PVA is one of the main components when making slime at home. It is enough to add a thickener into it and that’s it - the slime is ready. By adding all kinds of ingredients, you can turn it into fluffy slime, butter slime, hand gum, make it glow in the dark or move behind a magnet.
There are often articles on the Internet on how to make slime from PVA glue. Not all of them are successful, and some are not working at all. Below are the best recipes for such a popular and beloved toy.
Brief description of PVA and its types
PVA is a combination of an aqueous emulsion of polyvinyl acetate with various plasticizers and additives. It has a white color and a weak characteristic odor. PVA Features:
- withstands deformation when drying;
- does not crystallize;
- mixes with water;
- non-toxic;
- elastic;
- soluble in organic acids;
- does not burn.
The scope of application varies depending on the additives present in it. There are several options for PVA:
- Household (wallpaper) . It can be used to glue paper-based wallpaper to walls. Frost-resistant (down to -40˚С). Holds paper well.
- Universal (PVA-MB). It has the ability to glue not only paper, but also wood, leather, and cardboard. Frost resistance down to -20˚С.
- Stationery (PVA-K). The most common office adhesive. Does not have frost resistance. More liquid in consistency than wallpaper.
- Super glue or improved universal glue (PVA-M). It is used during construction work. Frost resistance reaches -40˚С.
Any of these types is suitable for making slime at home. You just need to take into account the characteristics of each of them. [su_youtube url=”https://www.youtube.com/watch?v=F7PMplPHo3E”]
How to handle the toy and where to store the slime
If the PVA slime doesn’t work out, most likely it’s all due to incorrectly selected proportions; you can try to change them experimentally. Slime, made strictly in accordance with the instructions, is easily removed from the container and has a homogeneous, elastic mass. If lumps are visible here and there, the product must be further kneaded.
If the slime is very sticky and gets your hands dirty after every game, then it should be diluted with a liquid component from the composition. The diluent can be water or liquid starch, which is most often one of the ingredients. But even here it is worth observing moderation: too liquid slime will seep through your fingers. In such cases, on the contrary, flour, PVA glue or borax solution are added, depending on the composition.
There is a funny property of slime that not many people know about. If you place it in a tightly sealed container with water and put it in the refrigerator overnight, then in the morning you will find that the mass has increased in volume; the slime will simply “grow.” Surely any child will want to do this on their own.
As for storing the toy, it is best to leave it in a tightly sealed container in a cool room or refrigerator. If you neglect these recommendations, your homemade slime will simply dry out. Therefore, after each game it is important to take care of its safety. If the slime begins to dry out, you can revive it, but it is much easier to make another one of a different color with the addition of foam balls, glitter, mother-of-pearl, and so on.
Recipes with PVA
In order not to waste time and ingredients, you should choose working PVA. There are many brands of this glue, but not all work equally well with thickeners.
The following are great for slimes:
- Ray;
- Berlingo (Berlingo);
- Erich Krause (Erich Krause);
- Elmer's;
- Navigator;
- Brauberg;
- PVA-M Extra Lakra.
Non-working brands include:
- Attache;
- Junland;
- Staff;
- Lakra;
- Star Wars.
When tetraborate is added, they either do not thicken at all or turn into a curd mass, unsuitable as a base for slimes.
The best homemade slimes are made from fresh, thick glue. If the PVA separates into fractions, then it is lost. It will be difficult to make something worthwhile out of it.
Which one is best?
Now about what kind of glue is needed. These brands are working accurately and tested:
- PVA glue Stolyar Moment;
- PVA Berlingo;
- PVA Brauberg;
- PVA Erich Krauser;
- PVA Contact;
- PVA Novohim;
- PVA Attomex;
- PVA Omega;
- PVA Beam;
- PVA-M;
- PVA Kores;
- PVA Cone;
- PVA Every day;
- Dandy;
- PVA Andex;
- PVA Stick Up;
- PVA 365 days;
- PVA Elmers;
- PVA-K19;
- PVA VGT;
- PVA Lakra;
- PVA Deli;
- Beam Yellow;
- PVA Titan;
- PVA-K;
- White House PVA glue.
