How to transport a new washing machine in a car

Is it possible to transport a washing machine lying down?

Transporting a washing machine and other large household appliances involves various difficulties. If you have just purchased such a product, then use the store’s delivery service. But what should you do if you need to move the washing machine when moving or send a household appliance to the country? We will talk about this in this article.

How to transport without shipping bolts

Frequently, the shipping bolts are lost, and it becomes necessary to transport the washing machine. For everything to go well, use improvised materials instead of factory fasteners. This requirement cannot be neglected, since the risk of machine breakdown when moving without securing the tank will be very high.

So, you can line the tank on all sides with soft materials in such a way as to completely immobilize it. Foam rubber or rags are excellent for these purposes. The tank must first be emptied by unscrewing the screws at the back and removing the top cover of the unit. Then you can begin fixing the tank.

Are safety bolts required during transport?

After purchasing a washing machine, it will be delivered to you using safety bolts. They protect the drum from loosening during transportation. If such bolts are safely lost, then you can transport the “washing machine” without them.

But it's not that simple. To prevent moving parts from moving inside the washing machine, you need to open its lid and secure all moving parts. To do this, you can use foam rubber and other materials that will prevent parts from becoming loose. When securing the drum, everything must be done to eliminate the risk of damage. The lid can be closed and the appliance can be moved into the van.

Transportation rules

If we summarize all the operating instructions for washing machines, we can outline a small set of rules that will help you get the equipment to your destination safe and sound. Following them will help you avoid a lot of problems and breakdowns on the road.

Transport equipment strictly in an upright position.
Securely secure the drum with the shipping bolts.
Completely empty the machine of water.
Use only soft packaging for the unit.
Securely secure the machine in the back of the vehicle.
Avoid sudden braking and turning.

The rules seem to be simple and obvious, but for some reason many stubbornly ignore them, relying on our notorious Russian maybe.

It is also worth noting that transporting the washing machine on its side is highly not recommended. If the drum makes at least a few serious jumps in this position, then you can give up on the counterweights - there will be no normal washing. You will have to put up with the squealing of the cylinder during operation and the “traveling” of the machine around the kitchen or bathroom. Well, or pay a lot of money to repair the counterweights. In addition, in this position, residual moisture may get on the electronic control unit.

As for the “on your back” position, not all equipment can be transported in this way. Simple budget models are not designed for such transportation, while devices from the mid-price and premium segments survive this situation with dignity.

How to transport a washing machine?

The best option is to transport the washing machine by special service employees who transport personal belongings. Specialists with extensive experience know how to properly pack, load and secure a washing machine in a car. If you do not want to spend your money, you can use personal transport. Well, you need to understand that a passenger car is not suitable for such transportation. And loading and unloading can only be done together with someone else. It will be difficult for one person to carry out such work.

There are two options for transporting the washing machine: vertically or on the back wall. This household appliance cannot be transported on the front wall or top cover.

The best option is to carry it in a standing position. But this is not always possible. If the “washing machine” can only be placed lying down, then cover the area and place the unit on its back. Secure the machine so that it does not move while moving.

Source

Features of transporting vehicles with vertical loading

Above we described the process of preparing, carrying, loading and transporting a front-loading automatic washing machine. There is only one peculiarity of transporting machines with vertical loading - you only have to fix the loading hatch (the machine does not have a separate cuvette for detergent, the powder receptacle is built into the hatch or is absent altogether - as, for example, in a semi-automatic machine).

If you do not follow the rules for preparing and transporting the washing machine:

The integrity of the power cable is damaged.
Parts of the body made of plastic become deformed and break off.
The cuff breaks and the loading hatch fasteners break.
Hoses and pipes are torn.
Electrical wiring and contacts get wet and short out.
The control panel toggle switch breaks off.
The drain pump becomes unusable.
The loose detergent dispenser breaks off.

The process of transporting a top-loading and front-loading washing machine by specialists in Novosibirsk does not take much time compared to trying to do it yourself. Negligence and inattention of handicraft workers will lead to damage to the integrity of the housing and malfunction of the electronics. In this case, the funds saved on transportation by a specialized company will be used for repairs, or in the worst case, the purchase of new household appliances. Remember that “the miser pays twice”!

Preparing the washing machine for transportation

Almost everyone knows: before transporting a washing machine, you need to pack it. It’s great if the original packaging has been preserved - then the car is carefully placed in a box, sealing the walls with polystyrene foam or sheets of foam rubber.

But when 3, 5, 7, or even 10 years pass from the date of purchase of the car, it is unlikely that the packaging will survive until that glorious moment - your move. Therefore, transporting a washing machine and the correctness of this process depends on your ability to improvise.

