All methods of cleaning natural and artificial fur


At the end of the cold weather, fur clothes must be put away in the closet. But so that your favorite fur coat or hat does not lose its beautiful appearance, it needs to be cleaned. Many people do not know how to clean fur at home and take this problem to a dry cleaner.

But not everyone has the finances to afford this. That is why most women prefer to clean their fur items at home, using folk remedies. But how to clean a fur coat or blanket made of faux fur or natural sheepskin, mink, rabbit, etc.?

Ways to update the appearance of a fur product

If it is necessary to just slightly refresh a fur product, then there are several folk methods by which you can do this quickly and easily:

Using bran

  • Heat the wheat bran on a baking sheet or frying pan.
  • Distribute them over the fur item using rubbing movements.
  • Leave the fur coat in this condition for 15–20 minutes.
  • When the time is up, remove the bran and clean the fur.
  • This product is more suitable for products made from rabbit or sheepskin.

Hot sand

  • Place the fur coat on a flat surface.
  • Apply sand to it.
  • You need to rub it into your fur coat.
  • Remove dirty sand from the product. Carry out the procedure several times until the sand is clean.

Typically this remedy is used for silver fox or arctic fox.

Shampoo for cats

  • Dilute the shampoo in warm water and lather it.
  • Apply to the fur coat with a soft bristle brush or sponge.
  • It is necessary to rub the product into the pile of the product.
  • Leave the fur item in this condition for 3–5 minutes.
  • Rinse off the shampoo, being careful not to wet the skin to avoid cracking.

This product is excellent for products made from nutria, rabbit and chinchilla.

Birch sawdust

  1. Soak birch sawdust with turpentine, kerosene or gasoline.
  2. Distribute them throughout the product.
  3. Brush your fur coat.

Great for silver fox and rabbit.

Table vinegar and alcohol

  • Add vodka and 9% acetic acid and vodka to the water; the ingredients must be mixed in equal quantities.
  • Apply the resulting product to the fur using a soft product: a rag or sponge.
  • Immediately after this, remove the solution from the product with a napkin.

More suitable for chinchilla and nutria.

How to eliminate mink smell

Any fur is very hygroscopic. The pile absorbs any substances, including essential ones. Therefore, odors adhere well to the fur and last a long time.

You can eliminate odors using the following methods:

  • Aqueous solution of orange juice 1:1. It is better not to use this method on light furs. You need to wipe the fur with a swab with a solution, then walk over it with a damp brush and shake it off.
  • A bag of dry lavender. This method is suitable for fur of any color. The bag can be applied to the contaminated area or inserted into the product. Dry grass will absorb any smell, and lavender essential oils will give the fur coat a delicate aroma. It is also a good remedy for preventing moths.
  • Dry herbs. Instead of lavender, you can use other herbs with a gentle or neutral aroma: lemon balm, mint, lemongrass, tarragon or rosemary. Any dry grass will absorb the smell and give a delicate aroma to the fur coat.
  • Ground natural coffee. This product must be placed in a bag, which is hung next to the product or placed inside. However, you need to keep in mind that coffee will add a specific aroma to the product.
  • Regular tea. Loose leaf tea is best for this. It must be placed in a bag, which is placed next to the product or inside it. Tea will not add foreign odors to the fur, but will only remove existing ones.

We remove dirt from fur products

Quite often, on things made of natural fur, grease stains that are difficult to remove form. In order to get rid of them, you can go to a dry cleaner, but if you don’t have the money for that, then you can clean fur from stains at home:

Gasoline and starch

  • Mix starch and gasoline, beat the mixture until mushy.
  • Apply the resulting mixture to the resulting stain.
  • Let the mixture dry.
  • After this, clean the fur with a brush. If your fur coat has a long pile, then you need to brush according to the wool, if it is short - against it.

Liquid for washing woolen items

  • Take 1 tbsp. spoon of wool detergent and dilute it in 250 ml of water.
  • Apply the product to the grease stain and work it with a brush.
  • Remove any remaining residue using a paper napkin.

