How to prepare a cauldron for first use

Table Of Contents

How to properly fire a cauldron for the first time
New cast iron cauldron - how to prepare for use?
What methods can you use to properly heat a cast iron cauldron?
Processing a cauldron with oil
Processing a cauldron in the oven
Why are cauldrons heated?
Where can I prepare a cauldron for first use?
Heating a cauldron at home
How to heat a cauldron from rust?
Features of preparing an aluminum cauldron before using it for the first time
How to check a heated cauldron?
Soot and carbon deposits from the cauldron
Fat from a cauldron
How to properly clean a cast iron cauldron from burning?
Preventing carbon deposits on a cast iron cauldron when cooking on the stove
Further care of the cauldron
The process of cleaning an aluminum cauldron
Restoring the non-stick layer after cleaning the cauldron
Conclusion

After purchasing a new cast iron cauldron, you need to prepare it. In this article you will learn how to fire a new cast iron cauldron correctly and what is needed for this. This is important for preparing food so that food does not stick and the washing process goes smoothly.

What methods can you use to properly heat a cast iron cauldron?

Cast iron cauldrons have thick walls, but require care. An accidental fall leads to cracks, because the alloy is quite fragile. There are different methods for cleaning and preparing a cauldron for the first use ; you can choose between an open fire and processing at home.

Calcination with table salt

Manufacturers are working on the quality of the coating, increasing its resistance to mechanical stress. For example, the Protectal Plus coating uses the Fissler brand. A chemical reaction creates aluminum oxide, then a non-stick layer is placed. This allows you to use paddles made of

This technique will help you get started and involves the following:

installation of the structure on a slab with a maximum size;
filling the bowl within 3 cm with coarse salt, distributing the mass throughout the bowl;
turning on the stove until the smell of smoke appears;
hold for up to 30 minutes with the stove on;
The salt needs to be stirred periodically. Absorbing factory grease, it will darken;
turn off the stove and container and leave it on the stove to cool;
Throw away contaminated salt.

All that remains is to wash the inside of the structure. There will be enough laundry soap, mustard powder and warm water.

Processing a cauldron with oil

How to prepare a cauldron for the first use using oil? You need 300-700 ml of oil to cover the bottom from 2 cm. The oil should touch all the walls, the structure will turn over. Low fire is selected to avoid fires and strong smoke production. It is worth keeping a fire extinguisher nearby, the time depends on the size of the cauldron, on average it is 40-50 minutes. Next, the residues are drained and the bottom is cleaned with a paper napkin. This oil cannot be used for food.

Processing a cauldron in the oven

Preparing the cauldron for the first use is permitted using an oven. You need to keep the cauldron inside for an hour at 180 degrees. A bluish smoke will come out of the cracks, so you need to wait until the smoke emission stops. From time to time it is worth opening the oven slightly, and taking out the cauldron only after it has cooled down. Next, it is washed with soap.

Correct calcination

Calcination and cleaning with salt is not recommended for use at home in the kitchen or indoors in general. Hot oil and salt can lead to burns, damage to furniture, fire, and acrid smoke will permeate your entire apartment.

It would be correct to transfer these procedures to the open air.

Let's clean it first

Cast iron has a porous surface and you will not be able to wash such dishes clean. Rust in hard-to-reach pores adds complexity. It will not allow a film to form in this place. We need to find a way to clean it properly.

Traditionally, cast iron cauldrons are cleaned with salt.

So, you already have a washed cauldron, there is a fireplace for the cauldron, firewood, 1-2 kg of table salt per 10 liters of cauldron volume and a convenient iron slotted spoon.

The process is slow and will take 2 hours of your time.

Let's get started:

Place salt in a cold cauldron.
Light a fire.
Keep the heat below medium. Stir the salt occasionally.
When the salt turns light brown, remove the heat from under the cauldron and let the cauldron and the salt cool.
Salt is good for nothing after cleaning - throw it away.
The surface of the cauldron is cleaned with dry paper towels or dry napkins.

Protect your skin and eyes from hot salt.

Now the surface is cleaned and has no protection. You need to immediately proceed to firing, otherwise the dishes will quickly rust.

Firing in oil

Firing a cauldron with oil is sometimes called “blueing,” but this is incorrect. No iron oxides are formed here and a smooth film of oil burnt to the cast iron is created.

Don’t be alarmed by what’s burnt: you won’t notice it in the dish.

For roasting, either vegetable oil (sesame, flaxseed, sunflower) or animal fat (pork, beef or lamb) is used.

You will need 0.1-0.3 liters of oil per 10 liters of cauldron volume. A fireplace for the cauldron, some firewood and the right slotted spoon will also be required.

Let's start forming the film:

The firing itself will take 20-30 minutes. And will require your active participation

The cauldron should be dry inside. Be sure to check and, if necessary, dry with paper towels or dry wipes.
Pour oil into a cold cauldron.
Light a fire. The heat should be medium.
Using a slotted spoon or tilting the cauldron, coat the entire inside surface with oil. Important: Try not to splash oil on the fire.
Keep an eye on the walls and periodically pour oil on them when they seem to be drying out. I see.
After calcination is complete, drain the oil. It needs to be thrown away.
Let the cauldron cool, remove it from the heat.
Wipe the surface of the cauldron with paper towels to absorb all unnecessary oil.