Before transporting the washing machine in a car, you should take the following measures:

Drum fixation

Next, we’ll look at how to secure the washing machine drum during transportation. The ideal option provided by washing machine manufacturers is fixation with transport bolts. If you have them, take them out and screw them into the special holes located on the back panel of the CM.

Fixing the drum with improvised means

Another question is how to transport a washing machine without shipping bolts.

If they have not been preserved, you cannot leave everything as is. Unscrew the back panel of the machine and insert into the space between the tank and the wall anything that is suitable to soften vibrations - polystyrene foam, foam rubber, soft rags.

Attach the panel in place.

Package

An equally important question is how to pack a washing machine when moving if the packaging has not been preserved. The body also needs protection, and we will tell you what can be done. Simply wrap the body with the material you have on hand:

Then tie the body with rope to securely secure the makeshift package. Since non-factory packaging is not very reliable, be careful when driving the car.

Important! If you are wondering how to transport a washing machine to another city, don’t worry - if you follow all the instructions correctly and drive carefully, the machine can travel hundreds of kilometers without any damage to it.

Transportation problems

But serious difficulties arise for those who decide to transport the washing machine themselves. There are many reasons for this, and the most common is relocation. By that time, the packaging had probably already rotted somewhere at the dacha, and the shipping bolts had been lost in the depths of the pantry. In addition, when moving, many people have to use not specialized transport designed for transporting goods of this class, but one that is more accessible and cheaper.

In this regard, many people ask quite logical questions: “Is it possible to transport a washing machine lying down, on its side, standing, or in any other way?” The domestic consumer either does not read the operating instructions or loses them immediately and forever, so this problem is more than relevant.

So, let's try to figure out how to transport a washing machine, what steps need to be taken and what should be avoided when transporting such equipment. When compiling the article, we took into account the recommendations of car manufacturers, as well as the sad experiences of owners reflected on thematic forums.

Transporting the washing machine

Now you know how to pack a washing machine to transport it in a car or truck. The next stage is the transportation itself, which is preceded by transportation and loading.

Important! Think it's okay to turn your washing machine upside down while you're taking it down from your floor? In no case! If carrying is uncomfortable, maintain only a slight backward tilt, but do not invert the SMA.

Next, we decide whether it is possible to place the washing machine on its side when loading it into the car. Although such transportation of a washing machine is undesirable, it is still acceptable. If there are no other options, transport it on its side, just be careful.

You can also transport the machine in the following positions:

IDEAL transportation, according to service center specialists, is with a fixed tank. The car turns sideways in the direction the car is moving. If there are other things, it is worth clamping the machine with them. This will ensure the safety of shock absorbers, contacts and pipes.

Subtleties of transportation

Attention! Do not turn the CM over under any circumstances!

It is better to organize transportation on your side or lying down than upside down. In any case, moisture will remain in the machine, which can drain onto the control panel. Repairs will be expensive, so either dry the car before transporting it or don't turn it over.

Before transporting the washing machine on its side, if there are no bolts for transportation, secure the tank with foam rubber.

And don’t forget about the detergent intake - there may be water left in it that will pour onto the board. It is better to take out the cuvette and transport it separately from the body. If this is not possible, wipe the part dry.

Carrying on the rear wall is available for all SMA models except Zanussi. In machines of this brand, heavy counterweights are located in such a way that in the “back” position they can crush the filler valve.

Not knowing how to transport a washing machine correctly, some owners manage to carry it to the front wall. This is strictly prohibited. In this case, it is almost impossible to deliver the entire hatch and cuff to its destination.

What are the consequences of violating transportation rules?

Without studying the established rules, SMA owners quite often cause significant damage to the equipment during its transportation. Even a short trip of no more than fifteen minutes can result in complete failure of the device.

What can happen if transportation is disrupted:

the power cord breaks,
machine parts made of plastic material break,
the rubber cuff of the loading hatch breaks,
the hatch fastenings and its guides break off,
shock absorbers fail,
rubber components are torn - pipes, hoses,
wires, contact groups are oxidized and short-circuited,
The selector wheel on the control panel for setting programs breaks,
the pump that drains the water loses its functionality,
If you forget to fix the powder receiver, it can also be damaged.

Each of the breakdowns is eliminated, except for the damaged housing part or the complete loss of functionality of the electrical unit. Connecting the machine for testing is permitted after it has been completely unpacked and the bolts securing the drum have been removed. It is likely that they may be needed someday. The best storage option is in a plastic bag secured with tape on the back wall of the washing machine.

