We sometimes get paid at no cost to you for the links you click. Learn more about why you should trust our reviews and view our disclosure page
Folding an air mattress is actually not a difficult task. You can fold a mattress yourself, but like everything else in life, it's easier when you have company. First you need to release all the air and fold and/or roll it a couple of times. If you do it well enough, it might even fit in the original box. However, there are some additional measures to consider if you want to pack up your mattress and put it away.
How to fold an intex mattress into a box with a pump
In order for an air mattress to last a long time, it must be carefully folded and stored correctly.
The storage place must be dry and warm, since the mattress material becomes hard in the cold, the folds freeze and cease to be elastic. With further use, cracks and small holes may form in these places. First of all, you need to clean the mattress from debris, especially the flocked part, because... It is mainly where dust and debris are retained. This can be done with a damp cloth or vacuum cleaner, and it is easier to cope with this task when the mattress is still inflated.
Before laying the mattress, you need to release the air from it. This can be done in different ways. The simplest is to unscrew the valve and leave the air mattress for 5-10 minutes. You can also simply pump out air with an electric built-in pump by turning the valve control wheel in the opposite direction and turning on the pump (if you are using a mattress with a built-in electric pump). You just need to monitor the process: adjust the mattress and turn off the pump in time when there is no air left inside the mattress.
The simplest and most convenient way to lay an air mattress is as follows: you need to fold the mattress in half lengthwise and then roll it into a roll. If the mattress is large, then you need to fold it several times. It is important to start rolling up the mattress on the side opposite to where the valve is located so that any remaining air can escape through it without hindrance.
If treated with care, the air mattress will serve you for a long time and will delight you with its convenience and ease of use. A good sleeping place will not hurt either at home or in a tent.
Source of the article: https://mir-intexa.ru/articles/39/kak-pravilno-slozhit-i-hranit-naduvnoy-matras.html
Method No. 2: using a soap solution
We will act according to the following algorithm:
- Add a little dishwashing liquid (soap solution, liquid soap, shower gel or shampoo) to the spray bottle so that there is enough soapy water to cover the entire surface of the mattress. An alternative to a “sprinkler” would be a sponge or cloth soaked in this solution.
- How to find a hole in an air mattress at home? Fill it with air and spray, wipe the entire surface of the product with soapy water, starting again with the valve and paying special attention to the seam areas.
- Now watch carefully - where the soap bubbles appeared, there will be a place for air leakage.
- Trace the leak with a permanent marker or mark it with a piece of tape or a sticky note.
- The next step is to be sure to dry the mattress 100%. Only after this will it be ready for storage and repair.
How to fold an air mattress
Air mattresses and air beds can serve as an alternative to conventional sleeping furniture, as a swimming device, and as a picnic lounger - there are a variety of models. If, upon purchase, an air mattress fits into a small compact package, then after the first use you may feel perplexed - how did this thing fit into such a small box? Travelers often experience similar feelings - it is very difficult to pack a suitcase neatly after a vacation, and, often, things are simply mercilessly compacted.
Content:
If you are familiar with the large-scale task of furnishing your home, for example, when buying a new apartment, then you probably understand that you can still live without a table and a closet, but the problem of sleeping space needs to be solved immediately. What to do if a regular frame bed with a mattress is not yet affordable? Think about an air bed or, in extreme cases, an air mattress.
In terms of convenience, inflatable furniture is in no way inferior to classic frame furniture, but its price is 10 times lower. By becoming the owner of such furniture, you solve several problems at once: the availability of sleeping places and places to relax, saving money and preserving the free space of the room. However, do not forget that inflatable furniture is inferior in strength to traditional furniture. Plus, your pet can easily make it their scratching post. How to be? Learn about the basic nuances of using, caring for and storing inflatable furniture. We'll talk about them further.
Features and Tips
Inflatable beds are products that can be damaged quite easily. There are often cases when an air bed simply breaks when an impatient owner tries to fold it without waiting for the air to completely escape. Compliance with the air release rules is the first thing that owners of inflatable furniture should remember. Before folding the mattress, make sure all the air is completely out of it. You can bleed air using an electric pump in reverse mode, but do not forget to monitor the process - if you forget to turn off the pump in time, this can lead to a rupture. If you don’t have such a device at hand, just open all the valves and be patient. You should not press with all your strength - yes, this will somewhat speed up the process of deflating, but the risk of ruptures will also increase.