Chalk

  • Crush the chalk until it becomes powdery.
  • Sprinkle it onto the stain.
  • Wash your fur in a gentle manner. It is better to wash without using a washing machine.
  • Remove any remaining product with a brush.

Salt and ammonia

  1. Dissolve 3–4 teaspoons of table salt and 1 teaspoon of ammonia in 0.5 ml of warm water.
  2. Apply the solution to the stain.
  3. Leave for 15 minutes.
  4. Remove the product thoroughly with a damp cloth or napkin.

Rules for caring for a mink coat

In order for fur to last longer, you need to know the basic requirements for caring for it.

Clothes should be stored in a moth-proof place, covered with a cover. If in doubt, pest control products should be used.

Do not leave the product in a horizontal position. Otherwise, the mink will quickly dry out.

If cleaning at home is impossible or difficult, it is better to take your fur coat to the dry cleaner. It is necessary to use the services of only trusted companies with a good reputation. The service life of the product allows you to use the services of this household sector no more than 6 times. With this type of treatment, aggressive compounds and fur cleaning products are used.

The mink needs to be cleaned regularly using special substances. All rules for processing products made from it should be carefully followed.

You need to dry your fur coat in the open air, placing it on hangers. In addition, regular ventilation is necessary. In winter, clothes must be taken out to the balcony at least 2 times a season.

Adding shine to fur

How to clean mink or arctic fox fur if it has lost its former shine? In order to return a fur coat or hat made of natural fur to its previous condition: rabbit, silver fox, chinchilla or sheepskin, you can use folk remedies that will solve your problems not only in, for example, how to clean the fur of an arctic fox, but also of any other animal.

Alcohol and ammonia

  1. Mix table vinegar and citric acid in a 1:1 ratio.
  2. Treat the fur.
  3. Let sit for 10 minutes.
  4. Remove the product thoroughly.

Fish fat

  1. To 1 liter of boiling water, add: 10–12 drops of ammonia, 100 grams of fish oil and 10 grams of dark laundry soap.
  2. Cool the solution to 30–35 degrees.
  3. Apply the solution to the fur.
  4. Leave for 5-10 minutes.
  5. Remove any remaining product.

How to remove dust and light dirt

If your fur clothing is dusty, you can quickly fix this problem by following these simple steps:

  1. Lightly wet a white cotton sheet and spread it on any flat surface - a table, bed or floor.
  2. Place the fur coat evenly on the fabric, nap side down.
  3. Using a carpet tool or rolling pin, knock out all the dust with small taps.
  4. Afterwards, hang the fur coat on a hanger or hanger, dry it a little, but avoid direct sunlight, and comb the fur.

If your favorite outerwear is slightly dirty, then a solution prepared from a mixture of the following substances will help restore it to cleanliness:

  • 2 tsp. alcohol;
  • 1 tsp. table vinegar;
  • 100 ml water.

Wipe the contaminated areas with a soft sponge or clean cloth soaked in the product. After drying, ventilate the product to remove the smell of vinegar, and comb. To prevent the fur's pile from sticking together, lightly run a steamer over it before you start working with the comb.

Please note that this solution is not recommended for use on faux fur items.

Tip : to reduce dust on your fur coat, store it in a special clothing case.

How to clean faux fur

If your fur coat is not made from natural silver fox, chinchilla or mink hair, the question of how to clean faux fur does not disappear. When cleaning a blanket or faux fur coat, you must act carefully. There are several rules for caring for such things:

  • If you store things incorrectly, they will become deformed and fade. If a fur coat or blanket has become dull, you can, of course, dye it, but it’s easy to do without it if you don’t: wring it out after washing, store it folded.
  • When washing or cleaning, it is prohibited to use aggressive bleaching agents to avoid damage to the fur.
  • Some faux fur contains a large amount of synthetics, which tends to deform during prolonged contact with water, so it is not recommended to wash such things.

