10 ways to decorate your phone case

Reading time: 5 min.

no comments

Cases for modern smartphones are not cheap items. And the more intricate the decor, the greater the financial costs associated with purchasing such an accessory. But human creative thought has gone so far that many ways have been invented to create the desired decor on an ordinary silicone case for a gadget, having a minimal set of materials and tools at hand, spending a small amount of time and applying a minimum of effort. DIY painting of phone accessories has turned into another form of modern art that anyone can master. A selection of the best master classes for experienced decorators and beginners is presented below.

How to decorate a case with washi tape. Option 1: geometric shapes.

Using this Japanese colored tape (found in office supplies), you can decorate almost anything.

You will need:

- clear case

- washi tape

- stationery knife

- surface for cutting (board or special mat).

1. Prepare several types of washi tape.

2. Start cutting pieces of colored tape and carefully sticking them to the outside of the case, varying the colors as you like.

3. Use a utility knife to carefully cut a hole for the camera.

Decor of objects Crafts product Painting Masters need your advice Paint

Good day to all, Masters and Craftswomen!

I want to hear your advice, criticism and further parting words)

I have accumulated quite a lot of phone cases, I want something new, but I’m too scared to buy new ones. So I decided to apply a little creativity to them, but I lack experience and brainpower.

The question is: how to cover the covers after painting? I tried several varnishes (including aerosol) but in the end they all stick or fly off and do not hold the design.

I use acrylic paints for painting. I dry all layers well. Tell me how best to complete your crafts! After all, I really want to walk around with my beauty)

I apologize in advance for the quality of the photo)

try using acrylic varnishes from a hardware store. for baths and saunas they are good on wooden and plastic surfaces, but each layer must be dried for at least a day, and for everyday use, it is better to leave it for three or four days. Yacht varnish is also very strong and wear-resistant, but also takes a very long time to dry, and is suitable for all surfaces except silicone. I used these varnishes myself in my works, and I can answer for them! If you're interested, I can send you photos of the companies I use. I really like the spray varnish from Krylon! does not turn yellow, lasts a long time, dries quickly, the item can be used (if it does not have 5 layers of varnish) within a day!

Did you use acrylic varnishes? One leatherette cover I had with acrylic reacted, it dissolved on it

Since the surface of the covers is dark and the colors of the outlines are bright, you can try alkyd varnish, it is more durable. But I don’t know how he reacts to leatherette. Or splurge on glassy varnish.

How to decorate a case with your own hands: use acrylic paint

You will need:

- acrylic paint

- brush

- masking tape

- clear case

— cotton swab (if necessary).

1. Apply a piece of masking tape to the inside of the clear case - it will divide the case into 2 parts.

You can cut out the shape of the cover from white paper, insert it inside the cover and then paint it. You can use a utility knife to cut a hole for the camera and flash.

2. Using acrylic paint, paint one color on the top and another color on the bottom - only paint the inside of the case, NOT the outside.

3. When the paint is dry, apply another coat.

* To keep everything neat, check the edges of the cover and, if necessary, clean them of paint using a cotton swab.

4. When the second coat of paint is dry, remove the masking tape and you're done!

Nail polish

For young girls who love glamorous things, it will not be difficult to design a case for their own smartphone using nail polish. The set of required tools and materials needed for dot painting of a mobile phone case is in this case narrower than in the previous one, and you will have to spend an order of magnitude less time.

So, for work you will need:

Decorative nail polish in several shades.
Transparent silicone case.

Cover the outside of the accessory with multi-colored dots of varnish in the sequence as your imagination dictates. Let the decor dry and you can use the cover.

Another variation of this decoration is the so-called “confetti” motif. It is necessary to visually divide the surface of the cover diagonally into two parts. In the lower zone, do some spot painting on the phone case using the same nail polishes in different colors.

Just place the dots not with brushes, but with toothpicks so that they are miniature. You can make them the same size, or you can make them different - it all depends on your individual preferences. Let the varnish dry and use the accessory as intended.

How to decorate a phone case with your own hands: paper with patterns

You will need:

- clear case

- colored paper

- glue

- brush

- stationery knife

- a surface on which you can cut (a board or a special mat).

1. Download a template for your phone and print it on colored paper.

2. Using a utility knife, cut out the template.

* You can draw a template for your case and cut it out yourself.

