Why doesn't the washing machine pick up powder? Causes and remedies

With a slight movement of your hand, you loaded the dirty laundry into the drum, poured in the powder as usual, filled in the conditioner and calmly went about other things. But something went wrong during the washing process, because after it was completed, the powder remained in place, and dirty spots remained on the laundry.

Don't worry! The situation when the washing machine does not wash away the powder is quite common and, moreover, is often not associated with serious malfunctions. Therefore, remain calm and read our article to figure out what happened to your “assistant”.

How does the process of collecting powder and conditioner work?

To understand this, you need to find out the principle of this process for washing devices. All washing machines, as a rule, are equipped with special trays where detergent in the form of powder or gel, conditioner, fragrances, etc. are placed. Automatic washing machines have pull-out trays, inside of which there are 3-4 compartments designed for different stages of washing. During the washing process, water is supplied inside the tray, washing away powders, gels, and conditioners directly into the washing tank with laundry. Why doesn't the washing machine always pick up the powder from the compartment?

Design features of trays

Trays in any washing machine have two main designs:

  • with multiple intake valves;
  • with one inlet valve.

Trays with one inlet valve are usually equipped with mechanically controlled washing machines. This is a rather complex system for moving water from one section of the tray to another. Modern electronically controlled washing devices have trays with multiple inlet valves separately for each compartment.

Clean the powder flush channel in the dispenser

If the washing machine does not completely remove the powder from the tray, the reason may be a clogged powder flush channel due to a blockage formed there. This can happen due to the use of cheap, low-quality powder that does not dissolve properly. In addition, hard water may be to blame, as well as foreign objects getting into the tray. One day, our client dropped tweezers into the tray, but noticed it was missing in time and thought to call a professional.

Check the channel through which the powder is fed into the drum and, if necessary, clean it yourself using a soft toothbrush or flexible brush.

Most washing machines come with a special flush channel blocker for dispensing liquid detergent. This is a regular flap that blocks the flushing of the product into the drum. Often people put it in the grooves, block the flush, and forget about it. Thus, the channel for flushing the powder is blocked and the machine does not flush it away. It is necessary to always remove the blocker from the grooves and return it to its intended place.

The washing machine does not pick up powder from the compartment, reasons and solutions

If the powder remains in the tray during washing, there may be many reasons for this, for example:

  • poor quality powder;
  • its quantity is incorrect;
  • incorrect choice of program mode for washing;
  • weak water pressure;
  • Malfunction of the water flow switching valve.

You can find out why the washing machine does not pick up powder from the tray by following a series of steps to check the device. There are several ways to determine the cause of what happened and eliminate it.

What to check first

First try closing and then opening the main cold water tap.
Check the water pressure by opening the tap in the bathroom, for example. Also, if the apartment uses old water pipes, the protective mesh on the tap may be clogged with various debris and pieces of rust that do not allow water to pass through them. Attention. Low water pressure can occur when simultaneously using water from other taps (kitchen, bathroom, toilet). First of all, we exclude factors related to the detergent itself, its quality, quantity, and dosage. Next you need to check:

  • the flow of water into the machine (is the water supply valve open, is there sufficient water pressure);
  • correct choice of compartment for washing powder in the tray;
  • the channel for water entering the compartment with powder (may be clogged);
  • the correct amount of powder used (it is better to use a measuring spoon).
  • Is the water supply valve fully open (if it is not open all the way, water can fill into the tank of the machine very slowly and for a long time);
  • if the tray is littered with powder that has not washed off, stuck together in a lump or dried out from the previous wash, you should remove the tray and rinse thoroughly with warm water;
  • whether the required amount of powder has been added correctly.

Advice. It is best to use good quality washing powders for washing, and it is advisable to rinse the tray itself after each wash.

It's all about the powder

The quality of washing powder is of great importance. If the powder is of poor quality or counterfeit, it may form lumps and dissolve poorly. If you poured more of it than necessary, it may also remain in the compartment or become lumpy. The required amount of laundry detergent is usually indicated on the detergent label and is calculated based on the amount of dirty laundry placed in the washing machine.

