How to clean an electronic cigarette: methods for cleaning an atomizer, clearomizer

In connection with the popularization of a healthy lifestyle, many smokers decided to quit smoking and, in order to reduce the intensity of manifestations of harmful addiction, replaced regular cigarettes with electronic ones. Unlike classic cigarettes, the electronic device is reusable and requires special care; you need to regularly clean the electronic cigarette and charge its battery. If cleaning is carried out incorrectly or not at all, the quality of the generated vapor will be reduced, and if the device’s battery is discharged, it will not be possible to satisfy the need for nicotine at all.

How to clean your vape from old liquid​​

Those who use electronic cigarettes need to understand the nuances of caring for these devices. Cleaning the vape is a very important point, allowing not only to ensure high-quality vaping with excellent taste, but also a long service life of the gadget.

Appearance of pod Renova Zero

All sorts of color options for renova zero, including a unique skeleton and a bloody theme.

The Renova Zero body itself is made of aluminum, which makes the device pleasant to the touch with a soft-touch coating that does not leave fingerprints. Manufacturers chose for their device something between “pebbles” and penstyle.

Everything on the outside has no sharp edges, all the edges have a rounded shape, which gives one minor drawback - by touch it is difficult to determine where the top is and where the devices are. Due to its small dimensions, it can be easily put in your pocket and weighs very minimally.

On the front of the pod there is a name, and at the bottom there is a connector for charging the battery via a USB cable. Also located at the bottom is a mode switching button and an indicator light. The LED indicator shows not only the charge level, but also the mode to which the pod is configured.

There are plastic inserts on both sides, at first glance one might assume that these are LEDs, but no, just an addition for a beautiful look.

The company released vaporesso renova zero in 12 colors and added 2 more original ones - a bloody theme and in the form of a skeleton. If you want to make your device unique, you can buy stylish stickers for it.

Need for cleaning

In most cases, vaping helps people quit smoking regular cigarettes, and subsequently overcome nicotine addiction. Sooner or later, vapers have a question: how and why to clean electronics?

There is a heating coil inside the device that regularly comes into contact with the vape liquid. This inevitably leads to the fact that it is gradually covered with soot. This affects vaping, causing the following changes:

• The taste and smell of the generated steam changes;
• Steam generation becomes difficult;
• Liquid may leak out and enter the battery, which subsequently leads to breakdown of the power source;
• The service life of the atomizer and the device itself is reduced.

Knowing how to clean an electronic cigarette is also a good idea for those who like to experiment with vaping liquids, often changing flavors. If you do not rinse the cartridge when changing, the old mixture may negatively affect the development of the new taste.

Removing carbon deposits

You can get rid of the unpleasant smell of the steam mixture if you clean the structural elements from carbon deposits. Follow all steps carefully and take your time:

1. First, the device must be completely cooled.
2. Then prepare a solution of alcohol and water, disassemble the atomizer and place the coil in the liquid for 2-3 hours.
3. Now you can remove the carbon deposits using a small needle.
4. When the plaque is cleared, the atomizer should be blown out.
5. The heating element and atomizer are wiped from the inside with a lint-free cloth.

When the structure is completely dry, it is assembled to its original state. Then you need to conduct a test using a smoking mixture. If the problem persists, you should think about changing your e-liquid.

How often should you clean your vape?

Experts say that cleaning should be done after 2-3 thousand puffs. Naturally, few people will count, so you can focus on the following points:

• Vaping becomes difficult;
• The volume of steam produced decreases sharply;
• There is a taste of burning and other tastes and aromas;
• An atomizer leak has been detected.

If such changes occur, it is necessary to rinse the vape. This needs to be done correctly.

Specifications of Vaporesso Renova Zero Pod Kit

The coating of the hearth is very, very pleasant to the touch. Hold this once and you won’t want to let go!

If you look at the main characteristics of the Vaporesso Renova Zero, it is quite standard for such devices, however, it has several pleasant differences;

• Size – 31mm x 13.5mm x 80.2mm;
• Weight – 50 g;
• Tank volume – 2 ml;
• Resistance – 1 Ohm;
• Adjustable power from 9 to 12.5 Watts;
• Battery capacity – 650 mAh;
• Charge current is 1A, there is a fast charging function;
• Cartridges with convenient refilling;
• Omni Board Mini with temperature control;
• CCELL ceramic evaporator designed for salt liquids;
• Control button;
• Soaring mode – pastru;
• Protection: from low voltage and resistance, from burning and overcharging, from short circuit and from cutoff.