In a wiped-clean cauldron, the first thing to do is boil water. If the water does not turn out cloudy, the dishes can be safely used for dishes.

How to bake in the kitchen

We have an extremely negative attitude towards carrying out these procedures at home.

This is due to a nasty smell throughout the entire apartment, a fire hazard, and the threat of burns.

We believe there is no reason to justify firing cast iron cookware in an apartment.

But if you are determined, we have some tips on how to reduce the harm:

Open all windows. A draft will only be a plus.
When cleaning, use one-third less salt, but stir more often.
When firing on a burner, add salt to the oil 1:1, this will reduce smoke.
Use the oven to bake. More on this below.

If you bake in the oven:

Heat the oven to 180-200 degrees.
Pour 10-25 grams of oil into a cast iron pan. Apply oil with a brush to the entire inner surface.
Cover the top of the dish with foil. This will keep your oven free of oil.
The dishes are kept for 40 minutes - 1.5 hours.
It will take 3-5 approaches. Applying oil and keeping in a preheated oven.

Where can I prepare a cauldron for first use?

Both home and outdoor conditions are suitable for the process. But it is worth considering the presence of a considerable amount of smoke.

Heating a cauldron on a fire

Calcination at the stake is the best option. Dry firing is performed over a fire; after the grease burns out, a lighter grayish tint of the coating appears. You need to remove the cauldron from the snow or grass after it has acquired a uniform color. It must be washed and calcined again before use with periodic treatment with vegetable oil.

Heating a cauldron at home

At home, an oven or stove is suitable; the goal is to heat the structure evenly and for a long time. It can take up to 60 minutes to get to work, and smoke will be coming out the entire time, so it’s a good idea to open all the windows and reassure your neighbors.

What to do if the oil in the cauldron catches fire

If the recommendations are not followed during processing, the oil may catch fire in the cauldron. The recommended processing temperature is 200 degrees, since after 230 some vegetable oils catch fire. If a fire occurs, you should do the following:

Remove heat. You should quickly extinguish the fire or turn off the stove. Sand or earth should be used to extinguish a fire.
The burning cauldron should be covered with a large baking sheet or other container that exceeds the cauldron in volume. Due to the lack of oxygen, the fire will go out.
If you have a fire extinguisher, use it. If the flame is very small, you should use baking soda to extinguish it.

What you should never do:

try to extinguish with water;
move the cauldron;
cover the flame with a cloth;
try to put out the flame with a blanket or towel;
extinguish the fire with flour.

If after 15-30 seconds fire-fighting measures do not produce a visible result, firefighters should be called immediately. Oil fires are very dangerous and spread quickly.

The cauldron should be treated before first use. Only in this case will the container be suitable for use for food purposes. Without such treatment, food will begin to burn, and it can also be hazardous to health.

How to heat a cauldron from rust?

To remove rust, the product is calcined, then it is allowed to use sandpaper with different levels of abrasive. Calcination makes cleaning easier. After removal, a layer of oil is created and baked at 250 degrees for an hour.

Removing rust from a cast iron cauldron

For cast iron, chemical compositions from the store with further oil firing are suitable. You can also soak the product in water with a high vinegar content for 30 minutes. Next, calcination and creation of an oil film with firing are carried out.

Why calcinate the cauldron

Before the first use, it is enough to wash any other dishes with detergent and they can already be used. However, a new cast iron cauldron should be fired before use.

The fact is that in the manufacture of cast iron cookware, a special technical lubricant is used. It is used to process the mold for pouring the product for easy removal of the finished dishes. It protects cast iron products from corrosion during storage and transportation.

However, during cooking, such grease mixes with food and gives it an unpleasant aroma and taste. You cannot eat such food. Therefore, before the first use, such utensils are calcined to completely remove traces of technical lubricant.

There are several ways to fire a cast iron cauldron. All of them are quite simple, you just need to strictly follow the instructions and observe safety precautions.

How to check a heated cauldron?

How to fire a new cast iron cauldron and check the correctness of firing? You need to get a color without dullness, saturated. If it is uneven, the light will not be reflected correctly. There should be no rust. To check, moisten a napkin with oil and wipe the bottom and edges with it. There shouldn't be any traces. If there is a brownish coating, oil firing is repeated. Aluminum can only be checked by the absence of carbon deposits on the walls.

Rust from the cauldron

Proper removal will extend the service life, avoid damage and other defects.

Soot and carbon deposits from the cauldron

If you can’t wash it with hot water, add a little baking soda. In nature, it is good to use river sand. Hot water removes food residues well, but removing carbon deposits with a fork or knife is unacceptable.

Fat from a cauldron

Eliminated with hot water, river sand, using boiling with the addition of a small amount of ordinary soda.