The machine should be installed in the designated place after the levelness of the floor has been checked. If this requirement is neglected, then during operation the unit may leak or “refuse” to perform the specified function.

To prevent anything like this from happening, the machine must be carefully prepared for the upcoming move and its movements from the bathroom to the new destination must be carefully monitored.

What happens if you neglect proper transportation?

Not knowing how to transport a washing machine in a car, washing machine owners sacrifice the serviceability of their equipment. Just one short trip, even lasting 10-15 minutes, can result in a complete breakdown of the SMA.

These problems await malicious violators of transportation rules:

As a result, it becomes clear that before transporting the washing machine, it is worth preparing it thoroughly for this.

Keep a close eye on it during the entire move - from the door of the old bathroom or kitchen to the new location where the SM will be installed.

Now you know whether it is possible to transport a washing machine on its side, how to do it correctly, and what the consequences of handicraft transportation without observing safety precautions can be.

Source

Hoses, wires, hatches, trays

If the water supply hose becomes detached, it is best to remove it and transport it separately. Otherwise, securely tape it behind the machine along with the power cable. As a rule, premium equipment is equipped with special grooves and holders for hoses and wires, so there should be no problems here. Additionally, you can wrap everything that dangles in a soft cloth or packaging film with pimples.

The laundry hatch along with the tray should also be securely secured with the same tape, preferably in two or three layers. In extreme cases, you can transport the washing machine lying down. Then the door with the tray will definitely not open, but not every equipment is designed for such a violation of the transportation instructions.

Preparing the washing machine for transportation

The most important stage in transporting a washing machine is preparation. There are general recommendations here, and there are specific ones, depending on the presence or absence of transportation bolts. First, what everyone needs to do in preparation for transporting a washing machine:

Now you can move on to the most important point - fixing the drum. Depending on whether there are shipping bolts or not, the preparation methods differ.

With transport bolts

If there are shipping bolts for the washing machine, then fixing the drum is quite simple. Just find the holes on the back of the washing machine for installing the bolts, and then screw them in.

Most often, on washing machines, the holes for the transport bolts are closed using special “plugs”; they must first be removed and saved in order to unscrew the bolts in a new place and install the “plugs” back.

Without transport bolts

This situation also happens - it’s not a problem; transporting a washing machine without transport bolts is quite possible. The main thing is to properly fix the drum so that it does not spin in different directions during transportation. Here are several ways to do this.

Method 1. Place polystyrene foam in the hole between the drum and the walls of the washing machine. It must be laid tightly enough so that the drum does not rotate.

This method has a clear disadvantage - the foam crumbles, and after installing household appliances in a new place, it will take a long time to remove the foam crumbs. But there is also a clear advantage of this method of fixing the drum - there is a minimal chance of damaging it during transportation.

Method 2. Similar to the first, but instead of polystyrene foam, rags are laid out. You will need a lot of unnecessary rags, and preferably it should be a fairly soft fabric.

Unlike the method with foam plastic, the rags do not crumble, and they also do a good job of keeping the drum from rotating.

Method 3. Suitable for those models of washing machines in which the hole between the drum and the walls of the machine is difficult to fill due to the small free space. You will need to unscrew the back cover of the device and put foam or rags there.

This method has obvious disadvantages - you need to make some effort to remove the cover and not break anything inside the device.

In general, all these methods are similar, but each of them has its own nuances.

Drum fixation

One of the main rules for transporting washing machines is to securely secure the drum. Many people neglect this, and as a result, half-dead equipment with a squealing drum, if not working at all, arrives at their new place of residence.

The best option is to fix it with the shipping bolts included in the package. To do this, there are special holes in the back of the machine where you need to screw them. But as mentioned above, not everyone has such bolts, so you have to use improvised means.

Here, one proven option acts as a panacea. To fix the drum, you need to unscrew the back panel and, if necessary, a few more to have full access to the inside of the machine. Then the void between the body and the drum must be filled with some soft or pliable material. Foam rubber, polystyrene foam, and ordinary rags will do just fine. The main thing is that the cylinder does not move and is securely fastened.

How to pack a washing machine for transportation

Once the washing machine is prepared and the drum is secured, you can begin the process of packing it for transport.

Is factory packaging required?

Unlike a TV or mirror, shipping a washing machine does not come with potential damage issues. Yes, if the equipment is not carefully loaded and unloaded, chips and dents may occur on it, but in the case of a washing machine, its functioning in a new place is much more important.

Accordingly, if you don’t have the box that your washing machine came in, that’s okay, choose one of the packaging options described below.