When to clean your fur coat

Fur coat cleaning is usually scheduled for the end of the season, but sometimes outerwear may need to be cared for earlier. The following are signs of contaminated fur:

  1. Lack of shine. The very first “bell” is the disappearance of the characteristic shine of the product. This indicates dust has settled and a layer of dirt is forming on clothing.
  2. Loss of color brightness. Natural fur may look pale. Darker or lighter areas may appear.
  3. Entanglement. Knots and creases in a fur coat require immediate action. If cleaning is not carried out on time, the fur will completely deteriorate.
  4. Oily deposits or stains. Often the symptom is accompanied by the appearance of an unpleasant odor.
  5. Debris in the lower layer of fur. Often, owners of mink or mouton complain about some kind of “dandruff” on the product.

How to wash faux fur

There are situations when simply cleaning the fur does not help to deal with stains, and then the question arises: is it possible to wash the fur? The answer is yes, but not all such products are recommended to be washed. Some blankets, hats and fur coats contain a large amount of synthetics, for which prolonged exposure to moisture has a detrimental effect, the item becomes dull and deformed.

You can paint a thing if it loses its color, but if it loses its shape, this is unlikely to help.

On fur products, there is always a label that says whether faux fur can be washed or not, and at what temperature. If it is allowed, then it must be carried out according to certain rules that say how to wash faux fur.

Things made of dark fur deserve special attention, because they tend to shed. So that you don’t have to look for a product that can be used to dye your favorite fur coat, it is enough to follow the basic rules for caring for fur items.

Cleaning your fur coat from dust with your own hands

After being in the closet, even if there is a cover, the fur coat becomes dusty. To clean a fur coat from dust, you need to gently shake or beat it.

Some people clean it using a vacuum cleaner, but this is not the best option, because... direct air flows are undesirable for the pile.

It is excellent to clean a fur coat using a coarse brush for the hair of cats or dogs. A similar metal comb is available in every pet store, so if you have a fur product, buy this accessory.

It is important to comb your fur coat at least 2 times a month, because any fur and pile require careful care.

Hand wash faux fur

There are certain rules that say how to wash faux fur by hand.

  • Fill a large basin with water so that the fur fits into it without kinks. The liquid temperature should be no more than 40 degrees.
  • Add detergent. When washing with powder, it must be stirred until completely dissolved so that there are no problems when washing the powder out of the fur.
  • Immerse the item in the prepared product and leave for 20–30 minutes. If the fur is heavily soiled from the inside or outside, you can clean the fur with a brush, but it is not recommended to use excessive force.
  • At the end of the time, the water must be drained and fresh water added, adding 1 teaspoon of vinegar to it to add shine. Rinse the item in this water, rinse with running water.
  • The item cannot be wrung out; it must be laid out on a flat surface or placed on a hanger, the water will drain by itself.
  • Fluff and comb the fur while drying.

What not to do

In order not to spoil expensive fur, a number of important conditions should be taken into account.

  1. White mink is not cleaned with potato starch. It can leave stains on it.
  2. To treat a fur coat, you need to use special fur products. Don't use cheap laundry detergent. It is not recommended to rub dirt with force.
  3. Odors should not be removed with deodorants, cosmetic solutions, or perfumes. Dust must not be removed with a vacuum cleaner. Fur items should not be placed in the washing machine.
  4. It is not allowed to iron the outside or inside of a mink coat with an iron.
  5. It is not advisable to clean such clothes constantly. The treatment must be carried out when it is heavily soiled, otherwise the pile will quickly dry out.
  6. Do not dry fur over a central heating radiator or over an open fire. Do not leave the product in a closed bathroom overnight. A hair dryer is not suitable for use on wet hair.

Cleaning faux fur

There are several ways to clean faux fur:

Dish soap and starch

  • It is necessary to mix until smooth: starch , dish soap and washing powder . Portions of ingredients should be equal .
  • Apply the mixture to the stain.
  • The product must dry.
  • Shake the item, and then treat it with a comb with infrequent teeth.