Care Tips

After processing a new cauldron, you must adhere to the rules for caring for it. They are as follows:

After cooking, it is better to transfer hot food to another container.
Be sure to thoroughly clean the cast iron from food residues and rinse without detergents.
Wipe dry and put back in place.

The dishes should not be wet during storage; it is advisable to wipe them with a dry cloth from time to time. When using aggressive detergents, the non-stick properties may be lost, so you can treat the product with oil again. Cast iron cookware is very reliable and if you know how to store the cauldron correctly, it can last forever.

It is important to remember that annealing is useful not only for new cookware. The procedure is recommended if there are burnt food residues on the cauldron. If abrasive products are used, the dishes must be burned, then a layer of oil must be built up.

Further care of the cauldron

It is important to dry the product with a towel and dry it, so all remaining moisture will evaporate. The container can then be removed for storage. For long-term storage, wrap with cloth or parchment. The product should be placed on its side and washed without aggressive chemicals.

How to wash a cast iron cauldron?

Important! Cast iron should not be scratched with sharp objects, but the use of a metal brush, soda and sand is allowed.

Fat-dissolving mixtures are undesirable; they will remove the natural film that prevents burning.

The process of cleaning an aluminum cauldron

Formulations that dissolve fat are acceptable; only products containing oxalic acid are not suitable. They spoil the color of the metal. Abrasives and metal brushes are suitable; soaking or using a dishwasher will not cause harm.

Is it necessary to fire an aluminum boiler?

Aluminum is an active metal. And in the open air, under any conditions, a protective oxide film is formed.

When you use it for the first time, you will need to clean such a cauldron from the preservative factory grease. Household chemicals can handle this.

How to properly wash a cauldron is written in this article.

To create a non-stick oil layer, you need to repeat the procedure as for cast iron cookware, but keep the heat low .

Please observe fire safety. A properly processed cauldron will last a long time and will delight you with delicious dishes more than once.

Restoring the non-stick layer after cleaning the cauldron

Treatment will allow you to return the usual properties of the dishes. After thorough cleaning, it will lose its characteristics and food will stick and burn. The usual color is lost.

Tips for restoring the non-stick layer

Washing with warm water, wiping dry, coating with salt and baking will help restore properties. If this has already been done, all that remains is to apply sunflower oil to the inside.

How to form a non-stick coating

Preparation for first use involves not only eliminating machine oil odors and other impurities. In order for new cookware to function smoothly, it is imperative to make a non-stick coating.

This is done like this:

The cauldron must be dry. Lubricate it generously with vegetable oil, without skimping.
Place the coated dishes on paper towels. Use another towel or napkins to remove oil stains.
Briefly turn the container upside down so that the oil drains. Then move it to the oven, accelerated to a temperature of 180. It is recommended to lay foil on the bottom of the oven so that the dripping oil does not fall on the oven cover.
Keep the dishes in the oven for at least three hours. This time is needed for the oil to fry and turn into a thin but durable film that will protect the cauldron from burning.

Salt

Before using this method, you must wash the product with a mild detergent. You can take dishwashing gel or laundry soap.

Then wipe dry with a towel or napkins and begin using this burning method.

How to properly heat a cast iron cauldron:

You will need 1 pack of salt, which is poured onto the bottom of the dish. It should completely cover the bottom of the product.
Place the dishes on the stove and turn on the heat.
During the process, you need to stir the table salt. When it turns brown, turn off the stove and leave the cauldron to cool. Do not pour cold water or expose it to sudden temperature changes (for example, take it outside in winter).
When the dishes have cooled, pour the table salt into a garbage bag and wipe the surfaces of the product with paper napkins.

After this method, the dishes will shine clean and will be suitable for use.

When stirring salt, wear gloves, preferably high ones, and use goggles and a respirator. Hot salt causes serious burns to the face and eyes if it comes into contact with the skin.

In this way, you can process not only cast iron products, but also aluminum ones. The algorithm of actions is the same.

Salt not only absorbs technical oil, it absorbs all the chemicals that were used in the production of the product.

Features of preparing an aluminum cauldron before using it for the first time

Cast duralumin is inferior in physical properties to traditional cast iron. Utensils become unusable faster and do not retain heat well. But aluminum has an undeniable advantage - light weight. It is difficult for a petite housewife to hold a cast iron cauldron with food; it is better to give her an aluminum one.

The second plus is that duralumin can be placed in the dishwasher.

The process of preparing aluminum casting for cooking is not much different from firing cast iron. Main differences.

Aluminum cannot be overheated; the bottom will become rounded and the walls will become oval.
It is better to use damp wood for a fire; they have a lower combustion temperature.
Aluminum cookware requires 1/3 less time to prepare.
It is not recommended to do dry calcination; you need to use salt or oil.
Temperature shock (sharp temperature contrast) is undesirable for duralumin.

Once the firing is complete, free aluminum will not get into the food and will not enter into a chemical reaction with any product during cooking.