Water supply problems

The reasons for not washing off the powder with water from the tray may also be:

  • Low water pressure. If the pressure is weak, the water will not be able to rinse the powder out of the compartment well. It will remain on the walls, accumulate, and clog the water supply channel.
  • Check whether the water supply valve to the washing machine is fully open.
  • If the pressure is good, then you can also check the fill valve filter, which often becomes clogged due to poor quality water inside the water pipes.


Check if the water supply valve is fully open.

The filter mesh is clogged

A clogged strainer located in front of the water inlet valve is often the cause of unused powder remaining inside the tray after washing. To clean it you need:

  • disconnect the washing machine from the power supply;
  • turn off the water supply tap;
  • remove by unscrewing the inlet hose attached to the rear side of the machine body;
  • Use pliers to carefully pull out the filter;
  • rinse it thoroughly and replace it;
  • screw on the hose.

Water inlet valve faulty

During the normal washing process, the valve opens and the required amount of water is drawn into the machine. But if the valve is faulty or broken, then water may flow in small quantities or not at all. In this case, the machine gives a signal about the lack of water. This is why the washing machine leaves powder inside the tray. This problem can only be solved by replacing the valve. Important. In modern electronically controlled washing machines, as a rule, several special solenoid valves are installed that supply water to different compartments of the tray. If the powder remains in the tray, you need to remove the top cover and figure out why the valve does not supply water to the desired compartment.

Clogged pipes

The washing machine does not take all the powder from the tray if the drain pipe of the washing solution into the machine tank is clogged.
This can be determined by the remaining water in the powder compartment or because water may be leaking out of the tray. In addition to the pipes, the hoses themselves, which connect the water supply valves to the powder receptacles, can sometimes become clogged. To clean the pipes you need to open the top panel, which is secured with two bolts to the rear wall. For this:

  • unscrew the bolts and move the panel back a little;
  • there are 2 hoses, one supplies water to the compartment with the powder, through the second the water is drained into the drum;
  • remove the hoses by loosening the clamps that secure them;
  • clean them from the inside, check for integrity;
  • insert the hoses into place, securing them well;
  • run an empty test wash.

The powder receptacle itself is clogged

The cuvette, in which the tray itself with compartments for powder and other detergents is located, also needs to be washed periodically to avoid clogging.
This is done like this:

  • open the cuvette all the way;
  • by pressing the lid with your finger in the place of the special pointer or by pulling the tray with the compartments towards you and slightly downwards, remove it;
  • clean, wash;
  • clean all sides of the cuvette where the tray is inserted, check whether the water supply holes are clogged;
  • return the tray to its place, returning it to the cuvette until it stops.

The laundry loading door is not closed

The reason why the powder is not washed off in a household washing machine may be a door that does not close hermetically due to a broken locking tab on it, or a latch in the housing lock. In this case, water will not be supplied and washing will not start. This often happens due to the skew of the hinges on the door or the stem falling out of the tongue that serves as a fastener for it.

Broken water inlet valve

This element is responsible for the timely supply of water inside the machine. When a signal is received that there is already enough water in the washing tank, the valve shuts off the water. If the valve is broken, it will not open and will not be able to supply water.

To understand what’s wrong with it, it’s best to ring it, since such breakdowns usually occur due to a burnt-out coil. The valve is located behind the washing device; the inlet hose fits just right into it. If the valve fails, it simply needs to be replaced.

Broken software module

This “computer” device of the washing machine controls all the intelligent actions of the machine; all washing programs, data, and functionality for controlling all sensors are concentrated here. If the cause of the malfunction lies in this software module, then you cannot do without service specialists.

Why is it beneficial to contact us?

has been diagnosing and restoring cars of all brands and models since its founding. Advantages:

  • Applications can be accepted and a technician can visit any day of the week, including weekends, at a time convenient for the client.
  • Having our own spare parts warehouse, the range of which includes running parts for most popular brands.
  • We work with spare parts manufacturers, which allows us to create favorable prices for services.

When the machine stops picking up powder, it is better to contact our service center. We will quickly and efficiently restore operation, provide a guarantee and advise on all issues that arise.

