How to sew a denim skirt at the waist on the sides at home without a machine

How to sew a denim skirt - simple and beautiful

Denim never goes out of fashion - despite its practicality, it looks elegant. So any fashionista will definitely have a few denim items in her wardrobe that she doesn’t want to part with.
You bought a skirt that you liked, but it fits a little loosely, or you lost a little weight, in any case, you will have to sew the thing up. After all, the main guarantee of elegance is “that the suit fits.” And a woman will feel more confident if the things she wears fit her figure.

Clothes hanging loosely on the hips will ruin the charm of your appearance. Even the presence of a fashionable belt will not save the situation, emphasizing even more the inconsistency of the outfit with the figure. This is where it’s time to think about how to sew a denim skirt if you want to look elegant.

The specificity of some denim seams implies the presence of tailoring skills in alterations. Poor quality repairs on this product will be immediately noticeable. Therefore, when starting such repair work, it is necessary to study the technology of the process.

Moreover, you should also determine where the product requires adjustment - in the belt or on the hips.

We sew in the waist

Most often, adjustments to denim skirts are required in the waist area. At home, such an alteration can be done without problems, provided that the back seam on the product is overlocked and not replaced with a double stitch.

In the second option, you will need not just the hand of a master - you need a professional sewing machine, since not every home machine is capable of taking such a line. Manual repair, especially of denim products, is not carried out.

A seam finished with overlock is easy to adjust and includes the following algorithms:

First you need to remove the belt loop located in the middle of the belt on the back side (this is the part through which the belt is threaded).

Then the belt is trimmed to the left and right of the seam by 8-10 centimeters and cut in the center.

Rip the seam from below and up to the yoke (or to the hip line), freeing this area from the overlock.

The middle seam is adjusted to the desired fit length using a basting stitch.

If the fitting went satisfactorily, you can stitch the seam on a machine.

Having trimmed off the excess, the edges are overlocked together (or processed with a zigzag stitch), folded and the front stitching is restored.

The belt is shortened to the required length (on both sides of the incision) and stitched. Having placed it on the skirt, attach it with a front seam.

Now you can put the belt loop back in place.

That’s all the “passion” on the topic of how to sew a denim skirt at the waist. And if you are wondering what to wear with blue women's trousers, then follow the link and get detailed information.

How to reduce the volume of a skirt with an elastic band

It's very easy to shorten a skirt with an elastic band. Take another elastic band of shorter length and insert. If this option does not suit you, then you will have to rip out the top seam and stitch it in according to the example described above. When you remove the volume in the hips, fold the top hem again and insert the elastic.

You can also watch a video on how to sew a leatherette skirt at the waist and sides:

Finally, knowing how to sew a skirt in different styles will help you have clothes that fit your figure, giving you neatness and elegance.

Read further:

How to sew jeans into a waistband at home using a sewing machine and by hand

How to sew a hidden and regular zipper into a skirt of any style

How to hem a dress by hand with a blind seam at home

How to sew a wide shirt yourself

4 effective exercises for the waist: removing the sides

Exercises for a thin waist: urgent action

How to sew a denim skirt at the hips?

The principle of performing work to reduce the volume of the hip line is not much different from adjusting the waist line, except that the side seams need to be sutured.

The procedure is as follows:

To begin with, you should turn the skirt inside out, put it on and mark how much you should reduce the volume along the hips.
When the basting is ready, the adjacent belt loops are removed and the belt is ripped off.
The side seams are ripped out and new ones are formed using a basting stitch.
Having stitched the sides on a machine, the excess fabric is cut off, the edges are overlocked, ironed and, if there is a front stitch, it is restored.
With the belt you need to follow the previous example.
If there was a zipper in the side seam, it is first evaporated and transferred to a new seam before the belt is returned to its place.

Having a sewing machine and basic needlework skills at hand, the problem of how to sew a denim skirt will be solved by itself.

The denim skirt fits like a glove again

How to make a denim item smaller? If the item has become looser, that is, you have lost a little weight, then in an hour you can return it to its former “comfortability” in order to look fashionable and confident again.

