Carpet cleaner vanish active foam powerfoam


Tips for caring for carpets

With proper and regular care of any carpet, its service life can be significantly increased.
To do this you need to follow the rules:

  1. At least 2 times a week, vacuum up dust and small particles of dirt.
  2. Do not allow walking on carpeted surfaces in outdoor shoes.
  3. After washing the floors, let them dry then lay carpets and rugs.
  4. Periodically lift the floor covering and remove dust underneath it.
  5. Place rubber circles under furniture legs, if they are on carpet, to prevent dents.
  6. Any defects (holes, unraveling of weaving) should be immediately restored, darned, and sealed with suitable material.
  7. When wet cleaning, do not use water above 40 degrees, otherwise you can damage the pile and disrupt the structure of the material.
  8. Do not rub against the lint with brushes or rags.
  9. Do not use hard brushes for dry carpet cleaning.
  10. Remove spilled liquid and fresh dirt immediately, preventing them from penetrating deep into the pile.
  11. Before using any detergent or cleaning product, test it on an invisible area first.

Which Vanish to choose?

The manufacturer offers a line of “Vanish” products, which differ in shape and method of application. To clean the sofa and not harm its upholstery, you should choose the necessary product from this variety:

  • The shampoo is effective against old and persistent stains. Suitable not only for cleaning upholstered furniture, but also floor coverings.

  • Shampoo for a washing vacuum cleaner , the name of which indicates its method of use. Cleaning with this method minimizes operating time and significantly enhances the cleaning effect.

  • Antibacterial shampoo is used for manual cleaning only.
    With its help you can remove dirt, unpleasant odors, and mustiness. This product effectively kills pathogens.
  • The powder is used when it is necessary to clean using the dry method, without using water.
    It does not require preliminary dilution or moistening of the upholstery of upholstered furniture. The procedure will require a powder with a brush or a vacuum cleaner. This product should not be used to clean delicate fabrics.
  • A stain remover in the form of a spray is used to locally clean the fabric. It quickly removes fresh stains.

Do not wipe wooden and metal finishing elements with Vanish.

How to use the product so that there are no streaks left?

To make the cleaning process effective, use the general recommendations for the selected product:


  1. The shampoo is diluted with water at room temperature in a ratio of 1 to 9 .
    The product is whipped into a foam and applied to the upholstery using a sponge, avoiding getting too wet. If the contamination is fresh, then the composition is applied and left to act for 10 minutes. If it is necessary to clean the entire surface of the sofa, Vanish is left for 7 hours.

    With heavily ingrained dirt, this time increases to a day. Then all that remains is to vacuum up the dirt.

  2. Vanish spray does not require preliminary preparation . Shake the container, turn the cap, spray the product onto the problem area. Rub the spray into the surface of the sofa with a sponge. After 5 minutes, remove dirt and any remaining spray with a soft cloth.
  3. The powder is applied in an even layer to the surface and rubbed into the upholstery of the sofa with a brush. The product is left to act for half an hour. After which it is removed along with the dirt with a vacuum cleaner.

Do not use Vanish to clean furniture with bright upholstery. Any product in this line consists of oxygen-containing bleach, which, together with the stain, is capable of removing the dye from the treated area.

What to do if the remedy did not help?

Judging by customer reviews, Vanish for carpets has not helped everyone. And this is not surprising, because sometimes even professional dry cleaning cannot cope with stains that they have already tried to remove on their own.

Therefore, before you start treating the emerging contaminants, you should weigh the pros and cons, and then make the right decision.

Cleaning industry experts do not recommend starting cleaning yourself if:

  • old stains and unknown location;
  • there are old and heavily greasy places;
  • There are places where pets constantly defecate.

In such cases, special equipment, professional detergents and stain removers are used.

What is Vanish for carpets?

For manual carpet cleaning, Vanish is produced in three forms: powder, shampoo and spray. Proper use will allow you to achieve the desired result.

11 rules for using Vanish shampoo for carpets.