The following brands are considered unsuitable for making slimes:
- Attache cannot mix with tetraborate and begins to coagulate into flakes.
- Inteks . It curls into a very unpleasant mass, which quickly collapses and sticks a little to your hands.
- Cullian . A strange mass comes out, similar to cottage cheese.
- Hatber . The result is too hard a slime that does not curl at all.
- Brauberg (liquid only). Cannot interact with any thickener.
- Firm 96 . Does not interact with thickeners, while curling into a strange curdled consistency.
- Office space . The mass sticks to your hands, instantly falls apart, and is not particularly pleasant to look at.
- Norman . It also turns out to be an incomprehensible curdled mass.
- Lakra . It does not cope with the interaction with the thickener at all. If you pour in a thickener, it begins to curl into a very dense lump that does not stretch or wrinkle.
PVA-M Luch
It is one of the most frequently used when making slimes . The composition of the glue is very ordinary, that is, it is simply thick and white.
When the glue begins to act with activators, the reaction becomes noticeable almost immediately. A very dense lump begins to form, which in its own way immediately begins to resemble slime. When mixed, it immediately becomes clear that the glue is definitely suitable and this is what is needed to prepare ideal anti-stress for hands.
Universal Moment Joiner
It has a very thick composition, therefore, before creating a slime using this glue, you need to pour water in a ratio of 1 to 1 . And after this procedure, the glue becomes much more suitable for making the perfect slime.
And the best and most viscous ones are obtained if you add a little shampoo or any liquid soap to them, because they soften the slime and it becomes much more pleasant to the touch and stretches better.
Attache
This brand of glue is incredibly attractive because it is a mixture of alkali with silicates such as sodium and potassium. In this regard, the glue is called “Liquid glass”. The consistency of the glue is quite thick, and the color is crystalline. With this glue you will get an excellent colorless slime.
When the thickener is poured in, the result does not take long, as the mass quickly thickens and becomes more stretchy. The result is a slime that can stretch quite a lot without breaking, and it also makes cute sounds when you play with it.
Does Berlingo work?
This brand has not been tested and did not perform well when used for our purposes. Despite the fact that the consistency of this glue is very thick, but, to our great chagrin, the glue does not want to help.
When mixed with some activator, the glue begins to change its composition and turns into an unpleasant cheesy mass. If you take the mass in your hands, you feel that it is very oily.
Building
In recipes for preparing various slimes, they often write or talk about the use of construction glue. One of these, called “Alina,” can be confidently classified as a glue brand that works well in manufacturing. And also PVA glue “Stolyar”. With these brands of glue you can get excellent quality slime.
When the activator is added, the mass immediately begins to thicken, which indicates that the slime should be obtained. And also to create slimes, you can buy not only these brands of glue, but glue that will be very similar in composition to the above. Unfortunately, most types of construction glue end up producing a runny slurry with lumps.
Only PVA and tetraborate
The simplest slime recipe made from PVA glue and tetraborate allows you to get a toy in just a few minutes. You will only need:
- PVA – 85 ml;
- sodium tetraborate – 2-3 drops.
PVA is poured into the container and a drop of tetraborate is added. The glue will instantly begin to curl. You need to knead the mixture for a minute. If it remains liquid, add another drop. Sodium tetraborate is a very active thickener. If you pour too much at once, you can ruin the toy. When the glue has curled enough and stops sticking to the walls of the container, you should knead the resulting slime with your hands.
[su_youtube url=”https://www.youtube.com/watch?v=lPwZ9vm28Vg”]
Without sodium tetraborate
A soft, sticky PVA slime without tetraborate can be made using the following ingredients:
- PVA – 85 ml;
- shower gel – 1 tsp;
- Teymurov spray – 15-20 sprays;
- toothpaste – 1 pea.