3. Print out the pictures and patterns and glue them to the template.

* You can simply draw any patterns or make a drawing on the template, you don’t have to print it.

4. Insert the pattern with the pattern into the case and put the case on the phone.

Polishing

Model made of PLA plastic, polished. Photo rigid.ink

Tools

Plastic polishing compound
Sandpaper on P2000
Cleaning cloth
Toothbrush
Polishing pad or microfiber cloth

Finishing	★ ★ ★ ★ ★
Tolerances	★ ★ ★ ☆ ☆
Speed	★ ★ ☆ ☆ ☆
Suitable for	all FDM thermoplastics

Process

Once the part has been cleaned, a plastic polish can be applied to give a standard ABS or PLA object a mirror finish. After the part has been sanded with 2000 grit sandpaper, you need to remove dust from the printout with a cloth and rinse the printout under warm water using a toothbrush. Once the object is completely dry, buff it with a buffing wheel or microfiber cloth, adding a polishing compound such as that used to polish costume jewelry as you go. They are designed specifically for plastic and synthetics and provide a lasting shine. Other plastic polishes, such as those used to polish car headlights, also work well, but some contain chemicals that can damage the printout.

Professional tricks

To polish fine parts, attach a buffing wheel to your Dremel (or other rotary tool such as a power drill). For larger and more durable parts, you can use a grinding machine, just make sure that the part does not remain in one place for too long, otherwise the plastic may melt from friction.

pros

The part is polished without solvents, which could warp it or change its tolerances.
If sanding and polishing are done correctly, the result is a mirror-smooth surface, very similar to cast.
Polishing and deburring plastic is extremely economical, making this method of achieving a high-quality finish very cost-effective.

Minuses

If you want to achieve a mirror-smooth surface, the part must be thoroughly cleaned before polishing, which can affect the tolerances.
After polishing, the primer or paint no longer sticks.

How to decorate a silicone case with watercolors

You will need:

- clear case

- watercolor paper

- watercolor paints

- brush

— waterproof handle (if necessary).

1. If you wish, you can print the cover template on watercolor paper.

2. Use a waterproof pen to draw the image onto the template.

3. Use watercolor paints to color the drawing and let the paints dry.

4. Cut out the template and insert it into the transparent case. Put a case on your phone.

Painting a silicone bumper (detailed instructions)

Anyone who has a glamorous, bright silicone bumper for their phone eventually faces the problem of soiling it, which can no longer be eliminated by any cleaning products.

2. Information on the Internet about painting silicone is extremely scarce, and all advice boils down to one thing - buy a new one.

3. Buying a new bumper is not our method; a decision was made to reincarnate it in a different color.

4. For this we need. hair dye (black). I took the cheapest one for 50 rubles.

You can buy such a case on Ali for about the same money.

5. Dump out the contents of the box with instructions. We leave the necessary bags (we won’t need the balm after coloring, though.)

6. Prepare a packaging bag - one piece.

7. Don't forget about personal protective equipment.

8. Squeeze out the cracking paste and mix by squeezing the bag.

9. Place the bumper in the bag.

10. Mix and wrap.

11. After some time, a reaction occurs, the bag turns black and warms up a little. I let it sit for about two hours (to be sure), stirring periodically for a more uniform coloring of small parts and holes.

12. We extract the test subject.

13. Rinse in running water. When all the nasty stuff is washed off, wash it again with soap.

14. Wipe and enjoy the result.

15. Issue price - 50 rubles. The advantages of the method are that the silicone is impregnated, it can be washed, scratched, and wrinkled; the paint does not fall off or fade. Disadvantages - not noticed yet. Z.Y. Using the same method, I painted bright (but already darkened) straps on children’s watches. All the best!

Source

How to make a beautiful case from beads and pearls

You will need:

- beads, pearls and other jewelry

- glue

- a simple case.

1. Think about what kind of bead pattern you want to depict on the case.

2. Using glue, start gluing the decorations on as you planned to create a nice and neat design.

Another version of the case, decorated with more formal rhinestones or pearls

You can use colorful neon decorations

Such decorations can be found in office supplies, and, as a rule, they already come with an adhesive surface. But if you find simple ones, then you can buy Moment glue or any other superglue.