  1. Ventilate the room well.
  2. Don't forget to wear gloves when you start cleaning. The composition includes potent substances, so you need to protect your skin from their effects.
  3. Follow the dosage. One cap of shampoo should be diluted in nine caps of water.
  4. Shake the shampoo well to form a thick foam. Use a sponge to whisk.
  5. Use water at a comfortable temperature.
  6. Do not rub in foam. Want to know how shampoo is used? With Vanish for carpet cleaning, the application methods do not require any effort from you.
  7. Remove any remaining foam using a vacuum cleaner.
  8. Wipe the surface with a damp brush after vacuuming.
  9. Wait for the carpet to dry. Do not use it for two to three hours after cleaning.
  10. Do not use shampoo on handmade carpets. Vanish for carpets instructions warn that the shampoo should be used carefully on delicate fabrics.
  11. Remember how to properly clean your carpet. Wet the surface moderately. This will help avoid stains.

Removing stains

Despite the fact that Vanish is a universal solution for removing stains from a sofa, in different cases you should use different types:


  1. Wine stains require an application of shampoo foam, left for 10 minutes, followed by sponging.

  2. Grease stains are removed with a spray or powder mixture applied for 5 minutes.
    To remove old greasy stains, it is better to use an antibacterial shampoo.
  3. Milk stains are removed with antibacterial shampoo using a washing vacuum cleaner.
  4. Coffee stains can be removed with Vanish shampoo, whipped into foam, applied for a few minutes and treated with a soft cloth.
  5. Ballpoint pen stains can be removed with a spray.
  6. Blood stains are removed with powder applied in the form of a paste.

It is better to apply Vanish on fresh spots. In this case, the contamination does not penetrate deeply and does not require mechanical effort.

About “Vanish”

  • Vanish

The action of this line of household chemicals is based on the ability of reactive oxygen species to push dirt particles onto the surface of the product, even from hard-to-reach places. The advantages of Vanish are:

  • careful attitude to the structure of the fabric;
  • maintaining bright colors without blurring;
  • preventing yellowish staining of white pile;
  • Possibility of use for carpets with different lengths of the pile part.

The Vanish brand includes several products designed for cleaning carpets:

  1. Shampoos for manual cleaning, for use in washing vacuum cleaners and with an antibacterial effect.
  2. Active foam that removes old, persistent stains.
  3. Powder for dry cleaning of carpets using a vacuum cleaner.
  4. Spray stain remover for carpets.

Before you start cleaning, you should carefully read the instructions for the purchased product, since its different options have their own characteristics and subtleties of use.

Types and composition of the product

The brand's line is represented by a variety of products intended for washing, stain removal, bleaching, carpet and furniture cleaning. Each of the products has a different composition and special properties aimed at the problem for which they are designed.

Powder

Vanish powder mixture includes:

  • oxygen bleach;
  • zeolites;
  • nonionic and anionic surfactants.

These mixtures are designed to remove stains from colored and white clothing. Sold in convenient jars. The set also includes a measuring spoon that allows you to accurately measure the required amount of substance.

Similar products are known under the “Vanish Gold” series and include 2 types: for colored and white linen. They are suitable for use on colored and white fabrics. They begin to act 30 seconds after application. Similar products are presented in dosage:

  • 90 g;
  • 250 g;
  • 500 g;
  • 1000 g

The cost of the product varies from 100 to 630 rubles. depending on the weight of the package.

Liquid Vanish

Liquid Vanish is the most popular stain remover. It includes:

  • citronellol;
  • phosphates;
  • d-limonene;
  • anionic surfactants;
  • cinnamal.

In addition, the composition contains active oxygen, which helps speed up the stain removal process. The product, in turn, does not contain chlorine, so it will not harm your things in any way. Suitable for delicate, silk and wool materials.

The range of liquid Vanish is represented by two products. One of them is designed to remove stains from colored and white fabrics. Another type of liquid Vanish contains whitening components. Suitable for all types of white fabrics. Works even in cold water. The variety of packaging is represented by volume:

  • 450 ml;
  • 1 l;
  • 2 l;
  • 3 l.