In what cases is it necessary to contact a specialist?

Everything regarding external causes of malfunctions associated with the remaining powder in the tray, such as problems with the powder, mesh filter, clogged pipes, can be eliminated independently.
But everything that relates to malfunctions of the water supply system, software module or replacement of inlet valves is best entrusted to specialists who carry out repairs, following the manufacturer’s flow charts, using original spare parts.

Watch a video about why the washing machine does not wash away powder well

Expert advice

To prevent detergent and conditioner from accumulating and causing damage to household appliances, you need to follow simple recommendations:

  • always use high-quality detergents (powders, gels) and conditioners;
  • check the expiration date of the products used;
  • regularly wash and dry the powder and conditioner compartments;
  • check the degree of opening of the water supply filter;
  • add products within the recommendations specified by the manufacturers on the packaging;
  • keep the drain and pipe in the washing machine clean;
  • choose the right programs.

When you notice that detergent or conditioner remains in the cell, this is a sign that you need to carefully inspect the machine and clean the dirty parts that need it. If the equipment is in perfect order, then the problem is in the washing powder. In any case, you should not leave this problem unresolved, as this may lead to breakdown.

Who will help to repair?

Professionals working in . can help with the repair of household appliances from any manufacturer. Employees regularly improve their skills and have the necessary permits and certificates. A warranty card is issued for installed spare parts and work performed.

The technicians quickly travel to all areas of Moscow, New Moscow, and the Moscow region, carrying with them the necessary diagnostic and repair equipment. An urgent call is possible, which is completed within 2 hours.

You can call a specialist by phone every day, seven days a week, from 8.00 to 21.00. You can fill out an application on the service center website (24/7) or use messengers (Whatsapp, Viber, Telegram).

Water supply nozzle malfunction

If the washing powder remains untouched in the dispenser after washing, it is possible that the flow of water intended to wash off the powder did not reach the required compartment. The direction of the water is adjusted by adjusting the nozzle. The cable that moves the nozzle can become stuck, mixed up or broken, resulting in incorrect water supply. The nozzle can also become clogged with dirty, rusty water coming from the water pipes. To fix the problem, you will need special equipment and experience, so it is advisable to entrust this to a specialist.

What to do if the tray is clogged with powder

Most often, the tray becomes clogged due to excessive use of powder. Plaque forms in the compartment, over time it hardens and interferes with the passage of water and the collection of detergent. Cleaning fossils is not easy, so you need to periodically rinse the dispenser tray under the tap.

Poor quality detergent does not dissolve completely in water. Therefore, if you notice that the powder remains on things, change it to a better product.

How to clean the tray:

  1. Open the cuvette and, by pressing the latch in the center, pull it out of the housing.
  2. Rinse the compartments under running water; you can additionally clean contaminated areas with an old toothbrush.
  3. If there are fossils on the walls, soak the tray in a container of water for a while.

Easily fixable problems

As a rule, there are three compartments in the design of the detergent tray :

  1. For loading pre-wash powder.
  2. For main wash powder.
  3. For fabric softener.

During the washing process, water washes away the powder and the conditioner from the cuvette goes directly into the drum of the washing machine, where the products act on the fabrics.

Don’t worry ahead of time if this process is disrupted in your washing “assistant”! In most cases, the washing machine that has powder left in it is working properly.

You could have made a simple mistake that caused a problem with the detergent:

  1. Low-quality powder or counterfeit powder is used The bad (and usually the cheapest) detergents stick to the dispenser due to the nature of their composition. In addition, such powders do not cope with their task and are harmful to health. Solution : change the powder.
  2. Excessive amount of detergent . When there is too much powder, the water does not have time to wash it out in the allotted time. Solution: Use powder measuring spoons and conditioner cups. Among other things, this is also a reasonable saving, because pouring powder and refilling conditioner is easy.
  3. Wrong choice of washing program. If the powder is poured into the pre-wash compartment, and the selected program does not require this mode, it will remain untouched and the laundry will remain dirty. Solution : carefully read the instructions for the washing machine and follow the rules described in it.
Rating
( 1 rating, average 4 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]