The most important repair: adjustment in the waist area. The alteration will be completed without problems if the back seam is processed using an overlocker and not double-stitched.

If there is a double stitch, then only a skilled craftsman with a special machine can carry out the repair at home.

We undertake repairs if the back seam is processed using an overlocker:

We remove the loop through which the strap is threaded.
We tear off the belt, stepping back from the back seam 10 centimeters in both directions.
Cut it down the center.
We rip out the seam, reduce it to the required width, lay a basting seam, and try it on.
We stitch on a machine, remove excess fabric, process the cuts, and iron.
If there was a front stitch, then we restore it.
We make the waistband shorter, baste it, machine sew it, and iron it.
Having placed the belt on the cut of the skirt, we stitch and restore the front seam.
Sew on the belt loop.

The procedure for reducing volume on the sides:

Let's turn the skirt inside out and put it on to outline how much we will reduce the volume in the hips.
Remove the belt loops on the sides and rip off the belt.
We rip the seams on the sides and make basting stitches.
We sew on a machine according to the basting, trim off the excess fabric, process it on an overlocker, iron it, if there was a front stitch, we restore it.
We do the same manipulations with the belt.
If the zipper was in the side seam, then it must first be ripped out, then transferred to a new seam before the procedure of sewing in the belt.

We suggest you read: How to iron a skirt made of natural and artificial leather

The procedure for sewing a denim skirt yourself

Jeans is a material that has long been included in the category of undying classics. Denim has always looked stylish and elegant. In the wardrobe of many women you can find skirts made of this material. But the figure changes, and it is often very difficult to part with a favorite thing that no longer fits. In such a situation, information on how to sew a denim skirt will be useful.

Necessary to sew in a skirt at the waist

When you manage to lose a couple of extra pounds, the question arises of what to do with the things that have become large. Knowing how to sew a skirt at the waist, you can continue to enjoy not only a beautiful figure, but also your favorite wardrobe accessory.

Denim skirts are an everlasting fashion classic

You can do the alteration at home yourself. But it is important to pay attention that the back seam is overlocked. If double stitching was used instead, it is recommended to take the product to a workshop, as a professional sewing machine will be required.

Important! Repairing and hemming denim clothing by hand is impossible.

To sew a product at the waist, if the seam is finished with an overlock, you need to do the following:

First of all, the belt loop, which is located in the middle of the belt on the back, is removed. A belt is threaded through it.
The belt is cut 10 centimeters to the left and right of the seam.
The seam must be ripped from the bottom to the yoke; the overlock must be removed from this area.
Basting stitches are made along the middle seam to adjust the desired length of the product.

A few tips on how to sew a skirt

Many women really like skirts. And this is understandable, especially since the range offers various styles. Take, for example, a pencil skirt, a skirt or a pleated skirt. Each of these products has its own unique style. However, it often happens that the skirt suddenly becomes too big. Then a reasonable question arises: “How to sew a denim skirt?” or “How to sew a leather skirt?” These manipulations are quite simple and sometimes do not require special knowledge and skills.

How to sew a skirt at the waist

Today, there are many ways to reduce centimeters at the waist of a skirt. If you need to reduce the product by only one size, then proceed as follows.

the first step is fitting. It will show you how much fabric needs to be removed.
Step two - tearing off the belt and darts.
Step three - ironing the cut product. The absence of wrinkled parts will significantly speed up work in the future.
step four - calculating the size of the new darts. It will be sufficient to distribute the surplus over four future darts. Two of them will be located in front, and two, respectively, in the back. For example, if you need to sew in a skirt at the waist by 10 centimeters, then 4 darts will have 2.5 cm each.
Step five - forming darts. They are sewn by hand and then machine stitched.
Step six - ironing again. Darts are ironed towards the center. As a result, they must look at each other.
Step seven - cutting off the belt to the length to which the skirt was shortened and darts were created.
Step eight - sewing the belt to the product.
Step nine - final ironing. Actually, the new shortened version of the skirt is ready! The entire work will take no more than two to three hours. And the activity itself will definitely bring joy.

