How can you thicken slime: list of thickeners, activators

Making slime is a fascinating hobby that is loved not only by children, but also by adults. In this regard, many novice creators will be interested in knowing how to thicken the slime if it turns out runny during the production process. The means at hand, which can be found in every home, will help correct the situation.

Thickeners for slime list

In fact, a wide variety of cosmetics and household products, pharmaceutical preparations and food products are suitable for this.

The list of the most popular includes:

sodium tetraborate;
laundry or dishwashing gel;
salicylic acid;
Teymurov spray/paste;
Visin eye drops;
Polish for hair;
air freshener;
liquid for contact lenses;
starch;
salt;
sugar;
gelatin;
soda.

The recommended type of thickener is usually indicated in the slime recipe. If the prescribed component is not at hand, you can select an analogue from the list. In order for a replacement activator to perform its intended function, it is important to know its properties. We will analyze them in our article.

What supplements should I use for beauty?

You can diversify the appearance of slime using various additives. The additives usually include:

various dyes;
foam balls;
glitter;
beads;
foil.

Gouache

Gouache should be used if there is a need to give the slime a matte finish . It must be remembered that gouache contains white, so over time the color will begin to fade. In order to give the toy the required shade, just one or two grams of gouache is enough, that is, on the tip of a knife or teaspoon.

Watercolor paints

The paints are more watery and not dense, like gouache. Therefore, you need to add them to slime in larger quantities - on average 2 or 3 times more than gouaches.

Egg dyes

The paint used to color Easter eggs is also suitable for coloring slime with the required pigment. This paint is available in the form of powder and solution. If you use a solution, just a few drops are enough. The powder should be used in an amount of one or two grams.

Glitter

Glitter or sparkles are small particles of foil , often they are simply round, but if desired, you can also find other shapes - stars, diamonds. You can find them in specialized stores. They are used mainly in printing, as well as for creating holiday manicure and makeup.

Cut foil

Regular baking foil can also be an excellent addition to slime and make it more beautiful. To do this, you just need to cut the foil into small pieces, add it to the mass and mix thoroughly. If you add such foil to transparent slime, then during the game it will shimmer with bright light and cast glare.

Beads

Multi-colored beads are another way to diversify your slime and make it more beautiful. In this case, it is best to use small beads. They look especially impressive if the slime is transparent.

Foam balls

Using foam balls you can not only diversify the appearance of the slime, but also its texture. Multi-colored balls can be matched to the color of the slime itself or choose some other color. They are sold in specialized stores for children's creativity and are already packaged in small bags - 10-20 grams or bottles - 100-200 milligrams. When playing with such a slime, it will make an unusual crunch.

Pearlescent powder and silver

In order to decorate the slime and make it original and iridescent, you can add pearlescent powder or silver. It is enough to pour one or two teaspoons of mother-of-pearl or silver mass into the already prepared mass, and then mix it all thoroughly.

Boric acid as a slime thickener

The basic composition of borax includes boric acid salts. They have a thickening effect on mucus, providing it with the desired consistency and elasticity. Taking this into account, not only tetraborate, but also other salt-containing products can be used as an activator. They help give shape and density to slimes.

From the point of view of elementary chemistry, they refer to active components that act as a catalyst in the process of a chemical reaction. The activator is added after mixing all the components. The amount depends on the desired density of the slime and its size.

It is important to know:

Suitable thickeners instead of boric acid include: Visin eye drops, contact lens liquid, or table salt solution.
Borax powder may cause allergic reactions. You should wear gloves when working with it. Before using the drug, it must be dissolved in water in the proportion of 1 tablespoon of powder to 1 glass of water.

Substances for activating slime

Components can be used to replace the slime thickener. They modify the structure of the slime, which becomes more elastic, resembling chewing gum. It is possible to use other types of thickeners. Their type depends on the components in the base of the slime.

Borax powder

The first slime activator that deserves attention is borax in powder form. One of its components is sodium tetraborate or borax. Each of them is quite harmful, however, in the storm they are present in a minimal ratio.

The advantage of this slime thickener is its release form. It is a powder with small, easily absorbed granules. It can be used equally successfully for various slime bases, including flour, liquid soap and other ingredients.

Saline solution

Another slime activator that is sold in pharmacies or large retail chains. Properties of this thickening component:

helps to obtain elastic slime from any slime base;
it is often taken in the form of a liquid for storing contact lenses;
The composition contains borates - usually boric acid or sodium tetraborate.