The cost of the product varies from 150 to 700 rubles.

Gel Vanish

Vanish gel stain removers have a similar composition to liquid products, except that their formula is thicker. This innovation allows the substance to deal with stains even faster. Gels are produced under the Vanish Gold series. Presented by 2 products:

  • Stain remover. Actively affects stains of various types on all types of fabrics. Due to the gel base it is used more economically.
  • Bleach. Contains additional components, therefore suitable for white materials.

Available in 450 ml and 1 liter bottles, costing 250 rubles. and 550 rub. respectively.

Foam

Vanish products in the form of sprays are intended for pre-treatment of stubborn stains. Does not contain phosphates and chlorine. Suitable for processing both colored and white materials. Requires more consumption compared to other Vanish products, therefore it is used sparingly. However, such packaging prevents contact of the substance with the skin, which for many is one of the main advantages.

Assortment of the Vanish spray line.

NamePropertiesVolumePrice
For pre-treatment of stains.Designed to pre-remove stubborn stains before the main wash.500 ml550 ₽
Intelligence for colored linen.Removes stubborn stains, preserves the structure and color of the fibers.500 ml450 ₽
Spray for carpets and upholstery.Copes with stains on carpets, rugs, and upholstery.500 ml440 ₽
Foam for carpets.Suitable for cleaning carpets, upholstery, home textiles.582 g400 ₽

For washing vacuum cleaners

Special Vanish shampoo for washing vacuum cleaners does an excellent job of cleaning carpets, rugs, and upholstery. Strengthens the effect of standard vacuum cleaning by 5 times. The gel-like product is mixed with water and poured into the dispenser of the device. After this, carpets and furniture are thoroughly processed.

The approximate cost of a 450 ml package is 300 rubles.

For floors, carpets, furniture

Vanish's range of carpet and furniture cleaning products includes several product options. Each substance actively affects stubborn stains and removes them with ease. Using Vanish makes carpet cleaning 5 times easier and also removes animal hair. After treatment, the coatings become softer and brighter.

Assortment of funds.

NameVolumePrice
Vanish Shampoo for manual carpet cleaning Gold
  • 500 ml;
  • 100 ml
  • 250 rub.;
  • 95 rub.
Vanish Stain remover for carpets and upholstery Gold500 ml400 rub.
Vanish Moisturized Carpet Cleaning Powder650 g650 rub.
Vanish Shampoo for manual carpet cleaning antibacterial Gold450 ml250 rub.
Vanish Spray Stain remover for carpets and upholstery500 ml320 rub.

How to use Vanish for carpets

Before you start cleaning the carpet, you need to remove dry debris and accumulated dust from it. The best thing to do is take it outside and knock it out. If this is not possible, you should thoroughly vacuum both the front and back sides so that contamination during cleaning does not leave dirty spots on the floor.

Carpets are made from different materials. It is better not to clean items that are handmade and/or made from natural threads, such as wool or silk. Inexpensive synthetic carpets can be treated with unstable dyes, so before using Vanish, you should test the material's reaction on an inconspicuous area. If the color has withstood the treatment, you can safely apply the product to the entire product.

When working with Vanish at home, as with other household chemicals, it is important to follow safety precautions - wear rubber gloves and ventilate the room during and after using the product

Heavy soiling and difficult stains are best removed from the carpet surface as quickly as possible. In this case, Vanish is most effective.


  • How to clean a carpet with baking soda and vinegar: effectively and safely

Shampoo

Shampoo for manual cleaning of carpets and shampoo with an antibacterial effect are designed for wet cleaning of stubborn dirt and dust, and eliminating odors. The latter is capable of destroying up to 99.9% of bacteria and microorganisms (according to the manufacturer), that is, it can be used to disinfect the coating. Mothers whose young children often play on the carpet will especially appreciate this property. The shampoo is convenient for treating carpets with both short and long pile.


