Why water does not fill the toilet tank - possible reasons, solutions to the problem

Plumbing in every house or apartment plays a huge role in terms of comfort and convenience, and therefore the quality of life in general. Nowadays, the bathroom and toilet are the most technologically advanced rooms in the home, so not every person will be able to understand the intricacies and intricacies of the system. For example, many are interested in why water does not fill the toilet tank, what causes and breakdowns can lead to such a problem, and whether it is possible to deal with it yourself without calling a professional technician, whose services you will have to pay out of your own pocket.

Causes of problems with water intake

In a situation where water does not flow into the toilet tank, you need to pay attention to this problem and try to fix the breakdown as quickly as possible, otherwise the plumbing fixture can completely fail at any time and will need to be replaced.

In order not to pay money for the services of specialists or not to purchase new equipment, you can try to cope on your own with the fact that the toilet tank does not fill or it does not happen quickly enough. But first you need to find out why the breakdown occurred.

You should not immediately completely disassemble the device; you must first make sure that there is water in the water supply system. According to professionals, about 40% of water drainage problems occur due to the fact that it does not enter the device. First, you should find out whether there is a water supply in the house or riser, and only then look for the reasons why water is not filling the toilet tank.

When the system is full and the pressure in it is sufficient, but the device is not working, this indicates the presence of another type of breakdown. To be completely sure that everything is in order with the water supply, it would be best to talk about this topic with the neighbors living in the apartments above or below.

Problems with plumbing drainage occur when:

1. The float is in the wrong position. This malfunction causes water to poorly fill into the toilet tank. Sometimes the toilet tank leaks for this reason, which is very unpleasant. This should be checked first, since the float can block and leak fluid in different positions.
2. The water supply hose is clogged or damaged. Such malfunctions lead to a slow flow of water from the system, and sometimes to its complete shutdown.
3. Sand or grains of rust have accumulated in the place where the pipe connects to the device or in the filter. This circumstance may explain why water is drawn slowly into the toilet tank. Typically, blockages occur as a result of repairs to utility lines.
4. The exhaust valve is damaged, clogged or broken. This is one of the possible reasons for the occurrence of such a problem as water does not fill into the toilet tank.

Failure of plumbing equipment is caused by over-tightened structural fasteners - nuts, bolts and other elements. For this reason, you need to carefully check all connections, carefully turning them to make sure that everything is assembled securely and at the same time not overtightened.

It is necessary to make sure that there is no plaque or mucus on the plumbing components, since their presence may result in damage to the device.

Float misalignment repair

If the toilet does not fill with water at all, this is unlikely to happen as a result of the float being misaligned. But in the case when it enters the system, but not in the required volume, then the float should be checked for its correct location.

To do this, you need to open the lid - under it you will see water, with a mechanism located in it and a lever, at the end of which a special buoy is attached - a float. It is this part of the device that is responsible for drawing water to the required level, after which it closes the inlet valve. It also happens that the toilet leaks after flushing; this may also be due to the float.

In case of misalignment, it begins to prematurely interrupt the supply of liquid, which ends in the inoperability of the device. The displacer is carefully placed by hand into the required position - after this, the operation of the system should be restored.

Consequences of inaction

If the drain begins to make noise, extraneous sounds are heard during operation, the tank fills slowly or the inlet valve does not work well - this is a serious reason to take up the tool. There is no need to wait until the problem gets worse. A non-working toilet is one thing, but if the water starts to overflow, even the neighbors below can feel the consequences.

A decrease in the capacity of the hose, a clogged valve - all this will quickly lead to the fact that the toilet cannot be used. The result of inaction can be excessive water consumption, failure of an expensive device, and in some cases, a serious accident.

Clogged water supply valve to the toilet tank

When the toilet tank does not fill with water, despite the fact that it is present in the water supply, the cause of the breakdown may be a clogged inlet valve. This occurs as a result of the accumulation of debris, sand, rust and other contaminants, including plaque and mucus.

It is advisable that the blockage be removed in a timely manner - such problems should be dealt with by regular cleaning and rinsing of the mechanism. Timely prevention will ensure that a situation does not arise when the toilet does not fill the tank with water.

The breakdown is repaired in a certain sequence:

1. Turn off the liquid supply to the tank. Typically, houses and apartments have a common tap that can completely shut off the flow of water. It's being twisted.
2. The underwater hose attached to the tank is unscrewed and removed. It is necessary to proceed with extreme caution, since sediment from the water supply system can make the disconnection process difficult.
3. A visual inspection is carried out to find the place where the blockage has accumulated, after which it is cleared with a flexible steel wire.
4. Release the water supply tap slightly so that the remaining debris and dirt are washed out under pressure.