How to clean your vape?

When it comes to cleaning a vape, this means rinsing the tank and drip. There are several ways to do this. It is worth considering the most popular of them:

1. Soaking in water. The easiest way. First of all, you need to disassemble the tank. It is best to remove the o-rings, which absorb odor well. Take a bowl and fill it with water. Place in the microwave for a couple of minutes to warm up the water. Rinse large parts under running water. Next, the deli are placed in heated water and remain there until it cools down. Then you need to rinse them again under the tap.
2. Soaking in propylene glycol or glycerin. Used for deeper cleaning. Place the parts in the liquid for half an hour, after which you need to give them time to dry. When using glycerin, it is worth leaving them for longer, since it has a higher density. Allows you to eliminate strong odors.

3. 
   Alcohol, vinegar and baking soda. Almost everyone has these ingredients at home. Used separately from each other. The parts should be wiped with alcohol or soaked for a while. Baking soda diluted in water is a wonderful cleaning agent. Vinegar is also effective, but parts must be rinsed after use to remove the odor.

4. Ultrasonic bath. An effective method, but it is more advisable to buy if you have several devices.

Important! If you do not clean your electronic cigarette in a timely manner, this will negatively affect the quality of vaping and may cause the gadget to break down. It is worth taking a responsible approach to caring for the device, which will significantly extend its service life. In a situation where you do not want to do this yourself, you can entrust the work to professionals.

Source

Renova Zero does not respond to tightening

View of the internal contacts of the cartridge and Renova zero battery pack.

Perhaps one of the most common problems with pod systems is that the device does not respond to tightening. Renova zero also did not come without such a small trouble, but do not be upset in advance, since everything can be quickly fixed.

If vaporesso renova zero does not respond to tightening, then first of all, you need to disassemble the electronics.

The problem may be as follows. Firstly, liquid spilled inside the device and it flowed onto the contacts. If you look at the cartridge from below, you will see 2 contacts there, the same ones are on the Renova Zero body. You just need to clean them and everything should work.

Secondly, liquid could have poured into the inside of the hearth and flooded the board, then the problem is more significant and if disassembling the vape and cleaning it does not help, then it is better to contact a specialist for help.

Is it possible to wash the evaporator with water?

When buying fashionable electronic smoking gadgets, you should remember that they all require careful care. Without knowing how to clean an electronic cigarette, after a while you may encounter many problems in using the device, even complete breakdown. To avoid this, we offer you simple tips on how to care for your electronic cigarette so that it lasts you a long time. In our article we will analyze all the nuances, tell you how to wash the evaporator of an electronic cigarette, how to wash different models of devices, and also give useful tips on how to extend the life and quality operation of the device.

Equipment for Renova Zero

This is what a complete Renova Zero kit looks like when purchased.

I hope we all understand that it is now problematic to come up with something unique for pod systems, so when you buy Renova zero you get a completely standard set that will allow you to use the device immediately after purchase without any problems. The kit includes:

• Renova zero pod kit;
• Cartridge;
• A jar with a thin spout for refilling a 10 ml cartridge;
• USB charging cable;
• User guide;
• Warranty card.

Consequences of improper care

Are electronic cigarettes just a fad or the way of smoking of the future? Be that as it may, today many smokers are switching to electronic devices. Pleasant draft, aromatic vapor that does not make those around you wince, no need to shake off the ashes - these and other advantages make them a profitable alternative to regular tobacco.

E-cigarettes are refillable devices, and there are both pros and cons to that. Among the disadvantages is the fact that the device requires careful handling, as well as timely cleaning. But why and what do you need to clean a seemingly simple device? Let's briefly consider the principle of operation of e-cigarettes. There is a heating element inside the device that causes the aromatic liquid to evaporate. Over time, this element becomes covered with soot. So, if you use your e-cigarette for a long time and never clean it, you may encounter the following problems:

• reduction in the volume of steam or its complete cessation;
• difficulty traction;
• the appearance of foreign tastes or a burnt taste.

Harm to health of logic compact

To figure out whether smoking Logic is harmful, you need to know what salt nicotine is. After all, this is what the cartridges are refilled with.

