchtime and late in the evening, and somewhere for evening walks it’s worth taking warm blouses or even jackets. In hot countries, it is better to wear light-colored clothes so that the baby’s delicate skin does not get sunburned. Especially if the skin itself is quite light.

Remember that folding children's things is half the battle. You will still have to put yours in the suitcase too. Therefore, try to choose only the essentials, even if you want to “walk” your new favorite onesies and dresses.

What you need to pack for a vacation with a child:

  • Documents
    (birth certificate, medical policy, medical certificates),
  • Medicines
    that a child may need, cotton pads and swabs, adhesive plasters, sunscreen and sunburn products,
  • Clothes and underwear, shoes
    - for home and for the beach, walking,
  • Toys and children's gadgets
    ,
  • Swimming suit
    and beach toys (inflatable ring, toys, armbands, ball),
  • Food
    , if necessary (baby food, treats, light snacks, regular fruits, thermos to maintain the temperature of baby food),
  • Personal hygiene products
    (toothpaste and brush, shampoos, towels, moisturizers).

If you and your baby are planning to travel to an unfamiliar place, be sure to find out before the trip where there are pharmacies and hospitals near your place of residence in case of force majeure.
To make children's things take up less space, use vacuum bags, but fold things with the fittings facing inward. If the child is very small, it is worth taking a stroller on the trip. For traveling, the best option would be a cane stroller. It is easy to fold and does not take up much space. Does your child use the potty? Be sure to take it with you; hotels are unlikely to offer you this accessory. But buying a new potty on the spot is not always the right decision, because often the baby gets used to his own and may completely refuse the new thing.

Ecotope children's suitcaseSamsonite rolling suitcaseSuitcase on 2 wheels EcotopeTextile suitcase Mr.Bag

How to fold your underwear compactly

For underwear, it is recommended to use clean bags. They are placed in a separate pocket or inside bundles of other clothes.

To fold your panties you need:

  1. Straighten them out. Fold the bottom to the waistband.
  2. Roll into a roller, starting from the sides.

Be sure to read:

How to remove iron marks from white, black or dark clothes

Bras should be stacked on top of each other, with the shoulder straps folded inside the cups. To maintain volume, folded panties are placed in them: this will provide additional protection.

You should not put bra cups inside each other: this will damage their frame.

Rating
( 1 rating, average 5 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]