Even before the air is deflated, it is worth cleaning the mattress - you can, of course, do it after, but it is much more convenient to clean the dirt from an inflated one. You should pay special attention to the “rough” surface – this is where the most dust and dirt accumulates.
If you used the wet cleaning method, wait until the mattress is dry - storing it in a humid “climate” will definitely not do it any good. For washing, you should use only a weak soap solution - no “chemicals”! Do not use a hard sponge - scratches may remain on the surface.
So, the surface is dry and clean, all the air has been released - you can begin the folding process. The best way is to carefully roll up the mattress and place it in a bag or box. Of course, this way it will take up more volume than when purchased, but you need to remember that you can return it to its full factory packaging dimensions only if you have a special machine for vacuum packaging. If you don't like the roll or it doesn't fit, just carefully fold the mattress in half several times.
So, let's repeat what needs to be done to fold an air mattress:
Clean from dirt and dust (use a vacuum cleaner or a damp cloth); Gently release the air, avoiding strong pressure; Fold in half and roll into a roll.
If you follow all the rules, the mattress will last you a very long time. It should be stored in places inaccessible to pets (so that sharp teeth and claws do not shorten its service life). Also keep it away from fire and sharp objects. Of course, if trouble does happen, you can always repair it, but any trouble is easier to prevent than to fix.
Source of the article: https://matrasnic.ru/naduvnye/kak_slozhit_naduvnoj_matras.html
When there is no need to rush
If you have a lot of time or you are not in a hurry to inflate or deflate the mattress, you can act in the following ways:
- In nature, you can inflate a mattress by filling a large garbage bag with air, which you then attach to the air valve of the mattress.
- You can deflate an air mattress by simply opening the valves and leaving the product in this position for several days. But this is only if the item does not have additional built-in safety valves against accidental air leakage.
So how to fold an air mattress?
First of all, the air mattress must be dried well so that mold does not form during storage. It is necessary to dry the mattress naturally, away from open flames and heaters, so as not to damage it.
If the mattress becomes dirty, clean it with a gentle soap solution. Do not use chemicals or products containing abrasives.
After drying, deflate the mattress completely. This can be done simply by opening the valve or using pumps that have a download function. Air mattresses with a built-in electric pump are the easiest to use, as they inflate and deflate on their own in a couple of minutes.
Once the air from the mattress has been completely released, you can easily fold your air mattress like a sheet. If the kit includes a special cover, then roll the mattress and place it in the cover.
Repair
Even if you strictly follow the rules for using inflatable products and follow all the manufacturer’s recommendations, the mattress or bed may require repairs. Punctures on the surface can appear for no apparent reason and become an unpleasant surprise for the owner. The problem can be resolved quickly and often at minimal cost.
There are several ways to determine the location of the damage:
- Try to determine by ear the place where the air comes out;
- Use a soap solution to detect a puncture;
- Place the air mattress in the water and watch where the air bubbles come from.
A special repair kit is used to repair a puncture. It is usually sold with the mattress, but can also be purchased separately. The use of improvised means is also allowed. You will need a small piece of rubber, for example, from a swimming cap, and glue suitable for gluing rubber surfaces.
The size of the patch should be 1.5-2 cm larger than the damage site. The gluing area must first be degreased and treated with sandpaper for better adhesion of the surfaces. How much time should pass from the moment of repair to the start of operation depends on the type of glue used and the recommendations of its manufacturer.
A high-quality repair will allow you to use the bed for a long time, so if a puncture is discovered, you should not immediately think about buying a new inflatable product. Repairing an existing one is quite simple and inexpensive.
How to fold an air mattress into a box?
Do all the same manipulations described above. If the air is completely released, the deflated mattress easily folds into the size of the box and is stored in it.
Follow the rules for using an air mattress, then it will not disappoint you and will give you calm and comfortable dreams for many years.
You can purchase inflatable furniture for your home and garden in the catalog of the VseDlyaSna.ru online store, where you can find:
- air mattresses and beds;
- inflatable chairs and sofas.
