Friends, I won’t lie, I have long fallen in love with the official Nike silicone straps for Apple Watch. My favorite pairs are the Obsidian/Black and Pure Platinum/Black pairs and these are the ones I wear most often.
Of course, I have no problems at all with the dark blue grille: it is dark, so it does not stain clothes, and dirt is not visible on it. Another thing is white with a black backing. After a day of active wear, it is all stained...
Good thing I found a way to clean it quickly!
How to care for a silicone strap?
Dilute a little liquid soap in water until foam appears. Rinse the strap with the resulting liquid. Then rinse it with clean fresh water and dry it with a soft cloth. It is recommended to wash the strap with soapy water every 1-2 days.
Interesting materials:
What is the correct form of secondary specialized or secondary specialized education? How to properly cut basil for drying? How to install the antenna correctly? How to properly place cups on your back when coughing? How to place your fingers on the strings correctly? How to set goals for yourself? How to properly install handles so they don't leak? How to put the right emphasis on marketing? How to correctly emphasize report or rapport? How to give Meloxicam injections correctly?
Use a melamine sponge for this.
Interesting fact: once I even tried to remove such stains with nail polish remover - it didn’t help
. Yes, branded silicone straps for Apple Watch can be easily cleaned with a melamine sponge. But how do I know this?
About three months ago, furniture maker Vadim, who worked on the kitchen for my small apartment, advised me to use melamine sponges to clean the countertops and facades. Matte white furniture easily absorbs dirt, so the question turned out to be difficult.
I first researched local stores, and when I didn't find anything useful, I ordered a pack of melamine sponges from AliExpress.
This dirt is already ingrained, it cannot be washed or washed off without special means.
A month later I had a box of sponges.
With their help, I easily cleaned not only the countertops and facades in the kitchen, but also removed stains from painted walls, brought my AirPort Express, as well as the treasured white Apple Watch strap, to new condition.
Melamine sponge on AliExpress (from 5 rubles per piece)
How to Clean Gold, Silver and Steel Watches
A gold bracelet should be polished using baby powder, cosmetic powder or crushed chalk. Sprinkle a little product onto a dry flannel cloth and thoroughly polish the surface on each side, then wipe with a dry, clean cloth. No water is used to clean gold! Therefore, be sure to take dry cloths.
To clean a silver bracelet, mix vinegar or ammonia with baking soda. Apply the composition to the surface of the product without rubbing, and coat every crack. Leave for half an hour, then wipe with a damp cloth and polish with a cloth or microfiber cloth.
A mixture of baking soda and vinegar can also be used to clean steel bracelets. You can also use regular hair shampoo, a mild kitchen detergent, or a mild dishwashing gel for cleaning.
Dilute this product with water, place the product and leave for 30 minutes. Then the strap is cleaned with a cotton swab or toothbrush and rinsed with running water. After this, wipe the surface with a dry cotton or microfiber cloth.
Liquid soap
The habit of using an automatic washing machine “sparingly” can lead to the appearance of an unpleasant odor in it. Washing at temperatures below 60℃ and short rinses allow fungi and bacteria from dirty clothes to remain on internal surfaces and actively multiply.
Expert opinion
Alexandra Poryadkina, cleanliness expert
Please contact me with any questions!
After this, take a brush and use gentle polishing movements to remove dirt from the surface of the silicone. If you strictly follow all the tips for using your watch, this will not protect you from getting the strap dirty. How and with what to clean a leather strap For advice, contact me, I will definitely answer!
Which bracelet should I buy for Mi Band 2?
Dark colors
If you don’t want to constantly clean your bracelet from dirt, then the best solution is to buy a black bracelet. Over time, it will also get dirty, but it will be at least less noticeable.
Verified stores
If the black color is not suitable and you need something lighter or brighter, then you will have to come to terms with the fact that you will have to change the strap periodically.
Leather straps
Silicone straps, no matter how high quality they are, still get dirty quite quickly and in this case the best option would be to buy. They are reliable, look more classic, and also have a metal capsule, which makes the tracker look more expensive.
Metal bracelets
Silicone and leather straps for a fitness bracelet are quite common, but the industry has gone even further, so you can even purchase one for the Mi Band. It does not have to be washed and replaced every few months, like silicone.
Silicone with pattern
If you are ready to exchange a silicone bracelet only for a silicone one, then we recommend paying attention to bracelets with a pattern and various perforations. Your Mi Band will not be like others with bracelets that are already in the KTS network.
If you were able to restore your bracelet to its original form using a special solution, great. If not, you should replace the old strap with a new one: leather, metal or silicone with a pattern and perforation. The choice is yours; besides, they are all available on the KTS network. How to clean white leather goods.
Faux leather
Preventive measures
Don’t flatter yourself too much - faux leather straps, in principle, cannot last longer than genuine ones, no matter how well they are cared for. The loads that the hand creates during active and prolonged wear of watches with such straps are quite traumatic for their initially very attractive “external image”. Therefore, when using them, it is enough to adhere to the same recommendations that we described earlier for leather straps, and then, of course, as God willing.
Cleaning
Faux leather straps are wiped with a soft sponge or cotton swab soaked in a warm solution of detergent for synthetic fabrics, trying to avoid excessive wetting of both sides of the strap and its internal contents. Residues of detergent and excess moisture are removed first with a slightly dampened and then dry soft cotton cloth. Dry the straps in a straightened state at room temperature.
Naturally, it is useless to soften and treat artificial leather with oils; in this case, it is better to wipe it with silicone glitter to make it look a little “fresher.”