Expert opinion
Irina Nikolaevna

Specialist in licks and slimes.

How to make slime thick with it? Elementary! Add the saline solution after mixing the main components and knead the mass thoroughly. This thickener will be enough to obtain an elastic and well-stretched slime.

Liquid starch

To thicken the slime, you can use starch yourself. It is desirable that it be in liquid form. It contains sodium tetraborate, common to all detergents. You can buy this type of thickener for slime in the departments of household chemicals.

An important condition that must be taken into account when using liquid starch is the total amount of ingredients. To obtain a slime of good quality and durability, there must be at least 3 of them. These can be dry and more watery components.

Expert opinion

Svetlana

Slime expert

If the slime does not turn out after the first kneading, we recommend that you add a small amount of starch at the last stage. Wear rubber gloves.

Eye drops or eye wash

To make slime without sodium tetraborate, you can use this solution. The main ingredient that allows it to be introduced as an activator is boric acid.

Eye drops or eye wash can be added to any mixture. This component provides rapid thickening and obtains the desired degree of elasticity. 2-3 drops are enough for the slime to obtain the desired consistency and become thicker.

Sprays

Is it possible to thicken a toy this way? Yes, this product can be used as a thickener. We are talking about Teymurov’s foot spray, the list of components of which contains boric acid.

Such slime activators are introduced in the middle of preparing the slime exactly when you need to mix all the ingredients with your own hands:

the spray is administered in small doses;
after each of them, the mass for the future slime is thoroughly mixed;
this will allow you to control the structure of the slime and the introduction of the next portion of the thickener.

7 sprays of foot spray may be enough to make the toy look like rubber, suitable for stretching and kneading. This method of making slime at home has one caveat - the specific smell of the composition. Children may not like it.

Soda

How to make an activator? Elementary! Just add baking soda. It is also introduced in the middle of the process while mixing all the ingredients.

This is one of the safest thickener options. Slime cannot be consumed, however, its preparation does not involve the risk of allergies or skin inflammation. As a result, you will get an elastic slime that is suitable for games for adults and children.

Gelatin

Another safe answer to the question of how to thicken slime. The advantage of gelatin is that with its use it will be possible to prepare a slime from just any 2 components.

In addition to gelatin, you can add plasticine to the slime for sculpting figures. Add the gelatin composition to the special plasticine in an elastic form. To do this, the granules will need to be filled with warm water and left for 45 minutes.

Thickener for slime at home: gel for washing and washing

Do you want to know how you can thicken slime if you don’t have tetraborate or don’t want to use it? Use Fairy dishwashing gel or Persil washing gel as a thickener.

Recipe 1 . Mix a package of PVA glue (125 ml) and a teaspoon of Fairy detergent. Mix well. The mass quickly takes shape and is easily kneaded with your hands. The result is an original mother-of-pearl slime.
Recipe 2 . Mix a bottle of PVA glue with 2 capsules of washing gel. To ensure the mixture is homogeneous, knead it thoroughly with your hands or use a blender. After this, leave the slime to rest for 30 minutes. After half an hour it will be ready for use.

This recipe is not suitable for people prone to allergic skin reactions.

Rules for choosing ingredients

Flavorings are divided into two types:

cosmetic;
food.

In the first case, it is customary to call the substance a fragrance. They contain components of synthetic origin. There are also flavors used for automotive products and household chemicals. Their composition is more aggressive.

Flavors of this type are not recommended for creating slime. Allergic reactions may occur upon contact with skin. If the human body does not tolerate the substance, the skin may itch, turn red and develop a rash. Even if a person is allergic to just one component in the composition, it is still not suitable

The question becomes especially important if the toy is being prepared for a child.

It is better to use cosmetic fragrances. There are a huge number of products on the market that you can buy and prepare your own fragrance. Thus, the slime acquires any smell.

Food flavorings

They are in first place on the list due to the safety of use. Aromatic substances are presented in liquid, gel and dry form. It is recommended to choose the liquid form.

According to the information, they use the following rules for choosing components to create flavors:

First of all, pay attention to the origin of the substance. It is better if it is as close to natural as possible. Components to which you are allergic are completely excluded. Form of ingredients

As a result, the flavor should be obtained in the form of a liquid.

The choice of ingredients is of great importance. Neglecting these rules will lead to negative consequences after playing with slimes

Therefore, the choice of ingredients is approached with great responsibility.

How to thicken slime using air freshener

Instead of boric acid, you can use aerosol air freshener or hairspray when making slimes.

