The range of household appliances differs in functionality, cooling system, compartment capacity, and the presence of additional features. The user manual contains information on how to turn off the freezer in the Atlant refrigerator, taking into account the features of the control system. When performing preventive maintenance, it is recommended to take into account the operating mode of the equipment.
How to defrost a refrigerator with a drip system?
The defrosting itself begins: the ice gradually melts and flows out in droplets through a special hole located at the bottom of the chamber. Further, through the outlet hose, the water enters the drain container located on the outer side of the rear wall of the unit.
Interesting materials:
How to avoid receiving spam in Yandex mail? How not to lose concentration? How did Neanderthals make fire? How to quietly sew up a hole in your jeans at the knee? How to print Excel normally? How to wear a short cardigan? How to wear sneakers for men? How to wear sneakers with or without socks? How to wear pleated skirts? How to wear a cap?
How to turn off the freezer
The control panel in a two-chamber device comes in different types, and this will determine how to turn off the freezer. To turn off a manual freezer, you need to turn the temperature control lever to value 1, and then turn it off completely without much effort.
To turn off a freezer equipped with an electrical panel, press the last button, where there is an image of an open door. Subsequently, the activation indicator of the Atlant freezer goes out, indicating that the compartment has stopped operating. When pressed again, the household appliances department resumes operation after 5 minutes.
Security requirements
It is prohibited to install electrical appliances in the refrigerator compartments. It is not advisable to place hot foods and drinks; they must first be cooled to room temperature. The refrigerator should not be located next to metal pipes, radiators, sinks and other similar household appliances. In addition, you should exercise extreme caution when coming into contact with the back wall of the refrigerator, since it has a high heating temperature, and in this case it is easy to get burned.
Danger of ice
Ice in the freezer is an indicator of a malfunction of the refrigerator or a long lack of proper care. As the snowball grows, the thermal conductivity between the evaporator and the refrigerator compartment decreases, and food freezes worse. You need to turn off the camera and clean it thoroughly.
Ice in the freezer
There is also a high probability of damage to the refrigerator or freezer when trying to remove food frozen in a snow coat. When defrosting the refrigerator, you will have to remove a huge amount of water.
Common mistakes
Turning off the Atlant refrigerator is a simple matter. Hearing a beep, people often become zealous about cleaning the refrigerator.
Refrigerator Atlant
However, there are a number of mistakes that many make:
- using knives and other sharp objects to chip away ice (there was a risk of failure of the refrigerator or cooling system);
- using boiling water (rapid changes in temperature conditions will lead to damage to household appliances);
If you take these common mistakes into account, turn off the Atlant refrigerator and wait until the ice can be removed, everything will go quickly and safely. In some cases, workers installing the refrigerator can turn off the sound of the Atlant refrigerator. In this case, a person should disconnect the device from the power supply and check the lamps to make sure that the equipment is not working.
Defrosting models with the No Frost system
Defrosting of devices with the No Frost system is not required. Ice does not form in them because a tubular electric heater with an evaporator is mounted in the rear wall of the freezer. It automatically turns on every 8 hours and evaporates the ice formed during this time. There is a separate container located on the compressor behind the refrigerator. Melt water flows into it and evaporates there due to the heat generated by the motor.
Despite the absence of ice, for normal operation of such a refrigerator it is necessary to clean its internal surfaces once a year. To do this you need:
- Unplug the refrigerator from the outlet.
- Empty the chambers of food.
- Wait until all the moisture drains down the drain.
- Wipe the inner surface.
An ice crust can build up even inside the No Frost refrigerator due to strong power surges, or if its doors are opened frequently or for a long time. In this case, you should manually clean the device from frost and ice.
For normal subsequent operation of the device, after defrosting is completed, it should be left to dry for at least 24 hours.
Atlant refrigerator with display: designations of modes and faults
The designations are standard - the same ones used on simple versions of electronic control:
- “H” signals a temperature above normal (in the freezer compartment it is duplicated by the “!” symbol).
- “L” - indicates a temperature below the set one. A sign of a malfunction is when the indicators remain on for more than a day.
- “SC” is an additional confirmation of the start of the super cooling mode.
- “SF” is the same, but about freezing.
- Any other symbol (F1-F6, E1, E2) is a sign of a failure that requires calling a mechanic. The designation will tell the technician where to look for the problem.
Defrosting tools
To quickly and painlessly defrost a two-chamber refrigerator from Atlant, you should arm yourself with some necessary items before unplugging it from the power supply:
- capacious bucket or basin;
- fan or hair dryer (they will help speed up the process of defrosting and drying the refrigerator or freezer;
- freezer defrosting agent;
- clean soft rags;
- sponge with a hard layer.
Refrigerator instructions
Once you have everything you need, you can turn off the freezer compartment of the Atlant refrigerator. The beeper will sound, this is a sound signal that notifies that the refrigerator is disconnected from the power supply. Only after this can you start cleaning. The sound may be muted or absent, then you should check by the lights that the device is not working.
Sequencing
In order not to disrupt the operation of the Atlant two-compressor refrigerator, you need to adhere to a certain sequence of actions:
- Disconnect the Atlant two-chamber refrigerator from the power supply (a corresponding beeping sound will appear, which will notify you that the refrigerator is turned off).
- Remove all foods from the freezer and place them in a basin or other chamber.
- Remove the ice tray and all drawers.
Having previously prepared a bucket of hot water and an empty bowl for ice, you can get to work. Carefully remove the ice using a brush with a hard side, and place the pieces of ice in an empty basin.
