In the production of washing machines, Bosch uses innovations that ensure flawless operation of the devices and high quality of cleaning. The user of the equipment only needs to follow the operating rules and manufacturer’s recommendations. We learn how to turn on and use Bosch washing machines correctly.
- Preparing a Bosch washing machine
- How to turn on Bosch SMA
- Washing modes
- How to enable child lock
- Expert recommendations
- Catalog of BOSCH washing machines with characteristics
Preparing a Bosch washing machine
How much and where to pour powder
The washing result is greatly influenced by the amount of powder used. In addition, failure to comply with the norm when adding detergent can lead to increased foaming and malfunction of the machine.
The dosage of the powder is determined taking into account the following indicators:
- degree of soiling of the laundry;
- number of things;
- type of fabric;
- washing mode;
- hardness of water.
Pour the powder into the tray
Before use, you must study the manufacturer's recommendations on the packaging of the product. Usually for 1 kg of dry laundry the following is poured into the tray:
- for lightly soiled clothes – 150 g of powder;
- for very dirty things - 225 g of product.
An insufficient amount of powder will result in the laundry not stretching. Excess detergent can cause unpleasant streaks on clothes.
Some Bosch CMA models are equipped with the option of weighing laundry before washing. In this case, focus on this indicator and add the required amount of powder.
The detergent tray in Bosch machines is a retractable plastic module that consists of three compartments:
- Detergent is added to the compartment marked A, 1 or I to pre-soak laundry.
- Section B, 2 or II is designed to load powder for the main work cycle.
- The smallest container with a flower icon or the number 3/III is used for conditioner.
Bosch AGRs are equipped with sensitive filters, so it is better to use high-quality detergents recommended by the equipment manufacturer. A list of powder brands is published on the company’s website.
Safety precautions
To ensure safe operation of washing equipment, you must carefully read the instructions.
When operating the machine, the following safety rules must be observed:
- The SM can only be used at home for washing textiles. The machine must be connected to cold water;
- Keep pets and small children away from the equipment;
- Do not touch the glass of the machine door while it is in operation. The glass can be very hot.
- Turn the machine on and off only with dry hands;
- Cut off the power cord and break the hatch door lock when disposing of the unit. This is necessary so that small children do not lock themselves in the car if they play with it.
- When connecting and installing the device, follow all rules. This will avoid electric shock, water leakage, fire and other accidents.
Important! The equipment manufacturer is not responsible for the safety of your health and property if the above safety requirements are violated.
How to turn on Bosch SMA
Once you've sorted your items, load them into the drum and slam the door. Then pour the required amount of detergent into the tray.
Next, select a program and, if necessary, adjust it: change the temperature mode or the spin speed of the drum. Bosch machines allow the user to make these changes and even delay the start of the wash.
Are you unplugging your washing machine?
Oh yes! No
Some Bosch SMA models are equipped with special options for:
- saving resources;
- reduction of work cycle time;
- anti-crease protection;
- improving the quality of rinsing.
These functions must be activated before starting the wash. All that remains is to press the start button and, after a set time, remove clean laundry from the drum.
Design
The design of the machine is quite simple. It is made in the usual white color. But this is not bad, it fits perfectly into the interior of a bathroom with a white bathroom. technology.
Washing machine operation
– The machine turns on after selecting a washing program and pressing the Start button.
– After the wash has started, the drum door is locked and cannot be opened during the wash.
– There is also a child lock feature.
– During washing, the machine is silent, but during spinning it makes itself felt. She shakes a little, but doesn't move around the bathroom.
– At the end of the wash, the machine loudly signals its completion several times.
In terms of functionality, the machine does not have a special variety of washing modes. And yet, almost all modes are needed and used by housewives. They cannot be adjusted, that is, if there is a “cotton” mode of 40 degrees, then you cannot increase the temperature to 50. The washing time cannot be changed either. Of course, additional functions can be used. You can also adjust the number of revolutions during spinning.
- Cotton 40 degrees. Standard washing mode. Things wash well and do not get washed out.
- Cotton 60 degrees. Towels and bed linen are washed on it.