Vanish shampoo for manual carpet cleaning effectively removes stubborn stains

The sequence of actions when using “Vanish” for carpets in the form of shampoo:

  • dilute the product in cool water in a ratio of 1:9;
  • beat the solution until a rich foam forms using a sponge;
  • apply foam to the surface of the carpet using the same sponge, but there is no need to additionally wet the surface with water;
  • remove remaining foam after complete drying with a regular vacuum cleaner.

Please note that a washing vacuum cleaner cannot be used to remove foam; there is a special product for it - shampoo for washing vacuum cleaners. According to the instructions for use, this shampoo is diluted in water at the rate of one and a half caps of shampoo per 1 liter of water and added to the compartment of the washing vacuum cleaner.

The carpet is cleaned first with the use of the product, and then again without it (performing dry cleaning)

According to the instructions for use, this shampoo is diluted in water at the rate of one and a half caps of shampoo per 1 liter of water and added to the compartment of the washing vacuum cleaner. The carpet is cleaned first with the use of the product, and then again without it (performing dry cleaning).

Carpet cleaning using Vanish is much more effective than regular water cleaning. For those who want to try alternative methods, we recommend reading our article: “How to effectively clean a carpet at home.”

Spray

Vanish spray is intended for local removal of stains on the carpet, including difficult to remove stains. It is better to use it on fresh stains. The product comes with a spray bottle, which makes it easy to use. You can also use the spray to remove stains from the upholstery of a sofa and other furniture.

How to use the spray:

  • spray onto the stain and leave for 5 minutes;
  • in case of heavy or difficult to remove contamination, rub the liquid in with a brush with medium-hard bristles (this way the active substances penetrate deeper into the material);
  • remove with a clean damp cloth after 5 minutes.

Powder

Moistened Vanish powder is indispensable when cleaning large carpets. Thanks to its absorbent properties, the product actively absorbs dirt and unpleasant odors, restoring freshness and cleanliness to the coating.

Instructions for using the powder:

shake the powder package before use; Pour the powder onto the carpet and spread it with a soft brush over the entire surface. Since the powder is moistened, there is no need to add additional water to it or wet the carpet; leave the product until completely dry (20-30 minutes); remove powder using a regular vacuum cleaner

It is important to collect all the grains, so it is better to vacuum the coating several times.


Vanish powder is suitable for cleaning large carpets

Active foam

Active foam, like shampoo, is used to remove stubborn dirt and dust, as well as to refresh the carpet. But unlike shampoo, “Vanish” foam is more convenient to use - you just need to spray it onto the surface of the carpet from a distance of 70-90 cm.

The foam is spread evenly over the carpet in a dense layer and left on the surface until completely dry (this may take several hours). Then the remaining foam is removed with a regular vacuum cleaner.

Dry carpet cleaning powder

The difference between this product lies in the structure and content of elements that can absorb and bring to the surface of the carpet particles of contaminants located inside the coating.

The powder is easy to use. It is used dry, without adding water .

To clean a carpet, use a brush to rub the powder into the surface of the carpet. After a few minutes, the surface must be thoroughly vacuumed until the powder particles are completely removed.

This method is used if wet cleaning of the carpet is undesirable.

Please note that you should not use the powder on long-pile carpets. This will make it difficult to remove the powder after cleaning.

According to housewives, this type of cleaning is quick and efficient . There is no need to take carpets to dry cleaning.

Methods of application

To choose the most suitable method of using Vanish liquid powder, you must accurately determine the contaminated material, as well as its structure. Clothes can be washed in any convenient way or soaked. And stains on different types of carpets are removed using different methods and with different dosages of a suitable product.

Stains on clothes

In case of severe or difficult to remove contamination, additional soaking is required, which allows the active substance to penetrate deep into the fabric structure. If the contamination is strong enough, then washing in a washing machine is necessary. Sometimes the contamination is removed the second or third time.

Carpets

Using liquid powder, you can treat even large carpets or rugs. This product copes well even with old and very complex stains, but is most suitable for synthetic rather than natural materials.