Salt nicotine is made artificially on the basis of free nicotine with the addition of salts. Just don’t immediately think that impurities in a liquid mean harm. On the contrary, salts in the liquid bring its acidity to the level of water. And this makes it safer.

This acidity is close to human, which allows the body, when inhaling, to quickly absorb all the components of the vapor and also quickly remove them. For this reason, satiation from salt nicotine comes very quickly, since our body quickly absorbs salts.

Nowadays, it is extremely difficult to say whether smoking e-cigarettes is harmful or not, since long-term studies simply do not exist. Vapes have recently appeared on sale.

It's safe to say that vaping is harmful. It's just that the effect on the lungs is different.

Is it possible to quit smoking with logic compact

If you are a heavy cigarette smoker and want to get rid of this bad habit, then Logic will help you quit smoking. If the option with logic is not suitable, then you can take a closer look at pons or elf bar rf350. Similar pods with essentially the same characteristics.

Tobacco addiction occurs when the body stops independently producing the chemical elements that nicotine contains. Logic e-liquids contain the same nicotine that will become a safer alternative to tobacco cigarettes.

But don’t forget that no device will help you completely quit smoking if you don’t have your own desire to get rid of this habit.

How to clean an electronic cigarette

First, let's look at the general rules that must be taken into account before cleaning any electronic cigarette:

1. Do not wash a hot cigarette. If you feel a burning taste while smoking, you don’t need to immediately rush to the bathroom to wash the device. Let it cool before cleaning the carbon deposits from your e-cigarette coil.
2. Do not boil your e-cigarette. You can find advice on boiling the device on the Internet, but following them will most likely lead to irreversible damage.

So, you're about to clean your cigarette for the first time. Where to begin? First of all, the cooled device needs to be disassembled. Often, electronic cigarettes consist of three parts - a cartridge, an atomizer and a battery. Currently, more advanced devices with a clearomizer and cartomizer have also appeared.

Cigarettes with a cartomizer consist of only two parts - the battery and the cartomizer itself, which contains the atomizer and cartridge. Devices with a clearomizer require a battery and a transparent clearomizer in the device. The latter combines an evaporator and a cartridge.

In order to clean a classic e-cigarette, you need to separate the atomizer and blow it out. This way you will remove any remaining aromatic liquid. How to clean the atomizer? It must be rinsed thoroughly under running warm water for 10-15 minutes. There is no need to make the pressure too powerful so as not to accidentally damage the element.

After washing, the atomizer should be blown out again and left until completely dry. Some people recommend speeding up the blow-drying process, but you also need to be careful when choosing the temperature setting. Only after the part has completely dried can the cigarette be reassembled and used for its intended purpose.

If this method does not solve your problems, try soaking the atomizer in warm water or cleaning fluid. It will be effective to leave it in the bath overnight and rinse thoroughly in the morning.

The cleaning liquid can be ethyl alcohol (vodka), Pepsi or cola, an aqueous solution of vinegar or citric acid.

You should not use dishwashing liquid or soap for this purpose, otherwise you will have to throw away the cigarette.

After soaking, cleaning the atomizer will be a simple task - the remaining plaque can be easily removed with a cotton swab. After washing the part again and drying it thoroughly, you can assemble the electronic cigarette, refill it and smoke.

If nothing helps at all, only radical methods remain, such as changing the evaporator or purchasing a new device.

How often should you wash your e-cigarette? Of course, you shouldn’t wait until the smoke becomes extremely bitter; it’s better to regularly carry out preventive cleanings. Typically, electronic gadgets are washed once every two to three months - this will significantly increase the life of the cigarette and allow you to enjoy aromatic smoke without any foreign flavors.

Instructions for unscrewing the tank

If the tank does not unscrew, then the problem is solved by performing the following manipulations:

1. Stop the base without applying any force, as the glass may crack and will not be suitable for further use. Make this with some thin object that will fit into the air vent. This way you will fix the body;
2. Using rubber gloves or a thin rubber mat, unscrew the evaporator, glass or drip tip so that your fingers do not roll over the body of the device;
3. Wrap the glass in a couple of layers with electrical tape or adhesive tape so that the glass is not deformed with pliers if you are unable to remove the clearomizer by hand;
4. Use a wet cloth/thin stream from the tap to rinse the joints and clean the threads. If there are no liquid residues on the fasteners, then everything was done correctly. It is better not to refuel the e-cigar while unwinding the tank;
5. Unscrew the remaining parts and wash them thoroughly;
6. Install the glass several times, clean parts will not leak.