What to pack a washing machine when transporting

If there is no suitable box for transportation, you can use available materials:

If you carefully load the washing machine, you don’t have to pack it in anything at all. The main thing is that the drum, hoses and wires are securely fastened.

Thorough preparation is the basis for safe transportation

When purchasing a new washing machine, there are no problems with transportation. The equipment is reliably protected by the original packaging, so when loading and moving the car you don’t have to worry about the integrity of the unit. Difficulties have to be encountered when transporting equipment that has been in use. The owner has long ago gotten rid of the box in which the machine was sold, and the shipping bolts are irretrievably lost. In order for the equipment to reach its destination without damage, you will have to carefully prepare for the trip. The procedure is as follows:

The washing machine should be disconnected from the power supply and the water supply hoses should be disconnected.
The equipment must be thoroughly dried. Lower the water drain hose below the pan of the machine - this will help remove the remaining liquid. Leave the valves open for a while to allow the moisture to completely evaporate.
Carefully twist the wires and hoses and wrap them in plastic. Use tape to secure the powder compartment.

Offers its assistance in transporting the washing machine. A specially equipped truck and a team of experienced movers are provided to clients. The team knows all the intricacies of handling equipment, so transportation will take place as quickly and safely as possible. The company has set affordable prices for services. Entrust the solution to the problem to professionals - do not risk your “assistant”.

Back to Contents

How to transport a washing machine in a car

Transporting a washing machine in a truck, like a Gazelle, is not difficult. It is enough to load it into the body and securely fasten it.

As for a passenger car, there are several nuances. Let's look at three ways to transport a washing machine in a car: standing, on its side and on the back wall.

Experts believe that this is the best option for transporting a washing machine. When it is in its natural position, there is less chance of remaining water getting onto critical parts of the device.

It is important, when transporting the washing machine while standing, to place it sideways in the direction of travel of the car. This must be done so that there is no additional stress on the components of the washing machine - pipes, shock absorbers, and so on.

You can place the washing machine standing up only in SUVs with a large trunk. Other passenger cars will have to use different transportation methods.

On the side wall

It is recommended to transport the washing machine on its side in cases where it is not possible to install it in the standard position for transportation. For example, you can place it in this position in the trunk of a regular sedan or hatchback, or in front of the second row of seats in any passenger car.

If you place the washing machine on its side during transportation, be sure to remove the powder drawer or dry it completely after loading. This must be done to prevent water from dripping from the drawer onto the electronic components of the washing machine.

On the back wall

In exceptional cases, if the first and second transportation options are not possible, you can place the washing machine on the back wall. But be sure to lay something soft under it, such as a blanket or towel. Keep in mind the possibility that the remaining water from the machine may leak onto it.

Properly transporting a washing machine is not as difficult as it seems. There are many nuances that are worth paying attention to, but the process itself is very simple and does not require the involvement of specialists. You can handle it yourself, and use a regular passenger car for transportation.

Source

Loading Features

It’s good to carry the washing machine in a truck - then it can be placed vertically, secured or tied down. But it’s more difficult to do everything in a passenger car. Main loading methods:

Standing (if there is a top trunk or the space allows for a regular one - but then you will have to drive with the trunk open).
On one side.
Lying on the back wall.

Important! If you decide to place the equipment on its side, make sure that the powder receptacle “looks” down.

The position of the housing depends on the make and model of the device. So, any car except Zanussi can be transported on the back wall. Why can't you experiment with Zanussi? It's simple: the fill valve in these models is located next to the counterweight, which can easily damage the part.

Is it possible to turn SM upside down? Not worth it. If this is the only option, then you will have to completely remove moisture from the system and dismantle the engine.

It is also not worth transporting it on the front wall in a car - you can tear the hatch cuff, damage the glass on the door or its fastenings. Repairs are inexpensive, but there is no need for extra hassle.

The unit must be transported by an experienced and calm driver who will avoid all potholes and potholes and avoid sudden braking and jerking.

How to transport a washing machine safe and sound

Issues discussed in the material:

If you have to move, you will need to transport a huge amount of things, including household appliances. Then you will be faced with the question: how to transport a washing machine? Transporting it simply as a large item is not an option. Can it be shipped without the box or shipping bolts? Is it permissible to transport the machine on its side? How to transport it correctly? You will learn about all this in our article.

Is the washing machine transported lying down?

There are standard requirements for transporting a washing machine, which are necessarily listed in the instruction manual. The following conditions of carriage are stated there:

Naturally, every rule has its exceptions, which are determined by life situations. In such cases, you have to find the right way out so as not to damage the equipment. But remember that all violations of the instructions are fraught with consequences and will remain on the owner’s conscience.