Recommendations from the experts

To make the painting of cell phone cases perfect and pleasing to the eye of both the owner of a unique accessory and the people around him, listen to the recommendations of experienced craftsmen and try to put them into practice.

First, to avoid shaking your hand, which causes uneven lines, position it so that it is completely relaxed. Try to place your elbow on the surface of the desktop.
Secondly, never start applying a second coat or tracing the outline of a design until the previous paint has dried. Otherwise, the work may be washed out and the cover will simply be damaged.
Thirdly, no matter how simple the decor you create, if you are working on the inner surface of the accessory, do not be lazy to turn it back towards you to see how the image looks from the outside. While the paints have not dried, any blots can be corrected using acetone.
Fourthly, if you create a composition with acrylic paints on the outside of the case, do not forget to coat the work with a special varnish to fix it.

Be inspired by creative ideas, develop your own design motifs and feel free to start bringing them to life!

0 Comments

Delicate pastel

Another trend this year is pastel shades. They are great for decorating a transparent case in different styles.

For decoration you will need:

clear case;
acrylic paints in pastel colors;
scotch;
cotton swab;
brush.

We glue the tape to the case in the place where there will be empty space. On the inside of the case, apply one shade above the tape, and the second below it.

We remove paint residues in unnecessary places.

Leave the cover until completely dry, then remove the strip of tape.

To create the next design option in pastel colors, we will prepare:

case;
nail polishes.

Alternately place dots of different shades on the cover. You can do this in a chaotic sequence or stick to some kind of pattern.

Leather mobile phone case

This type of cover is popular among the male population. It looks stylish and brutal. Even working with leather is easier for men. After all, you will need to pierce the holes with an awl or a hole punch for leather products.

You will need leather, a hole punch, and threads.

You will need to trace the outline of the phone on the skin;
You need to cut 1 cm more;
You need to make 2 parts;
On one of them it is worth cutting out a circle for the camera;
now is the time to pierce the holes for the firmware;
You will need to sew the parts on 3 sides with thread.

The case is ready.

Painting a silicone transparent phone case step by step

A transparent bumper for a smartphone quickly gets dirty and becomes ugly. The stains can no longer be washed or cleaned. How can you paint a silicone case with your own hands? How to paint and decorate mono? These questions periodically arise before everyone. With a minimum amount of time, you can update the product by changing its shade.

Painting phone cases has become a form of modern art. Let's look at how this process works.

What you will need

If you only want to change the color and not make any decorations, then you need to take:

Surface preparation

Before starting work, make sure that the surface of the phone case is clean. There is no dust or traces of dirt on it. To clean, use an alcohol solution and cotton pads. You can use nail polish remover. Just check first on the inside of the case to see if the acetone will corrode the surface.

Carefully wipe the case on all sides so that no mechanical particles remain. If you do not clean it, the result of the work will be unsatisfactory and will not bring joy to the owner.

Coloring

Let's first look at a simple paint job on a clear silicone fixture.

You now have a new accessory. Depending on the color of the paint, the case may turn out to be black, brown, golden, pink, or blue. It all depends on what kind of paint you bought.

Now you don't have to throw away your old worn out case. Using a hair dyeing composition, a new unusual design is obtained.

Decoration

In addition to painting, you can decorate your device in other ways. For this you will need:

Work order

Let's consider the simplest option.

The simplest decor option is ready!

Shutdown

After finishing the work, let the cover dry thoroughly. Otherwise, all the work will go down the drain. And, instead of a new design, you will receive a damaged product.

Gradient design

To give a simple silicone case a gradient design, you only need colored paints and a brush.

It's best to start with the lightest shade. After it dries, apply another color, starting from the middle. Leave until completely dry and add a third color along the bottom edge.

Bright cases for your smartphone are ready!

Popular colors for cases

Abstract patterns, mixing the brightest colors and wooden or even metal products are all in trend for the second year. Nowadays, bamboo covers have also become increasingly common, which are not even decorated with additional elements. You can also make a similar accessory, but use cardboard, a transparent case, or even more exotic options as the base.

Accessories should not only have trendy colors, but also match the image being created. Select covers to match the image you create, focusing on following the basic rules of style.

From a plastic bottle

You can create a transparent bumper yourself. You need a bottle and glue.