After the blockage has been cleared, in order to complete the process of eliminating the problem associated with the fact that the drain tank does not take in water, all that remains is to carefully twist the entire structure in the reverse order, not forgetting the need to carefully tighten all the nuts, but, most importantly, not pull them over.

Then check the level of water intake and, if necessary, adjust it using the bend of the lever and the location of the float.

Damage to the supply hose

If you need to find out why water is not filling the toilet, be sure to check the underwater hose through which the liquid moves into the tank. This is a reason that property owners also often complain about.

After some time, the manufacturing materials and components for plumbing fixtures may wear out and, as a result, fail, and then such a problem as water not flowing into the toilet cannot be avoided.

The hose is replaced as follows:

1. Depending on the design features of the water supply system, turn off the general water inlet valve to the housing or completely to the riser.
2. Unscrew the supply hose and inspect it. If, during a visual inspection, damage is found in the form of cracks or holes, then it needs to be replaced, otherwise the problem of why the toilet does not draw water into the tank cannot be solved.
3. When there are no visible imperfections on the hose, it is lowered into a previously prepared container and the general tap is slightly released. Leaks can be seen by the water that appears in them.
4. The underwater hose is replaced with a new one, and you can use this plumbing equipment.

Sometimes, if water does not flow into the toilet flush cistern, you have to change the tee-joint, but to do this, they shut off the water supply not only to the riser, but to the entire house.

Replacing faulty fittings

The algorithm of actions when replacing fittings will look like this:

When tightening the nuts of the inlet and outlet devices, be careful to tighten them to the average indentation of the rubber gasket. Otherwise, you can break the thread or vice versa - water leakage will appear from under the fasteners.

After assembling the drainage and water supply system, you need to check all connections for leaks, and then adjust, if necessary, the required water level in the tank.

Removing a blockage in the drain device

If the drain from which liquid pours into the toilet becomes clogged, problems also arise, but this does not affect the flow of water. It will enter the tank, raise the float to the required level, but the drain mechanism will not work.

Troubleshoot this way:

• remove the cover and disconnect the drain button;
• inspect the outlet valve from below, which opens when you press the water release button;
• If dirt is found, remove it by hand.

When the debris is not visually visible, the cause of the malfunction may be the tube connecting the tank to the plumbing. It should be remembered that mucus and plaque accumulate on the walls of the device and internal surfaces, which must be removed regularly.

Household chemicals, such as "Mole", for example, cope best with the cleaning task. They must be used with extreme caution and care, since the substances contained in their composition can harm the skin and mucous membranes of the respiratory tract. You must act in accordance with the attached instructions.

Other cases

Water may not be supplied well or may not be supplied at all under the following circumstances:

• The filter installed on the water supply pipe is clogged;
• The float does not float up well when taking in water. It is necessary to carefully check its movement while raising and lowering the float and eliminate any interference;
• bending of the supply hose. When tightening the nut on the inlet pipe, it is necessary to restrain the hose from turning so that it does not bend;
• the hole is clogged with sand. It is known that water contains various salts, limestone and other inclusions. And gradually the holes in the narrowed places become so clogged with these deposits that liquid is poorly collected;
• adjusting the intake mechanism. During assembly, the joints are sometimes made too tightly, and they affect the position of the valve and float, thereby restraining the flow of liquid. And also after the repair, the adjustment of the float mechanism was disrupted;
• peeling of rubber inside the hose. After prolonged use, the inner part of the hose swells, peels off, and the cross-section for water passage decreases.

Other cases of breakdowns when water does not fill the tank

There are other situations when water does not flow into the toilet tank. Sometimes, when installing plumbing fixtures, the parts are twisted too tightly together, for this reason they cannot perform their functions correctly. In this case, all components should be disassembled, cleaned and reassembled.

Experts recommend: to avoid problems with poor water flow into the toilet tank, take preventive measures at least twice a year and thereby maintain the mechanism in good working order for a long time.

It should be remembered: if you neglect such a problem for a long time that water does not fill well into the toilet, it still will not resolve itself, but will only worsen.

Postponing the repair of plumbing equipment for an indefinite period of time always results in serious problems, which cannot always be eliminated. As a result, both the tank and the toilet will need to be replaced, which will require considerable financial costs.

In addition to the fact that a faulty plumbing fixture makes living conditions in the apartment less comfortable, it can completely break down at the most unexpected moment and flood the neighbors. Therefore, if breakdowns are detected, they should be repaired as quickly as possible.

Perhaps the reason why the toilet does not fill with water is that the inlet valve was initially defective, but this became evident during operation, especially when the water supply is not of high quality.
In addition, plaque accumulates on the surface of both the valve and the drain mechanism, which prevents them from operating correctly. For a home craftsman who has never done plumbing work, without professional knowledge, it will be difficult to figure out why water is drawn into the toilet tank slowly or does not flow at all. Perhaps the best solution would be to call a plumber.