Errors in the Atlant washing machine (Atlant) on the display: description of codes F4, F9, F3, F5, F8

Today it is difficult to imagine a modern apartment without an automatic washing machine. The unit beats the popularity rating among other home appliances. This is understandable, the machine “frees the hands” of its owners. Even adherents of Soviet life are impressed by this technology.

One of which is Atlant automatic machines. They are made in Belarus. They are distinguished by quality and affordable price. But, like any other equipment, they can sometimes fail. You shouldn’t be afraid of this, because the system is equipped with functionality that helps display errors on the unit’s display. And what the most common shortcomings can be in the Atlant machine will be discussed further.

Causes of errors

Washing machines of this brand are considered good equipment. But, regardless of this, even the best one can fail and its owner is not always to blame.

According to reviews from Atlant users, it may stop working if there are problems with the electrical network. Moreover, both the outlet and the electrical system of the equipment itself. In this case, fixing the problem yourself is quite problematic, so it is better to contact a specialist.

The user will be aware of the above problem if the display shows the symbols F2, F3, F7, F12 or F13. Each of these codes indicates its own breakdown, which is associated specifically with the electronics of the unit.

For example, F2 will appear if there is a fault with the water sensor.

Or F13, in case of an electrical fault.

Codes F4, F5, F8 and F15 are also displayed if there are problems with the intake or drainage of water. The machine may also indicate that water has accumulated under it. This could be the case with the slightest defect - a kinked hose or a clogged communication line. And also in case of a serious problem associated with a malfunction of the machine’s tank. And, here, either the unit can be restored or changed.

If the household appliance does not have an electronic display

Cars with electromechanical control do not have an electronic display, so all the errors described above are indicated by the lighting of one or more specific indicators.

You can determine the breakdown using the following table:

Error code in machines with displayDeciphering the error in models without a display
SelCompletely disabling all indicators
NoneAll 4 indicators on the control panel are on
DoorThe 1st, 3rd and 4th indicators are lit
F23rd indicator lights up
F3The 3rd and 4th indicators are lit
F42nd indicator flashes
F5The 2nd and 4th indicators are lit
F6The 2nd and 3rd indicators are on
F7The 2nd, 3rd and 4th indicators are lit
F81st indicator is on
F9The 1st and 4th indicators light up
F10The 1st and 3rd diodes are lit
F11
F12The 1st, 2nd and 3rd indicators are lit
F13The 1st, 2nd and 4th indicators are lit
F14The 1st and 2nd indicators are lit
F15All 4 indicators flash simultaneously.

Eliminating common errors of the Atlant washing machine

The unit always displays one or another error. But not everything can be fixed with your own hands; sometimes you will need the help of a specialist. But it's better than buying a new machine.

Therefore, before you buy a replacement for old equipment, you need to carefully examine the breakdown and consult with a specialist.

This will not only save the family budget, but will also extend the service of the “favorite assistant.”

As for troubleshooting the unit, the actions will depend on the type of breakdown.

If connected to electricity, proceed as follows:

  1. Disconnect the unit from the network.
  2. Remove the back cover of the machine.
  3. Remove the belt.
  4. Unscrew the bolts.
  5. Remove loose elements from the machine (engine, tachogenerator).
  6. Conduct an inspection of the entire space.
  7. Eliminate found defects.


If there are problems related to the water supply. Then the following practice is used:
  1. Turn off the machine and turn off the water.
  2. Check the permeability of the hose and the fluid pressure in the main line system.
  3. Check for blockages.
  4. Clean the filter if it is clogged.
  5. They start the machine.

Also, situations with water are not always associated with malfunctioning machine elements. Sometimes, the human factor plays here. Those. the owner simply forgot to close the machine door tightly, or laundry got caught between the machine itself and the door.

Another reason could be unsuitable powder (too much foam).

The following will describe the most common Atlant errors.

Error F4

This code appears in two cases: if the wash is almost finished and the machine cannot drain the water. Or the liquid drains very slowly.

There may be several problems in this situation. This is a malfunction of the unit or simply a system failure. As well as a clogged hose or sewer.