The plastic bottle is crushed;
the outline of the phone is cut out;

the part is placed on a gadget protected by paper;

The edges need to be passed with a glue gun.

The unique model is ready. On the left it remains transparent, and on the right it is varnished. You can even make a gift for your family for any occasion.

Case with dried flowers

You will need the following materials:

case;
dried flowers and leaves;
epoxy resin;
acetone;
glue;
wooden stick;
glitter;
cotton swab;
parchment paper;
scissors.

Before we get started, let's think about the design of the case. To do this, we lay out the elements on the surface and try different combinations.

Let's start decorating. Apply a little glue to the largest dried flower and attach it to the case. We repeat the same with the rest of the details, and also complement the decor with sparkles.

Leave the composition until dry. At this time, prepare the resin according to the instructions on the package. To do this, mix it with water in equal proportions. Pour the solution into the center of the cover and distribute it over the entire surface.

Leave the cover until dry. If during the process the solution flows down the edges, remove it with acetone and a cotton swab.

After drying, you will receive a wonderful case that will delight you and those around you.

Interesting ideas for decorating a case

We have selected several ideas that can be brought to life by repeating the steps from the master classes above. Anyone can make a phone case or decorate it stylishly. This does not require too expensive materials, just a little imagination and practice is enough.

Painting the gadget body

In specialty art stores you can find permanent spot painting paint that can be used to decorate your phone. The composition is sold in small tubes and is very convenient to work with.

Note!

How to properly make a birdhouse with your own hands from scrap materials: we create an original birdhouse according to sketches
How to make candles with your own hands: instructions for making wax, gel, scented, homemade decorative candles with a wick
What you can make from foamiran with your own hands: we create flowers, Christmas tree decorations, snowflakes, three-dimensional paintings (photo + video)

How can you decorate your phone with your own hands? Apply a pattern or ornament to the body, and then squeeze drops of paint onto the sketch.

When the work is completed, all the droplets will merge into a single image. To ensure reliable decoration, coat the device body with colorless varnish.

Rhinestones and PVA

A case decorated with rhinestones will look stylish and glamorous. In order to decorate an accessory in this way, you will need rhinestones of any color, as well as PVA glue (rubber or superglue will also work).

The working process is as follows: a drop of glue is applied to each rhinestone, after which it is fixed on the front side of the case. You need to start gluing rhinestones from any of the edges, moving in a diagonal direction until the entire surface of the accessory is covered with them.

To best fill the surface of the case, use rhinestones of different sizes, sticking the largest ones first, and then closing the gaps between them with smaller ones.

You can also play with combinations of shapes and sizes of rhinestones, for example, alternating round and square and contrasting colors.

A riot of colors

Necessary materials:

case;
colored tape;
scissors;
knife.

We glue the tape to the case one by one, alternating shades.

Using a knife, cut a hole for the camera.

A bright case for summer is ready!

Interesting coloring and decorating ideas

Let's consider several options for painting and decorating the accessory.

Nail polish

Girls can be asked to decorate the case with nail polish.

In this case you will need:

Silicone Case.
Nail enamel.
Wooden toothpicks.

We take the varnish and paint the outer surface of the accessory depending on your fantasies. You can make droplets in the form of rain. To do this, carefully apply the varnish with a toothpick. You can lightly shake the brush, and you will get a beautiful scattering of drops.

Important: do not forget to let the accessory dry at the end of the work! Otherwise, all your work will be smudged and lose its beautiful appearance.

Neon stickers

You can buy it at office supply stores and decorate your gadget.

Rhinestones

You will need:

PVA glue;
rhinestones.

Carefully apply glue from the reverse side to the rhinestones and glue it to the case. We start work from one edge, gradually moving towards the center. We try to glue large rhinestones first. Then we attach small ones to the formed “bald spots”. Give the solution time to dry.

Stickers

You can decorate with colorful stickers, which are sold in kiosks and bookstores. You will have flowers, stars, fish.

Whatever your heart desires! The selection of stickers is huge!

Beads and pearls

This is suitable for advanced users who have skills in working with small parts. Pearls and beads are carefully glued to the body. The work is delicate and jewellery. Suitable for professionals.

Holographic tape

Stick ribbons on the cover. Cut strips as many as you like and attach them at different angles. Budget and original.