First of all, you should pour out all the glue in the bowl, add a little toothpaste, a spoonful of shower gel. Mix all ingredients until smooth. You need to thicken gradually: make 3-5 sprays, mix, then repeat this procedure. You need to add spray until the mixture stops sticking to your hands. If you want to make the toy brighter, you can add a little food coloring or gouache. This slime clicks loudly, flows smoothly, has a pleasant texture, and stretches perfectly.
Flour slime
You will need: flour, natural dye, cold and warm water.
Master Class
- Take a container and pour 400 grams of sifted flour.
- Add a quarter cup of cold water.
- Add a quarter glass of warm water.
- Mix until smooth.
- Add a few drops of natural dye and mix well.
- Place in the refrigerator for 4 hours.
Lizun is ready! I recommend watching the video: slime made from flour.
THREE Slime WITHOUT GLUE from FLOUR / HOW TO MAKE HANDGAM without sodium tetraborate AND GLUE
Slime made from PVA and Persil
Persil washing gel can be used not only for its intended purpose, but also as an excellent thickener for slimes. For this recipe you will need:
- PVA – 85 ml;
- shampoo – 1 tbsp. l.;
- water – 1 tbsp. l.;
- Persil – 1-2 tsp;
- glycerin - 1 tsp;
- dye.
Mix shampoo and water in a container, and then pour PVA in there. Due to the foam formed by the shampoo, the glue will become more airy. Now you can tint it in the chosen color and make it more attractive by adding a spoonful of glycerin. You need to thicken the mass gradually: first pour in one spoonful of Persil, stir and, if necessary, add more. The slime according to this recipe is viscous, crispy and pleasant.
Lick from a face film mask
This recipe will make a multi-colored slime that everyone, both children and adults, will certainly like.
We will need:
- PVA -1 bottle
- dye
- Feri dishwashing detergent
- boric acid - 25 ml
- dyes
Stages of work:
1. Pour PVA glue into a jar, then add boric acid into it and mix everything very thoroughly. Then pour in the feri, just a little, about 1-2 tablespoons. Stir, the mass will trample right before your eyes, it will become fluffy.
2. Add another tablespoon of feri and start kneading the mixture with your hands.
3. Pour in any dye and mix with your hands. You will get a real slime like in the movies, but if you want to make a lot of toys, then divide the resulting mixture into several containers and add the desired color of dye to each container.
4. For example, you can use blue or purple.
5. And then combine all the options in one bowl, you get a rainbow-arc. Play and create for your health! It turned out very well, and the main thing is that the consistency is exactly the same that everyone is so persistently looking for everywhere.
Slime with shampoo
A good fluffy slime can be made from PVA Luch glue and shampoo. The list of required ingredients looks like this:
- any shampoo - 2-3 tbsp. l.;
- PVA from Luch - 50 ml;
- tetraborate - 2-3 drops.
Pour shampoo into a container and lather it with a sponge. It will work like shaving foam, making the slime voluminous. Pour glue into the resulting foam. Stir the mixture until smooth. If you want to color the slime some color, then it’s time to add dye. Lastly, the thickener is introduced. Carefully, one drop at a time, so that the slime does not turn into a rubbery hard mass.
The recipe for slime made from Luch PVA glue with sodium tetraborate is quite simple but effective. Airy slime made in this way is very cool and is not inferior in its properties to purchased ones.
Ingredients for making slime
The original slimes, which appeared in the 1970s and 80s, were made from sodium tetraborate (a salt of boric acid) and gum (a natural material). Over time, manufacturers tried to reduce the cost of the process and began to add other ingredients to give elasticity to the product. Slime with glue today comes from China, but PVA is also suitable for making toys at home.
PVA glue is an emulsion of polyvinyl acetate with water. When a thickener is added to it, a chemical reaction occurs, the mass hardens and becomes elastic. When kneading, liquid is released, which is drained.
Do-it-yourself slime is made from glue with the addition of other components. These include:
- Detergents, shower gel, shampoo . These ingredients are required to give the toy a jelly-like consistency. They dissolve in water and act as a thickener.
- Shaving foam . The slime made from glue and foam is elastic and airy. The foam is light and porous. The adhesive polymer holds its structure. The finished slime is crispy and keeps its shape.