How to sew a skirt without ripping

Let's take another situation. The skirt needs to be reduced by 1.5 -2 sizes. It's even easier to do - you don't even need to rip! To begin with, as in the previous case, you need to try on clothes and determine how many centimeters are extra. Then a line is drawn on the skirt that will indicate the boundaries of the new seam. A machine stitch is laid in that place. If the product is supposed to have a belt, then you can sew directly along it. The only thing you have to watch out for is that there are no distortions. They will significantly spoil the appearance of the product. Excess allowances can be cut off and then processed with an overlocker so that the fabric does not fray.

How to sew a circle skirt into a belt

This item of clothing is usually reduced at the waist in the same way as a regular skirt in two ways:

without ripping;
with ripping.

In the first case, you can do without a sewing line and simply insert an elastic band into the belt. The second one will take a little longer. The work should begin by tearing off the belt. When this is done, it is trimmed to the required number of centimeters. Subsequently, the upper part of the skirt is gathered and the belt is re-sewn to it. The finished product must be ironed.

How to sew in the sides of a skirt

It happens that the skirt cannot be sewn in using darts or cutting the belt. Then the product should be reduced on the sides. True, one important circumstance should be taken into account here. If things are cut down by 3 sizes or more, side seams alone are not enough. Some of the material must still be “taken away” by the darts. So what are the main steps?

evenly distribute the excess on both sides of the skirt and pin it together;
turn the skirt inside out and draw a chalk line where the seams will be located;
we take out the pins, we won’t need them anymore;
check if the lines are symmetrical. If not, then we adjust;
sweep away;
try on;
if the skirt fits exactly to your figure, then we sew down the seams on a typewriter;
cut off excess material and process the edges;
Iron the finished item thoroughly.

Voila!
The skirt has again become in demand and has taken pride of place in the closet! #useful content

How to sew in the hips

The procedure for reducing volume in the hips is similar to adjusting the product in the waist area. The main difference is that the work is aimed at suturing the seams from the side.

The step-by-step algorithm of actions is as follows:

The product is turned inside out and put on to mark the desired volume for reduction.
After applying the bastings, the belt loops located nearby are removed, and the belt is unsealed.
The side seams are unraveled and new ones are basted.
The sides are sewn on a sewing machine, the edges are processed with an overlocker and ironed. If there is a front side, it needs to be restored.

The work with the belt is carried out as follows: if there is a zipper on the side, it must be transferred to a new seam until the new belt is sewn.

Trying on a skirt before sewing

How to sew on the sides

It is not always possible to adjust a denim product to size by reducing the volume of the belt or increasing the darts. Often it is necessary to suture along the entire length to remove excess tissue on the sides.

It is important to pay attention ! If you need to reduce a skirt with darts by three sizes, you should not remove excess fabric only by adjusting the side seam allowances.

It is recommended to remove some of the excess fabric into darts. This will help prevent the center from shifting to the sides. Otherwise, the skirt will look bad on your figure.

The adjustment procedure begins with a fitting, where new seams are marked. Then the work process looks like this:

Excess fabric should be evenly distributed on both sides and secured with pins.
The product is removed, and a dotted line is drawn on the reverse side where the chips were.
The pins are removed.
It is important to check the symmetry before you start basting.

Excess fabric is cut off, then the seams are processed. Finally, all that remains is to iron the skirt.

Sizing

How to stitch correctly on the sides

It often happens that when you buy a new skirt in a store, especially during sales, at home you begin to understand that it is somewhat large at the waist and “bulges” at the hips. But the product model does not allow inserting or changing darts or cutting the waistband. In this case, we sew the skirt so that it becomes “ideal”.

To begin, take the skirt and evenly distribute the excess fabric along the side seams, pin it together, giving it the desired silhouette.