In exceptional cases, it is allowed to transport the device lying down (on its side). The floor in the body is first lined with soft material or foam rubber. The machine is placed “on its back”, the sides with the drum and panel should remain on top. For the machine, the position “along” is determined in relation to the movement of the vehicle.

How to transport a new washing machine

The first journey of the machine will begin immediately after its purchase: the store will deliver the purchase to your home. Household appliances are always well packaged, which means they are not afraid of shocks during transportation (within reasonable limits, of course).

This delivery is the best solution, and it is usually free if you purchase a premium machine. Firstly, you do not need to look for movers, and secondly, the seller guarantees that you will receive the goods intact and undamaged during transportation.

It is still recommended to make sure that the machine has no mechanical defects, its packaging is not damaged, and the package contents correspond to those stated.

Everything is different if you need to transport a used washing machine. You may not even know what shipping bolts are. It is clear that you are unlikely to remember where they are. The original packaging has already been thrown away. The “Gazelle” for transportation is also selected not the most suitable, but the most budget-friendly one. Therefore, the question of how to transport a washing machine remains relevant. In order for this event to be successful and the equipment to remain intact, you should prepare in advance.

Expert advice

If the machine needs to be lowered from a multi-story building, you will have to try not to turn it over. Knowledgeable people assure that the device descends only in a vertical state, only slight inclinations are allowed. Such carrying is impossible for one person, so several people will be required for such an operation. The fact is that during careless carrying or installation the machine can be easily damaged.

It is not recommended to drag the washing machine around. There is a possibility of not only damage to the floor covering, but also to the body of the unit. The shape of the machine is streamlined, there are no additional handles for carrying, so you will have to tilt it a little whenever you move it. Before performing such “maneuvers,” it is better to enlist the help of another person who will secure the device from the opposite side.

If you don't have bolts to secure the drum, you can purchase them at a hardware store.

How to properly prepare for transporting a washing machine

What is the best way to transport a washing machine? First, we pack it in the original box, filling the voids with polystyrene foam or foam rubber. But usually, used household appliances do not retain either the box, shipping bolts or other parts included in the package. This means that you will have to use all your imagination. To prepare equipment for transportation, you will have to perform certain actions:

Now you need to secure the tank. It is recommended to use shipping bolts; they are screwed through special holes located on the rear panel.

How to transport a washing machine without transport bolts, for example, if they are lost? Unscrew the bolts to open the top panel. We fill the voids between the tank and the body with polystyrene foam, foam rubber, or any fabric will do. Replace the top panel and secure it.

So, the tank is securely fastened. Now we wrap the “washing machine” with a soft cloth and tie it with a rope on top.

How to transport a washing machine without damage, because the doors may open during transportation. To eliminate this, despite the presence of special fasteners, we additionally secure them with adhesive tape or rope.

The drain hose should be twisted and also secured with adhesive tape. Then put it in a bag or wrap it in something.

Is it possible to transport the machine without bolts?

Rarely does anyone remember about transportation bolts, because many people lose them soon after purchasing the machine. And if this happens, you will have to look for alternative options.

Washing equipment is often transported without such fasteners. In this case, it is necessary to remove the top panel to immobilize the elements inside.

After removing the body, arrange the gasket. It is not recommended to use hard elements - only foam rubber, rags or polystyrene foam.

Having filled the free space, screw the lid into place. Once the tank is immobile, protect the side walls. For this purpose, the body is wrapped in fabric and secured with cord.

Now you don’t have to worry about the safety of your equipment - everything will be delivered without damage.

How can you transport a washing machine after use?

It is recommended to transport the washing machine vertically, having first secured the drum and tank.

Is it possible to transport a washing machine on its side? This option is allowed, but it must be laid in the direction of movement of the truck.

When the Gazelle contains a lot of household appliances, the machine should be placed, for example, between the electric stove and refrigerator being transported. In this position, it will not jump or fall, which means that all elements, electronics and pipes will remain intact.

As soon as the “washing machine” is prepared for transportation and packed, you can transfer it to the “Gazelle”. But difficulties may arise here too. For example, if you live on the seventh floor and the elevator does not work.

When going down the stairs, you need to hold the washing machine vertically - that is, in the position in which it was used.

Is there no way to transport equipment this way? Then you can tilt it back.

It will be easy to load a bulky machine into a large transport “gazelle”. But how to transport it, for example, in a regular sedan?

The machine is transported in the following position:

Is it possible to transport a washing machine on its side without securing the drum and tub? Some people think so. However, to prevent breakage, we recommend placing soft material in the voids between the elements of the machine.