Before starting the cleaning process, it is necessary to carry out preparatory work:

  1. Vacuum the carpet to remove large particles of debris
  2. Collect trash under the carpet. Do not forget about this point; under any carpet, a large amount of dirt and dust collects, which no cleaning agent can pull up
  3. Vanish is applied to the contaminated area using a medium-thick bristle brush, rubbed in in a circular motion and left for the time required according to the instructions.

Top 3 analogues: how to use them, what is the price?

Vanish remains the undoubted leader in the household products market. But besides this manufacturer, there are a large number of alternative products in different price categories.

Shampoo 5+

A leading product in its category. The product of a domestic manufacturer is used both concentrated and diluted. Cost: 120 rubles per 500 ml.

Consumers highlighted the following positive characteristics:

  • easily dissolves;
  • effectively removes unpleasant odors;
  • easily copes with dust and dirt;
  • has antistatic properties;
  • Can be used in washing vacuum cleaners.

HELP

An affordable option that will not only save your budget, but will also perfectly remove difficult stains. Used as a stain remover: applied to the contaminated area, washed off with water using a foam sponge. Cost 75 rubles per 500 ml.

Product advantages:

  • Available in aerosol form;
  • eliminates difficult stains;
  • copes well with odors.

Minuses:

  • acrid odor;
  • Not suitable for general cleaning, only as a stain remover.

Amway Cleaner

Concentrated cleaner from Amway is an environmentally friendly product that can easily clean any floor coverings and upholstery fabrics. Cost from 600 rubles per 1 liter.

Pros:

  • quality meets European standards;
  • effective in combating stubborn stains and various odors;
  • Suitable for all types of carpets.

Cons: high cost.

Recommendations for carpet care

To ensure that the rug always looks great and that cleaning it does not cause problems, you should adhere to the following recommendations:

Vacuum the product twice a week. Once a month it is recommended to do preventative cleaning of the coating with Vanish. It is better to use the cleaner as soon as stains appear. Old stains are more difficult to remove and require maximum effort. Before using Vanish for the first time, you need to check how the material reacts to the product. To do this, apply it to a small area and see the reaction.

If the pile has not changed, you can safely use a cleaning gel. Vanish should be used with caution if anyone close to you is allergic to household chemicals. Sometimes residual product in the pile after cleaning a carpet product can lead to an undesirable reaction in the body. If it was not possible to eliminate stains on the carpet, you can take it to specialists

Dry cleaning will remove even old stains and restore the carpet to its original appearance.

You should know that, despite the different forms of Vanish for carpets, the instructions for use and composition are almost the same. The combination of active ingredients makes it possible to remove even the most stubborn stains, and proper preparation and actions according to the instructions help to achieve excellent results.

Rules for using funds

Even before purchasing, it is important to carefully read the description and understand whether the product will suit your carpet. For example, concentrated foam cannot be used for viscose and wool products

For painted and synthetic carpets, it is necessary to carry out a test before use - apply a small amount of the product to a small, inconspicuous fragment of the carpet. Testing ahead of time will ensure that the paint will not react with the detergent.


Each form of this drug requires compliance with a specific algorithm for use.

All products that require drying indicate that you can walk on the carpet, but do not go barefoot. To prevent the active components from causing irritation to the skin of your hands, you should wear gloves when working with Vanish. If you are susceptible to allergic reactions, then in addition to gloves you will need a medical mask or a disposable respirator - this is a measure to protect against the product getting into the respiratory tract.


When cleaning carpet, be sure to use gloves.

If children live in the house, then it is better not to let them into the room while the carpet is being treated. Chemical components in the composition of the products can cause an allergic reaction; if any household chemicals come into contact with children's skin, irritation may occur.


If there are children and animals at home, they should be kept away from the room in which the carpet is being cleaned.

The same safety measures should be observed for domestic animals; a safe concentration of chemical components for humans will pose a danger to the animal. Children and animals can be allowed into the room immediately after the treatment is completed.


Clean carpet at home in a well-ventilated area.