Then we turn the product inside out and create the necessary contours for it - first we draw a line of pins with tailor’s chalk, drawing out the necessary outlines of the skirt. Draw a new line so that it smoothly completes the old seam. You may know that the length of the new seam will take about 10-20 cm of the skirt, the main thing is a soft, kink-free transition.

We check the symmetry of the lines on both sides and adjust if necessary. Next, use a different thread color to sew along the lines of the new seams. We try on a new skirt and sew the seams on a machine.

At the end, we cut off the excess fabric and process it with an overlock stitch.

How to shorten a pleated skirt

Often a beautiful skirt turns out to be too long. In such a situation it may be necessary to shorten it. The greatest difficulties arise with a product in the shape of a sun or half-sun. To give things the desired size at home you will need:

Mark the length of the product. To do this, it is recommended to put on shoes and look at yourself in the mirror. Having chosen the optimal length, you can make marks at this place, the fabric is secured with pins. Then the skirt needs to be removed, placed on the table and straightened.
Using a measuring tape, measure the distance from the mark to the edge of the skirt. Next, you need to mark this distance using chalk along the entire hem. All dotted lines are connected to form a new hem line.
You need to step back three centimeters from the new line. This will be the fabric reserve for folding. The excess fabric is cut off, and the cut is processed using an overlocker or overcasting line. Then the edge is steamed with an iron.
If the hem is very small, then the chalk line may overlap the decorative line at the bottom of the product. In such a situation, first of all you need to rip the stitch, then steam it, and then take measurements. When shortening a skirt with a slit, the stitching is unraveled and the bottom is ironed. Then both parts are fastened with a pin, and hem lines are drawn.

The bottom of the skirt is folded along the top line, then carefully fastened with pins. Then you need to hem the hem using a sewing machine.

Pleated denim skirt

Necessary tools for clothing repair

Beginners and experienced dressmakers know several ways to sew in the sides of a skirt at home with their own hands, and the specific option depends on the style, cut and material of manufacture. Sometimes models can be reduced in the so-called “lazy” way without ripping, but there are models that cannot be easily repaired. If the top edge is processed with a double seam, and not using an overlocker, then only a real master with a sewing machine can do the work. Depending on the chosen method, the following tools will be needed for repairs:

hooks;
ripper or scissors;
safety and tailor's pins;
ruler or centimeter;
needle and thread.

A sewing machine can also be called an indispensable attribute. Even the most careful girl will not be able to make such an even and beautiful seam, and it will take too long to sew.

Reducing volume without tearing

If the product needs to be reduced in the waistband by only 1 size, the method without ripping is ideal. They try on the skirt, draw new seam lines, and sew them down. If the seam is located in the center, then the excess fabric is removed in one seam, if on the sides - then in two.

For skirts with a belt, you can place the seams right along the top of the belt. But it is important to correctly combine the upper and lower lines. This is necessary to avoid distortions that will spoil the appearance of the product.

Suturing length

Sew the sides of the skirt

It happens that you were lucky enough to buy a good thing, for example at a discount, but it doesn’t fit well and is too big in the hips. It’s good if the item has a facing and not a belt, then we simply rip it off at the sides and turn it inside out.

We mark new side lines on the skirt, for example, stepping back from the old line by 2 cm on each side. We draw a new line so that it smoothly goes to the bottom of the product. The line may take up more than half the length, but the sides will not bubble. The same 2 cm will need to be removed on the facing, but it should follow the line of the side.

Next, we combine the top edge of the skirt (not the facing) and sew it on a machine. We cut off the excess, process the new allowances on an overlocker, and iron them with an iron. We sew the facing on the sides where it was torn off, and turn the skirt inside out.

Useful tips

Beginners are advised to follow the advice of experienced seamstresses. They will help to properly sew the product without spoiling the appearance. For those who doubt whether it is possible to sew a denim skirt at home on their own, the main tips are as follows:

90% of success in the suturing process depends on proper taking of measurements.
It is important not to hem an item without first trying it on. All defects can be corrected at the initial stage, when the seams are just basted.
All seams should always be ironed well. Only in this case will the product have an ideal appearance. Ironing must be done through gauze or thin fabric, even if the iron has a steam function.

