How to properly iron a jacket or men's suit: step-by-step instructions

Home / Articles / How to iron a tie and a men’s suit so that the clothes look perfect?

15 Feb 2018

Category: Articles

No comments

A suit is an integral part of the wardrobe of a modern business person. In order for a set of things to best form the image of a person worth dealing with, all its elements must be impeccably ironed. The jacket, trousers and tie, as a rule, are not chosen from cheap fabrics. Therefore, without certain skills, it can sometimes be scary to touch all these things. Detailed instructions from this article will help you get rid of fears and teach you how to properly iron without the risk of ruining your suit.

Read in this article:

• Tips for ironing a tie
• Alternative ways to iron a tie
• How to iron a jacket easily?
• How to make creases on trousers?
• Some useful ironing tips

Morphemic analysis of the words “ironed” and “ironed”

Let’s find out what parts the word “ironed” consists of:

ironed

• “iron” – root;
• “en” – suffix;
• “oe” is the ending.

Let's include the root and suffix - “ironed” into the base.

The word “ironed” is made up of the following morphemes:

ironed

• “iron” – root;
• “enn” – suffix;
• “oe” is the ending.

The basis is “ironed”.

Let us point out that the analyzed lexemes have different suffixes “en” and “enn”.

How to properly iron jackets made from different fabrics

Before ironing your jacket, it is worth considering what material it is made of.

Wool is a rather delicate fabric. Direct contact with the iron may damage the fabric. For this reason, you can’t do without wet gauze:

1. Iron in the direction of the wool so that the pile does not fray.
2. You should not process one place for a long time.
3. The label says how much wool it contains. The larger the quantity, the lower the temperature required - 110-130 degrees.
4. You need to iron from the outside.

If linen products do not have a lining, you can iron them from the outside and inside. If the lining is sewn in, iron only from the front side. Temperature no more than 230 degrees. Use the steam function.

Small creases may remain - this is normal for linen.

Ironing synthetic items is not that difficult. Suits made from this material rarely wrinkle. Therefore, it is enough to iron the item several times. You can use a steamer.

For severely dented synthetics, set the temperature to 120 degrees. The fabric is easy to ruin, so don't forget about gauze. Do not press the iron too hard on the item. Wet the crumpled area with water and go over it with the tip of the iron.

Silk items should be ironed according to the following principle:

1. There is no need to use the steam function. Silk items are processed with a dry iron. To prevent streaks from appearing, it is better not to place wet gauze.
2. Temperature – 60-80 degrees. If you set it more, you can burn the silk.
3. Move along the shared thread - vertically.
4. If there is no lining in the jacket, you can iron it from the outside and inside.

If there is a print, you cannot do without gauze soaked in water. If there is no lining, iron the product from the inside. Temperature no more than 120-150 degrees. It is important to periodically clean the soleplate of your iron from scale. You don't need steam mode, a dry iron is enough.

It is not recommended to iron leather items. It is worth hanging the product on a hanger and leaving it for two or three days. You can also hang it over a container of boiling water for 15-20 minutes. If this method does not help, use a not very hot iron.

Cotton is quite resistant to high degrees. But such fabric can also be damaged. Before ironing, moisten not only the gauze piece, but also the jacket.

Corduroy items are ironed from the inside out, with a piece of soft fabric underneath. On the outside, iron in the direction of the pile. This way the fibers will not be disheveled.

When is it written “ironed”?

Example sentences

Let’s read the contexts in which the adjective “ironed” occurs to remember its spelling:

• It was important for Misha to have lunch on time and to wear something clean and ironed.
• To prevent ironed bedding from becoming wrinkled, you need to let it cool for twenty minutes.
• Nina Vasilievna quickly turned everything dirty into clean, wrinkled into ironed, torn into darned.
• Lena was given clean, ironed, lace underwear.
• The ironed blue dress looks better than the one my friend recommended.
• A hat, coat, cane, suitcase, and ironed linen fell to the floor.
• An ironed white towel lay on a shelf for special occasions.
• An ironed tights hung on a chair near the bed.

Preparing the jacket

Before ironing a jacket, it is worth preparing the workplace and the item for processing. It is important to make sure that the clothes can be ironed. Read the product label carefully.

If an iron is drawn that is crossed out, it is not advisable to iron the jacket. But at the same time it is possible to remove folds and creases. For this you will need a steamer.

Complete the preparatory stage correctly:

1. Make sure there is nothing in the pockets of your jacket.
2. If the clothing has stains or other dirt, you should wash the jacket before ironing.
3. A clean product is passed through with a special brush to remove lint, dust and pet hairs.
4. To remove wrinkles, hang the jacket over a bowl of boiling water and leave for ten or fifteen minutes. The creases will disappear.

To iron, you need to prepare everything you need:

1. Ironing board. Boards with an auxiliary platform are recommended. This makes ironing sleeves and hangers more comfortable and efficient. If you don't have a stand, use a small board. Wrap it in gauze or a piece of plain cloth.
2. Iron with different functions. Some fabrics may require certain settings. “Steaming” or “delicate ironing” may come in handy.
3. Gauze. You need a piece of clean and dry cloth 2-3 m long. Gauze will help you delicately iron the jacket.