Prevention of contamination and damage

Care and regular cleaning of your e-cigarette can extend its lifespan. In order for the device to delight you with aromatic smoke for a long time and with high quality, follow a few simple rules:

• Read the instructions before changing parts of the device.
• Purchase refill fluids, as well as other components, only from trusted places. The seller must have the appropriate license for the product.
• Clean your cigarette regularly—every two to three months. It is also recommended to clean the cartridge every time before changing the flavor of the liquid so that different flavors do not mix.
• Do not add too much liquid for refilling.
• While smoking, do not take too deep breaths to prevent the device from overheating, otherwise the vaporizer in the e-cigarette may need to be replaced.
• Do not use your e-cigarette in cold weather.
• Keep the device charged as much as possible.

As you can see, caring for an electronic cigarette is not that difficult. It is enough to use a few simple tips, and a regularly serviced electronic gadget will not create problems.

We hope that our article helped you get answers to many questions - how to clean the vaporizer, how to handle different types of e-cigarettes, how to care for your device.

The evaporator is the most important part of the electronic cigarette, which is responsible for the formation of vapor. This is the main consumable that a steamer needs. Before using for the first time, allow a few minutes for the vaporizer to soak in the liquid. This will help prevent the wick from burning prematurely. The process of changing the taste of a liquid does not require special manipulations, such as flushing the evaporator. It is enough just to drain one e-liquid and pour in a new one, after a while you will get steam with new taste qualities.

When using an electronic cigarette, it is important to follow basic operating rules to protect the device from premature contamination and damage:

• read the instructions carefully;
• purchase high-quality liquids for refilling only in specialized stores;
• do not pour excessive amounts of liquid into the device;
• do not take excessively deep breaths when inhaling to avoid overheating;
• pause between puffs so as not to burn the cotton;
• Avoid use in cold weather.

But even in this case, the evaporator sooner or later fails. Depending on the intensity of use, it can give you about 2 weeks of quality vaping.

Flavorings included in vaping mixtures often form a coating on the coils. If you feel an unpleasant taste and smell of burning, it means that carbon deposits have formed on the coil. The draft may also deteriorate, steam production may decrease, or the power supply may overheat. In these cases, the evaporator must be immediately replaced with a new one.

The evaporative elements presented below differ from others in their increased service life. According to reviews on our site, they last a little longer than others in their lines:

Eleaf EC Replacement Evaporator – Ceramic Head

is an evaporative component based on ceramics. The advantages of the material are that it does not overheat the cotton, preventing it from burning. Ceramic improves the taste of steam and can work twice as long as a metal coil.

Replacement evaporator SMOK V12 Prince-M4

operates at a power of up to 70W, which guarantees excellent flavor transfer and a fairly large amount of steam. The replacement element is designed to replace the complete coil. You can buy an original evaporator for an atomizer from us at a reasonable cost.

Renova Zero cartridges

This is exactly how the Renova Zero cartridge is refilled. By the way, very convenient!

It was a completely logical decision from the developers to use a replaceable cartridge, and the refill they made for it was absolutely superb. The cartridge itself is held in place by magnets, although there is still a small loop left, that is, it is not held very tightly.

The cartridge itself uses a ceramic heater with a maximum resistance of 1 ohm. Due to this, the vaper receives excellent flavor transfer, and the service life is significantly longer than that of standard coils.

And a few words about refilling the cartridge. At the bottom there is a small hole with a check valve. So a bottle with a long spout is the best option, apply a little pressure and pour the liquid into a 2 ml reservoir.

Cartridge with Renova Zero cotton wool

This is what the cartridge looks like from below.

Let's now look at the cartridge for Renoza zero with cotton wool. You can also insert a cartridge with a mesh, but more on that later.

And so, the cartridge itself is made of dark, but still slightly transparent plastic. At the bottom of it you will notice a metal plate that goes in a circle, and a little higher there will be the inscription ZERO, it will be on a ceramic cartridge with a vertical coil.

Can you wash your vape?