Cosmo recommends

Fashionable haircut 2020 for thin hair - long bob: styling methods

Gel polish won't stick! What other procedures cannot be done during menstruation?

Have you lost weight or rushed to buy a skirt and it turned out to be too big at home? There are several ways to fit an item to your figure without resorting to the services of an atelier.

How to sew a skirt by hand without a sewing machine

You can not only narrow a skirt without the services of an atelier - even without a sewing machine. We tell you how to sew a skirt at the waist by hand.

You will need needles, thread and sewing hooks. First of all, put on a skirt and measure the number of extra centimeters. Set aside this distance on the waistband to the right of the top point of the fastener. Sew a hook loop there.

How to brush your teeth correctly: the secrets of a beautiful smile

Attach the hook itself to the left of the clasp. It is important to ensure that the hook and eyelet are at the same level. Fasten the hook and adjust the zipper. The skirt is ready!

Reducing a skirt without stitching

Unnecessary centimeters on the product can be removed without resorting to a sewing machine. In this case, you will need metal fasteners with hooks and a needle and thread. To understand how much to reduce your skirt, you need to try it on and mark the extra centimeters at the waist.

Next, measure this distance, divided in half, from the edge of the belt. Using a needle, sew a hook at the very top of one edge of the skirt, and a metal loop from it on the other. It is important to ensure that both the loop and the hook are at the same level.

How to sew a denim skirt

Denim is a dense fabric, which makes stitching difficult. In addition, it can have a complex shade, for which you need to choose the color of the thread. How to sew a denim skirt at the waist - we give the procedure.

Remove the belt loop located in the center of the waistband on the back side of the skirt.
Open the belt on both sides of the seam by about 10 cm and cut the fabric in the middle.
Extend the stitching from the bottom to the hip line. Manually adjust the middle seam to the required length.
Try on the skirt and, if it fits well, machine stitch the seam.
Trim excess fabric and sew with a zigzag stitch. Shorten the belt and sew the edges, placing it on the skirt.
Sew the belt loop back on.

How do you know if a dress is too big?

You should also pay attention to the following 4 parameters: waistline, shoulder seams, darts and armholes. The shoulder seams on a well-fitting item will end just below the shoulder joint. If it happens lower, the thing is too big and will not fit in the shoulders. If it’s higher, it’s too small, and the sleeves will constantly “run” up.

Interesting materials:

How to disable the Ban on mobile payments service? How to disable video playback in Odnoklassniki? How to disable sticky Shift key? How do I disable protection in Microsoft Security Essentials? How to turn off the sound of the on-screen keyboard in Windows 10? How to turn off the sound when pressing keys on Huawei? How to turn off the sound when pressing keys? How to mute the sound in a WhatsApp group? How to unscrew a hex bolt with broken edges? How to open Android via computer?

How to sew a skirt in at the waist without ripping it out

We know a great way to sew a skirt in at the waist without ripping it out. To do this, we use an elastic band, a seam ripper (don’t be alarmed, it is needed to make holes and not rip the item), tailor’s pins and scissors.

Using a sewing machine, sew the skirt parallel to the belt line, stepping back about a centimeter. Leave a distance of 3 cm from the middle of the front part or zipper.
Use a seam ripper to make holes on the wrong side of the skirt. We make holes only on the top layer of fabric, and not right through. Do them on both sides at the beginning of the seams.
Cut a piece of elastic equal to your waist circumference. Poke one end of the elastic with a safety pin and thread it through the holes. Secure both ends of the elastic band passed through the fabric with tailor's pins.
Machine stitch the elastic to the skirt. The seams should run perpendicular to the elastic.
Trim the excess elastic with scissors.

How to sew things in at the waist

Let's try to sew the skirt in at the waist without ripping it out. If the item has a facing, without a belt, then this option is just right.

Facing is the internal processing of the waist cut. With this necessary detail, the product looks more neat and fits well.

To sew a garment at the waist, prepare an elastic band, a seam ripper, scissors, and a needle and thread.