- Cotton 60 degrees Eco. This mode allows you to save energy by reducing the amount of water consumed, but it also increases the washing time.
- Super fast wash 30 minutes. If the item is not heavily soiled, and if it is freshly soiled, the items are washed well in this mode.
- Super fast wash 15 minutes. Used to simply freshen things up. The washing intensity in this mode is higher than in the 30 minute mode.
- It is important when washing on the last two modes (15 and 30 minutes) not to overdo it with the amount of powder. Otherwise, there is a high probability that in such a short time the machine simply will not be able to rinse things well. And in these modes you cannot use the additional rinse cycle.
- Silk. Use this mode to wash nylon tights to avoid the formation of stretch marks.
- Wool. This mode was not very successful for the manufacturer. The washing intensity is very, very low. Things just lie in soapy water. And only sometimes the machine makes revolutions. Even very strong stains cannot be removed. It's easier to wash by hand. However, for some reason the rinsing takes place in the usual intensive mode...
- Spin. A very necessary function in this washing machine, which will thoroughly squeeze out every last drop of water.
- The maximum number of spin revolutions is 1000.
Washing modes
Each user quickly gets used to his technique and regularly uses certain programs. Bosch developers have provided the machines with the necessary washing modes - from 12 to 16 options, depending on the model.
Panel SMA "Bosch"
The set of basic Bosch CMA programs includes:
- "Cotton";
- "Synthetics";
- “Quick wash.
Among the special installed programs it is worth noting:
- "Jeans";
- "Pooh";
- "Baby clothes";
- "Sportswear";
- "Wool";
- "Silk";
- "Pre-soak";
- "Removing stains."
Expert opinion
I work in the household appliance repair industry. Extensive experience in restoring washing machines and dishwashers.
Ask a Question
The desired program is selected using a rotary switch, each of them is signed and marked with a specific symbol. If you have any difficulties deciphering the icons, please refer to the user manual.
Installation of the device
Before operating the washing equipment, it is necessary to remove the transport fasteners. They may be needed in the future when transporting the device, so they should be saved.
Four bolts are located at the rear of the machine. Unscrew them using the SW 13 key. You need to insert plugs into the bolt holes.
The installation location of the device plays a very important role. The stability of the machine will depend on it. Washing equipment should be placed on a smooth and hard surface. There should be no carpet or other soft coverings on it. It is advisable to install the device on a tiled or concrete floor.
If installation will be carried out on a plank floor or plinth, then the surface must be prepared in advance. In this case, a water-repellent wooden board with a thickness of 30 millimeters is screwed to the floor. And the legs of the washing machine need to be secured with special retaining tongues WMZ 2200.
Bosch Maxx 4 can be placed under a solid countertop. In this case, instead of a plastic top cover, a cover made of sheet metal is installed.
The inlet hose is connected only to a cold water supply.
There are several connection methods:
- To a separate pipe;
- To the kitchen sink faucet;
- To the bath faucet.
Regardless of the connection method, the end of the inlet hose should be screwed to the 3/4 thread of the tee tap. And the other end should be connected to the washing machine. To ensure a tight connection, rubber gaskets must be used.
The hose has plastic nuts. Therefore, you need to screw them on by hand, without over-tightening. The inlet hose must be taut. Make sure it doesn't bend.
You can drain the water into a siphon, bathtub or sink. The first option is the safest and most aesthetically pleasing. The drain point should be located above the floor at a height of 60 centimeters. The hose must be secured with a clamp to the siphon outlet. This will prevent leaks and unpleasant odors.
After connecting the hoses and installing the device in place, you can begin to level it. This is done using locknuts located on the front legs of the machine. For leveling you will need a building level. The unit must be installed so that the angle of inclination is less than two degrees.
Washing equipment must be connected to a moisture-resistant socket with grounding, located no more than 100 cm to the left of the machine and 150 cm to the right. If there is no such outlet, you should call an electrician.
How to enable child lock
Bosch designers have provided a useful feature - the ability to lock the control panel from children. To activate and remove the protection, you must press the start/pause button and hold it for 5-8 seconds. A key icon will appear on the display.