- Salt, soda, starch . These natural components are harmless and add volume to the viscous mass.
- Cream, toothpaste . Cosmetics and hygiene products have a thick viscous structure and a matte, rich shade. When combined with glue, you get a thick slime that looks like marshmallows.
- Stationery glue . It plays the role of an activator and imparts transparency to the finished product.
In addition to the required components, slime made from PVA glue includes additional elements: glitter, foam balls, dyes, small toys.
Important! Knowing how to make slime from glue, you will get a toy that looks like a store-bought one. PVA gives the product elasticity and a dense, viscous texture.
Slime with toothpaste
A simple recipe that even a beginner can do, includes only two ingredients:
- PVA - 1 tbsp. l.;
- gel toothpaste - 2 tbsp. l.
If you use colored paste, you can make spectacular bright slime even without dye. Please note that it must be gel. This recipe won't work with regular pasta.
First of all, you need to squeeze the paste into the container, and then gradually add glue in a 2:1 ratio. The ingredients should be mixed until smooth and placed in the refrigerator for about 15 minutes. The texture of the resulting slime is soft and elastic. It can be easily rolled into a ball, because it holds its shape perfectly and does not spread. If the mixture remains sticky after refrigeration, it is better to let it sit a little longer with the lid open so that the excess liquid evaporates.
Slime made from glue and soda
If you don’t have tetraborate at home, you can make a slime from PVA glue and soda. For preparation you will need:
- hot water - 100 ml;
- glue - 2-3 tbsp. l.;
- soda - 2 tsp.
The first step is to prepare a thickener. To do this, soda dissolves in water. Next, glue should be poured into this solution. There is no need to actively mix, just carefully turn the glue clot in the resulting thickener. After a couple of minutes, the excess water needs to be drained and the slime allowed to sit for another couple of minutes. After this, thoroughly knead the resulting mass with your hands and squeeze out excess water. The resulting slime is soft and tender.
A simple way to make shaving foam
Well, if you have shaving foam lying around, then you can use it to make our anti-stress. I watched the video and said “Wow”, it turned out to be such a huge slime, I’m stunned, I’m sharing it with you:
And in conclusion, I would like to give a couple of tips on caring for slimes:
- It is better to treat toys with an alcohol solution, so they will last longer.
- But it is not recommended to immerse it in water.
- To maintain its shape, you need to inject alcohol inside with a syringe.
- It is better to store them in a closed container, and after a week it is better to make a new Velcro.
OK it's all over Now. Everything turned out short, concise, but at the same time detailed. I think now you will definitely want to make slime yourself, and will not buy it. For me, a simpler toy couldn’t be imagined.
From PVA-based glue stick
PVA in the form of a glue stick is also suitable for making slime at home. It is enough to first melt it and then thicken it again to the desired consistency. For this you will need:
- PVA glue stick;
- water - 2-3 tbsp. l.;
- tetraborate - 2-3 drops.
First you need to melt the glue stick. This can be done in the microwave or in a water bath, after cutting it into pieces and adding water. When the glue becomes liquid, you need to cool it a little and you can thicken it. Tetraborate is introduced drop by drop and mixed after each addition. When the mass curls up and stops sticking to the walls of the container, you can knead it a little in your hands and you can play. This recipe makes a soft classic slime.
Slime with office glue (PVA-K)
The difference between stationery PVA and universal PVA is its consistency. It's more liquid. To use it to make slime at home you will need:
- PVA-K - 200 ml.;
- dye (optional);
- sodium tetraborate.
First you need to tint the glue, and then thicken it with tetraborate. The activator must be added gradually, mixing thoroughly. This slime does not hold its shape and spreads when placed on a surface. At the same time, it stretches well and does not stick to your hands.
Wallpaper glue slime recipe
PVA wallpaper glue has a thick consistency. It is suitable not only for repair work, but also for making slimes. You will need:
- Household PVA - 100 ml;
- hand cream - 1 tbsp. l.;
- soda - 1 pinch;
- boric acid.