Advantages of Vanish for carpets and composition

The main task of the Vanish cleaning product is to gently clean surfaces with any size of pile, eliminate bacteria and germs, and remove stains. Using a vacuum cleaner with a washing function will greatly facilitate this process, but the composition is also effective for manual cleaning. Vanish can also be used for manual cleaning of not only carpets, but also upholstered furniture.

Composition of the product:

  1. Enzymes. Break down protein compounds.
  2. Zeolites. Dissolve fats that do not break down when exposed to ordinary water and soapy water.
  3. Active oxygen. To obtain the effect of forming active oxygen, Vanish contains sodium percarbonate and hydrogen peroxide.
  4. Non-ionic surfactants. Dissolve fat, regardless of the composition of the water. Removes stains of any origin from the carpet surface and eliminates unpleasant odors.
  5. Anionic surfactants. Promotes the formation of thick foam that cleanses stains of any origin. Particularly effective when cleaning upholstered furniture.
  6. Flavorings and disinfectants. They help the coordinated work of the remaining components in Vanish.

Household helpers

A variety of household chemicals and detergents will require a careful approach to their selection

If the carpet cleaning product will be used in an apartment, then all precautions should be taken so as not to harm people’s health. How to use Vanish for carpets, how safe is this product? Before the procedure, the carpet should be cleaned with a vacuum cleaner.

You can use a damp brush to remove large debris, hair or pet hair. Next, the carpet needs to be dried if it is wet. We prepare “Vanish” for carpets.


Application is simple. Add the required amount of product to a bowl of warm water. Using a foam sponge, create a rich foam. Apply the resulting dense foam without water to the surface of the carpet. After some time, the foam will settle and dry. Now is the time to vacuum the carpet. To avoid walking barefoot and breathing in the vapors of the remaining solution, it is advisable to treat the carpet again with a wet brush and remove the remaining product.

Features for different types of coating

Fabric

Any upholstered furniture should be cleaned without direct contact with water and detergent. For the procedure, prepare a cloth that absorbs moisture well:


  • Dilute the detergent according to the instructions.

  • Lather Vanish.
  • Apply foam to the contaminated area.
  • Blot the foam with a sponge.
  • Give Vanish time to work on stubborn dirt.
  • Remove any excess with a paper towel.
  • If necessary and the fabric allows, clean the dirt with a brush.
  • Wipe the sofa with a microfiber cloth until completely dry.
  • Drying is done naturally, without resorting to a fan or hair dryer. You can speed up the process by opening windows.

Before cleaning a sofa with fabric upholstery, apply detergent to a microfiber cloth and apply it to an inconspicuous area of ​​the surface to test the effect of Vanish on the upholstery.

Genuine leather and its substitute

Such furniture is washed with special cloths for natural leather and a washing vacuum cleaner with diluted Vanish. The procedure is carried out in a gentle manner so as not to damage the surface or leave scratches on it.

To clean old, greasy stains, it is better to use a steam cleaner, which, under its pressure, removes even stubborn dirt. Its nozzle penetrates into hard-to-reach places.

Step by step steps:


  1. Remove trash from the couch.

  2. Clean the furniture with a vacuum cleaner, going over its surface and joints with a special nozzle.
  3. Mix 1.5 caps of Vanish for vacuum cleaners with 1 liter of water at room temperature.
  4. Fill the reservoir of your steam cleaner or vacuum cleaner with the diluted solution.
  5. Apply the diluted product to the most problematic areas.
  6. After 5 minutes, start using a steam cleaner or vacuum cleaner.
  7. After the surface of the sofa is dry, go over it with a vacuum cleaner to remove any residual detergent and dirt.

Cleaning leather furniture with a steam cleaner should not be done more than once a year.

Furniture made of genuine leather or eco-leather should be cleaned carefully, without turning on the device at full power, so as not to harm the delicate material.

After cleaning, to give the sofa a shine, you can treat its surface with cosmetic Vaseline.

If there is no washing vacuum cleaner or steam generator, then the application instructions are standard:

  • Apply Vanish to the surface (it is better to use a spray).
  • Hold for 5-7 minutes.
  • Wipe very thoroughly with a damp cloth.