Used equipment must be thoroughly dried when transported on its side. Water usually accumulates in the air conditioner compartment. And the problem is not that it will leak onto the upholstery of your car. The fact is that the electronics may be damaged.

Not sure if the compartment is completely dry? Wipe it or take it out and transport it separately with the machine.

Preparation

Many people ask: “Is it possible to transport a washing machine as it is?” That is, unscrew the hose, unplug it from the outlet - and off you go. Experts unanimously answer that no, only after preparation. A washing machine is a stationary appliance with specific mechanisms and housing elements that are designed to operate in one position. The same applies to transportation.

The first step is to drain the remaining water from the tank, and there will definitely be some there if you did the laundry a day or two ago. To do this, just tilt the car back a little so that the drain pipe is below the level of the pan. Afterwards, it is advisable to leave the laundry hatch open for several hours, which will allow any remaining moisture to evaporate.

Is it possible to transport a washing machine lying down?

It also happens that transporting the machine in an upright position is impossible. How to transport a washing machine lying down? There are two options here: on the back panel or on the side.

Some owners of this household appliance are confident that they can transport the washing machine on its side without transport bolts.

However, it is recommended to always secure the drum, no matter in what position the equipment is transported.

Of course, the washing machine can be transported on its side. However, do not forget about the conditioner container. As soon as you lay the equipment on its side, most likely, all the water that has accumulated there will flow out of the compartment. If this happens, the control panel and contacts may get wet, which means that malfunctions will appear in the electronics.

To prevent this situation, you should remove this container during transportation and transport it separately. Or dry well in advance and wipe the inside.

Transporting an automatic washing machine will be correct only when the air conditioner compartment does not point upward (the position may differ in different models).

All cars, with the exception of the Zanussi brand, can be transported on the rear panel.

What is the difference between Zanussi equipment? The fill valve is located next to the counterweight. Therefore, if the machine is placed in an unnatural way, it becomes unusable.

Another important recommendation on how to transport a washing machine - on its side or on the back: consider your driving style. So, you shouldn’t drive too fast, brake sharply and turn. By following these recommendations, you will be able to transport your automatic washing machine correctly.

We prepare the unit for moving

Before loading the machine into a vehicle, it must be protected with factory-made packaging material. When this is not available, you will need additional protection from foam pads, foam sheets, and soft blankets. Such options are considered more successful. Considering the fact that the factory box of the machine is stored for no more than the warranty period, then it is simply thrown away, you will have to use available options. In addition, the machine will have to be securely fixed so that it does not get damaged.

Transport the laundry washing unit as follows:

Disconnect the SMA from the electrical network. Then the water supply and sewerage are turned off.
The remaining water in the drum, hoses, pump and pipes is drained. If this is not done, then during carrying you can have several unpleasant moments or get some things wet. To drain the water as much as possible, the machine should be tilted and the free end of the hose should be lowered into a bucket or basin. Attempts to disconnect the hoses from the washing machine are prohibited, since these elements form an integral composition. After draining the water, the loading hatch should be left open so that the tank of the machine dries out better.
All wires, hoses and pipes are secured. This action is performed with tape or plastic clamps. This measure will protect all of the listed elements from accidental damage.
Each protruding element is fixed with tape. This way you will reliably protect not only the SMA, but also the objects surrounding it. Do not forget about the edges of the case so as not to damage the enamel coating.
The drum is screwed through the rear panel with transport bolts to prevent it from rotating.

The washing machine is ready for transportation. All that remains is to securely fasten it in the body, making it impossible to move.

Many experts agree that the best option for transporting a laundry washing machine is in a vertical (standing) position. You just have to securely fasten the drum. Loading onto the vehicle body must be carried out vertically. If you have large items, it is recommended to install the machine tightly among them. During transportation, the unit must not be turned upside down. This is an exceptional case for new devices that do not contain a drop of moisture.

What are the dangers of improperly transporting a washing machine?

Before determining how to transport your washing machine - vertically, on its side or on the back, you should study the consequences of incorrect transportation. The worst that can happen is that the equipment stops functioning.

From the above malfunctions, it will not be possible to eliminate the breakdown of the case, as well as the loss of functionality of the machine. As soon as the equipment is delivered, remove the protective packaging from it and unscrew the shipping bolts. Only then can its functioning be checked. You will most likely still need the bolts, so it is recommended to pack them and secure them with adhesive tape on the back of the machine.

Before connecting equipment, make sure that the floor surface is level. Otherwise, the washer will start to leak during washing or stop working altogether.