Bosch washing machines are able to remember the modes that the user selects, so the next time you turn it on, the lock will continue to operate. This will prevent you from setting the desired program.
The problem is solved by holding the start/pause button. It may be easier to immediately remove the lock and turn off the machine immediately after finishing washing.
Washing machine BOSCH
Why are icons needed?
If you write all the options in words on the control panel, it will be completely covered with inscriptions - this is inconvenient to read and complicates the search for the desired mode. So that the user can quickly find the desired function, associative pictures are used that make them think about a specific process. The pictures are easy to remember, the main thing is that once you find out what they mean, it will be easy for your memory to choose the right option.
The manufacturer used intuitive drawings to indicate options. For example, a butterfly. Most people associate it with tenderness and lightness. It is not difficult to guess that we are talking about a delicate washing mode. Users with insufficiently developed associative thinking may have difficulty deciphering pictures on their own - the instructions will help them. Advantages of drawings over inscriptions:
- take up less space;
- informative;
- easy to decipher.
One small picture can contain the amount of information presented in 2-3 sentences.
Expert recommendations
To prevent the appearance of mold that is dangerous to human health, take care of your machine after each wash:
- Dry the detergent tray.
- Wipe the door and sealing rubber with a dry cloth.
- Leave the hatch open for ventilation.
Interior and exterior surfaces should be cleaned regularly with a mild detergent. You can clean the machine using folk methods based on the use of such improvised substances as:
- soda;
- vinegar;
- lemon acid;
- laundry soap.
Use gloves to protect your sensitive hands from exposure to various substances.
Modern household appliances are simple and easy to use and at the same time solve a lot of household problems. The developers of Bosch washing machines have equipped the devices with all the necessary programs and options. The user can only use them correctly and take care of his equipment.
Video
Equipment care
When connecting and operating a Bosch brand washing household appliance, it is very important to understand and follow the basic rules specified in the instructions for use. Then the machine will serve you for a long time and without malfunctions. The characteristics of this particular model require periodic cleaning of the unit. Disassembling and cleaning a washing household appliance takes just a few minutes. You can easily do this yourself. It is produced in the following way:
- Initially, you need to disconnect the machine from electricity;
- The body can be wiped with a mild soap solution, then be sure to wipe dry;
- A couple of times a month, you need to wash the powder receptacle of the machine to remove conditioner and powder residue, first study the instructions and understand its structure so as not to accidentally damage it;
- The characteristics of the machine suggest the accumulation of dirt residues and fabric elements after spinning in the rubber door seal, so it should also be wiped;
- Drain hoses and filters sometimes need to be disconnected and cleaned; they can also be easily disassembled and cleaned in just a few minutes.
Safety precautions
To avoid repairs, it is very important to follow the safety measures described in the instructions for the machine.
The most important thing is to connect it correctly to all systems. In addition, under no circumstances should the unit be overloaded. Loading items into the drum should be done strictly in accordance with the instructions. It is equally important to choose a program suitable for the fabric in accordance with its composition and the size of the laundry. By following the rules specified in the instructions, you will extend the life of your assistant for many years.
Disadvantages of the model range
However, there are also disadvantages:
- Water accumulates under the drum collar, which can cause mold to appear. This problem applies to absolutely any model of washing machine, regardless of the manufacturer. To avoid the formation of mold, it is recommended to remove any remaining liquid and moisture with a dry cloth.
- In some modes the waiting time is quite long. This is due to the specifics of program cycles. Almost all Bosch Classixx 5 models have the ability to select a fast mode, which significantly saves time when washing things without heavy soiling.
Useful tips
The conventional images used in Bosch devices are in many ways similar to the images printed on clothing labels. This makes choosing the appropriate mode easier. Selection tips:
- Be sure to study the label attached to the clothing - decipher the icons depicted on it.
- Find out exactly what effect a particular option will have on a particular item before you install it.
- Do not load white and colored items into the drum at the same time.
- For expensive delicate items, it is better to choose hand washing.
- Try to wash things in special bags. This applies, first of all, to shoes, linen and products with accessories.