Any vaper can take care of a vape, because it is not a complicated process at all. It is enough to follow a few rules. First of all, disassemble the electronic cigarette into its main parts. The vape can be washed, but only the atomizer. The battery part should simply be wiped with a soft cloth or a special cloth for electronics. To wash the atomizer, use warm soapy water or a special cleaning liquid. Cleaning it requires several steps:

1. Disassembly – disassemble the vape tank into its main parts to ensure access to water. Unscrew the base and top cap, remove the stem and evaporator.
2. Rinsing - under running warm water or in a bath. The second method is preferable, but takes longer. Don't forget to remove the evaporator/wick. It is prohibited to get it wet. Serviced tanks can be soaked directly with spirals. It is convenient to use a soft toothbrush for cleaning.
3. Blowing - After washing, blow all parts to remove any remaining dirt. You can use cotton swabs or pads for a more thorough cleaning.
4. Drying – to quickly dry all the parts, you can use a hair dryer. If there is no need to rush, the vape parts can dry out on their own. Leave them upright on a napkin.
5. Collection - wipe the threads of all parts and the mouthpiece with a dry or alcohol-soaked cloth. This will ensure good conductivity and correct operation of the device. Also, do not forget to “burn” the coils thoroughly before forming the wick if you are using a serviced model.

Other options for unscrewing the tank

Thanks to special substances, it is possible to disconnect the atomizer from the base or the tank from the evaporator. In the process of active vaping, so-called gars are formed inside. Because of them, the components of the liquid boil, which settle tightly on the thread and do not solidify.

WD-40 is a substance that is sold at hardware stores. This composition must be dripped onto the thread through the air duct or hole for vaping the puff. Then you need to wait 5-10 minutes for the plaque to dissolve. Then rinse the vape to remove any remaining WD-40. The mobility of parts is guaranteed to increase.

It is impossible to repair cracked glass. In addition, with constant unscrewing/twisting, the crack only increases in volume. To avoid the cost of purchasing a new electronic device, it is more rational to clean your device after every 2-3 refills.

How often to clean your clearomizer

To enjoy thick clouds of vapor with excellent flavor, you should clean your vape regularly. Do not wait for an interruption in its operation or the appearance of a foreign taste. Make it a habit to clean your clearomizer every time you replace the evaporator. Or at least once a month. Wipe the threads and mouthpiece thoroughly before each refill or once every 2-3 days. This will ensure good nutrition, air flow and vaporization. You can also wash your vape before refilling it with new liquid. By cleaning the reservoir and replacing the wick, you will ensure better flavor transfer.

Please note once again that the evaporator and battery part should not be washed in water under any circumstances! Remember that proper care of your electronic cigarette and careful use guarantees excellent vapor production and reliable service of your device.

Source

Renova Zero button control

This is how the control button turns red.

As stated earlier. Manufacturers have added a control button to Renoza zero. To turn on the hearth, you need to click on it 5 times, and turn it off is the same.

To switch between modes, you need to press it 3 times. These modes only change the power of the pod system, which can be monitored by the color of the indicator light.

There are 3 colors in total:

1. Green – when the electronics is turned on in the most powerful mode and produces 12.5 watts of power. It is recommended to switch to this mode only when the battery charge is more than 70%.
2. Blue is already an average level with a power of 10.5 watts. It can be used when the battery is charged from 30%.
3. Red is the weakest mode at 9 Watts. You can switch to it when the battery charge is less than 30%.

As a result, the hearth does not have any constant power, like its analogues.

Additionally! On my own behalf, I would like to add that it is best to soar on medium or powerful mode. At minimum, condensation quickly collects in the cartridge. Of course, this causes the battery to die faster, but it's worth it.

To track the battery charge level, also pay attention to the color of the indicator while tightening.

• Green – more than 70% battery;
• Blue – 30-70%;
• Red – less than 30%.

When the battery is completely discharged, it will beep 5 times.

Bringing life back to the battery

You can try to revive the battery by cleaning it. This event is quite simple and consists of several steps:

When the cause of poor traction lies in this, you can replace the element yourself. To do this you need:

Disassemble the product and disconnect the part on which the button is located from the battery - the board is “hidden” in this compartment. Carefully disconnect the adjacent contacts from the desired compartment. Attach the new board to this area and connect the terminals using a soldering iron. Assemble the battery and connect all the parts in the device.

It is quite possible that nothing bad happened to your gadget: you just need to buy and install a new battery.

This is also a fairly simple task: you just need to screw a new battery to the atomizer in place of the old one.

Source