Mix glue with hand cream in a container. Add a pinch of soda, stir and introduce the activator. In this case it is boric acid. This should be done gradually, mixing thoroughly. When the mass has curled up, continue with your hands. The slime turns out very crispy, stretches to the thinnest film and does not stick to your hands.
Is it possible to use PVA Moment Joiner for slimes?
PVA Moment Stolyar construction adhesive makes an airy slime no worse than other proven brands of glue. The important difference is that this type of glue is toxic. When working with it, you should use gloves and a mask. To make the toy click loudly and stretch well, it is better to use the Universal Joiner in a white tube. List of necessary ingredients to make this slime at home:
- glue - 100 ml;
- any cream (can be used for hands) - 1 tbsp. l.;
- shaving foam - 7-8 tbsp. l.;
- activator (in this case tetraborate dissolved in water).
First, wood glue and foam are mixed in a container in a 1:1 ratio. You also need to squeeze out the hand cream here and mix everything until smooth. Now this mass should be thickened. The activator is made like this: for 1 glass of water - 2 tbsp. l. tetraborate. The resulting solution should be added one teaspoon at a time to the resulting mixture. The reaction will begin quickly and you will be able to play with the slime within 1-2 minutes. This is a fun and quick way for those who like to make slime at home.
How to choose a working adhesive product?
There is simply a huge number of PVA brands that can be confidently called working and used for making anti-stress toys. But, unfortunately, not all brands of glue are suitable for making the popular anti-stress agent.
The success of making slime depends on the composition of the glue itself, since some of them are thicker in consistency, while others, on the contrary, are too liquid. Vinyl acetate emulsion is included in almost every adhesive and is their basis.
The adhesive may have a normal or extended scope of application , but it all depends on the type of plasticizer and other additional features. components. Glue that is expired or nearing its expiration date is unlikely to make good slime. It is undesirable to use glue that has been open for a long time.
And we can immediately say that it will not be possible to create slime from such types of glue as:
- glue, which has a watery composition;
- if the glue is intended for gluing paper products;
- with a very greasy texture.
How to make slime from universal PVA glue (PVA-M)
Thick, white glue without a pungent odor, PVA-M Luch is well suited for making homemade slimes. It works with any thickener, which is a definite plus. For a soft, airy slime you will need:
- PVA-M from Luch - 85 ml;
- starch - 2 tsp;
- soda - 0.5 tsp;
- hand cream - 1 tsp;
- shampoo - 1 tbsp. l.;
- water - 1-2 tsp;
- Teymurova foot spray.
In one container you need to mix glue, starch, soda and cream until smooth. In the other, using a whisk, mixer or sponge, you need to whip up a thick foam from shampoo and water. After this, the contents of the containers must be combined and mixed carefully. Thicken the resulting air mass. Teymurov's spray will help with this. You should do a few sprays at a time and monitor the reaction. The result is great. This is a real fluffy slime that curls beautifully into a rosette, stretches and clicks well. You can decorate this slime as you wish with beads, sparkles or sequins.
How can you make a toy with your own hands at home?
PVA glue is non-toxic, has a light, unobtrusive odor that quickly disappears, so it is ideal as a base for creating a slime that a child will play with. This glue is easily mixed with various substances, including human hygiene products, and even baking soda. The following describes how to make slime with your own hands using any type of PVA glue, including using construction glue, PVA-M Extra Lakra and others, as well as sodium tetraborate, shaving foam or other ingredients, the proportions of the components are given.
Recipe with sodium tetraborate
This drug is sold in pharmacies for about 15 rubles.
With it, the slimes turn out beautiful, elastic and do not spoil for a long time, as it has antibacterial properties. We recommend: Fluffy anti-stress toy: how to make fluffy slime at home?
To make slime with sodium tetraborate, you will need components in the following proportions:
- PVA glue – 45-50 g;
- sodium tetraborate;
- food coloring and glitter, optional;
- mixing container and spoon.
Manufacturing:
- Pour the glue into a bowl, mix, remove any lumps if there are any.
- Sprinkle glitter on top and add dye.
- Pour in 2 tsp. mix everything with a spoon until smooth.