Suede


Suede sofas should be cleaned with a special sponge or brush for suede products . Cleaning is done with delicate movements, avoiding damage to the upholstery.

Treatment with a vacuum cleaner with a lint attachment is allowed. For local cleansing, you can use Vanish spray.

After applying the product, immediately begin to remove dirt in a circular motion, without allowing the upholstery to become heavily saturated with the spray.

Made from velor

to clean a velor sofa by hand so as not to spoil the fabric . Cleaning with a vacuum cleaner is only possible when using a rubber nozzle, moving along the pile, otherwise it may become wrinkled.

Vanish can be used for vacuum cleaners. Manual cleaning is carried out with shampoo or spray to locally remove stains.

A microfiber cloth should be moistened in the prepared solution and squeezed out. Clean the fabric with gentle movements in the direction of the pile.

After the fibers have dried, you need to steam the velor using an iron.

Vanish antibacterial for manual carpet cleaning

A product with an antibacterial effect is recommended to be used to combat severe stains. In addition to dirt, it helps remove foreign odors, and also allows you to disinfect the surface. Often used to treat carpets with piles of different lengths.

Before application, the shampoo is diluted with warm water. For one part of it you should take 9 parts of water. A thick, strong foam is whipped, which is then distributed over the contaminated areas of the floor covering. No additional wetting is required. Only in case of severe contamination can a little concentrated product be applied to the stain and foam on top. Leave it on the surface to dry. Then collect the remains using a vacuum cleaner.

Using Vanish to clean upholstered furniture and carpets

The following products from the manufacturer's line are excellent for furniture. The advantages include ease of correct use for upholstery of sofas and carpets, safety for people and pets, quick and effective removal of various contaminants. The following products are suitable for cleaning upholstered furniture and carpets:

  1. Shampoo. Used for cleaning and removing stains from carpet and other carpets, sofas and armchairs. Able to deal with old food stains. To remove a fresh stain, apply shampoo directly to the stain and leave for 20 minutes. Then the product is removed with a damp cloth. To clean the entire surface, the shampoo is diluted in water in a ratio of 1:9, i.e. For 900 ml of water, take 100 ml of shampoo. Then the solution must be whipped into a strong foam and applied to the surface of the carpet or upholstered furniture. Leave the foam until completely dry, then clean it with a vacuum cleaner. Available in containers of 750 and 450 ml.
  2. Shampoo for vacuum cleaners with washing function. With this product you can remove stubborn stains from furniture upholstery and soft floor coverings in a short time. To do this, pour a 10% aqueous solution of “Vanisha” into the container of the washing vacuum cleaner. The contaminated surface is treated with this solution. Then you should pour clean water into the vacuum cleaner container and walk over the furniture or carpet again. Since in this case there is no need to wait for the foam to dry, all cleaning takes much less time. Available in containers of 750 and 450 ml.
  3. Antibacterial shampoo. It differs from previous products in that components with an antibacterial effect are added to the composition. Well suited for treating sofas, kitchen corners, armchairs and carpets in homes with small children and animals.
  4. The powder is intended for soft surfaces that cannot tolerate wet processing. The product is able to penetrate deeply into the pile and dissolve many types of contaminants. The product is produced in a volume of 600 g.
  5. Spray for cleaning upholstered furniture. Used for local removal of stains from food, tea, coffee, sauces, cosmetics, etc. It is not recommended to use for removing stains from silk, velvet and other upholstery that cannot tolerate wet treatment. Sold in a 0.5 liter bottle.
  6. Active foam is suitable for removing stains and dirt from the surface of upholstered furniture and carpets. Before use, shake the container with the product several times and spray the product onto the surface to be cleaned. Particularly noticeable stains can be rubbed with a sponge or cloth. Leave the product for several hours until it dries. Then vacuum the surface to be treated.

Before first use, be sure to check the color fastness of the carpet or furniture upholstery to Vanish.

Rating
( 1 rating, average 4 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]