Fabric soaked in gasoline

  • Soak the fabric in gasoline.
  • Check in an inconspicuous place how the product affects the fur.
  • Wipe the stain with this rag.
  • Treat the area with a damp sponge.

Methods and recipes for cleaning mink products

When cleaning a fur coat, it is important to remember that any careless action will lead to damage to the clothing. You cannot wash your fur coat; it will shrink and shrink in size. Mink coats can be cleaned in two ways: wet and dry.

In this case, funds are used that are always available in the house.

Mink coats can be cleaned in two ways: wet and dry. In this case, funds that are always available in the house are used.

Wet cleaning: features and recommendations

Wet cleaning a mink coat is a more effective method suitable for removing deep dirty stains. Before cleaning, the mink coat is placed on hangers in a vertical position. After cleaning the fur coat, you need to comb it with a special brush and let it dry.

When drying, do not use a hairdryer or iron!

Shampoo, gel, soap solution

Heated soapy water is one of the common methods for cleaning mink. The number of components is taken from the calculation of the volume of the fur coat. The longer and larger the fur coat, the more solution you need to clean it. Dissolve 100 ml in a bowl of warm water. shampoo, shower gel or regular laundry soap. Moisten a sponge in the solution and gently wipe the hairs of the fur coat with it, from root to tip. You can fix pieces of cotton wool on the teeth of a comb, and, dipping it in the solution, comb your fur coat.

Vinegar and hydrogen peroxide

5% vinegar cleans mink very well from dirt and restores its original shine. If you need to tidy up a white fur coat, then replace the vinegar with hydrogen peroxide.

Petrol

Aviation gasoline or lighter gasoline is used to clean the collar, as it gets dirty faster than other areas of clothing. Traces of perfume, creams, and lipstick often remain on the collar, which are very difficult to remove. Gasoline is mixed with burnt magnesia, which can be purchased at a pharmacy, to a mushy mass. Apply the paste to the contaminated area and rub against the lint. After drying, comb the fur thoroughly and wipe with 5% vinegar.

You cannot clean light fur with gasoline, otherwise it will turn yellow!

Ammonia+salt

In a glass of warm water, dilute a tablespoon of table salt until completely dissolved, add half a teaspoon of ammonia. Soak a soft cloth or gauze in the mixture and use pressure to clean the fur coat.

Alcohol or vodka

In the following way, the fur coat is cleaned from dirt and dust; in addition, after treatment with alcohol, the former shine returns. Add 5-6 drops of alcohol and 1 drop of cleaning agent to half a glass of hot water. Mix the mixture thoroughly, then use a cotton swab dipped in it to clean the fur coat in the direction of the pile.

Dry cleaning

This is a more gentle cleaning method, suitable for removing shallow dirt.

Starch

Place the fur coat on a smooth, flat surface, for example, on a table. Then sprinkle with potato starch and thoroughly rub the surface of the fur coat with it. If the starch becomes dark, repeat the procedure. After treatment, shake off the fur coat well.

Talc or tooth powder

Tooth powder, talcum powder, or regular baby powder are excellent products for cleaning mink fur at home. Clean with tooth powder in the same way as with starch.

Sawdust

The pet store sells sawdust from hardwood trees. A small amount of them needs to be mixed with regular clean gasoline. Apply the mixture to the fur, rub it with your hands, then shake it off, comb the fur and treat it with vinegar.

Semolina

Semolina is used to clean a fur coat in the same way as starch, but there is another cleaning method. Boil a tablespoon of semolina in a glass of milk. Apply the cooled porridge to the fur coat in a thin and even layer and leave for 6 hours. After this, it is good to clean the fur coat of semolina, comb it and dry it at room temperature.

Hot sand

Heat fine, well-sifted sand and then pour it onto the fur. Rub with your hands, remembering to replace dirty sand with clean sand. Repeat the procedure until the fur coat is clean.