The recipe is elementary. Pour a tube of office glue or PVA into a dry container. Spray the adhesive mixture with varnish or freshener. Do not spray the entire bottle at once. Spraying should be portioned and with mandatory mixing of the mass.

As a result of the work, an elastic lump will form. In order for it to gain elasticity and stretch well, you need to give the slime 20-30 minutes to rest.

It is important to know:

Not all air fresheners are suitable for making slime. Recommended ones include AirWick.
When choosing a varnish, give preference to a product with high hold.
Varnish and freshener are interchangeable components, not companions in one recipe.
You should work with aerosol products in a well-ventilated area.
A soda solution will help you achieve consistency from a too liquid mass.

How to thicken slime at home - baking soda

Instead of an activator, you can include baking soda in the slime. It promotes progressive thickening of mucus and, in addition, it is much easier to find at home than sodium tetraborate.

Production technology:

Pour a glass of warm water into a deep container and pour 2 tablespoons of soda into it;
Add office glue to the solution, but do not stir, but carefully collect it, pulling it with a spatula from the edges to the center;
It will take time and diligence for the glue to be saturated with the solution and take an elastic shape, but you will like the result;
Once the mass becomes dense, you can begin kneading by hand.

The thickness of the slime depends on the type of glue used. If the slime turns out to be runny, you can add a few drops of boric acid to it.

Tips and tricks

One of the main components of slime is sodium tetraborate. The substance acts as a thickener. Sodium tetraborate is usually added at the end of the work.

It’s easy to make your own slime using sodium tetraborate:

255 ml of hot water is poured into a container and 2.5 g of borax is dissolved in it;
55 ml of hot water is poured into another container, in which 32 g of PVA glue with the thickest consistency is dissolved;
dye is added to the adhesive solution;
pour in the solution with the thickener and stir with a stick;
When the lump stops sticking to the walls of the bowl, take it in your hands and actively knead it.

To prevent the toy from deteriorating and retain all its properties for a long time, simple tips will help:

A thickener should be added to the mixture periodically. To make the composition softer, 2-3 drops are enough

After this, the slime is kneaded in your hands for 4 minutes. When purchasing, you need to pay special attention to the production time of the product and storage conditions in the store. You need to play with slime in moderation. You can't hold the slime in your hands for too long without a container. If the slime has become too watery, a few grains of salt will help.

Add grains of salt to the container where the slime is stored, cover with a lid and shake. Salt absorbs excess moisture and returns the slime to its original structure. The mass may harden. The cause is too intense, long play or overfeeding. Add a few drops of water to the mixture and leave it alone for three hours. Adding a thickener will help remove excess stickiness. After which the slime is placed in the refrigerator for 5-6 hours.

All these methods restore not only the structure, but also increase the size of the slime.

Share link:

Gelatin for slime production

To get not a classic slime, but a trembling mass, gelatin is used. The toy will not have the usual plasticity. You won't be able to stretch it or mold it into something. It is more suitable for water procedures. These moydodyr slimes are made from gelatin and shampoo or shower gel.

Mix gelatin solution with cosmetic product. Stir well, pour into shaped molds and refrigerate for an hour and a half. After this, you can take the collagen-containing slime with you into the bath and wash.

Top 3 slime recipes

Slime without PVA glue with sodium tetraborate

By following the recipe exactly, you can get a beautiful, high-quality toy with a pleasant texture. This slime stretches well and makes a crunch when pressed.

You will need:

shower gel – 6-7 dispenser pumps
toothpaste – 1 tsp.
water – 2 tsp.
sodium tetraborate
glitter, dye - for decoration.

Additionally: a container with a tight-fitting lid (plastic or glass container), a deep plate, a spoon/stick for stirring.

Preparation procedure:

Pour 1 tsp into a container. water. Add shower gel and any toothpaste.
Close the lid and shake the contents of the container well for about 10 minutes.
Transfer the resulting foam to a plate, add glitter if desired and color the mixture. Stir thoroughly.
Add a few drops of sodium tetraborate (thickener). Knead to the desired consistency, up to 20-30 minutes.

The easiest slime recipe for beginners

Thickeners for slime, the list of which is listed above, make it possible to make slime using what is at hand, without purchasing additional special components. The first slime you ever make yourself can pleasantly surprise your child. The recipe ingredients are simple, accessible and inexpensive, and the result should be amazing.