Comfortable sleep anywhere? Choose air mattresses!
Source of the article: https://matrasy.vsedliasna.ru/articles/kak_pravilno_slozhit_naduvnoy_matras.html
Instructions for air beds with a built-in electric pump.
Thank you for purchasing the Intex air bed. Please take the time to read this manual for using the bed. This information will help you extend the life of the inflatable bed and will allow you to secure any activities related to the bed.
Safety regulations.
Before use, read the instructions and carefully follow all instructions. Children near the bed should always be within the sight of an adult; do not leave children unattended while using the air bed. The bag intended for storing the air bed must be kept out of the reach of children; this bag is not a toy. Do not stand on the air bed or use it as a trampoline. Do not use the bed in or near water, this is not a swim mattress. Do not place the bed near stairs, doors, water, fragile dishes or sharp objects. Make sure that the surface for placing the airbed is flat and smooth, without any sharp objects that could cause a puncture. To avoid damage from pets, keep them away from the air bed. For greater stability, you need to lie not on the edge of the bed, but in its center. Do not use the pump for more than 5 minutes, you need to take a break for 10 - 15 minutes, after use, disconnect the power cord from the network. While the pump is operating, the ventilation duct must remain open and no objects should be allowed into it. If the power cord is damaged, it must be replaced either by the service or by a person competent in this field. To reduce the risk of electric shock, do not use in the rain. Store indoors.
Accessories.
Components for an air bed with a built-in electric pump.
AC Electrical cord. Switch. Pumping sign. Blowing sign. Air channel. Control wheel. Cord cover. Inflatable bed.
* The pump does not require special maintenance. The bed must be installed close to an outlet.
Pumping up. Remove the power cord from the storage container. See fig. 1. Connect the AC electrical cord to the power source. See fig. 2.
Turn the control wheel to o. See fig. 3. Press "I" to turn on the pump. See fig. 4. After inflating, press “O” to turn off the pump. See fig. 5.
Lie down on the bed and check the firmness. If the surface is too hard, turn the control wheel counterclockwise. The air will begin to bleed through the air channel in the center of the wheel. When the required stiffness is achieved, turn the wheel clockwise. See fig. 7. If the bed needs to be made harder, repeat steps 3 - 7.
After inflating the bed, disconnect the cord from the power source, place it in a storage container and close the lid.
Important note.
Correct inflation of the bed.
The ambient temperature has an internal pressure effect on the air bed. When the temperature is low, the air will compress inside the bed and the bed will become softer, add air as needed. At high temperatures, the air inside the bed will increase significantly in volume, the bed will become hard and may burst. Vent the air to prevent damage to the air bed or to reduce the sensation. Do not expose the bed to extreme temperatures (high or low).
Here's how to easily fold an air mattress
You've inflated your mattress, slept on it for a while, and now it's time to put it away.
Why even worry about folding an air mattress when you can just crumple it up and stuff it in your bag? Here's why: Improper handling of air mattresses results in air leaks, broken seams, or other types of damage that can lead to unintentional deflation.
First, make sure you don't rush and go into panic mode - you should take your time and take things slowly and without rushing. Follow the instructions below to fold your air mattress correctly.
Step 1: Deflate the air mattress.
The process of deflation is usually simple. First, place the mattress on a flat surface (without objects underneath) and without any bedding on top.
Most air mattresses have one valve specifically designed to release air. Even if yours doesn't, find and open the valve and let the mattress begin to deflate.
If your mattress has an electric pump that can deflate it, such as the Intex air mattress, take the power cord and plug it into an outlet. Select the deflation mode on the control knob and turn on the pump - the mattress will begin to deflate. Once the bed is completely deflated, turn it off. Now reset the boost control settings so you have the correct setting ready for next time. Unplug the cord from the outlet and reinsert it into the cord compartment.
Step 2: Prepare the mattress for folding
We remind you that all this is done on a completely flat surface, preferably on the floor, without sharp objects. While working, remove any jewelry from your hands.
If you're going camping, find a level spot and check the ground. Remove pebbles, pine cones, branches, etc. Ideally, place a large plastic sheet on the ground to further protect the air mattress. Make sure there is no dirt on the air mattress.