To select the desired heating degree, look at the label. By the number of points it is possible to understand what the heating level will be:

• the only point is no more than 90-115 degrees;
• 2 points – temperature 120-140;
• 3 points – 160-200 degrees.

Irons come in different models.
Sometimes it is difficult to understand which mode needs to be set. To do this, you should carefully study the instructions for the device. To properly iron, you should follow several recommendations:

1. The process uses an ironing board or hard surface.
2. Take gauze and moisten it.
3. Use the steam function for certain jacket materials.
4. For hangers and sleeves, use a roller or a rag that is tightly twisted.
5. The back must be processed not only from the outside, but also from the inside.
6. The collar and lapels should be sprayed with water before ironing. Stretch the fabric well while processing.
7. If there is an image on the jacket, iron from the inside. To treat the outside, use a lining made of cardboard or a piece of fabric.
8. Glossy areas are treated with woolen cloth.
9. Products made from pile are ironed in the direction of the grain.
10. Do not touch metal or plastic buttons. These fasteners may melt or lose their saturation if ironed.
11. It is important to adhere to a certain order, which will help prevent the appearance of creases on already ironed parts.

Finally, hang the product on a trempel until it dries.

In what cases do they write “ironed”

Example sentences

Let’s read sentences with the participle “ironed” to understand the material:

How to iron a jacket: step-by-step instructions

Novice housewives are wondering how to iron a men's suit without damaging the fabric. Ironing order should be followed. The jacket should be ironed in the following order: pockets, sleeves, shoulders, back, collar, lapels.

Sleeves and shoulders are difficult to process. Therefore, iron the jacket on a damp cloth.

To make your shoulders even, use steaming. You should hang your clothes on a hanger and walk through the steam. Then dry well. If your home does not have such a device, follow these steps:

• hang the suit and manually align;
• set the iron to steam mode and move it 20 cm away from the item;
• pull clothes on with your hands and steam;
• dry.

You can also iron on a flat stand:

• Pull the shoulders onto the edge of the board and level it;
• iron with the tip of the iron;
• From the inside, go along the seams and corners.

The shoulders can be processed after the back and sides.

To iron sleeves, follow these instructions:

• Pull the sleeves alternately onto the additional board. Moisten the gauze. Cover the sleeves with material.
• Don't forget the seams at the shoulders and elbows.
• Iron the material in a circle to remove any unevenness. To protect buttons, use gauze with water.

Ironing the back is quite simple. The surface is straight, so it will not cause difficulties when ironing. You just have to take into account the material from which the clothes are made. Before ironing, place gauze. Then walk around the outside. Make movements from top to bottom.

Don't forget about the collar and lapels:

1. Iron from the face, placing damp gauze on top.
2. Press the material briefly with an iron.
3. Flatten the fabric by hand.
4. Pass the corners with the spout of the device.

Lapels should be ironed by pressing them against the shelves.

How to iron a jacket at home without an iron

It is possible to straighten a suit without an iron. This is done using a steam generator. Ironing will be easy and in a minimum amount of time. Thanks to the powerful steam flow, it is possible to smooth out any crease. The only drawback of such a device is its high cost. Therefore, not every person can afford to use a steam generator.

There are several other folk methods. Hang the dry item on hangers over a container of boiling water. Leave for 15-20 minutes. Then dry your clothes well. You can put it under a press to smooth out wrinkled areas as much as possible. Use books for heavy objects.

Vinegar is one option. Make a solution: Mix water, fabric softener and a little kitchen vinegar in a spray bottle. Apply a splash of liquid to the jacket and let it hang.

Ironing a suit correctly: how to make creases on trousers?

Trousers from a classic men's suit, as a rule, give the image of a business man a special gloss and neatness, thanks to the presence of arrows. Each trouser leg should have one single clear and even arrow. All men know a great way to iron trousers: they need to be folded correctly and placed under the mattress in a straightened state. After a night's sleep, it is expected to receive clothing suitable for use. But in practice, alas, things don’t go so smoothly. After overnight treatment, the item needs to be put in order in the traditional way, such as ironing a men's suit.

Sequencing:

The meaning of the word "ironed"

Source (printed version):

Dictionary of the Russian language: In 4 volumes / RAS, Institute of Linguistics.
research; Ed. A. P. Evgenieva. — 4th ed., erased. - M.: Rus. language; Polygraph resources, 1999; (electronic version):
Fundamental electronic library

GLAZED

, oh, oh.
Smooth from ironing, ironed. Basket with ironed linen.
Source:

“Explanatory Dictionary of the Russian Language” edited by D. N. Ushakov (1935-1940);
(electronic version):
Fundamental electronic library

Making the Word Map better together

Hello! My name is Lampobot, I am a computer program that helps you make Word Maps. I can count perfectly, but I still don’t understand very well how your world works. Help me figure it out!