You will need:

Water – 2 tsp.
shampoo or dishwashing gel – 1 tsp.
Hand cream – 0.5 tsp.
PVA glue – 5 tsp.
Soda – 0.5 tsp.
Naphthyzin drops
Acrylic paints or gouache

Additionally: deep container, spoon/stick for stirring.

Preparation procedure:

In a deep bowl, mix water and shampoo, beat until foam appears.
Add cream, mix. It is not necessary to achieve uniformity.
Pour in water and glue, stir well so that the glue is evenly distributed throughout the mass.
If desired, tint the future slime with a couple of drops of paint of the desired color.
Add a few drops of Naphthyzin and stir until the mixture begins to pull away from the edges of the container.
As soon as the slime acquires density and becomes elastic, the toy is ready.

The resulting slime stretches well, kneads with your hands, and you can make “bubbles” from it. Stored for up to 10 days.

Super slime made from glue and toothpaste

A very large, very crispy, airy, loudly clicking slime that stretches into a film. There are quite a few ingredients in the recipe, but they are all necessary. It is not recommended to replace them or remove any one.

You will need:

Silicate glue – 200 ml.
Dye (gouache or special food coloring)
Toothpaste – 0.5 tsp.
Shaving gel – 20 gr.
Sodium tetraborate – 2-3 drops.

Additionally: large deep container, stirring spatula.

Preparation procedure:

Pour glue into the container, give it the desired color by adding dye available at home.
Add toothpaste and stir thoroughly until completely dissolved. The mass should lighten.
Pour in the shaving gel, beat the mixture well until fluffy.
Add sodium tetraborate. Stir with a spatula.
When the slime begins to thicken and it becomes difficult to stir with a spatula, continue kneading the mass with your hands until the desired thickness.

How can you thicken slime without tetraborate?

How can you thicken slime without sodium tetraborate? The answer is sugar. This product is present in every home. Suitable for making slimes, but with the only caveat - they melt when exposed to heat. You won't be able to play with them for a long time.

The technology for producing “sugar” slimes is as follows: mix 2 tablespoons of shampoo or shower gel with 1 teaspoon of granulated sugar. Mix the mixture thoroughly until smooth. To make the task easier, you can take powdered sugar.

Place the finished mixture in the refrigerator for 1-2 hours. After they expire, the slime is ready. At first it will be elastic and pliable, but as soon as it warms up well in your hands, it will begin to spread.

Master confectioners create original slimes using powdered sugar. They are used to decorate cakes and other desserts. You too can try yourself as a confectioner.

Marshmallow heated in the microwave is perfect for making sweet slimes. Add powdered sugar to it and start kneading. The mass turns out to be very plastic and pliable. They are convenient for making small slimes.

To make figures for the cake, you should add more powdered sugar and bring the mass to the state of plasticine.

Basic Recipes

Before making a toy, you need to prepare components and materials: a container in which the components will be mixed, a stirring stick, rubber gloves and a container for further storage of the slime. The ingredients are combined in a bowl and kneaded until the final elastic state. The basic recipe can be varied by adding bright food colors or glitter to the slime, so it will be even more interesting for the child to play.

Rainbow

To make rainbow slime you will need different colors of food coloring. In several bowls, separate for each color, mix the components and bring the mass to the desired consistency. Ready-made slimes of different colors are combined into one, the resulting toy will be multi-colored.

Classic version of glowing slime

To make glowing slime, you need to take:

glue (regular stationery or PVA, homemade glue for slime is also suitable);
activator - sodium tetraborate (you can replace it with lens fluid, borax or borax);
fluorescent marker.

Step-by-step instructions for making glowing slime are presented below:

Prepare a luminous liquid from the core of a felt-tip pen and water.
Glue is added to the resulting solution.
The mixture is supplemented with any activator from the list.
The resulting composition is mixed first with a stick, then as it thickens with hands protected by gloves.

Thicken the slime with starch

The starch slime recipe is very simple.

For it you will need:

starch;
vegetable oil (refined);
shampoo;
food coloring for color (optional)

Mix oil, shampoo and dye until smooth. Add starch to it. The mixture should acquire a dough-like consistency. It is better to knead the slime with your hands. This will allow you to quickly give it the desired shape. For variety, you can replace the shampoo with condensed milk. The result will be, if not a bun, then a completely edible slime.

Effective ways to increase slime

If you still fail to save the slime and it has decreased in volume, effective methods will help.

Soaking and stretching

The following recipe will help you make more slime:

take the damaged slime into your hands, actively knead it and stretch it in different directions for 4 minutes;
105 ml of warm water is poured into the container;
immerse the slime in water and stir with a stick for 35 seconds;
take the lump in your hands again and quickly knead it.