How to clean white fur

Self-cleaning fur on light-colored items is only necessary if yellowness appears on the fur. Many women, faced with this problem, do not know how to clean white fur correctly. In order to remove the yellow spots that have formed on a fur coat or hat with a pompom, there are a lot of folk methods using improvised means:

Hydrogen peroxide

  • Add 10 ml of hydrogen peroxide to 0.5 liters of water.
  • Pour the resulting mixture into a spray bottle.
  • Spray the product on the stain or the entire surface of the item, depending on the scale of the problem.
  • Take the product outdoors.
  • After it dries, comb the pile with a comb.

Alcohol and soda

  • In 300 ml of water, add 5 ml of alcohol and 15 grams of soda.
  • Soak a brush or sponge with the resulting solution.
  • Treat the surface of the blanket or fur coat.
  • Dry the item.

Alcohol and glycerin

  • It is necessary to add 100 ml of vodka and 5 drops of glycerin to 0.5 liters.
  • Pour the product into a spray bottle and use it to spray the mixture onto the pile.
  • Treat the surface of the blanket or fur coat with a soft brush.
  • Dry the item.

How to clean a fur coat - choice of products

To properly clean a fur coat at home, you need to determine the type of fur, assess the degree of contamination, and select a high-quality and safe product that will deal with stains without harming the material.

On sale you can find cleaning sprays, foams, shampoos, and wet wipes from popular brands:

  • Biofur.
  • Ultra finish milk.
  • Insaf.
  • Salamander.
  • Living licker konz.
  • Terre de sommieres powder.


Insaf


Salamander


Sommieres powder


Biofur

Before use, you should carefully study the instructions, do a test on an inconspicuous area and strictly follow the dosage.

Ready-made cleaning products remove dirt, restore lint, and contain antistatic agents and caring components that protect it from external influences.

Home remedies for cleaning fur coats from stains, street dust and dirt are also effective, but are more aggressive and can damage the material if the dosage is not followed. They must be used in strict accordance with the recommended proportions, and do not mix with each other.

Table - home remedies for cleaning fur coats.

ViewMeans
Solutions
  • Vinegar.
  • Shampoo for animals.
  • Vodka.
  • Hydrogen peroxide.
  • Liquid for carpets.
  • Ammonia.
Absorbents
  • Baking soda.
  • Talc.
  • Semolina.
  • Starch.
  • Baby powder.
  • Wood sawdust.
  • Sharp.
Household appliances and tools
  • Steam cleaner.
  • Clothes brush with soft bristles.
  • Pet comb (“slicker”) with metal teeth.

When using homemade recipes, you need to take into account the type and color of the fur so as not to damage the structure of the pile or its color.

How to clean a fur collar at home

Owners of beautiful fur coats or hats with a fluffy pompom: nutria, silver fox, chinchilla rabbit, mink, etc., are faced with the problem of how to clean a fur collar, because it is often the one that gets dirty the fastest. Before you start cleaning the fur on the collar, you need to determine the type of contamination. If there are greasy stains on the product, it is better to resort to dry cleaning.

For light-colored items, it is better to use dry cleaning.

Talc

  • Unfasten the collar and lay it on a straight surface.
  • Apply the product to the collar or hood.
  • With dry hands, spread the powder over the entire area of ​​the product.
  • Leave for 15–20 minutes
  • Shake off the product and let the collar or hood air out.

This cleaning method is suitable for light fur of a fox, arctic fox rabbit or mink.

Some useful tips

  • It is highly not recommended to clean mouton fur with undiluted vinegar or acetone.
  • If the fur coat is wet, you only need to sew it in a natural way. The use of electrical appliances will damage the fur, deform it and possibly discolor the product.
  • Spraying perfume on a mouton has a detrimental effect, along with hairspray.
  • You definitely cannot wash a fur coat in a washing machine.
  • After cleaning has been carried out in any way, the fur coat must be combed with a brush.
  • Unless absolutely necessary, you should not apply any kind of cleaning to a mouton fur coat.

