Detailed instructions for using “Vanisha” for carpets, composition of the product, its price, analogues and customer reviews

Vanish stain remover is able to cope with fresh and old stains of various natures. It is used to clean carpets with stubborn paint.

In order to prevent unpleasant consequences that Vanish can cause for carpets, the instructions for use must be carefully studied and followed with precision.

Vanish for flooring

Types of pollution

It would seem that you can vacuum the carpet and it is clean again. But actually it is not. Small particles of dust, sand, and dirt can become deeply embedded in the fibers if you do not regularly care for the carpet.

Contamination on the carpet can vary from street dust to coffee spilled on it. Each type of pollution must be dealt with differently. And most importantly, when using chemicals, do not harm the structure of the fibers. If the carpet has fairly serious stains, you can take it to the dry cleaner.

The assortment in the departments of household chemicals is replete with products to combat various contaminants. And for carpets - this is a separate issue, there are simply a huge number of them. But the most popular and in demand product is Vanish for carpets. The advantage is not only that it is low cost, but also that it is quite effective. There are also plenty of analogues of this product, but they are not as effective as the original.

Dry cleansing powder

This product is convenient for cleaning products made from natural fibers - wool and viscose, and other products that are not desirable to get wet. Dry cleaning powder is suitable for thick, massive coatings that are difficult to dry; the same product is used as a means for caring for upholstery of upholstered furniture.

Vanish powder can be used not only for washing, but also for cleaning carpets.

Wet dry cleansing powder does not need to be diluted; it is a ready-to-use product. Shake the box, then distribute the powder evenly over the surface, rubbing in with a brush. Next, you need to let the product dry on the carpet. If you open the windows, it will take about half an hour. Make sure the wet powder is dry and vacuum the surface.

The powder is left to act for 30 minutes, after which the carpet must be vacuumed.

The wet powder for dry processing contains special abrasive substances that capture particles of contaminants. The instructions for Vanish for dry cleaning carpets indicate that it removes five times more dirt than a regular vacuum cleaner.

Vanish products

Vanish is a universal cleaner that can remove almost any stain.

Advantages and composition of the product

Many household chemicals contain chlorine. It can damage the fiber structure of the product and change its color. Vanish for carpets does not contain chlorine! And this is the main advantage of the product. The effectiveness of Vanish is achieved due to the components it contains:

• oxygen bleach;
• organic substances with different refreshing aromas;
• anionic surfactants;
• nonionic;
• enzymes;
• zeolites;
• disinfectants;
• polycarboxylates.

Also, the advantages of Vanish for carpets include fast and effective stain removal. When applying the product to the stained area, you can immediately notice the first effect - the stain practically disappears before your eyes.

Action of Vanish

All components included in the product have a comprehensive effect on pollution. Vanish has antibacterial, bleaching and hypoallergenic properties, so it can be used to treat carpeting in homes with children.

Variety of Vanish products and their scope of application

In the departments of household chemicals there are 4 types of Vanish carpet cleaning products:

• Shampoo.
• Spray stain remover.
• Powder.
• Active foam for carpet cleaning.

Important! Vanish is considered an aggressive agent, so it should only be used on artificial materials. Products made from natural materials should not be cleaned with it; you can make an exception by using foam, but it is also not suitable for all types of materials.

Instructions for use are written on the packaging of each product; they must be strictly followed, otherwise the carpet may be damaged.

Vanish Gold shampoo for carpets

Instructions for using Vanish shampoo for carpets:

• Dirt and dust should be removed first.
• Dilute the product in water in the proportion indicated on the package.
• Beat the solution until foamy.
• Apply it to the surface and wait until it dries completely.
• Remove any remaining product with a vacuum cleaner.

Spray

Vanish Spray effectively removes small stains that have not yet become embedded in the fibers of the material. Instructions for use:

• Clean the carpet of debris and moisten stains with water.
• Spray the spray onto the dirt and after 5 minutes, remove the remaining product using a paper napkin.

Powder

Using Vanish in the form of a moistened powder, you can process fairly large products. The powder penetrates deep into the pile and removes even the most difficult stains. How to wash a carpet using powder:

• First you need to clean it of debris and dust.
• Shake the package with the product (the instructions say how to do this).
• Using a brush, apply the powder to the entire surface of the carpet.
• Remove remaining powder with a vacuum cleaner.

Active foam

The product is popular due to its simple method of use and fast and effective action. But this type of Vanish for carpets is difficult to find; it is not available in all departments of household chemicals. Application:

• Before treatment, you need to prepare and clean the carpet from dust.
• Shake the can and spray onto the carpet pile, distributing evenly over the entire surface.
• Wait several hours until completely dry (2-3 hours).
• Remove any remaining foam using a vacuum cleaner.

Rules for cleaning the Vanish sofa

Stain removers from Vanish are popular due to their safe ingredients, lack of chlorine in the composition and economical consumption. Before you start cleaning the sofa with any product from the Vanish line, you should find out its purpose and nuances of use.

Antibacterial gel

In addition to cleansing the sofa from grease and stubborn dirt, the product actively removes odors and eliminates pathogenic microorganisms in the upholstery of upholstered furniture. The gel is used in the same way as shampoo.

Powder

It is used to gently dry clean a sofa with cotton upholstery in the presence of individual greasy stains. The powder is scattered over the dirty surface and rubbed into the fabric covering. After half an hour, treat the area with a vacuum cleaner. The dry method will not help to cope with old or complex stains, but it is ideal for systematic preventive cleaning of dust and recently appeared stains.