Similar steps are repeated several times until the slime structure becomes soft and elastic.

Envelope with salt

If you give a toy moisture, it will become larger. A series of sequential actions should be performed:

immerse the toy in warm water for 3 minutes;
then a pinch of salt is poured onto the surface of the mass and the envelope is folded;
begin to actively knead the lump.

Salt injections

Injections with salt will help return store-bought or homemade slime to its original size. Take a syringe with a needle and fill it with saline solution.

Preparation of the solution

It's easy to prepare the solution:

102 ml of warm water is poured into the container;
add 4-5 g of salt;
immerse the slime in the prepared solution for 4.5 minutes;
take the lump in your hands and knead it with your fingers;
If the mass sticks to the skin, then sprinkle a little salt on the surface of the slime.

Excess liquid from the surface of the slime is removed with paper napkins.

Injection

The next step is a restorative injection:

22 ml of water is poured into the container;
dissolve 2 salts;
the prepared liquid is drawn into a syringe;
The needle is stuck into the slime and slowly saturated with the solution.

It is recommended to repeat the procedure three times with an interval of three hours. Don't inject too often. Otherwise, the composition will deteriorate and elasticity will be lost.

Using shaving gel

Regular shaving gel and baby powder will help increase slime:

A small amount of powder is poured onto the surface of the slime and the mass is intensively kneaded.
After this, two sprays of shaving gel are applied to the surface. Again stretch the slime in different directions.
After just 4.5 minutes the lump will become large and elastic.

Shaving foam will also help save the toy without using other components. Squeeze a small ball of the product onto the lump, and then begin to actively knead it with your fingers for three minutes. The method will help not only increase the volume, but also make the composition soft and viscous.

How to enlarge using kinetic sand

You can enlarge the lump without using shaving foam. The component can be replaced with kinetic sand. It is sold in the stationery and toy department. The composition differs from ordinary sand in that it has a wetter structure. The method is suitable for enlarging only those slimes that initially had kinetic sand added to them:

Kinetic sand 34 g is added to the mass.
The slime is actively kneaded until a homogeneous mass is obtained.
Add a portion of sand again and knead it.

With this method, the mass grows before our eyes. At the same time, the composition becomes soft and viscous.

Adding plasticine

If the slime is made from plasticine and gelatin, then this method of restoring volume is suitable for it. To work, you will need air plasticine, which is sold in small containers with lids.

The mass of such plasticine is very soft and sticks to your hands:

A small piece of airy plasticine is mixed with slime.
Knead the mass intensively with your fingers so that there are no lumps.

As a result of all these actions, you will get a large elastic lump that stretches well and does not stick to your hands. Instead of plasticine, you can use PVA glue. Suitable for both purchased and homemade slimes:

the mass is placed in a polyethylene bag;
add a little glue and tie the bag;
The slime is kneaded until a homogeneous consistency is formed;
then pick up the lump and continue kneading for another 5 minutes.

Hydrogen peroxide will help thicken the slime.

An excellent remedy for obtaining the desired density and consistency of mucus is a pharmaceutical preparation - hydrogen peroxide. If you mix it with starch, the slime will be soft and pliable, and if you use baking soda instead, it will become elastic.

Mix starch and cold water in a 1:1 ratio or with hot water 1:2. Add PVA and peroxide to the resulting jelly-like mass.
For the second recipe, the proportions remain the same, but peroxide should be replaced with soda.

Homemade slime activator

This component is relevant in the manufacture of colored, transparent and other types of slimes. It always comes to the rescue for those who like to experiment with different slam recipes, especially if the slime stubbornly refuses to thicken and take on a clear shape. You can make an activator at home.

You will need a liter bottle of water and 50 ml of sodium tetraborate. Mix and shake. The solution can be stored in a cool, dark place.

What to do if the slime doesn't work

There are situations when, despite efforts and compliance with the proportions specified in the recipe, the slime does not acquire the desired consistency. Don’t be upset, because the result is influenced not only by compliance with the proportions, but also by:

the quality of materials used in the manufacturing process;
compliance with step-by-step actions;
incorrectly formulated recipe.

A large amount of water can make the toy watery.
In the case when the slime does not turn out homogeneous, it can be saved by vigorous stirring until the product acquires the required level of viscosity.