Main conclusions:
- Make a solution: half a liter of water, a couple of drops of shampoo, one tablespoon of ammonia. Wipe the surface with a soft sponge soaked in this solution. Then wipe dry with a clean cloth.
- Soak a cotton pad in lemon juice and wipe the strap.
Apply a little powder to the case, then moisten the toothbrush with water and begin cleaning the product. Treatment with citric acid gives an almost instant effect, and you will see how the surface brightens. At the end of the procedure, rinse the accessory well with running water and wipe with a dry, clean cloth.
I have another cleaning method for you.
By the way, if the strap is too dirty and the melamine sponge no longer helps, you can use it together with window cleaning liquid - it won’t make it worse
Before I discovered melamine sponges, I used mirror and window cleaner to clean .
As far as I understand, in this case, alcohol, which is included in most of these products, helps get rid of dirt.
I simply sprayed the strap generously with liquid and then wiped it with a regular sponge. The result was almost always not much worse than using a melamine sponge.
Things to remember
You cannot soak the bracelet for a long time: not every coating will react happily to this. It may change color or fade.
Also, do not clean the bracelet with abrasive agents: undissolved soda, sand, etc. This can scratch or erase the bracelet's protective coating.
If the watch is expensive and you are afraid to take risks, then it is better to take the watch to a service center: the dirt will be treated with an ultrasonic cleaner, and the stains will be safely removed. In addition, it can be difficult to remove the bracelet from the watch yourself, and soaking the bracelet together with the watch is strictly forbidden.
Alcohol
- Do not use prohibited aggressive agents, solvents or abrasives for cleaning. They destroy the structure of silicone, leaving scratches and cuts beyond repair. In addition, there is a high risk of getting a chemical burn to the skin or respiratory tract;
- Remove fresh dirt from the surface of the cover every day without waiting for it to dry. To do this, you should always have wet wipes on hand;
- It is necessary to use a soap solution for regular care at least once every few weeks. This method must be used even in the absence of visible traces of contamination.
To ensure that your watch strap always looks clean, certain conditions must be observed. The main thing is to clean not only when it becomes visible. The watch is constantly on your hand and is covered with dust and city smog. It is worth cleaning your strap especially often in the summer. Then you can safely complement your look for hours.
We clean the case using aggressive methods
Most contaminants can be dealt with using gentle methods, if necessary, repeating the treatment several times or using several compounds in succession. If these methods of dealing with stains do not lead to the desired result, then you can use aggressive mixtures.
Attention! It is important to remember that the result may be unpredictable, and the case may be irreparably damaged. The chances of complete cleansing and loss of original appearance are almost the same.
Boric acid and alcohol
To work, you will need boric acid, industrial alcohol and dishwashing detergent. Cleansing is carried out according to the following algorithm:
- Soak a cotton pad in industrial alcohol and wipe the case to remove fingerprints or oily stains.
- Prepare a solution of 3/4 water, ¼ boric acid and a few drops of dishwashing detergent.
- Pour this solution into the case and leave for 1-1.5 hours.
- Treat heavily soiled areas with a soft toothbrush.
- Rinse in running water and wipe dry.
High quality silicone will not change its properties as a result of such treatment. But the design applied to the case may fade slightly or be partially erased. Cheap products are likely to deteriorate after such treatment, lose elasticity or become deformed.
Chlorine bleach or sandpaper
These two remedies should be used only in extreme cases, when replacing the cover due to severe contamination is almost inevitable. You can try to clean such a product using aggressive methods, keeping in mind the high probability of its final damage.
- soaking in concentrated or diluted chlorine bleach. The processing time should not exceed a few minutes;
- cleaning using powders containing abrasive substances;
- cleaning individual elements using fine-grained sandpaper.
Important! If the case was originally purchased at a low price and the quality of the silicone from which it is made is questionable, then it is better not to waste time on processing and purchase a higher-quality replacement option. Low quality material will not withstand such aggressive measures.
What to do with a bracelet made of gold, titanium or ceramic?
Gold watches require the same care as other products made from this metal. It is soft enough that if you try too hard it can be scratched. Therefore, you need to act carefully, but with caution. It is convenient to use a toothbrush, the bristles of which will penetrate even into hard-to-reach places on the watch. Just choose the best one for children, very soft. It should be moistened with water, then walk along the entire bracelet, not pressing too hard.
Advice
Gold watches can be polished using regular cosmetic powder applied to a soft cloth.
If you couldn’t clean your gold watch or bracelet with regular water, you can use toothpaste. The foam on the brush may soon darken. This should not cause concern: dirt comes off this way, and quality products cannot be damaged this way. The toothpaste must be completely removed after completing the procedure: if the watch has metal parts, they will begin to rust.
If you have a question about how to clean the ceramic bracelet on your watch, it is very easy to do. The material is stable and not subject to corrosion or other damage. It is enough to wipe the bracelet with a soapy rag so that it returns to its original appearance.
The watch adds a stylish touch to any look. If you care for them correctly, they will last a long time.
How to clean a stainless steel watch bracelet
- Soda and water solution for skin;
- A solution of water, liquid soap and ammonia for leather and silicone;
- Protein and milk solution for white and fair skin;
- Polish with powder, baby powder or crushed gold chalk;
- Soda and vinegar solution for silver and steel;
- Dishwashing detergents for fabrics;
- Toothpaste or laundry soap solution for plastic and rubber.
Choose protection that matches your phone model. An accessory that is too large will not ensure the safety of the device, and a small one can cause harm by exerting excessive pressure.