Knowing how to properly transport an automatic washing machine, you can do this without damaging the equipment. Follow the recommendations listed above. It is important not only to pack the machine well, but also to choose the optimal position for transportation. This way you will eliminate shocks and falls, which means the machine will serve you for many years.

What are shipping bolts used for?

Fasteners that protect the internal parts of the machine from damage are called transport bolts. They are a mandatory element that comes with new equipment, but over time they can be lost, and if there is a need to transport the unit, it is important to find a replacement for these fasteners.

The tank and drum are secured with shock absorbers and springs, which minimize vibrations that occur during operation of the machine. But when transporting equipment, shocks and shaking cannot be ruled out, which can lead to damage to the drum, breakage of fasteners and other troubles. Shipping bolts secure the drum firmly in the housing, preventing possible damage when moving the washing machine.

Failures associated with improper movement of the MCA

Users who neglect the rules for transporting washing equipment sacrifice the serviceability of their “home assistants”. Even one, the shortest trip, lasting 10-20 minutes, if the basic recommendations are not followed, can be fatal for an automatic machine. The breakdown can be so serious that the device will be unsuitable for further use or a lot of money will have to be invested in its repair.

Most often, when transported incorrectly, the following occurs:

break in the power cord of the automatic machine;
scratching or deformation of the case;
rupture of the drum seal;
breakage of hinges or latches of the hatch door;
failure of shock-absorbing elements;
damage to rubber tubes and hoses;
breakdown of sensors and valves;
oxidation of wires, contact closure;
failure of the programmer (knobs for switching modes on the dashboard);
damage to the drain pump;
breakdown of the powder receptacle;
failure of the main electronic module.

To avoid many problems, it is enough to simply properly prepare the automatic machine for transportation. Handle the equipment with care from the time it is packed until it is installed in a new location. Follow the basic rules of transportation, and then the “home assistant” will not even notice the movement and will work as before.

Interesting:

Where are the transport bolts of the Zanussi washing machine?
How to transport a washing machine - expert advice
Installing a Whirlpool washing machine
Removing shipping bolts on a Candy washing machine
How to install and connect a Samsung washing machine
How to remove shipping bolts on a washing machine...

Reader comments

Share your opinion - leave a comment

How to demolish a washing machine and load it onto a car

A washing machine is not an easy device. In order to move it from place to place, the strength of two strong men will be needed. And some manufacturers, for example Miele, produce units whose weight is 100 kg or more; they can only be lifted by three people.

You can only take the washing machine out of the apartment directly, without turning it over. Only a slight bend back is allowed. If there is no elevator at the entrance, then you simply cannot do without professionals. It is better to move and move the washing machine with movers who have the relevant experience and the necessary equipment for this.

An important part of the process is loading the unit. Manufacturers indicate in the instructions how you can transport the washing machine without the risk of damage - “standing up”. Accordingly, a passenger car is not suitable for such tasks. It is better to load the unit sideways in the direction of movement. If you are transporting other things along with the washing machine, then bundles and bags with clothes and bedding will only help - they can be placed around the machine for additional shock absorption.

How to prepare

First you need to start preparing the washing machine for further transportation.

Shutdown

Experts recommend disconnecting the washing machine from all communications. Therefore, before transportation, the equipment is disconnected from power sources and disconnected from the sewage system. It is also disconnected in advance from the water pipes that are responsible for the flow of water.

If you do not disconnect all communications in advance, you may damage the sewer or water hoses when trying to transport the washing machine.

Removing water

Another action that is performed in advance is draining the remaining fluid from the system. Water often remains in the pump, pipes and hoses that are responsible for the flow or drainage of water.

To clean the system, you will have to get rid of the drain filter and any remaining liquid yourself.

Fixations of hoses, wires and hatch

Many people choose not to secure wires and hoses that may be attached to the washer. However, it is better to secure them in advance so that when carrying them they do not cling to anything or get tangled. They can be secured with tape to one of the walls or removed altogether.

Taping sharp corners and parts with tape

Any equipment has sharp corners, and the washing machine is no exception. The main danger of such corners is that they can scratch you and damage your limbs. Therefore, for safety reasons, it is better to carefully cover each sharp corner with a thick layer of tape.

Fixing the tank

Before transportation, the drum must be securely attached to prevent accidental damage.

How to Install Shipping Bolts

Most often, special transportation bolts are used to secure washing equipment tanks. These are the most suitable fasteners that manufacturers recommend using. These bolts are very easy to use. To fix the tank, simply insert each bolt into the drilled mounting holes located in the back of the machine.