As a rule, you can eliminate such a nuisance yourself. To do this, you need to start by restarting the machine. And if this method does not help, clean the hose and manually drain the water into the sink or toilet.

Error F9

The code appears if the unit button is stuck. In this case, simply restart the system.

But, if the tachogenerator is faulty, then you cannot do without professional repairs.

To understand the reason why the machine stops, you need to press the “Spin” button; if it doesn’t stop, then the problem is in the engine.

Error F3

In a situation where it was noticed that the laundry was left dirty. But this cannot be, because the washing temperature was above 40 C. It is worth assuming a malfunction of the heating element or water sensor. The machine will immediately show F3. It’s impossible to fix anything on your own, so calling a specialist would be the best solution.

But, if scale has formed on the heating element, then you can “drive” the machine with special means. There is one “but” here. You can't find out until you look at it.

You can get the part yourself if you have good machine repair skills or follow the instructions. If you are unsure of your abilities, then you should wait for the master. And so, based on practice, the heating element is replaced with a new one, and the machine continues to work.

Error F5

The cipher flashing is due to many reasons. First of all, with the simplest one - turning off the central water supply or low water pressure. The mesh located in the water supply system of the machine may also become clogged. It needs to be cleaned and the device will stop showing F5.

For more serious defects, such as a broken intake valve or coil, you cannot do without the experienced advice of a specialist.

Error F8

Overfilling of the tank with water, increased pressure in the sewer system, leakage of the tank and malfunction of the pressure sensor - these are all the reasons why the machine displays F8.

But before fixing the problem, you need to understand its cause.

If you adjust the hose (in case of incorrect connection) according to the water supply level, the equipment still gives a signal. You can no longer do without a service center.

Checking parts

It is possible to determine that the heating element has failed when a program with a high water temperature is running. Some time after starting the algorithm, when the liquid has entered the tank and the washing process has begun, you need to touch the glass of the hatch with your hand. It should be warm. If it is cold, the water does not heat up. It is quite possible that the heating element burned out. It is also worth paying attention to this element if the SMA is receiving an electric shock. Usually, if there is a problem with the heater, the laundry does not wash well and acquires an unpleasant odor.

Failure of the heating element is not necessarily caused by lime deposits. This could be a manufacturing defect. But this is a much rarer occurrence. Poor assembly or a defective part usually appears in the first months of operation of the unit.

Troubleshooting yourself

The instructions for Atlant are a lifesaver when any code appears on the display. Therefore, before calling a specialist, it is worth studying this information.

After all, you can clean the filter yourself, just like bending the hose or directing it opposite the water supply. You can also restart the automatic unit system with your own hands.

What can you say about breakdowns of the engine, water sensor, tachometer, heater and other elements of the machine that can only be replaced with the help of a specialist.

What to do?

If error f5 appears on the display on the Atlant washing machine, what should I do? First you need to disconnect the device from the power supply. Only after de-energizing the unit can you begin any repair work on the electrical device. An inexperienced user, encountering a breakdown of the washing unit for the first time, can begin the inspection with the drain hose. A common cause of error code F5 is the simple clogging of the drain tube with small objects that the owner forgets to remove from her clothing pockets.

The next mandatory step is to clean the filter, which is located at the bottom of the unit. There is a special hatch on the front of the panel that needs to be unscrewed and the filter tube removed. After pouring out the water and clearing the blockages, you need to put the tube in its place and close the hatch. If these actions do not produce the desired results, more serious action should be taken.

What errors can only be fixed at a service center?

Troubleshooting through a service company can be carried out without additional payment by the owner of the equipment if it is under warranty. In other cases, you will have to pay for both repairs and delivery of the machine to the desired address.

Again, you need to clarify that the warranty is valid if the failure was caused mechanically.

In other cases such as:

  • difficulty starting the machine;
  • strange noise when washing and squeezing;
  • when water does not enter the unit;
  • if the door does not open after finishing the wash.

All of the above situations can be examined at the service center.

Like any other typewriter, they periodically stop working. This does not mean that the device is completely faulty; most often it can be repaired, especially if it was purchased recently. And so that repair work is not delayed, the automatic system will remind the owner of the malfunction using code symbols.

Rating
( 2 ratings, average 4.5 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]