- In 1 tsp. Dilute 2-3 drops of sodium tetraborate with water and pour the resulting solution into a bowl with the remaining ingredients.
- Stir the resulting mass until it begins to pull away from the walls of the dish.
- Take out the slime and mash it further in your hands.
Attention! This is the simplest recipe for smile, but tetraborate is toxic, so children under 3 years old should not be given this toy, and others should wash their hands thoroughly with soap after using it.
From shaving foam
To make slime based on PVA glue, you can use shaving foam as a thickener.
It gives the toy volume, stabilizes the consistency and the need to use sodium tetraborate disappears. To make slime with shaving foam you will need:
- PVA glue – 100 ml;
- shaving foam bottle;
- food coloring (optional);
- bowl and spatula for kneading.
Making slime:
- Pour all the glue into a bowl and add a little shaving foam and dye, mix with a spatula.
- If the consistency is runny, you need to add more foam to thicken the mass.
- Take the mixture in your hands and knead vigorously until it looks like slime.
With baking soda
Soda costs a penny, is safe for humans and can be found in almost every home, so making slime with its addition is not difficult.
To create slime you will need:
- PVA glue – 100 ml;
- baking soda – 1 tsp;
- hot water – 100 ml;
- dye optional;
- mixing container and spoon.
Manufacturing:
- Pour hot water into a bowl and pour baking soda into it, stirring vigorously.
- Pour glue into a separate container and add dye drop by drop until a rich color appears.
- Add 0.5 tsp to the mixture of glue and dye. pour in the soda solution, stirring thoroughly each time.
- As soon as the mixture thickens, take it out and mix it with your hands until it has a slime-like consistency.
With toothpaste
There are no specific proportions when making slime from PVA glue and toothpaste.
The mixing process and the final result directly depend on the composition and quality of the toothpaste. We recommend: How to make spectacular mountain slime? Slime recipe and tips for storing toys
Main criteria to adhere to:
- It is better to purchase a paste with a gel consistency, as it holds its shape well and does not have powder inclusions;
- the total mass of toothpaste should be approximately ⅔ of the volume;
- The smell of the paste should not be strong minty, as it will be unpleasant for the child.
Important! It is advisable to avoid toothpastes that contain large amounts of fluoride, as it is very toxic when taken orally. This applies to those whose children can bite off part of the slime and eat it.
Required ingredients:
- PVA glue – 100 ml;
- a tube of gel toothpaste, preferably colored;
- bowl and spoon.
Slime making process:
- Squeeze half a tube of toothpaste into a bowl.
- Pour PVA glue into it, stirring thoroughly. If the consistency is not suitable, then add a little more paste and mix again.
- When the mass acquires a viscous slime consistency and begins to come off the bowl and hands, then it should be transferred to a plastic bag and then placed in the freezer.
- After 1 hour, the toy can be taken out and used.
Immediately after refrigeration, the slime will be like plasticine, and after heating it will acquire a soft, viscous consistency.
Jelly slime with flour and water
To make jelly slime you will need very simple ingredients:
- PVA glue – 250 ml;
- liquid soap – 1 tsp;
- flour or potato starch - the volume is selected during the kneading process;
- warm water – 1 glass.
Cooking process:
- Squeeze glue into a deep glass bowl, add liquid soap and a glass of warm water.
- Mix the adhesive mass thoroughly with a wooden spatula.
- Thicken the mixture by adding flour or starch little by little, stirring continuously. The mass should be thick and viscous.
If the liquid soap was transparent and the slime turned out to be completely colorless, you can, at the very beginning, add a little gouache or food coloring to the bowl.
From shampoo
The simplest hair shampoo is also suitable for making slime at home. To make slime from shampoo you need to prepare the following ingredients:
- PVA glue – 150 ml;
- shampoo – 50 ml;
- food coloring or gouache.
Manufacturing:
- Mix shampoo, glue and dye in a deep bowl.
- Transfer the mixture into a tight bag.
- Mash the bag until smooth.