How to transport without shipping bolts

Sometimes people do not have transportation fastenings and have to fix the drum with improvised means. First you need to unscrew the back panel of the structure and place things that can soften vibrations in the hole between the wall and the tank. Unnecessary rags, foam rubber or small pieces of foam are suitable for this.

Package

Before transportation, equipment must be packed so that it is not damaged on the road. Various materials can be used for packaging.

In factory

The best option for packaging equipment is to use the original box. In this case, you just need to place the washing machine inside the package and pack it carefully so that it does not dangle during transportation. The box must be carefully wrapped with tape so that it does not open on the road due to possible shaking.

Textile

People who purchased a machine more than five years ago rarely keep the boxes and therefore have to pack the equipment in other ways. Fabric materials are often used to completely wrap the structure. Fastening the fabric is carried out with ordinary tape or adhesive tape.

Corrugated cardboard

To pack the washer before transportation, you can use corrugated cardboard. Cardboard covers the side walls of the washing equipment, as well as its upper and lower parts. Cardboard sheets are fastened together with metal staples or tape.

Stretch film

Many people think that stretch film is only used for packaging small items, but this is not true. This material is also suitable for packaging washing machines. The film is carefully wrapped around the equipment to protect its surface from mechanical damage.

Additional recommendations

It will be much easier to prevent equipment damage during transportation if you do not neglect these tips:

Try to transport the electrical appliance in the back of a truck. Pre-fix the equipment using special belts.
Make sure that the machine will be transported under suitable conditions. The driver should not brake sharply while driving or make sharp turns. Otherwise, incorrect driving will result in the object moving along the body or trunk of the vehicle.

Proper preparation of the washing machine for moving will avoid breakdowns and damage to other items in the body. The length of operation of the device in the future will depend on how correctly each stage is completed: preparation, manual carrying, loading and transportation.

Be careful when transporting, and then the equipment will remain intact and will delight you for many years.

Preparatory procedures

Transporting a new automatic machine is quite simple. The first rule is to pack the washing machine and install the shipping bolts. The equipment from the store fully meets these requirements; in any case, it will be in the original packaging, sealed with sheets of foam plastic, and with a fixed tank.

When accepting a new machine from a courier, do not rush to sign the document. Remove the SMA from the packaging, carefully inspect the body, make sure there are transport bolts. If there are no defects, then the delivery was carried out in accordance with all the rules.

Transporting a washing machine that has already been in use is more difficult. Usually, the original packaging is not preserved, and owners have to improvise, protecting the machine body with a blanket, rug or foam rubber. We need to figure out how to protect the machine from mechanical damage. A used SMA should be prepared for transportation. Necessary:

de-energize the machine;
disconnect equipment from water supply and sewerage;
drain the remaining water in the system by unscrewing the waste filter plug;
fix the hoses on the body so that they do not “sway” when carried;
take out the detergent cuvette, wipe its walls dry and put the tray back;
seal the corners of the case with several layers of tape;
secure the drum with the transport bolts provided for this purpose. Screws are always included with the equipment.

Be sure to secure the drum, otherwise it will dangle during transportation, damaging nearby parts of the washing machine.

If the original packaging has long been lost, then there are several ideas on how to protect the body of the washing machine. Wrap the machine with whatever you have on hand: fabric, corrugated cardboard, stretch film or foam rubber. Then the machine gun is tied with a rope - this will help securely secure the homemade “shell”.

Where to begin?

When moving the household appliance, you will need shipping bolts to secure the drum. If you can’t find them at home, then try buying new devices. When you can’t cope with this task, improvised devices will come to the rescue.

Below are detailed tips that will help you use the equipment correctly. Pay attention to whether packaging is required when loading, as well as in what position the device should be moved.

If there is a packaging box left in the house, then you can safely use it for your purposes. Fill the gap between the walls of the device and the box with foam rubber or polystyrene foam. In cases where the packaging has been disposed of long ago and the fasteners are lost, you can use other available items.

Before loading the washing machine, carry out preparatory work according to the following scheme:

Make sure that the device is disconnected from the water supply and network. Be sure to unfasten the drain hoses to prevent them from being damaged while moving the item.
Disconnect the drain hose and drain the remaining fluid if necessary. Tilt the device slightly to one side, this will make it easier to carry out the procedure.
Open the tank valves to allow the inside of the device to dry.
Carefully secure the wires, hatch, and hoses so that they do not move during transportation. In this case, it will be much more convenient for you to carry the device.
Securely secure the powder container with tape so that this part is not damaged and is closed.
Use tape to secure sharp corners and protruding elements; this measure will prevent you from getting hurt when carrying the item.

Pay special attention to preparing the drum of the electrical appliance.