Okay, you managed to deflate the air mattress, but it's still not perfect. There's a little air here and there. Smooth out all the wrinkles with your hands and make it completely flat so that there is no air left.
Step 3: Fold the Air Mattress
If you want to return the mattress to its original packaging, you should remember exactly how it was packaged - was it simply folded or rolled up too? In fact, returning to the original way of folding your air mattress will keep it in great shape for a long time and take up much less space.
Fold and Roll: One way to fold an air mattress is to first fold it in half lengthwise. Make sure all the edges line up perfectly and then smooth the folded mattress out again. Now roll it slowly from side to side, making sure it fits snugly.
How to properly store an air mattress
Once you are done deflating and folding, place the air mattress in the storage bag. You probably received some kind of bag that serves both storage and carrying purposes. If you don't have one, find a bag made of durable material that can protect it well. This could be, for example, a thick plastic bag.
Now place the film in the original box or thick cardboard box and secure it with duct tape. Or, better yet, use a well-made plastic storage container. This is not necessary if you are going to store it on a shelf in a room with a relatively stable room temperature.
However, you should definitely avoid storing an air mattress directly on the floor if there is a chance of leaks, flooding, or if someone could stack other items on top of the mattress itself. You can put things on top if the air mattress is in a sturdy container.
Store it in your desired location
Look around your pantry. Ideally, it should not be wet or humid, and the temperature should not fluctuate much. Some places have temperatures around freezing in the winter and around 110 ° F in the summer. This may be too much for an airbed made from plastic-based materials like vinyl and PVC, so don't store it in a garage with a bad door if you no need for a damaged air mattress.
If you decide to go with mattress storage without a container, keep it away from sharp edges or objects that could fall on it and damage it, but also keep in mind that no container means less protection.
What you should know about operation
Like any product, an air mattress requires compliance with operating rules.
- Firstly, the product is not intended for use at low temperatures. An air mattress is not capable of retaining the heat given off by the sleeper’s body; in itself it is not an effective insulator (against a cold floor or ground); in the cold, the covering material becomes hard and brittle.
- Secondly, it is important not to overdo it with the degree of rigidity and choose the pressure depending on the body weight of the person who will rest on it. It is not necessary to inflate the product to 100% (but to more than 80% of the total volume of the internal chambers).
Reference! Keep in mind that the first few nights the mattress may deflate slightly in the morning. This is normal and is due to the fact that the product is slightly stretched. In view of this, it should be pumped up for the first few days.
- Third, check the manufacturer's recommendations regarding maximum loads for the product. Some double models can support weights up to 295 kg. Exceeding factory specifications may result in seam rupture. Repairing such damage is quite problematic.
Bottom line
How to fold an air mattress is not a science. First deflate the mattress on a flat, clean surface by removing the plug and opening the valve. The next step is to prepare the air mattress by pushing out excess air and leveling the surface of the mattress.
Then fold the mattress. Ideally, fold it the way it was when you bought it. Some of them were folded in half and then rolled, and some were folded into squares. Alternatively, you can simply collapse it if your model allows it. If you have an Intex air mattress, make sure the plastic box containing the electrical components is on the outside of the folded mattress.
Place the mattress in a carrying bag or storage bag, and then leave it in a sturdy storage container. Airbeds or air mattresses should be stored in a dry area with some temperature control.
Follow this process and your air mattress will be as good as new and you'll be sleeping on it like a baby for a long time to come!
Reviews of related products:
Psst. The sleep review industry is full of liars, sharks and thieves. It's the modern version of getting ripped off at your local mattress store. So why should you trust us?
Do two twins make a king size bed? (Accurate measurements)
Not really, but you can still use two Geminis. A regular double bed is slightly shorter than a king bed, but is exactly half the width... Read more » Do two twins make a king size bed? (Accurate measurements)
Purple Mattress Warranty (Bed Warranty)
The Purple Mattress Warranty covers the entire Purple mattress line. It is important to understand the warranty coverage of your new mattress so that in the event that you may have to... Read More » Purple Mattress Warranty (Bed Warranty)