Defrosting the refrigerator
Having removed all the ice coats, the refrigerator is thoroughly dried, washed and all drawers and shelves are put back in place. Only after this can you install everything in place and turn on the refrigerator. The beeping sound will be heard again, indicating that the Atlant refrigerator is turned on. You need to wait until it gets cold and only then put food in it.
The advantage of two-compressor and two-chamber Atlant refrigerators is the possibility of independent defrosting of the freezer and refrigerator compartment. This is very convenient and saves a lot of time.
Atlant refrigerator with display: instructions for the door control unit
Starting with the XM-4421 model, modifications of the Atlant refrigerator with a display on the door appeared in the Minsk plant’s line. The marking of such devices is distinguished by the designation ND at the end, but you can distinguish the model without looking at the documents: there is a screen on the door of the refrigerator compartment.
The display performs two functions simultaneously:
- Informs about the state of equipment, the temperature in the chambers, and the established operating modes. Later models also show the time. Information is displayed on a digital display and in the form of icons at the bottom.
- Used to set up the refrigerator. All manipulations are performed using four touch buttons.
- Displays an error code in case of failures and malfunctions. Report the device readings when calling a refrigerator repairman.
In addition to convenient and simple setup, the electronic unit is a beautiful, modern detail, a new decoration for the Atlant refrigerator model range.
Placement and installation
Prepare in advance the room in which the Atlant refrigerator will be located. The area of the room must be at least 5 m², and the height must be at least 2.5 m. Correct operation of the device is possible if a certain temperature regime is maintained in the room. The optimal room temperature is +18…+22º C. Recommended air humidity is no more than 75%.
The device should be located in a place protected from direct sunlight. It must be placed at a distance of at least 1 m from heating devices; for air circulation, a space of 5 cm must be left on each side. Remove the packaging from the device, remove all components from the film. It is recommended to wash the refrigerator with soapy water and wipe dry. You can install all the components yourself or with the help of a specialist.
Prepare in advance the room in which the Atlant refrigerator will be located
You need to transport the freezer by carefully securing it and covering it with foam to prevent it from beating on the road. Please note that when transporting in the cold season (less than +10 ºС), you must wait 4-5 hours at room temperature before connecting the device to the network.
Also
Advantages of Atlant models
Atlant two-chamber refrigerators are considered reliable and durable refrigerators that show excellent performance. Atlant refrigerators are easy to care for and adjust the temperature inside the chambers. You can even turn off one of the cameras for a while. Double-compressor refrigerators work smoothly and allow you to quickly freeze and maintain the temperature of frozen foods.
When purchasing a two-compressor refrigerator, you should know that at any time you can completely turn off the freezer in the Atlant refrigerator, if necessary. This will save on electricity and maintain the functionality of the entire refrigerator. A corresponding sound will notify you that the action is correct.
Defrosting the refrigerator
Any refrigerator requires proper care. Some modern models even have a special sound signal installed, which notifies you of the need for cleaning. One of the important features of Atlant refrigerators is that they require timely defrosting. To do this, you will need to turn off the Atlant two-compressor refrigerator.
Temperature adjustment roller
For a faster procedure for defrosting the freezer, you should remove the ice at the location of the cooling tubes. This is the place in the freezer that is most vulnerable to ice.
Review of existing models
The company produces household refrigerators and freezers, varying in volume and technical capabilities. Popular types are two-chamber home refrigerators with a freezer. Let's take a closer look at their characteristics.
Double chamber with freezer below
This series is divided into refrigerators with one and two compressors of various widths. And also refrigerators with an automatic defrosting system FULL NO FROST.
| View | Variety | Peculiarities |
| Single compressor | Width 54 cm | Compact model for small kitchens, has three freezer compartments |
| Width 60 cm | Standard width models in various designs | |
| Two-compressor | Width 60 cm | Standard width models in various designs |
| Width 70 cm | Spacious model with reduced sound power level | |
| FULL NO FROST | Width 60 cm | Single-compressor refrigerator with multi-flow cold air circulation system |
| Width 70 cm | Spacious single-compressor refrigerator with multi-flow cold air circulation system |
All models have energy efficiency class A or A+.
Double chamber with freezer at the top
This series has a significantly smaller assortment, but it also allows you to choose the model you need in appearance. This includes two-chamber single-compressor refrigerators 60 cm wide with energy efficiency class A.
REFERENCE! Two-chamber refrigerators are the most common and purchased models. However, the manufacturer also produces other versions of this household appliance. Small and compact devices for a small kitchen, single-chamber models, built-in refrigerator.
Built-in
This section presents one model. This is a single-compressor, two-chamber refrigerator. Energy efficiency class A, low noise level. The freezer is located at the bottom and consists of three compartments.
Single chamber
These compact, low-rise models are available in two versions: with and without a freezer. Both types have a high energy efficiency class and a spacious refrigerator compartment. Suitable for a small family and will fit into any space. In terms of technical characteristics, they are not inferior to two-chamber models.
Small-sized
Mini models are only 85 cm high and have a refrigerator volume of 92 liters. There are models with and without a freezer. Energy efficiency class A+. Users will appreciate their compactness and functionality. Suitable for office, cottage, individual use.
Malfunctions
The instructions for the Atlant two-chamber refrigerator contain recommendations on what to do if the refrigerator turns on noisily, spontaneous defrosting occurs, and answers to other questions. Also, during operation, minor failures may occur: a burnt out light bulb, a broken shelf, a cracked handle or drawer.
In this case, you need to contact the manufacturer's official website. In the “Service” section there are addresses of stores where you can buy parts that have become unusable. If you can’t fix the problem yourself, a technician from the service center will help.
How do you like the article?