Vanish shampoo for manual cleaning

Serves to remove old and stubborn stains. First, make a solution of 1 part shampoo and 9 parts warm (+40 ° C) water. Whip the liquid until foamy. Foam is carefully applied to the covering, without rubbing it into the fabric, and left for 30-40 minutes. After this time, the treated area is vacuumed to remove traces of shampoo.

Spray

Convenient for quick superficial removal of fresh traces of food, tea, and cosmetics. Before using the spray, shake the bottle and then spray the product in a thin layer. After 5 minutes, wipe the dampened area dry with a clean cloth, then vacuum it.

Safety precautions

All household chemicals contain components that can cause an allergic reaction or irritation to the skin. Vanish is no exception. Before using any cleaning product, even if the packaging says it is completely hypoallergenic, you should use rubber gloves. It would also be a good idea to wear a protective mask or respirator.

We recommend:

How to update a leather jacket at home

If there are small children and pets in the house, they should not be allowed into the room during treatment.

Preliminary processing

Before applying detergent, you need to clean the carpet from dust and debris. You can take it outside and knock it out, or just use a vacuum cleaner.

Note! You need to vacuum not only the front side of the carpet, but also the back side. This way you can avoid the formation of dirty spots on the floor during cleaning.

Before starting, it is also necessary to check the reaction of the material to the product. This can be done on an inconspicuous area of ​​the carpet - apply and wait a few minutes. If no changes have occurred in the color or structure of the fiber, then processing can begin.

Proper carpet care

After cleaning the carpet, you need to properly care for it so that you don’t spend a lot of time and effort on it during the next general cleaning. Proper care will help extend its service life and maintain its original appearance for a long time. Here are some tips for caring for your carpet after cleaning:

• To prevent the carpet from getting dirty quickly, you need to vacuum it at least 2 times a week.
• Before each use of the product, it is necessary to check its reaction to fabric fibers. This can be done on an inconspicuous area of ​​the carpet.
• Any detergent will be more effective if used immediately after a stain appears on the carpet.
• There is no need to walk on the carpet while treating it. This may reduce the effectiveness of cleaning.
• When using a vacuum cleaner, you need to clean not only the front side of the carpet, but also the back side. And most importantly, you should not turn on the vacuum cleaner at full power.
• You also need to beat the carpet by hand. It is recommended to do this at least once a year.
• From time to time it is also recommended to turn the carpet 90 and 180 degrees so that the pile does not wear off in those places where people walk the most.

Methods for removing various stains on carpets

In addition to various cleaning methods, which must be carried out regularly, there are ways to remove different types of stains. If a child smears plasticine on the carpet, guests spill wine, or your beloved dog puts meat juice, you need to act immediately:

• Fruit stains can be removed by a mixture of laundry soap and apple cider vinegar in proportions 1:1 and diluted in 1 liter of water. The product is applied to the stain, gently rubbed in, and then removed with clean water.
• Coffee stains can be removed with dishwashing liquid. Fresh stains should be slightly wetted, add a couple of drops of gel, rub and rinse with water. Hydrogen peroxide and even beer cope well with this task.
• Glycerin will help remove long-standing traces of coffee. It is applied to the stain and left overnight, and washed off in the morning with a detergent solution.
• Grease stains are removed efficiently with a mixture of salt and alcohol (1:4). The product is rubbed several times in the direction of the pile. Not so quickly, but it is possible to remove traces of fat with chalk with talcum powder, tooth powder or starch. Pour the powder onto the stain and let it sit for a little over an hour, then vacuum the coating.
• To remove wax, paraffin, chewing gum, and plasticine, we use the cold method. We apply ice in the bag to the problem area to bring it to a solid state, and then remove it with a knife or scraper. Sometimes they use a completely opposite method - a cloth or napkin is applied to a drop of the substance, and a hot iron is passed over it. The disposal item must remain on the fabric.
• Blood stains can only be removed with cold water. We soak it, if it’s dry, soak it, take shaving cream and rub it into the stain. You can take a soda solution, hydrogen peroxide or ammonia. After a certain period of time, wash everything off with a sponge.
• Stains on carpets with a dark surface can be easily removed with table salt or lemon juice.
• Salt can also be used on red wine stains. The cleaning area must be quickly filled with wine, but only white, and moistened with cold water. The next step is salt in unlimited but reasonable quantities. We cover the stain with it, leave it and vacuum it after 15 minutes.

To remove stains from ballpoint pens and felt-tip pens, use alcohol or a solution of glycerin and liquid soap.

Rules for using Vanish for carpets

It is recommended to wet clean the carpet 3-4 times a year. You can use regular soap solution or baby soap. But Vanish for carpets will cope best with stains. It is specially designed to remove stubborn dirt from carpets. There are several recommendations for using Vanish:

• Before using the product, you must read the instructions.
• During processing, you must wear gloves to avoid an allergic reaction and irritation.
• The carpet should be cleaned in a well-ventilated area.
• Residues of the product should be carefully removed, especially for long-pile carpets.
• When using Vanish products, you should not additionally wet the carpet surface. This may cause shrinkage.
• Vanish is not suitable for rugs made from natural fibers.

Vanish for cleaning carpets, reviews of which are probably positive on all forums, is a universal remedy. It will help get rid of any type of dirt, from dirt to coffee stains. We need to experiment! With the help of Vanish you can get high-quality results in a short period of time. By the way, Vanish can also be used for carpets to remove stains from furniture.

5/5 — (1 vote)

Product varieties

The table shows the main types of products.