To get a very dense slime, glue and shampoo must be mixed in a ratio of 4 to 1, that is, 200 ml and 50 ml, respectively.
Will it work without a thickener?
Sodium tetraborate is most often used as a thickener. Without it, making slime will not be difficult, but without a thickener, the product will not be elastic and elastic.
We recommend: How to make slime from toilet paper, several simple and easy-to-understand recipes
Shaving foam, soda, flour, gelatin, washing gel, hairspray and even Visine drops are an excellent replacement for sodium tetraborate, which often causes eczema in susceptible people.
Simple recipe with air freshener
This recipe is one of the simplest, but you need to take into account that for it you should select not only a working glue, but also a freshener. To make sure the toy turns out great, it’s better to take:
- PVA - 85 ml;
- Air Wick freshener;
- dye.
Pour glue into a deep bowl, color it and thicken it with a freshener until the mass begins to peel off from the walls. It is better not to rush into adding the activator. Having made 1-2 long spritz, you should first actively mix the mass, and if it is still liquid, add more. These simple components make a cool toy. It will take a couple of minutes to make, but it can captivate you for a long time.
What can you replace the main ingredient with?
PVA glue can be replaced with regular office glue . You can also prepare slime using:
- starch;
- flour;
- gelatin;
- plasticine.
The recipes are similar to the previous ones, you just need to add a little of everything.
Using the recipes and tips given above, everyone can make their own signature slime. Just turn on your imagination and toga slime will become an excellent anti-stress, because during the manufacturing process you can paint it in any color, and also add sparkles, beads, foam balls, making it even more interesting and unusual.
How to brew pva yourself
PVA glue is not uncommon and can be found in any office supply or construction store. But if you are not satisfied with the quality of the brands presented, you can make it yourself. The first step is to prepare all the necessary ingredients. You will need:
- distilled water - 1 l.;
- glycerin - 5 g;
- flour - 100-150 g;
- ethyl alcohol - 20 l.;
- photographic gelatin - 5 g.
Preparation takes place in several stages. First you need to soak the gelatin in water and leave it to infuse for a day. After this time, you can begin to cook the glue. The swollen gelatin is melted in a water bath. Once it becomes liquid and begins to boil, you can gradually add flour. This stage will take about an hour. When the mixture becomes similar in consistency to thick sour cream, add alcohol and glycerin and soak for half an hour in a water bath. It is very important to constantly stir the mixture with a wooden spoon to avoid the formation of lumps. This glue should be stored in a hermetically sealed container.
[su_youtube url=”https://www.youtube.com/watch?v=1MUeuaUB1A8"]
Can you make slime from non-working PVA glue?
If the slime doesn't work out, the problem is most likely PVA. Making a toy from non-working glue is a difficult task, but doable. There are several ways:
- Add fresh working PVA. After this, you can add other components required by the recipe and thicken. It is important that there is a lot of high-quality glue, about half the volume of the finished slime.
- Using a film mask. It will thicken the non-working glue. Just add a couple of spoons and mix thoroughly. In addition, the mask will make the toy more glossy and attractive.
- Shampoo. It can be replaced with shower gel. These components work on the same principle as the film mask.
[s[su_youtube url=»https://www.youtube.com/watch?v=5lTw44xrXAY»]p>
To make slime from non-working glue, you can experiment with thickeners. For example, instead of tetraborate, you can use soda, Naphthyzin or Teymurov spray
Slime of various textures is made from PVA glue. Some crunch loudly, others smear, and still others can be used to make bubbles. For beginners, it is better to follow the recipes exactly and use proven brands of glue. More experienced slimers can experiment a little with the ingredients. This will change the texture and properties of the toy. This activity can captivate both adults and children for a long time.
History of the origin of lizuns
The initial interest in this toy appeared in the 1990s, when the animated series “Ghostbusters” was released on television boxes. The first hero was the green slime ghost.
In general, this toy was made back in 1976 under the leadership of Mattel. The composition included the components guar copper, minerals, borax, which make the toy slimy and stretchy. But a substitute for all these chemical elements has appeared - PVA glue. This is exactly what we will use.