In a situation where the toy drags like a cobweb behind your hand, it is worth adding a small percentage of liquid starch to the composition. Excessive viscosity can be removed by including boron or flour in the solution.

You can make your own slime thickener at home. There is absolutely no need to purchase expensive products. You can use materials that are found in every home, for example, powder or dishwashing detergent. By experimenting with the ingredients used, you can create the perfect anti-stress toy and delight yourself and your children.

Slime consistency

The slime does not reach the required density for several reasons:

Expired components. Before purchasing and using the ingredients needed to make slime, carefully check their expiration dates. Adding expired slime to the composition will reduce its properties.
Large amount of water. When creating slime, it should be in moderation, otherwise it will simply spread. In addition, excess fluid suppresses the connecting reactions of the components.
Changing the recipe. To get a high-quality toy, you must strictly follow the instructions for its manufacture and use the products specified in the recipe. By replacing them with analogue ones, you may not be able to make the right choice.
Failure to comply with proportions. Most often, an insufficient amount of activator leads to the fact that the slime does not thicken. When correcting the situation, you should add it to the mucus carefully, in small portions.

Video on how to thicken slime: TOP 10 thickeners

It's time to take a closer look at the question of how you can thicken slime. If during the creative process there is a clear miscalculation with one of the components and the slime does not want to hold its shape, spreads or sticks to your hands, it is necessary to correct the defect. There are several ways to thicken mucus. Try each of them:

Almighty glue

In the case where the slime was made on the basis of PVA glue diluted with water, there may be an excess of liquid that inhibits the action of the activator. An additional portion of glue and thorough kneading of the mass will allow you to correct a small defect.

Exposure to cold

Low temperatures contribute to the thickening of slimes made on any basis (plasticine, glue, cosmetics and detergents). That is why, after the last stage of kneading, they must be placed in an airtight container and sent to the refrigerator for an hour and a half.

Mixing

This process must be repeated when introducing each of the slime ingredients. Stirring can be called a mechanical catalyst. It accelerates chemical reactions, forcing components to quickly and correctly interact with each other, leading to the desired result. Mixing is done not only with a spoon or spatula, but also by hand.

We call on the thickener to help

If the above methods do not give the desired result, there is only one way out - using an activator. A few drops are enough. You don't need to add much as the slime can become tough and brittle.

Why doesn't the slime thicken?

3 main reasons:

Not enough activator. If you add all the ingredients and vigorously stir the liquid for several minutes, but the slime does not thicken, then this recipe may need more thickener. Try increasing its quantity.
The glue has expired. Try to use a new tube of glue for slime if the old one has not been used for a long time. The properties of the glue weaken when it is open for a long time. Pay attention to the expiration date. Expired glue can cause slime to become runny and sticky.
Some types of glue are not suitable for handgaming at all. Such glue, as a rule, does not bond well even to paper. If you have done everything according to the recipe, and the tetraborate does not help thicken the mixture, then the problem is most likely in the glue.
Too much water has been added. If most of the mixture is water, the slime will be very runny.

If the slime turns out to be very liquid, you can thicken it in several ways. Try the following steps one by one:

Add glue

If PVA glue was used and water was added to it, the glue solution could turn out to be too liquid and the activator could not work in it. In this case, to thicken the slime, just add more glue and mix the mass properly.

What glue is guaranteed to be suitable for slime.

Place in the refrigerator

In some cases, in order to fully “ripen”, the slime needs to brew. Try closing it and putting it in the cold for half an hour or an hour.

Mix

Vigorous stirring thickens the slime as it causes the reaction to occur faster. Before trying the next remedy, stir the mucus thoroughly again. If you can pick it up, knead it with your fingers.

Add thickener

Last chance to fix a failed handgam. The activator should be added in very small portions, since if it is too much, the slime will turn into a piece of hard mucus.

Different types of thickeners help create slimes with different properties, different surfaces, elasticity, and density. With their help, you can assemble a whole collection of slimes made according to several recipes. All products are available in the store, pharmacy or at home. When creating a toy, you will feel like not only a scientist, but also a designer, decorating and complementing your creations.

Advice for young designers

Having learned from the article how you can thicken slime, you are free to begin your own creativity. The main thing to remember is that each type of thickener presented gives the toy special properties. Some maximize elasticity and softness, others increase elasticity and ductility, and others affect the texture and format of the surface.

Tips on how to easily make transparent slime →

Try to create a whole collection of slimes with your own hands, using simple ingredients available at home, easily available at the pharmacy or in online stores. Be bold, create unique designer slimes.