Stages of work step by step

Using a machine, sew a straight line along the facing at the waist line, stepping back from the middle of the front of the product 3 cm in both directions. If the product has a zipper, then you need to retreat from the zipper.
The width of the indentation is 1-1.2 cm. To ensure that the stitching lies evenly, use the mark on the machine table, as in the photo.

The line and indentation turned out smooth and neat.
Next, you need to make holes on the facing using a seam ripper. Just don’t poke a hole right through your skirt! Holes must be made at the very beginning of the lines.
Now take a piece of elastic equal to your waist circumference. Attach a pin to one end to prevent the elastic from slipping out. Attach a pin to the other end and pull the elastic through one of the holes. Once the elastic comes out of both holes, secure it with safety pins.
Having secured the elastic inside, machine stitch it to the skirt, using a stitch perpendicular to the running drawstring.
Cut off any excess elastic.

The skirt fits like a glove again, I didn’t have to take it to the studio!

The work turned out to be easy and not expensive at all!

To make a pleated or pleated skirt at the waist, there is one tricky trick. For this we need hooks and eyelets.

Now we sew a loop to the left of the zipper, and a hook on the opposite side. It is important that the hook and eyelet are on the same line.

Fasten the hook, tuck in the extra piece of fabric, and pull up the zipper.

All the work was done by hand, literally in a few minutes, and the thing fits the figure again.

How to sew in the sides of a pencil skirt at home

A pencil skirt is a style that should fit perfectly to your figure. If the item has become too large, it will have to be sutured not only at the waist, but along the entire length. If the skirt has darts, some of the excess fabric can be transferred there. Otherwise, we will remove the extra centimeters in the side seams. How to sew in the sides of a pencil skirt in 5 steps:

As always, before work you need to try on the skirt and determine the location of the new seams.
Pinch the excess evenly on both sides and pin with sewing pins.
Remove the item, turn it inside out and use lines to mark the places for the future stitching.
Remove pins and baste by hand.
Try on the skirt again and, if the item fits well, machine stitch it. At the final stage, carefully iron the seams.

Features of sewing a pencil skirt

This skirt model should fit strictly according to your figure. And it is important to understand that when reducing the waist, it is necessary to reshape the item not only in the upper part, but also on the sides for the entire length of the skirt. To give the item the desired silhouette, we take a few simple steps:

we rip the top of the product: turning it inside out, carefully rip off the facing (additional fabric that “hides” the upper sections);
We mark the new contours of the skirt along the sides. It is important that the line smoothly transitions into the old seam. This will help avoid “bubbles” on the sides. Additionally, the line should be long enough to complement the smoothness of the outline. Before marking future seams, you first need to measure your parameters and how many centimeters to remove on the sides;
the facing detail of the skirt should follow the lines of the top of the skirt;
Using threads of a different color, different from the skirt, we sweep away the lines of the new seams;
try on the skirt, look at the smoothness of the seams. At the very beginning, we connect the skirt with the facing and sew it on a sewing machine. Next we make the side seams;
cut off the excess fabric, process new cuts with an overlock or zigzag stitch.

Master class: how to sew a skirt on the sides and at the waist. Step-by-step instruction.

Agreement for the processing of personal data

Hereby, in accordance with Federal Law No. 152-FZ “On Personal Data” dated July 27, 2006, you confirm your consent to the processing of IP Dunaev N.A. personal data: collection, systematization, accumulation, storage, clarification (updating, changing), use, transfer solely for the purpose of collecting and transferring goods to you in your name. IP Dunaev N.A. guarantees the confidentiality of the information we receive. The processing of personal data is carried out for the purpose of effective execution of orders, contracts and other obligations accepted by IP Dunaev N.A. as binding upon you.

It is hereby specifically stipulated that you consent to the transfer of your personal data to transport companies, Russian Post or another organization through which Dunaev N.A. sends your order.

This consent applies to the following personal data: last name, first name and patronymic, email address, registration address, postal address for delivery of orders, contact phone number, payment details.