How to wash a dark fur collar

Dark things tend to fade and so that you don’t have to think about how to paint the item later, it is better to clean the collar or pom-pom on the hat using the right products:

  • Dissolve 1 tbsp in a liter of water. spoon of shampoo.
  • Using a sponge, apply the product to the pile of your collar.
  • After 15 minutes, rinse the item in warm water.
  • Lay the collar on the fabric.
  • Brush the collar while drying.

The product is excellent for hoods and collars made of dark fur: silver fox and chinchilla. The mixture will retain the color and you won’t have to think about how to dye your collar or hat with a pompom.

General recommendations

Most often, simple stains occur on the lining; the most common is the smell of sweat or minor stains. In order to properly clean the product and not spoil it, you first need to study the available labels, on which the manufacturer clearly indicates the most acceptable temperatures and recommends products. Only after studying this information can you begin further cleaning

In addition, it is important to determine the origin of the fur itself; artificial fur is subject to one type of washing, while natural fur is cleaned completely differently. The following general recommendations will be:

  • Before cleaning, you should carefully inspect the underlay; any detected stains and complex contaminants are removed before washing;
  • washing is carried out at a temperature not exceeding 40 degrees;
  • It is better to use liquid detergents; powder detergents are less easily washed out of the fibers;
  • It is advisable to use an additional rinse both when washing by hand and when cleaning in a machine;
  • It is advisable to squeeze the product only slightly; twisting it by hand can contribute to deformation;
  • It is not advisable to use chlorine-containing products to remove stains.

In the washing machine, cleaning is carried out with a minimum spin on a delicate cycle.

How to wash a fur collar with long pile

Fur items with long pile need to be washed with greater care; in no case should you use detergents containing chlorine

  • Dilute soap solution in water.
  • Dip the item into the liquid.
  • Leave the collar in the water for half an hour.
  • At the end of the time, rinse the product.
  • Dry the collar; it needs to be combed from time to time.

Knowing these basic folk recipes, you won’t have to look for advice on how to wash fur or how to dye it if it has faded during wear.

Where can I dry clean my fur coat?

Dry cleaning is an establishment that specializes in fur cleaning. In addition to the fact that the specialists of this establishment will not only help you clean the fur of your fur coat, they will also bring it back in order: they will repair the product and paint it (if necessary). Here you can leave your fur coat for storage.

A professional dry cleaner should have an ironing machine at their disposal to smooth out the fur. But since this equipment is quite expensive, every establishment can afford to purchase it. In principle, the presence of an ironing machine indicates that the establishment receives a lot of orders and values ​​​​its reputation, because the product must be returned to you not only in its pure form. It must be wearable and look well-groomed.

In big cities, in addition to dry cleaners, there are ateliers and fur salons that sew fur clothes. They can also offer you dry cleaning services for the product.

Removing dirt and stains

If severe stains or dirt appear on the mouton coat, they can be dealt with in the following ways:

  1. You can eliminate the problem of greasy stains with powder and shampoo. These products are combined in any suitable container and then applied to the contaminated area. After 10-15 minutes, the remaining composition should be washed off with a clean piece of cloth.
  2. Dirt stains are removed with ammonia and salt. A cotton pad is soaked in the solution, after which the stains are wiped with it.
  3. To remove dirty stains, it is allowed to use a mixture of alcohol, vinegar and water, combined in equal proportions. The product is applied to the pile using a kitchen sponge or brush, and then washed with a paper towel.
  4. Areas with heavy contamination are treated with a cotton swab soaked in gasoline. To remove unpleasant odors from the fuel mixture, you need to sprinkle the area with corn or potato starch. The composition is rubbed into the fur and then removed with a damp cloth.
  5. You can get rid of dirt with simple bran. They need to be heated in a frying pan and applied to problem areas of the fur coat. The bran particles must completely absorb contaminants. After processing, they should be shaken and the fur combed with a special brush. Sawdust can be used as an alternative for bran. They are available in pet stores and do not leave marks on the fur coat.

If you have difficult stains from chocolate or alcoholic drinks, it is better to contact a dry cleaner.

Rating
( 2 ratings, average 4.5 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]